Related
Today v20c was deployed. Last time I tried to update an optimus one with the lg software the phone was bricked. Is there a failsafe guide to update the phone?
Thanks.
Go to service center.
Sent from my LG-P500 using Tapatalk
just put your phone in emergency and use kdzupdater, BUT do not unplug you phone untill it restarts itself. even if there is any error just start over but DO NOT UNPLUG YOU PHONE
Download the kdz file, use tools to get Dz file from kdz,backup NV from lgmdp ,flash dz file using lgmdp software (DZ button at bottom of flash window). Never lose emergency mode.(don't remove battery)
Sent from my LG-P500 using XDA Premium App
Hi Guys, Does anyone know where I can download V20c for Australia
PRoberts said:
Hi Guys, Does anyone know where I can download V20c for Australia
Click to expand...
Click to collapse
How about using one of those ~10 links that were posted here?
chriz74 said:
Today v20c was deployed. Last time I tried to update an optimus one with the lg software the phone was bricked. Is there a failsafe guide to update the phone?
Thanks.
Click to expand...
Click to collapse
today in italy the v20c was released and I updated using the official procedure more than 12 phones.
Maybe you problems with official update procedure could be related to the computer you used for.
I believe that if you follow the procedure on a "clean" computer you will have success. Uninstall all software and drivers related to LG or any other phone. Check in devices if all USB and modem drivers was removed and reboot.
Start installing the LGMobile Update without connect your phone by USB and follow instructions. If you have success uninstalling previous soft and drivers, the LG application will install USB drivers and after you can connect you phone and continue with update.
Good luck
KDZ worked without any hassle. I just deactivated the LG modem before proceeding.
I updated 3 phones with this system.
I updated using lgmdp and now my phone will not get data so no internet unless i am on wifi does anyone know why or how to fx it?????
dislplin01 said:
I updated using lgmdp and now my phone will not get data so no internet unless i am on wifi does anyone know why or how to fx it?????
Click to expand...
Click to collapse
The new baseband does NOT work with the ROM you are using. I do not see why on earth did you flash it. Downgrade it.
doktornotor said:
The new baseband does NOT work with the ROM you are using. I do not see why on earth did you flash it. Downgrade it.
Click to expand...
Click to collapse
it didn't work with my phone in general after flashing the new official update I couldn't get 3g anywhere even on that rom tried flashing a new baseband thru recovery and kdz but nothing had to use kdz to flash original firmware and start over it was a pain in the butt the ROM looked cool but with no data no thank you
Sent from my LG-P500 using XDA Premium App running CM7 over clocked at 806
Well, enjoy your non-working data then. The new baseband will NOT work on CM7, period.
Next time, think about what you are doing.
doktornotor said:
Well, enjoy your non-working data then. The new baseband will NOT work on CM7, period.
Next time, think about what you are doing.
Click to expand...
Click to collapse
You don't understand my data did not work on the official ROM either I did everything it said to do fallowed all the steps and it went just like the post read I rebooted the ROM worked except the data even with the official ROM it would not work I even tried flashing the baseband again for the v20 rom but still nothing and the only way I could get it back was by using kdz and flashing original 2.2 and starting over
Sent from my LG-P500 using XDA Premium App
ZOMG. You are not supposed to use v20? baseband for the ROM you have in signature (CyanogenMod 7.1-RC0 v6.5.5). It will just NOT work.
- Check that you have v10 baseband
- Wipe all, reflash mik's ROM.
- Do NOT flash any other baseband "patch" or whatever similar.
Now you will have perfectly working data.
v20 baseband will ONLY work on official 2.3.3 ROM and ROMs based on that official 2.3.3. ROM.
If you still do not understand this explanation, then kindly stick to stock ROM and do not flash anything at all.
tmobile version of android 2.3
im just gonna wait for the official P509 version.
Ventus_zx said:
im just gonna wait for the official P509 version.
Click to expand...
