Viewpad 7a 'Enhanced' (RC1)
Viewpad 7a is a quick and dirty modification of the stock firmware from Viewsonic. This should be a decent alternative to the stock image, with improved performance and appearance.
Highlights:
- Removed the 'Welcome' logo and replaced with stock android boot animation.
- Replaced stock boot image with overclocked version: Credit goes to TJ Style @ Modaco.
- Minor framework modifications (got rid of annoying white status bar, and misc images).
- All packaged applications remain, but I will add or remove any upon request.
- Enabled hardware acceleration.
Notes:
- Firmware should work with compatible devices such as: Cherry Mobile Superion, Commtiva Linx N700, Olivepad VT-100, Spice MI700, and Camangi FM600....but I do not have these devices, so I cannot verify. As always make a backup before installing any custom firmwares.
Known Issues:
- You may receive an error from Swype upon initial use to the effect that 'it's not meant for this firmware and may be limited'. I haven't had any issues since seeing this, and have disregarded it for the time being.
- Root condition has been known to intermittently go away. Remedy this by running Super One Click again after you've flashed the ROM.
****************************************************************************************************
I'm currently working on a Vanilla AOSP port of Gingerbread for this device, and this will be the main focus of my effort. I will try my best to answer any bug reports or requests for changes to this firmware, but won't make any promises.
As always a big thanks to everyone in the Android community that shares they're knowledge and support.
To install this firmware use ClockworkMod to flash the zip file. (I use version 2.5.1.2). Information on rooting and installing an alternative recovery partition is available here.
DISCLAIMER: I cannot be held liable for anything you do to your Viewpad 7 (or equivalent device). Make sure you are comfortable with recovery tools, such as ClockworkMod, before proceeding.
****************************************************************************************************
Update (August 22nd, 2011): I've deactivated the download link until I get time to put out a better update with ITE support.
If I am not wrong this device is similar to Commtiva N700/ Spice Mi-700/ Olive Pad VT-100.
Nice to hear someone taking the initiative for development on this device
I've added the compatible devices I'm aware of to the first post. I may take advantage of CM scripting in the Gingerbread port. Will update when I have time. I've attached a screenshot from the froyo firmware below if anyone is interested.
I've been using it for the past two days without any issues. I borrowed a SIM card from a friend today to test the data connectivity and call function. Both work flawlessly. The battery life isn't as good with the CPU overclocked, but it's worth it for the extra boost of performance.
I was planning to get this device with my first salary which is few months from now
BTW, To make things easier you can use Cyanogen 7 which I think is having support for similar hardware.
Can MeeGo 1.2 be ported for this Device?
It will be releasing this April.
lakehousetech said:
I've added the compatible devices I'm aware of to the first post. I may take advantage of CM scripting in the Gingerbread port. Will update when I have time. Here's a screenshot from the froyo firmware:
I've been using it for the past two days without any issues. I borrowed a SIM card from a friend today to test the data connectivity and call function. Both work flawlessly. The battery life isn't as good with the CPU overclocked, but it's worth it for the extra boost of performance.
Click to expand...
Click to collapse
Looks good.
But I prefer Android with its vanilla looks.
Can LCD density be used with this Tablet? does it work?
Please check that out.
Nice to see someone finally making a custom ROM for this device. Would be nice to have something like HyperDroidGBX for the HD2 using AOSP, Redux, CyanogenMod.... that's one hell of a nice piece of Gingerbread.
Hopefully the Viewpad 7 will get its own sub-forum and your ROM will be the first in it.
Cheers!
Cyko
harishgayatri said:
Can MeeGo 1.2 be ported for this Device?
Click to expand...
Click to collapse
I don't know enough about MeeGo to comment, but I imagine it is possible...just not sure how feasible or worthwhile it would be to port it.
harishgayatri said:
Can LCD density be used with this Tablet? does it work?
Click to expand...
Click to collapse
Yes LCD density can be modified and it works.
cyko said:
Hopefully the Viewpad 7 will get its own sub-forum
Click to expand...
Click to collapse
I think if there's enough community interest XDA may create a dedicated forum for these devices. We'll see.
Thank you for your work. On the Russian forum owners viewpad 7 Your beginnings of this work has generated enormous interest. Would you in their versions of the firmware to include more locations? Good luck in your work. Sorry for the English.
sanata said:
Thank you for your work. On the Russian forum owners viewpad 7 Your beginnings of this work has generated enormous interest. Would you in their versions of the firmware to include more locations? Good luck in your work. Sorry for the English.
Click to expand...
Click to collapse
Adding a Russian keyboard and locales would not be difficult if you know of another ROM that is using them in Froyo, or perhaps someone has them on a repo somewhere?
Great to see this!
I just bought a Viewpad for my wife, so this is perfect!
smnc said:
Great to see this!
I just bought a Viewpad for my wife, so this is perfect!
Click to expand...
Click to collapse
Glad I could help! Let me know if you have any suggestions for future changes.
lakehousetech said:
Viewpad 7a 'Enhanced' (RC1)
Viewpad 7a is a quick and dirty modification of the stock firmware from Viewsonic. This should be a decent alternative to the stock image, with improved performance and appearance.
