Samsung Galaxy ACE GT -S5830 doesn't Start after Charged - Android Q&A, Help & Troubleshooting

I'm on Custom Rom "The Ultimatum" http://forum.xda-developers.com/showthread.php?t=2234221
Used for about 21 hours (Including Standby time) The Phone was turned off being emtyness the battery.
I'm Turned on the phone during the battery being weak....
And the display/screen only show the light flashing, doesn't show boot anymation... only the light with Blank screen No samsung logo and no sound ....Like flickering light...... Until the battery completely empty and the phone was turned off automatically cos' All the phone switches/button did not function.
Plug the phone to Charger.... The Display/Screen still same Doen't Show battery status or any ... only the light with Blank screen Like flickering light...... Screen on... Screen off... on.... offf....
keep in charger about 2 hours
After that,... i replace the battery... insert and swich the phone On ... still same.... doesn't start and doesn't show bootloading
Problem
1. Phone dosen't show boot animation
2. Can not go to CWM/ Recovery Mode when press Power and Home
Download Mode Still no Problem it's ok
The action that has been carried out
1. Flashing Firmware Again Via Odin Multi Dowloader v4.42
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> csc.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Still get the same Problem the phone doesn't start can not go to recovery mode
Thank you for XDA and for All
Sory for my bad english

O.... sorry i forget... i mint samsung galaxy ace gt-s5830 doesn't show samsung logo on start

Related

[Q] HELP.... XXKPH and coderom too....

sorry of my bad english, i am russian...
i am tested at 2.3.4 XXKPH and XXKPH Coderom too////
For me problem here what... Before noticed in 2.3.3 too...
For example begin to listen music is a second 2 - 30 secs. begin to brake a sound, then at once music is turned off and beats out a record player on a main screen, similarly and in market but there after the search of appendix open a page with the found application pair of seconds and knocks out on the main screen of market
You need to flash a multi file 2.2.1 rom first, because they are the only ones that include the first and second stage bootloaders (the APPBOOT tar.md5).
The only one I know of is S5830JPKC2.
Download from here:
http://www.samfirmware.com/WEBPROTECT-s5830.htm
Is the second arabic one.
Then you can flash any rom you like.
to ilarrain
so i must flash S5830JPKC2 first, and after the coderom?
oh my god... i have a brick....
flashing with odin S5830JPKC2
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss download..
<1> 1/5 Finished.
<1> boot.img download..
<1> 2/5 Finished.
<1> recovery.img download..
<1> 3/5 Finished.
<1> system.rfs download..
<1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
<2> Added!!!
<2> Detected!!!
<2> Disconnected!!!
<2> Detected!!!
<2> Disconnected!!!
<2> Detected!!!
and they must reboot but nothing.... they are brick....
when connect phone with usb. odin see com port but
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
and nothig....
Koldunchik said:
oh my god... i have a brick....
flashing with odin S5830JPKC2
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss download..
<1> 1/5 Finished.
<1> boot.img download..
<1> 2/5 Finished.
<1> recovery.img download..
<1> 3/5 Finished.
<1> system.rfs download..
<1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
<2> Added!!!
<2> Detected!!!
<2> Disconnected!!!
<2> Detected!!!
<2> Disconnected!!!
<2> Detected!!!
and they must reboot but nothing.... they are brick....
Click to expand...
Click to collapse
read this http://forum.xda-developers.com/showthread.php?t=1071970
that should resurrect your phone.
princenoob said:
read this http://forum.xda-developers.com/showthread.php?t=1071970
that should resurrect your phone.
Click to expand...
Click to collapse
Oh thanks it realy help me...
Koldunchik said:
Oh thanks it realy help me...
Click to expand...
Click to collapse
LOL, good to know that it helped, just posting THREAD no searching(sorry, but search before you making the new thread), not very nice. But of course we all try to help!

Galaxy Ace BRICK! Please Help!