Click to collapse
Me too. (i need the gingy lib's for wificalling)
Sent from my LG-P509 using XDA App
im just gonna wait for the official P509 version.
Click to expand...
Click to collapse
I'm pretty sure that's why it didn't work for me
Sent from my LG-P500 using XDA Premium App
i also bricked ma phone while flashing official gb. i tried it over again and again. finally i unplugged it. now it isn't responding at all. Wot should i do??
those of you who bricked your phone check the how to's on unbricking, for those that upped to the official gingerbread through LG and dont have data check your carrier APN settings, i had to manually install mine
go into settings, wireless & networks, mobile networks, APN or Acess Point Names
==============================================
EDIT: FOUND A METHOD TO FLASH CHANGED BASEBAND ON ANY STOCK ROM (12-Apr-13) See this related thread for more information
==============================================
I have P765 Asian/Indian Edition of L9.
Checkout below how did I got Original Indian Baseband made for ICS working perfectly along with on European JELLYBEAN.
SITUATION:
I was on JellyBean P760V20B flashed on my P765 Indian L9 device. But as you all know, KDZ includes the BASEBAND too, that means when I flashed P760JB, the European Baseband was also flashed on my Indian Phone. This means I was using European Baseband on my Indian phone in Indian Region. Though, phone was working fine and network was ok but not as better as my previous V10G Indian KDZ ICS Rom. Randomly but rarely, I got my own annoying echo sound, while on voice calls. Call drops in elevators and deep section of my office.
WHAT I DID TO IMPROVE MY NETWORK?
1) Then someday (yesterday lolz) I got an idea. I took CWM BACKUP of my JB with app and data, on external sdcard.
2) Flashed back ICS P765V10G India KDZ, so I was back on my original Indian ROM with Indian Baseband and signal is again great in ICS. While flashing, i rooted it with Lelus method. But this is ICS and how can I stay without JB?
3) Then I started phone in CWM (non-touch) mode, wiped everything and RESTORED BACK CWM BACKUP OF JB, which was taken in first step.
FYI, CWM backup does not contain Baseband, hence can not flash BASEBAND. So this means only ROM is restored, and Indian Baseband from V10G remained in phone at its own reserved place.
4) OPTIONAL: Replaced "rild" file from P765 in "/system/bin/" folder. ATTACHED BELOW IN ZIPPED FORMAT. First take backup of current "rild" before replacing.
/system/lib/lge-ril.so
/system/bin/rild
/system/build.prop
RIL (Radio Interface Layer) file and BASEBAND should always match for 100% network performance on any Android devices. GETRIL application is made exactly for this purpose only. Since long time, I am trying hard to get GETRIL app support for our L9 devices also, by initiating direct interaction with developer.
(As mentioned before replacing RILD file is optional and do it only if you have bad/no network after baseband changed. If still does not work, flash your old KDZ and restore your cwm backup.)
I am again back on perfect Signal, Network, Calls, No echo. The difference is clearly visible in network and calls now no drops in elevators too like it was before.
EVERYTHING ABOVE IS TRICKY BUT VERY EASY TO PERFORM
Now in V20B JB, I see false entry in phone information that my phone is P760 and V20B Baseband, but when I tested it with GETRIL I found that I am on P765V10G Baseband. When I send email to GETRIL developers, it sends email with BASEBAND information as P765V10G. :good:
EDIT: Find some ril files from various roms here.
Hope this helps some of my P765 fellow I must be insane doing all this stuff. lolz :laugh:
Re: Trick to use P765V10G Indian ICS Baseband on P760V20B EUROPEAN JB flashed on P765
V10c is Hong Kong that one?! When I flash kdz the recovery is still here?! And will it still unlock bootloader?!
Sent from my LG-P760 using xda premium
Re: Trick to use P765V10G Indian ICS Baseband on P760V20B EUROPEAN JB flashed on P765
Thanks mahendra ji,
I'll also try this on my device, hope this will solve battery draining problem of JB........