Highlights:
- Removed the 'Welcome' logo and replaced with stock android boot animation.
- Replaced stock boot image with overclocked version: Credit goes to TJ Style @ Modaco.
- Minor framework modifications (got rid of annoying white status bar, and misc images).
- All packaged applications remain, but I will add or remove any upon request.
- Enabled hardware acceleration.
Notes:
- Firmware should work with compatible devices such as: Cherry Mobile Superion, Commtiva Linx N700, Olivepad VT-100, Spice MI700, and Camangi FM600....but I do not have these devices, so I cannot verify. As always make a backup before installing any custom firmwares.
Known Issues:
- You may receive an error from Swype upon initial use to the effect that 'it's not meant for this firmware and may be limited'. I haven't had any issues since seeing this, and have disregarded it for the time being.
****************************************************************************************************
I'm currently working on a Vanilla AOSP port of Gingerbread for this device, and this will be the main focus of my effort. I will try my best to answer any bug reports or requests for changes to this firmware, but won't make any promises.
As always a big thanks to everyone in the Android community that shares they're knowledge and support.
To install this firmware use ClockworkMod to flash the zip file. (I use version 2.5.1.2). Information on rooting and installing an alternative recovery partition is available here.
DISCLAIMER: I cannot be held liable for anything you do to your Viewpad 7 (or equivalent device). Make sure you are comfortable with recovery tools, such as ClockworkMod, before proceeding.
Download Link:
http://www.mediafire.com/?8plz5l9td3swith
Click to expand...
Click to collapse
I have clockworkmod recovery installed, works, and overclock boot.img installed works too.
My VIEWPAD 7 has still stock ROM with Chinese handwriting touch, if I flash this custom ROM, do I loss Chinese handwriting function ?
Does all wifi, bluetooth, GPS, 3G network, multi-touch remain the same ?
Also, I am looking for App2SD script, to extend my internal /data/apps -> mSD card (ext2/3/4) paritition too.
thanks, cheers
James
keijames said:
I have clockworkmod recovery installed, works, and overclock boot.img installed works too.
My VIEWPAD 7 has still stock ROM with Chinese handwriting touch, if I flash this custom ROM, do I loss Chinese handwriting function ?
Does all wifi, bluetooth, GPS, 3G network, multi-touch remain the same ?
Also, I am looking for App2SD script, to extend my internal /data/apps -> mSD card (ext2/3/4) paritition too.
thanks, cheers
James
Click to expand...
Click to collapse
I've done some tricks used a symbolic link for moved /data/dalvik-cache to /cache I will free up a lot of space in /data
Also the /cache partition is so huge. Is there any method to re-partition it?
TO: mp9_sit
This is good news, can you share your steps pls.
thanks
James
Sure, I will prepare some steps and open a new thread within this 2 days
Update: Already posted http://forum.xda-developers.com/showthread.php?p=12742585
Flashed successfully on my Wellcom A800 WePAD, Thailand model. Works really fast! Thank you so much!
lakehousetech said:
Viewpad 7a 'Enhanced' (RC1)
Viewpad 7a is a quick and dirty modification of the stock firmware from Viewsonic. This should be a decent alternative to the stock image, with improved performance and appearance.
Highlights:
- Removed the 'Welcome' logo and replaced with stock android boot animation.
- Replaced stock boot image with overclocked version: Credit goes to TJ Style @ Modaco.
- Minor framework modifications (got rid of annoying white status bar, and misc images).
- All packaged applications remain, but I will add or remove any upon request.
- Enabled hardware acceleration.
Notes:
- Firmware should work with compatible devices such as: Cherry Mobile Superion, Commtiva Linx N700, Olivepad VT-100, Spice MI700, and Camangi FM600....but I do not have these devices, so I cannot verify. As always make a backup before installing any custom firmwares.
Known Issues:
- You may receive an error from Swype upon initial use to the effect that 'it's not meant for this firmware and may be limited'. I haven't had any issues since seeing this, and have disregarded it for the time being.
****************************************************************************************************
I'm currently working on a Vanilla AOSP port of Gingerbread for this device, and this will be the main focus of my effort. I will try my best to answer any bug reports or requests for changes to this firmware, but won't make any promises.
As always a big thanks to everyone in the Android community that shares they're knowledge and support.
To install this firmware use ClockworkMod to flash the zip file. (I use version 2.5.1.2). Information on rooting and installing an alternative recovery partition is available here.
DISCLAIMER: I cannot be held liable for anything you do to your Viewpad 7 (or equivalent device). Make sure you are comfortable with recovery tools, such as ClockworkMod, before proceeding.
Download Link:
http://www.mediafire.com/?8plz5l9td3swith
Click to expand...
Click to collapse
I order a viewpad 7 from amazon on saturday. I had some concern about it and was wondering if I made the right choice. Now that I see that you are working on increasing its performance, I feel comfortable with my choice now.