Hello, everyone.
I want to downgrade my galaxy ace from Gingerbread 2.3.5 to Froyo 2.2.1, but when i flashed it via Odin V.4.38, the flashing status was:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss download..
<1> 1/5 Finished.
<1> boot.img download..
<1> 2/5 Finished.
<1> recovery.img download..
<1> 3/5 Finished.
<1> system.rfs download..
<1> 4/5 Finished.
<1> csc.rfs download..
<1> 5/5 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Now, the Ace doesn't recover and when i press the key combination, this message appears:
Mode RAMDUMP
(ARM9)
I don't understand what big partition size means, i suppose that's the trouble. But i don't know what to do.
Also, when the flashing process is on Close serial port and wait until rebooting. the ACE turns off without rebooting and exits downloading mode.
So, I can't save my ACE.
Is there any solution ?
Thanks.
PD 1. I have already read this forum about ACE unbricking but the solution is not functioning in my phone.
PD 2. The ACE doesn't turn on and i've repeated the flashing process without any signal.
Maybe this will be helpful:
http://forum.xda-developers.com/showthread.php?t=1174163
If you cant get it into download mode/recovery(for restore), the only road is the road to a Samsung servicecenter.
Cheers
egmont said:
Hello, everyone.
I want to downgrade my galaxy ace from Gingerbread 2.3.5 to Froyo 2.2.1, but when i flashed it via Odin V.4.38, the flashing status was:
Click to expand...
Click to collapse
The log (big partition size) is absolutely normal while flashing a new rom, with Odin.
Can you make your Ace go into downloading mode?
happily1986 said:
Can you make your Ace go into downloading mode?
Click to expand...
Click to collapse
Yes, it only goes into Download mode, but the others mode not !
from that log, u have successfully flashing ur phone, it should reboot into the new fresh rom after that. and "big partition size" log is normal, that message appear even when flashing stock rom.
and i think u got into that ramdump mode is because ur pressing the wrong button combination.
Code:
vol down+home+power=download mode
home+power=recovery mode
if u can go into recovery mode, try to wipe data/factory reset.
egmont said:
Yes, it only goes into Download mode, but the others mode not !
Click to expand...
Click to collapse
First I would try to make a factory reset, and than if this won't work, I would try flashing again a new rom. If download mode is working I guess you're good to go.
I unbricked my phone with docking the motherboard. Did it at my brothers work at samsung :3
Sent from my GT-S5830 running Miui

[Q] Please Help! Dead while Installing Arkas Custom ROM for my Galaxy 551 with Odin

Hi
I tried to install Arkas 1.2.1 Ganymede 4 custom ROM with Odin but my device doesn't reboot again
I tried to install PerseusXJ but same thing happens. pls help me
sry for my bad English
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> boot.img download..
<1> 1/4 Finished.
<1> recovery.img download..
<1> 2/4 Finished.
<1> system.rfs download..
<1> 3/4 Finished.
<1> data.rfs download..
<1> 4/4 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Solved- i dont remember how but my device is working now :laugh:

How to make a hard reset on pattern-locked and unrooted Galaxy5?