Sent from my LG-P760 using xda premium
hkfree said:
V10c is Hong Kong that one?! When I flash kdz the recovery is still here?! And will it still unlock bootloader?!
Sent from my LG-P760 using xda premium
Click to expand...
Click to collapse
Yes that "rild" file is for hongkong P765 users. You can flash V10C KDZ made for HongKong and use this "rild" for last step.
gdjindal said:
Thanks mahendra ji,
I'll also try this on my device, hope this will solve battery draining problem of JB........
Click to expand...
Click to collapse
I dont know how much battery drain will be reduced but the network will be superb. If you disable some BLOATWARE from Application Manager you will see some battery improvement.
Re: Trick to use P765V10G Indian ICS Baseband on P760V20B EUROPEAN JB flashed on P765
Im in indonesia and flash europe jb with europe basebamd, no issue with the network and voice call.
Sent from my LG-P760 using xda premium
hendrawiadnyana said:
Im in indonesia and flash europe jb with europe basebamd, no issue with the network and voice call.
Sent from my LG-P760 using xda premium
Click to expand...
Click to collapse
You have P760 and european baseband must be matching perfect for you. So this is not required at all for you.
This workaround is recommended only if there is low performance in network radio of device, especially for P765 in other countries.
Re: Trick to use P765V10G Indian ICS Baseband on P760V20B EUROPEAN JB flashed on P765
cmahendra said:
You have P760 and european baseband must be matching perfect for you. So this is not required at all for you.
This workaround is recommended only if there is low performance in network radio of device, especially for P765 in other countries.
Click to expand...
Click to collapse
Mine is p765
Sent from my LG-P760 using xda premium
Will this trick work on normal P760 L9? Because i would like to switch to ICS baseband, because of weird wifi issues on V20B.
Re: Trick to use P765V10G Indian ICS Baseband on P760V20B EUROPEAN JB flashed on P765
needmoney said:
Will this trick work on normal P760 L9? Because i would like to switch to ICS baseband, because of weird wifi issues on V20B.
Click to expand...
Click to collapse
Should work. This is why I suggested to change back to baseband from your own region. You are nothing to loose here. Either it will work or won't.
Sent from P765 on JB.
Did exactly what you did but didn't work
cmahendra said:
I have P765 Asian/Indian Edition of L9.
Checkout below how did I got Original Indian Baseband made for ICS working perfectly along with on European JELLYBEAN.
SITUATION:
I was on JellyBean P760V20B flashed on my P765 Indian L9 device. But as you all know, KDZ includes the BASEBAND too, that means when I flashed P760JB, the European Baseband was also flashed on my Indian Phone. This means I was using European Baseband on my Indian phone in Indian Region. Though, phone was working fine and network was ok but not as better as my previous V10G Indian KDZ ICS Rom. Randomly but rarely, I got my own annoying echo sound, while on voice calls. Call drops in elevators and deep section of my office.
WHAT I DID TO IMPROVE MY NETWORK?
1) Then someday (yesterday lolz) I got an idea. I took CWM BACKUP of my JB with app and data, on external sdcard.
2) Flashed back ICS P765V10G India KDZ, so I was back on my original Indian ROM with Indian Baseband and signal is again great in ICS. While flashing, i rooted it with Lelus method. But this is ICS and how can I stay without JB?
3) Then I started phone in CWM (non-touch) mode, wiped everything and RESTORED BACK CWM BACKUP OF JB, which was taken in first step.
FYI, CWM backup does not contain Baseband, hence can not flash BASEBAND. So this means only ROM is restored, and Indian Baseband from V10G remained in phone at its own reserved place.
4) Replaced "rild" file from P765 in "/system/bin/" folder. ATTACHED BELOW IN ZIPPED FORMAT. First take backup of current "rild" before replacing.
/system/bin/rild
RIL (Radio Interface Layer) file and BASEBAND should always match for 100% network performance on any Android devices. GETRIL application is made exactly for this purpose only. Since long time, I am trying hard to get GETRIL app support for our L9 devices also, by initiating direct interaction with developer.