I install gappinstaller v5 on a archos 70 and 101 with no problem by following the step by step direction. I dont have my viewpad 7 as yet but I hope the installation goes smoothly. I donate
I flashed it to a WellcoM A800 and the GSM radio doesn't work anymore. Whatever I do it indicates that I'm in airplane mode. I tried with three different SIM cards with the same result.
Please advise...
Thanks
lakehousetech said:
Glad I could help! Let me know if you have any suggestions for future changes.
Click to expand...
Click to collapse
The ViewPad finally arrived this morning. Got it all rooted, CWM'd and the ROM installed.
Nice work!
The wife will love it when she gets home tonight!
I'll definately let you know if I come up with any suggestions.
Well, one suggestion now:
move all the non-essential apps from system to data so they're easily removable.
Actually I can do that myself in a little bit...
Looking forward to Gingerbread!
Thanks again!
Dear all,
Has anybody so far successfully installed an Android Rom on the Meizu MX3?
Any hint would be mostly appreciated!
I could not find anything via Google or forum search...
Cheers
Julian
I realize this is reviving an old-ish thread, but I too am interested in any info regarding the above.
Due to high pricing, the MX3 is a possible option for me soon.
Hey iSilence,
I have not made any progress so far on the issue. However, I managed to install the Google Playstore and thereby got most of the relevant software related functions I need on the MEIZU.
Would still prefer a nice Android on that machine.
Cheers
Sypher said:
Hey iSilence,
I have not made any progress so far on the issue. However, I managed to install the Google Playstore and thereby got most of the relevant software related functions I need on the MEIZU.
Would still prefer a nice Android on that machine.
Cheers
Click to expand...
Click to collapse
From what I've found out till now, the issue with Meizu is that the bootloader is locked.
The furthest people have gotten was to install MIUI on the MX2, and there are a few fixes/mods for the MX3.
MIUI may be possible on the MX3, the device is still pretty fresh so there's hope.
I don't know about stock Android though. One can hope.
Hi, sorry if I am posting in the wrong place.
I have the OnePlus 2, recently installed the latest build of Resurrection Remix after the update of Oxygen OS 3.5.5. I did a full wipe, data partition included.
There is one app that doesn't work right anymore and I can't tell if it is because of the update to Nougat or if there is an issue in how it works with the rom.
The app name is Duo Mobile, support Android 4.0 and up. I am not able to add the different services by scanning QR code or links by SMS. This was working fine on Oxygen 3.0.2.
The official answer from Duo support is that they can't guarantee support for custom roms.
Any help would be greatly appreciated.
Anyone having the same issues with this app?
Any logs I could gather to troubleshoot?
Without the proper troubleshooting done on your part there is little anyone will be able to tell you. Spend a few days and read up on log cats and other troubleshooting basics. Mainly when asking questions in a developers forum.
Hello!
I'm a bit of a noob when it comes to android development, but since BLUBOO pulled their Android 6.0 update for their 5.1 Picasso 3G phone, I was wondering if a port would be at all possible? I found many guides on the internet but I've bricked a few phones in the past and thought I would ask to see if anyone else has tried/achieved this at all.
I found a ROM that the Picasso 4G uses that is a 6.0 rom - Would this be okay to port or am I going to overwrite the bootloader or whatever I did to my last phone and have another brick to add to my collection, lol?
TurnipMistress said:
Hello!
I'm a bit of a noob when it comes to android development, but since BLUBOO pulled their Android 6.0 update for their 5.1 Picasso 3G phone, I was wondering if a port would be at all possible? I found many guides on the internet but I've bricked a few phones in the past and thought I would ask to see if anyone else has tried/achieved this at all.
I found a ROM that the Picasso 4G uses that is a 6.0 rom - Would this be okay to port or am I going to overwrite the bootloader or whatever I did to my last phone and have another brick to add to my collection, lol?
Click to expand...
Click to collapse
I know, this thread might be dead for a long time, but since I stumbled upon this thread in order to resurrect my good ol' Picasso, there might be people finding this interesting:
on 4pda, there can be found some custom roms for the Bluboo Picasso 3g. There is also a 6.0-Rom.
https://4pda.ru/forum/index.php?showtopic=711170&st=12120#entry67242059 (I use chrome for website translation)
hello, I bring you a mini tutorial to recover this mobile. In the file is the tutorial in text format, both in English and Spanish.inside the zip is the rom stock with android 6 for this model, it is installed with sp flash tool.
added installation of twrp with android 6.0 (rom bravis), and custom rom 7.1.2 crDroid.
This custom rom is amazing and has many customization options and the system is rooted by default.
https://mega.nz/#F!HV9zVahC!o4SFKDZLT7a08hkiZMRNnA
Photos
https://mega.nz/#F!WclkTAoD!RLK0N0qWnQkeFYYgj1nRWA
"I would like to add that the work is not mine, all the credits and thanks to the guys at the 4pda Russian forum. I'm just sharing it because this was picking up dust in the cloud".
Any chance somebody can share sources for this phone? I am trying to build a fresh ROM for the phone.
bernavaldiesel1, thanks a million man, I've been looking for the working twrp for ages