I have moto e android 4.4 rooted stocked rom
wiped data, dalvic, and cache before flashing
I tried flashing cm12.1 (latest build) in my moto e using cwm recovery
But it bootloops....
wiped partition too, then again flashed it but it again bootloops..
Any solution ???
What should I do?
use TWRP... :/
booo159159 said:
use TWRP... :/
Click to expand...
Click to collapse
thanks for the reply.
i have already used cwm recovery.
how to use that.. can you explain?
mrravi said:
thanks for the reply.
i have already used cwm recovery.
how to use that.. can you explain?
Click to expand...
Click to collapse
flash twrp and select the appropriate options shown on screen.
Search for TWRP in MOTO E forum download it and flash it on your phone using minimal adb and fastboot.
next time when you'll boot into recovery, it will boot into TWRP (team win recovery project) instead of CWM. follow same steps - wipe EVERYTHING. flash rom, flash gapps and BAM.
booo159159 said:
use TWRP... :/
Click to expand...
Click to collapse
Using twrp 2.8.5.0. But getting same problem in my xt1022 moto e. it stuck on bootloop of cm12.1.. What to do..??
after 2 months??
use latest version of TWRP 2.8.7.0
if it still bootloops you may need to flash cm11 first (can be found in ROMs section) let it boot and when it successfully starts then reboot to recovery and wipe everything and flash latest cm12.1
try It... many users have reported that this solution works for them
Ya...TRy First CM11 then CM12
Related
hello,
i'm using htc one x+ (enrc2b) ..as i installed cyanogenmod 11 snapshot nd completed the process successfuly..but iam unable to launch cyanogenmod through switching on the device or by reboot..the cm logo goes on spining..but while selecting recovery in bootloader cyanogenmod launches and works fine..and even in soft reboot its working fine.. but in normal power on or reboot facing the problem..
please help me out....thanks in advance
htcluvr said:
hello,
i'm using htc one x+ (enrc2b) ..as i installed cyanogenmod 11 snapshot nd completed the process successfuly..but iam unable to launch cyanogenmod through switching on the device or by reboot..the cm logo goes on spining..but while selecting recovery in bootloader cyanogenmod launches and works fine..and even in soft reboot its working fine.. but in normal power on or reboot facing the problem..
please help me out....thanks in advance
Click to expand...
Click to collapse
Did you flash the boot.img? If yes, did you wipe /system, /data and /cache in before installing the rom?
yes
htcluvr said:
hello,
i'm using htc one x+ (enrc2b) ..as i installed cyanogenmod 11 snapshot nd completed the process successfuly..but iam unable to launch cyanogenmod through switching on the device or by reboot..the cm logo goes on spining..but while selecting recovery in bootloader cyanogenmod launches and works fine..and even in soft reboot its working fine.. but in normal power on or reboot facing the problem..
please help me out....thanks in advance
Click to expand...
Click to collapse
reaper90 said:
Did you flash the boot.img? If yes, did you wipe /system, /data and /cache in before installing the rom?
Click to expand...
Click to collapse
yes, i flashed the boot.img from cm zip & before and after installing the cm i wiped sys,chache nd dalvike chache..but cm is working only in recovery mode..why..?? pls help me out..tanx in advance
Which recovery are you using? I flashed cm11 snapshot just yesterday with twrp and flashed boot.img from the zip and it's fine.. I came from viper x+ 2.1.1 btw..
Try changing your recovery..
Hope this helps
htcluvr said:
yes, i flashed the boot.img from cm zip & before and after installing the cm i wiped sys,chache nd dalvike chache..but cm is working only in recovery mode..why..?? pls help me out..tanx in advance
Click to expand...
Click to collapse
how long did you wait for first time boot? this may take some more time. also, you need latest TWRP 2.8.0.2 or CWM 6.0.4.8 to install 4.4 roms. then follow these simple steps:
1. flash boot.img in fastboot
2. in recovery, wipe /system, /cache, /data (without /media)
3. install rom.zip file and gapps package of your choice.
i have samsung s2 GT-I9100, version of 4.2.2, I9100XXMS2, im using Omega v13 rom, i want to change it to cm11 kitkat version, i dont know the steps, i cant just flash it using cwm 6.4, always says aborted, cant open the zip file of cm11 pls help TIA
yrragarry said:
i have samsung s2 GT-I9100, version of 4.2.2, I9100XXMS2, im using Omega v13 rom, i want to change it to cm11 kitkat version, i dont know the steps, i cant just flash it using cwm 6.4, always says aborted, cant open the zip file of cm11 pls help TIA
Click to expand...
Click to collapse
First make a rom backup of your 4.2.2 incase if something goes wrong and you want to restore back.