I am again back on perfect Signal, Network, Calls, No echo. The difference is clearly visible in network and calls now no drops in elevators too like it was before.
EVERYTHING ABOVE IS TRICKY BUT VERY EASY TO PERFORM
Now in V20B JB, I see false entry in phone information that my phone is P760 and V20B Baseband, but when I tested it with GETRIL I found that I am on P765V10G Baseband. When I send email to GETRIL developers, it sends email with BASEBAND information as P765V10G. :good:
Hope this helps some of my P765 fellow I must be insane doing all this stuff. lolz :laugh:
Click to expand...
Click to collapse
I followed all the steps but when i replaced the rild file and did a reboot, the mobile showed no service !!!!!
got scared but to solve that i did a restore with CWM again and everything is now back to normal
rr46000 said:
I followed all the steps but when i replaced the rild file and did a reboot, the mobile showed no service !!!!!
got scared but to solve that i did a restore with CWM again and everything is now back to normal
Click to expand...
Click to collapse
Though network was lost, you should have powered off or rebooted 2 times and check again. sometimes network takes time for first time. But its possible that the attached RILD file is not matching with baseband you flashed.
CWM Restore was not necessary. You could only replace RILD file with your backup rild file.
Baseband and Rild results will be different in various countries and related to mobile carriers and their network profile.
Still this procedure is very safe and nothing serious issue is expected.
PS: Your id and profile does not state which country you are from? Please update at least your location in profile. What could be the reason you dont share it? Generally girls dont share it on net, lolz :laugh:
Re:Replacing rild file
cmahendra said:
Though network was lost, you should have powered off or rebooted 2 times and check again. sometimes network takes time for first time. But its possible that the attached RILD file is not matching with baseband you flashed.
CWM Restore was not necessary. You could only replace RILD file with your backup rild file.
Baseband and Rild results will be different in various countries and related to mobile carriers and their network profile.
Still this procedure is very safe and nothing serious issue is expected.
PS: Your id and profile does not state which country you are from? Please update at least your location in profile. What could be the reason you dont share it? Generally girls dont share it on net, lolz :laugh:
Click to expand...
Click to collapse
Sorry i didnt share information cuz i'm new to xda
I'm in India,Delhi NCR
BTW i did do a backup and tried to restore but that didn't work for me
I will try the procedure again and will inform you
Thanks!
:laugh:
rr46000 said:
Sorry i didnt share information cuz i'm new to xda
I'm in India,Delhi NCR
BTW i did do a backup and tried to restore but that didn't work for me
I will try the procedure again and will inform you
Thanks!
:laugh:
Click to expand...
Click to collapse
Add your cityname and network provider in profile, you can see my city and vodafone my network provider. This helps a lot many people who want to help you. Or just want to know you.
Jelly bean
Sir,
Any idea when jelly bean will be available for p765.. already rooted ICS but i'm not liking the touch after rooting..
don't want to mess around with the phone too much coz it's my primary communication device..
abhay1031 said:
Sir,
Any idea when jelly bean will be available for p765.. already rooted ICS but i'm not liking the touch after rooting..
don't want to mess around with the phone too much coz it's my primary communication device..
Click to expand...
Click to collapse
yesterday V20B released for P765 for CIS countries. I am flashing now. you can also try on your own risk.
*Find list of CIS countries in google.
@cmahendra
A little bit of help needed. I downloaded the European Open version of Jellybean and Flashed it well with no problems but i am not able to unlock the bootloader. Everytime i try the phone gets rebooted nothing else.
I would like to know that which countries jellybean you tried before unlocking the bootloader. Please be specific in the country name for V20B.
I would appreciate your help.
akhilkapila said:
@cmahendra
A little bit of help needed. I downloaded the European Open version of Jellybean and Flashed it well with no problems but i am not able to unlock the bootloader. Everytime i try the phone gets rebooted nothing else.