Hi
I'm trying to hard reset Galaxy 5. It's my friends's phone actually. It's locked with pattern and he forgot the pattern. Now the galaxy is asking for GMail account that he doesn't know too. I tried to enter mine, but there is no internet conection on his phone. I tried to turn it on with the power key, but it's like i never clicked on anything.
I tried with ODIN using these files:
OPS File: C:\Users\Puma9251\Desktop\EUROPA_I5508_v1.0.ops
One package: C:\Users\Puma9251\Downloads\ClockworkMod-Galaxy5-RFS-v0.7.tar
I'm trying to install CWM and install custom ROM or at least reset the device,but nothing happens. It'just restarts the device and does not enter in recovery.
Here is log:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
<1> 1/2 Finished.
<1> csc.rfs download..
<1> 2/2 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
I'm conecting the phone in downloading mode (the yellow triangle thing).
What's wrong with that phone? I tried reflash but it\s the same/
insitex said:
Hi
I'm trying to hard reset Galaxy 5. It's my friends's phone actually. It's locked with pattern and he forgot the pattern. Now the galaxy is asking for GMail account that he doesn't know too. I tried to enter mine, but there is no internet conection on his phone. I tried to turn it on with the power key, but it's like i never clicked on anything.
I tried with ODIN using these files:
OPS File: C:\Users\Puma9251\Desktop\EUROPA_I5508_v1.0.ops
One package: C:\Users\Puma9251\Downloads\ClockworkMod-Galaxy5-RFS-v0.7.tar
I'm trying to install CWM and install custom ROM or at least reset the device,but nothing happens. It'just restarts the device and does not enter in recovery.
Here is log:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
<1> 1/2 Finished.
<1> csc.rfs download..
<1> 2/2 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
I'm conecting the phone in downloading mode (the yellow triangle thing).
What's wrong with that phone? I tried reflash but it\s the same/
Click to expand...
Click to collapse
Just install adb on your PC, connect your turned on phone via usb, open console on pc and type adb reboot recovery
Ok,i did it. I managed to go to recovery mode and install SonyStyle ROM. I did wipe cache/data before that. I restarted teh device, i thought i will se loading ROM. No,iot's just showing SAMSUNG logo, i think it's a bootloop. I can't conect it to adb anymore,as i can't turn it on. Can't flash it with ODIN too, it says close port and waiting for restart and the phoen restart itself with dark screen,then SAMSUGN logo and thats all.
Any ideas?!
Have you closed all Kies processes and ran Odin as Administrator?
Sent from my GT-I5500 using xda premium
yes,still notworking.
it gave me this:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "cache.rfs"
<1> e - unknown file - "л<ђMSWIN4.1"
<1> set download environment.
<1> data.rfs download..
<1> 1/1 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
the phone retarted itself with dark screen. after 1 minute it showed me the charging animation. when i restarted it manually odin said "pass"
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
so i cant even reflash it. the phone stayed in samsung logo for a while,then it stayed on it. Nothing appeard to happen. It just says SAMSUNG. Sometimes the screen is going black for a sec and then it says SAMSUNG again.
Try another package.
Sent from my GT-I5500 using xda premium
can you give me links as i have no idea where to search for as the device is not mine
Use the search function and search for CWM recoveries in this forum ( gt-i5500)
Hello, look there http://forum.xda-developers.com/showthread.php?t=1151396&highlight=cwm and you could try with some psyke83's roms. Almost every rom is build on them. I recomend CM10.1 it's stable and everything works.

[Q] GT-I5510L [Callisto] Bricked?

Hi for everyone!
First at all i want to apologise for my bad english.
Now, I want to know if you can help me.
This is the history:
I had a phone flashed with cm-7.2.0-20130125-STABLE-ajay-sdext.zip and it was working.
One day the phone begin in a boot loop.
So, I decide to flash a Stock Rom, but something stranger happens.
When i flash whit odin the rom I5510LVCKPI_I5510LVNOKP5_VNO.zip I see:
ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> csc.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.​The phone reboots start to applying updates and...
Error:Can't Mount /Data Partition
reboot and boot loop again.
What happened?
Thanks,
Martin
@Dr. Cooper do full factory reset this is useful if you will experience boot loops after flashing.
@Ansh2000, thank you for your reaply.
I can't do that because I can't enter to recovery mode.
Only have Downloaded mode and Emergency.
Enviado desde Android
Dr. Cooper said:
@Ansh2000, thank you for your reaply.
I can't do that because I can't enter to recovery mode.
Only have Downloaded mode and Emergency.
Enviado desde Android
Click to expand...
Click to collapse
flash stock rom again using Odin after flashing remove battery and then insert battery press power and t button .
Yes I do that.
I flash the stock rom mentioned above, then Odin send reboot, when booting star tu apply some updates and fail whit error /data partition.
I observe the message in Odin "big partition size" this is normal?
How can I repartition?
Enviado desde Android
Dr. Cooper said:
Yes I do that.
I flash the stock rom mentioned above, then Odin send reboot, when booting star tu apply some updates and fail whit error /data partition.
I observe the message in Odin "big partition size" this is normal?
How can I repartition?
Enviado desde Android
Click to expand...
Click to collapse
Nothing related to re-partitioning.
Just relax...This is a common problem.
Your /cache and /data partitions are ext4 due to CM but stock ROM requires them to be rfs. So, before flashing stock ROM in our galaxy5, we use a "gti5500-rfs-downgrade.tar" file and flash it. Just wait for a few moments until I get one for your device. Stay tuned.
Thank you very much @Bhargav97 !
[email protected]

Categories

Resources