Then download the latest recovery version, twrp or cyanogenmod
Download cm11
Flash the newest recovery,
Reboot into recovery
Format data/factory reset
Wipe /system
Wipe /dalvik-cache
Flash cm11
Flash kitkat gapps
Reboot.
Enjoy cm11.
The reason why you need latest recovery is because cm11(kitkat) needs selinux enabled recoveries, else it will say something like aborted, set_metadata_recursive failed.
Goodluck with flashingcm11!
wulsic said:
First make a rom backup of your 4.2.2 incase if something goes wrong and you want to restore back.
Then download the latest recovery version, twrp or cyanogenmod
Download cm11
Flash the newest recovery,
Reboot into recovery
Format data/factory reset
Wipe /system
Wipe /dalvik-cache
Flash cm11
Flash kitkat gapps
Reboot.
Enjoy cm11.
The reason why you need latest recovery is because cm11(kitkat) needs selinux enabled recoveries, else it will say something like aborted, set_metadata_recursive failed.
Goodluck with flashingcm11!
Click to expand...
Click to collapse
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
yrragarry said:
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
Click to expand...
Click to collapse
Is it corrupt maybe?
Did you downloaded cyanogenmod for the right device?(Probably you have but just in case)
Are you really using the latest recovery?
Better way, what error does it shows, why does it aborts.
yrragarry said:
tnx for the reply sir, but i already tried this way for many times, the file cm11 nightly always aborted,not continuing the updating, is there any ways or steps?
Click to expand...
Click to collapse
YOu need to first install Kitkat compatible cwm recovery to install kitkat rom in i9100 .. So first download i9100kitkat compatable recovery (google the same to find it) flash it via odin or normal and reboot recovery now .. Now you can full wipe, wipe cache data partitions format system and flash the laest cm11 + gapps with out any problems
[Q] Stuck at "Warning Bootloader Unlocked" screen after flashing CyanogenMod 12.1
Please help..
I flashed Cm 12.1 24-6-2015 nightly over other nightly previously released..
wiped everything before and after flashing..
then rebooted system...
now it does not go ahead...
What to do ???
Please help...ASAp:crying::crying::crying::crying:
#varunpatil said:
Please help..
I flashed Cm 12.1 24-6-2015 nightly over other nightly previously released..
wiped everything before and after flashing..
then rebooted system...
now it does not go ahead...
What to do ???
Please help...ASAp:crying::crying::crying::crying:
Click to expand...
Click to collapse
Installed themes? Anyway, goto TWRP RECOVERY, WIPE only SYSTEM and flash new nightly and reboot. .. See if boots
Adarsh1998 said:
Installed themes? Anyway, goto TWRP RECOVERY, WIPE only SYSTEM and flash new nightly and reboot. .. See if boots
Click to expand...
Click to collapse
i wiped everything..
now its showing no os installed
what to do??
help..im noob
#varunpatil said:
i wiped everything..
now its showing no os installed
what to do??
help..im noob
Click to expand...
Click to collapse
Flash the rom zip again, see if zip downloaded correctly.
Adarsh1998 said:
Flash the rom zip again, see if zip downloaded correctly.
Click to expand...
Click to collapse
ha......it worked....i flashed again the same ROM... thanks
try rebooting via recovery and then restore the backup if u took any.
then flash it again. this should work.
Hello. Im sorry for my english. I have just got moto e xt1021. It had custom rom without gapps. I went to recovery, it was cyanogen mod recovery there was no option wipe install etc. I downloaded twrp manager apk and installed it, i did reboot to recovery, i downloaded rom and gapps, i did wipe next flash rom and flash gapps. When i reboot system i only see warning bootloader unlocked. I was waiting 5 minutes and nothing happened. Can you help me guys?
kubatbg7 said:
Hello. Im sorry for my english. I have just got moto e xt1021. It had custom rom without gapps. I went to recovery, it was cyanogen mod recovery there was no option wipe install etc. I downloaded twrp manager apk and installed it, i did reboot to recovery, i downloaded rom and gapps, i did wipe next flash rom and flash gapps. When i reboot system i only see warning bootloader unlocked. I was waiting 5 minutes and nothing happened. Can you help me guys?
Click to expand...
Click to collapse
Try clean flash again or flash stock firmware
Do you have twrp 3.0.2?
Sent from my Moto E ?
hi i tryed to convert my redmi note 4x to global when flashing with mi flash tool i did it without clean and after that firmware finish installing but got stuck in bootloop now i flashed twrp and tryed to flash custom rom but again bootloop when i check my storage it shows 9gb now when its actual is 32gb i think i disturbed partitions any solution available?
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
ArK96 said:
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
Click to expand...