I would like to know that which countries jellybean you tried before unlocking the bootloader. Please be specific in the country name for V20B.
I would appreciate your help.
Click to expand...
Click to collapse
europe open, but should work with any countries.
cmahendra said:
europe open, but should work with any countries.
Click to expand...
Click to collapse
I had the same version flashed but having the issues in unlocking the bootloader. It always reboots and nothing happens. Can you suggest any help for that.
akhilkapila said:
I had the same version flashed but having the issues in unlocking the bootloader. It always reboots and nothing happens. Can you suggest any help for that.
Click to expand...
Click to collapse
If you ask this query in unlock bootloader thread you will get more hits, i mean replies. this is sort of off-topic here.
Chinese language in P760V20B?
Chinese language in P760V20B?
Hi Guys,
I have been experiencing signal problems with my G2 Mini.
Details:
Model no:LG-D620K
Software Version: V10-515-03
This problem started when there was an update to the OS and I installed it via OTA.
I have been experiencing frequent disconnection of signal and returns after about 2-4 seconds. I have notice more frequent disconnections while browsing the internet via mobile data. I tried to factory reset and even replace new sim but the problem is still there.
Any of you experienced the same? Any help would be appreciated.
Thanks
Reflash your firmware via KDZ.
Hope it helps
Sent from my D620R [Stock 4.4.2]
Vagelis1608 said:
Reflash your firmware via KDZ.
Hope it helps
Sent from my D620R [Stock 4.4.2]
Click to expand...
Click to collapse
Hi, I have model number LG-D620k, can I flash KDZ of LG-D620r or other letters with LG-D620?
Thanks!
archer.mekhael said:
Hi, I have model number LG-D620k, can I flash KDZ of LG-D620r or other letters with LG-D620?
Thanks!
Click to expand...
Click to collapse
Flash only KDZ of D620k, otherwise you may brick your device
Okay just to update you guys, i reformatted my phone and restred facotry settings but the problem was still there. I tried to research more and read somewhere in tje LG G2 thread about a firmware bug which produces the same result as what im experiencing (frequent disconnection while browsing on mobile data) the solution there was to switch mobile bands from GSM/WCDMA/LTE auto to GSM/WCDMA auto only. I tried their solution and it works like a charm. Never experienced disconnection again, only downside is I dont have 4G which is not that of a bad thing since LTE connection here in our country is pretty limited bit still I will be waiting for this to be fixed. Just sharing so that anyone who experiences this can also try if this fix if it worka for you at all. Thanks.
For all users who have lost their Baseband and Flashing stock KDZ, Tot, 9006 or 9008 isn't helping in restoring it back. Here is the solution..
"1st, Go to Your 3845#*801#
(Change according to your model)
Then Settings and then Version Info..
SW Version Info
D80120a
Sub SW Version
00
AP App Version
D80120a.13913134342
Firmware Version
4.4.2
Baseband Version
Should be Implemented
Kernal Version
3.4.0-perf-g1d2fe9a
[email protected] )
#1 SMP PREEMPT Mon Feb 3 17:25:05 KST
2014
HW Version
Rev1.0
Factory Version
LGD801AT-00-V20a-TMO-US-FEB-03-2014
Speed Bin
2.3Ghz
PVS Bin
2
If you have "Baseband Should be implemented"
Download All Flashable modems.
Root your phone, Install Custom Recovery.
Flash All modems one by one.
After each Flash clear cache, Dalvik, Factory reset and check your Baseband and IMEI.
When it returns, take an EFS backup and then you can proceed further with flashing..
I have rectified mine and 4 other users issue with this method.
Note: This is my own findings. Don't include it in any thread without my permission..
Donate me. If I saved your mobile..
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
D801 accepts only the D802 system
Hi Murshad007, I bought G2 D802 in aliexpress and came D801 with the D802 system. When I try to install the ROM D801 model of error of 2%. My phone is a D801 and only accepts the ROM D802. I managed to fix the touch and the network. Thanks for reading my post, sorry for bad English.
I'm currently using the rom 30A of Portugal, and the archives aboot.img boot.img recovery.img sbl1.img dbi.img modem.img laf.img persist.img rpm.img tz.img of the D801 model to work the touchscreen and the network.
Your phone came with system D802 right? I would like to know how you did to install the ROM D801 on your phone!
lionsdr said:
Hi Murshad007, I bought G2 D802 in aliexpress and came D801 with the D802 system. When I try to install the ROM D801 model of error of 2%. My phone is a D801 and only accepts the ROM D802. I managed to fix the touch and the network. Thanks for reading my post, sorry for bad English.
I'm currently using the rom 30A of Portugal, and the archives aboot.img boot.img recovery.img sbl1.img dbi.img modem.img laf.img persist.img rpm.img tz.img of the D801 model to work the touchscreen and the network.
Your phone came with system D802 right? I would like to know how you did to install the ROM D801 on your phone!
Click to expand...
Click to collapse
Take a backup of EFS and Nandroid in your phone and in your PC Too..
Then you have to confirm your phone model no.. How did u knew that your phone is D801 Actually.?
Flash stock KDZ of Your phone model.. Don't forget to hex editing the copy of it. And make D801 to D802. So it can be flashed on your current D802 rom
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
I'm sure it's D801 because it says on the motherboard. I have the backup of the IMEI. I must edit the KDZ with the hex editor? You also had a D802 installed on your D801?
lionsdr said:
I'm sure it's D801 because it says on the motherboard. I have the backup of the IMEI. I must edit the KDZ with the hex editor? You also had a D802 installed on your D801?
Click to expand...
Click to collapse
I have a D801, Which some one sold to me as D802. Don't knew how they do it exactly..
Editing KDZ is easier. As you don't have to search for Custom DLL. It's already included in KDZ..
Backup of IMEI means Backup of EFS. Right?
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Murshad007 said:
I have a D801, Which some one sold to me as D802. Don't knew how they do it exactly..
Editing KDZ is easier. As you don't have to search for Customers DLL. It's already included in KDZ..
Backup of IMEI means Backup of EFS. Right?
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Thankyou Murshad007!!
Finally my D801 IS WITH D801 system ). I did not know gave to edit the KDZ, weighed it was only with.TOT. Have a great day.
One note, now whenever I want to install a KDZ D801 I'll have to edit the hex editor always, this really is strange . Never buy mobile Aliexpress hehehehe
Lollipop 30b installed on my phone.
lionsdr said:
Thankyou Murshad007!!
Finally my D801 IS WITH D801 system ). I did not know gave to edit the KDZ, weighed it was only with.TOT. Have a great day.
One note, now whenever I want to install a KDZ D801 I'll have to edit the hex editor always, this really is strange . Never buy mobile Aliexpress hehehehe
Lollipop 30b installed on my phone.
Click to expand...
Click to collapse
Press the thanx button. (Donate me if you can)
No need to hex editing again. It will only be needed when you are flashing a different model no rom previously installed
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Still trying that method, but the majority of the modems bootloop my phone which is annoying so I cant pinpoint it.
I'm thinking of maybe trying the flashing of a D802 ROM onto the phone then a D801 baseband after to see if that does anything.
Meppolan said:
Still trying that method, but the majority of the modems bootloop my phone which is annoying so I cant pinpoint it.
I'm thinking of maybe trying the flashing of a D802 ROM onto the phone then a D801 baseband after to see if that does anything.
Click to expand...
Click to collapse
You must be on stock rom.. According to your motherboard..
Then start flashing Modems..
Like D801 10C, 10 D, 20A, 20G..
Then D802 Different models..
Clear cache, David and Factory after each modem flash..
If phone in bootlop or IMEI still unknown.
Flash another one
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Murshad007 said:
You must be on stock rom.. According to your motherboard..
Then start flashing Modems..
Like D801 10C, 10 D, 20A, 20G..