Click to collapse
awais_666 said:
hi i tryed to convert my redmi note 4x to global when flashing with mi flash tool i did it without clean and after that firmware finish installing but got stuck in bootloop now i flashed twrp and tryed to flash custom rom but again bootloop when i check my storage it shows 9gb now when its actual is 32gb i think i disturbed partitions any solution available?
Click to expand...
Click to collapse
@ArK96 is right but the only thing i suggest is to, flash miui and lazyflasher first so as to properly set up the initial firmware, and partitioning. After miui boots properly, you can do anything you want. :highfive:
ArK96 said:
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
Click to expand...
Click to collapse
thank you for a quick reply yes i am able to go into twrp and i did format system data cache dalvik and internal storage and after wipe did format too but still stuck at same issue and when i open the internal storage in my computer it shows only 9gb storage
MyNameIsRage said:
@ArK96 is right but the only thing i suggest is to, flash miui and lazyflasher first so as to properly set up the initial firmware, and partitioning. After miui boots properly, you can do anything you want. :highfive:
Click to expand...
Click to collapse
ok so the normal global firmware will do? i didnt do with lazyflasher but will do it now
awais_666 said:
ok so the normal global firmware will do? i didnt do with lazyflasher but will do it now
Click to expand...
Click to collapse
you mean the global rom? yes the one you downloaded from en.miui.com
MyNameIsRage said:
you mean the global rom? yes the one you downloaded from en.miui.com
Click to expand...
Click to collapse
yes thats the one downloading now thank you guys for quick response ill update once done
@MyNameIsRage thank you for correcting me.
Yes. Please do flash MIUI and lazy first. Looks like you messed up your partitions.
Peace.
hey guys i tryed the following method luckily now storage is shown as 23 gb but when i flash miui rom in twrp the process doesnt complete its like the process bar goes till 95 percent and after that it keeps flashing but nothing happening i left the phone like this for 2 hours for 2 times but nothing happened am i doing something wrong here
awais_666 said:
hey guys i tryed the following method luckily now storage is shown as 23 gb but when i flash miui rom in twrp the process doesnt complete its like the process bar goes till 95 percent and after that it keeps flashing but nothing happening i left the phone like this for 2 hours for 2 times but nothing happened am i doing something wrong here
Click to expand...
Click to collapse
After flashing MIUI and lazy you flashed MIUI again is that what you are saying?
ArK96 said:
After flashing MIUI and lazy you flashed MIUI again is that what you are saying?
Click to expand...
Click to collapse
nop i formatted everything and then install miui rom for redmi note 4x which doesnt finish installing
awais_666 said:
nop i formatted everything and then install miui rom for redmi note 4x which doesnt finish installing
Click to expand...
Click to collapse
Go here and download the Global Stable worldwide release version firmware.
Boot into twrp wipe and format everything. Also after that reflash TWRP again using fastboot.
Once reflashed boot into TWRP and again perform a full wipe and format, then install the downloaded firmware zip. After that reboot TWRP and try flashing MIUI.
ArK96 said:
Go here and download the Global Stable worldwide release version firmware.
Boot into twrp wipe and format everything. Also after that reflash TWRP again using fastboot.
Once reflashed boot into TWRP and again perform a full wipe and format, then install the downloaded firmware zip. After that reboot TWRP and try flashing MIUI.
Click to expand...
Click to collapse
cool will try that in a while just a quick question i read somewhere that do the same process with red wolf recovery rather then twrp does that make any difference
awais_666 said:
cool will try that in a while just a quick question i read somewhere that do the same process with red wolf recovery rather then twrp does that make any difference
Click to expand...
Click to collapse
Yes. Red wolf is more MIUI friendly, it is made with OTA survival in mind. But your issue is that the ROM is not getting flashed. You can try what I said above about TWRP reflash, if it doesn't work you can go ahead and try redwolf. REDWOLF is nothing but modded TWRP, base code is still TWRP.
ArK96 said:
Yes. Red wolf is more MIUI friendly, it is made with OTA survival in mind. But your issue is that the ROM is not getting flashed. You can try what I said above about TWRP reflash, if it doesn't work you can go ahead and try redwolf. REDWOLF is nothing but modded TWRP, base code is still TWRP.
Click to expand...
Click to collapse
hey mate finally i got time to do the procedure i flashed the kernel that you told and on top of it the firmware and lazyflasher it went through in just few minutes and was all done and working perfectly now thanks alot
awais_666 said:
hey mate finally i got time to do the procedure i flashed the kernel that you told and on top of it the firmware and lazyflasher it went through in just few minutes and was all done and working perfectly now thanks alot
Click to expand...
Click to collapse
Good job mate.