Then D802 Different models..
Clear cache, David and Factory after each modem flash..
If phone in bootlop or IMEI still unknown.
Flash another one
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
I have stock ROM, rooted and TWRP installed, flashed modems for different models, and only D801 10c (from here). I can't find any other modem variants for D801. All other modems cause boot loop apart from D803, but that's still showing no baseband and IMEI
Which rom you have installed?
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Murshad007 said:
Which rom you have installed?
What's status of Baseband in hidden settings...
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Hi - do you have any reliable links for all modem files? for D801
thank you so much
inshadesofgrey said:
Hi - do you have any reliable links for all modem files? for D801
thank you so much
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2451426
Here you find some...
Do as I told you the procedure in PM.
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Wifi /bluetooth /fm radio not working --
I had posted a msg earlier in this thread but it seems no one cud find a solution .so posting the question again. ..
After I ve flashed a wrong version stock lollipop (v30d Vodafone version 5.0.2) on my lg g2 D802 16gb (indian version ) , my wifi ,bluetooth and fm radio started malfunctioning ...
Following which I tried to downgrade the version back to stock 4.4.2 and subsequently to 4.2.2 , still no use in fixing the wifi bluetooth issue. ...
I tried troubleshooting in several threads in xda and other websites and blogs but cudnt Get a solution..
Later on , as per the instructions from a reputed and very much helping xda member Somboons, I tried flashing using tot method and then CSE method then again flashed the Indian version of 5.0.2 lollipop v30b.
Still no use..The wifi and bluetooth and fm radio doesn't work.
When we turn the wifi on, it shows as "turning on " , but it won't turn on.
Similar situation with the bluetooth too.
Wen I installed an app called
z device info , it shows bluetooth and wifi as present (tick sign ) but the FM radio sign is shown as hardware not found .
Even the bluetooth mac address can be seen in the app.
But in the phone device info, in hardware details , wifi and bluetooth mac address is shown as unavailable.
SOME EXPERT MEMBERS PLS HELP out .....
Pls help me fix this issue somehow..
NB: once , wen I factory resetted in safe mode , the wifi n bluetooth turned on and worked for sometime, but there aftr it didn't work nomattrr Wat I did .
Pls help
Sent from my SM-E500H using XDA Premium 4 mobile app
murshad007 help me,i have a f340l im lose the baseband after update firmware (4.2.2->4.4.2), i need help please
Lmedinab said:
murshad007 help me,i have a f340l im lose the baseband after update firmware (4.2.2->4.4.2), i need help please
Click to expand...
Click to collapse
Did you checked from the hidden command? 3845
Change language to English so I can understand.
Flash all modems of F340L K and S.. Some modem will might work
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Can you tell me where i can find thats modems? Im search and i cant find them, or i dont know how search... and them how install?
This thread wins so hard it should be a sticky
Thanks op
Lmedinab said:
Can you tell me where i can find thats modems? Im search and i cant find them, or i dont know how search... and them how install?
Click to expand...
Click to collapse
Find Flashable F340L F340K F340S modems. From different Stock roms.
Root your phone. Install custom recovery and Flash modems through recovery..
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
1. Get root and TWRP (LGOneClickRootRecovery) ---> https://www.dropbox.com/s/2shvozzbu29xjfu/LGG2-D802-OneClickRootRecoveryV1.1.zip?dl=0
2. Go to TWRP and update TWRP by flashing zip file ---> http://www.gregtwallace.com/lgg2-projects/twrp/?version=3.1.0-1
3. Go to TWRP and wipe everything except internal storage
4. Flash LineageOS 14.1 & Gapps ----> https://download.lineageos.org/d802 & http://opengapps.org/
5. Reboot system
Edit: i tested it only on my lg d802 so u have to look for files for your device
Edit: backup your data before
Thanks, I bought a used G2 today and these links were very useful to me.
Does my LG G2 have to be updated to lollipop? (It's jelly bean currently)
Bluellama said:
Does my LG G2 have to be updated to lollipop? (It's jelly bean currently)
Click to expand...
Click to collapse
if you in stock yes you must get OTA lp
but be sure you have stock recovery
dodora3d said:
if you in stock yes you must get OTA lp
but be sure you have stock recovery
Click to expand...
Click to collapse
stock recovery? my phone is rooted and i intend to update it trough lg pc suite programme on pc becasue the update doesnt show up in the update center on the phone
Bluellama said:
stock recovery? my phone is rooted and i intend to update it trough lg pc suite programme on pc becasue the update doesnt show up in the update center on the phone
Click to expand...
Click to collapse
stock recovery mean doesn't flash Twrp or CWM anyway you can download KDZ (rom LP ) and flash it by LG up or LG flash tool
Thanks, this is really great and i'll use soon... The only thing i think that isn't there its and advice from backup of EFS partition at least the first time (for noobs)
Please do not use this if you have an ATT variant... This guy doesn't mention this is for T-Mobile only.
Thanks mate, it worked perfectly. +1000000
checo3x said:
Thanks mate, it worked perfectly. +1000000
Click to expand...
Click to collapse
no problem
Hello, i am Hakim from France. I just got a used LG G2 but when i checked the version saw that it is a LG G2 D806 with 32 Go Rom. Is there a lineageos for it or it will be ok if i flash the one for the LG G2 (D802) ? Thanks. Cheers
Easy, but...
Hakkeem said:
Hello, i am Hakim from France. I just got a used LG G2 but when i checked the version saw that it is a LG G2 D806 with 32 Go Rom. Is there a lineageos for it or it will be ok if i flash the one for the LG G2 (D802) ? Thanks. Cheers
Click to expand...
Click to collapse
Hello ! You have to flash D802 version and D806 modem because if you dont do that you will have loss of total signal when its 4G and you have to reboot (my experience)... And LineageOS have random reboots with F2FS... Thats all i think :laugh:
Well, for some unknown reason OneClickRecovery didn't do it's job properly and when I rebooted to go into recovery it actually did a factory reset and I lost all my valuable data. Worked second time but I'm so fcked now.
Can you tell me how to instal those file? Im on stock LP and noob
alvinprimo said:
Can you tell me how to instal those file? Im on stock LP and noob
Click to expand...
Click to collapse
do you still need help?
Does your bootloader status matter when doing this or is it somehow solved by the tool? Also, can you flash Resurrection Remix (Nougat) using the same method?
Hi !
I'm from france, and I've just received an old LG G2 D802 on Android 5.0.2.
The previous owner of the phone told me that it was rooted, but the application "root checker" says the contrary.
In order to be sure, do I need to do a reset, or can I just simply start this procedure ?
Also, does the TWRP update is mandatory, because the last version of TWRP recovery on their website is 2.8.7.0, it is not sufficient ?
Thanks !
helpful videos
this videos on yt should help you:
root and twrp: https://www.youtube.com/watch?v=BoPjGM0nrak
install lineage os 14.1 : https://www.youtube.com/watch?v=P7KVlKgmq5g
Flyred said:
Hi !
I'm from france, and I've just received an old LG G2 D802 on Android 5.0.2.
The previous owner of the phone told me that it was rooted, but the application "root checker" says the contrary.
In order to be sure, do I need to do a reset, or can I just simply start this procedure ?
Also, does the TWRP update is mandatory, because the last version of TWRP recovery on their website is 2.8.7.0, it is not sufficient ?
Thanks !
Click to expand...
Click to collapse
salut
i tried with twrp 2.8 but i didnt work so i installed twrp 3 and then it worked
mr_mintyfresh said:
Does your bootloader status matter when doing this or is it somehow solved by the tool? Also, can you flash Resurrection Remix (Nougat) using the same method?
Click to expand...
Click to collapse
as i have flashed LOS i didnt care about bootloader but it worked. RR should also work but i didnt try it