Related
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
kyborg said:
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
Click to expand...
Click to collapse
Try taking the battery off for 24 hours.
then try to light it up...
Nadavi.
1:00AM will wait for 24 hours
kyborg said:
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
Click to expand...
Click to collapse
Mine got stuck at the phone part because I didn't have the 64bit modem drivers for XP at hand .. (only 32bit..) .. yet the phone did turn on, only the phone part wasn't updated. No idea what happened in your case
inertiax3 said:
Mine got stuck at the phone part because I didn't have the 64bit modem drivers for XP at hand .. (only 32bit..) .. yet the phone did turn on, only the phone part wasn't updated. No idea what happened in your case
Click to expand...
Click to collapse
Could you please upload or link me to all the correct modem drivers needed to flash the phone part?
Thanks,
Eran.
search the forum, it 's there
any other tips?
waited for 24 hours :| sill doesn' work
i have same trouble...when i upgrade the phone dead because batrey low..now the phone dead. please same body help....
i got same problem too.
my phone dead because i was upgrade rom with low battery.
please help us. thankyou
amisui said:
i got same problem too.
my phone dead because i was upgrade rom with low battery.
please help us. thankyou
Click to expand...
Click to collapse
This happened to me several times...
Please do the following with a fully charged battery and not USB or charger connected :
toutch the battery contacts fast several times (it creates a small sparkle that you may not see) then press the start button. That should do the trick
come on , can same body help us. !!!!!!! any sofware can flash i780 with dead position? i think the phone dead because not boot+rom+phone instaled. mirage updater only can flash in on condition.
nCoder said:
This happened to me several times...
Please do the following with a fully charged battery and not USB or charger connected :
toutch the battery contacts fast several times (it creates a small sparkle that you may not see) then press the start button. That should do the trick
Click to expand...
Click to collapse
Thank nCoder for your trick, i'll try to night
http://www.youtube.com/watch?v=XJ6l_sSHfec
http://www.youtube.com/watch?v=Fz2II5euldc
I follow you trick lick battery then press start (only start button / shift+enter and start)
but it not happend when i press start button.
what i was wrong?
best regard,
To Upgrade samsung i780
Hi i want samsung i780 firmware OS and it's procedure.
Hello there,
I am having a problem with my Xperia X10a.
Was using ferraKernal v25 with ferrarom. Everything was working fine until yesterday.
PROBLEM: When i try to power my phone on, it vibrates for a short time with a single blink of green but the phone wont turn on.
SOLUTION TRIED:
1. Battery ok.
2. Flashtool 0.2.9 gb ready (flashing aborted)
3. Flashtool 0.9.18 (gets stuck at Processing of loader_unlocked.sin finished.)
4. pc companion (This device has no updates)
Below is the screenshot from flashtool.
Is there anyway to solve this problem. ?
Thank you.
Come on guys 23 views without reply..
Seriously no one of the respected xda have the ans !!!!!
really ????
born_high said:
Come on guys 23 views without reply..
Seriously no one of the respected xda have the ans !!!!!
really ????
Click to expand...
Click to collapse
Have you tried, or are you able to get into recovery? If so , maybe you can do a backup ( if there's anything to backup ) and then reflash the rom. Or if you already have a backup, do a restore.
ph0n3n3rd said:
Have you tried, or are you able to get into recovery? If so , maybe you can do a backup ( if there's anything to backup ) and then reflash the rom. Or if you already have a backup, do a restore.
Click to expand...
Click to collapse
i am unable to turn the phone on completely, how can i get into recovery then..Its a green led vibration and full black screen..
tried flashing stock and custom rom also..ended in those two results with flashtool, mentioned above
Anything else ???
and thank you for replying..at least someone did reply
born_high said:
i am unable to turn the phone on completely, how can i get into recovery then..Its a green led vibration and full black screen..
tried flashing stock and custom rom also..ended in those two results with flashtool, mentioned above
Anything else ???
and thank you for replying..at least someone did reply
Click to expand...
Click to collapse
To get into recovery you need to press the power button , then continually press the back button, ( don't hold it but keep pressing on off on off for about 30 seconds ). Only with the phone and battery, no USB cable! If you don't have any success with recovery you may need to flash a stock firmware.
Did you root the phone or purchase it already rooted? Do you know what firmware was on the phone before it was rooted?
This might help [REF][INDEX][Guide][How/Where-To] ALL-IN-ONE Consolidated X10 INFO | ROMs/THEMEs List 1 2 3
ph0n3n3rd said:
To get into recovery you need to press the power button , then continually press the back button, ( don't hold it but keep pressing on off on off for about 30 seconds ). Only with the phone and battery, no USB cable! If you don't have any success with recovery you may need to flash a stock firmware.
Did you root the phone or purchase it already rooted? Do you know what firmware was on the phone before it was rooted?
This might help [REF][INDEX][Guide][How/Where-To] ALL-IN-ONE Consolidated X10 INFO | ROMs/THEMEs List 1 2 3
Click to expand...
Click to collapse
Well..as i opened the thread with some statements above mate..
I was already using a Feravolt rom and kernel..And i rooted it and then flashed.
And obviously i know what/how to get into recovery.
But the thing is its not working without any good reason...
Situation like this happened to me before..
i was able to sues it then with stock..
But nothing seems to work now.
I guess i am not worth the seniors attention in here.
I shouldnt have opened the thread at the first place
but Hey, thanks for at least trying to help
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
ph0n3n3rd said:
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
Click to expand...
Click to collapse
Hahaha are you for serious XD. !!!
I recall someone(senior member) from xda once posted somewhere that, one thing putting the phone into freezer can do is just damage your phone
still i will give it a shot..its dead anyway..
will let you know
ph0n3n3rd said:
Can you do a small test for me? I would like you to put the entire phone into a freezer ( not fridge ) for ten minutes, then take it out and see if it will power up. Will not harm the phone, I do it with an HD2.
Click to expand...
Click to collapse
okay i did what you said without a solve to the problem..thought to let you know
Cheers to another dead Xperia x10.
As the developers are ignorant of the problem.
use this!
it will work.
http://forum.xda-developers.com/showthread.php?t=1504809
i have registered just for you
omi17 said:
See here>>>http://pune.quikr.com/Hard-Brick-Phone-Repair-Through-Riff-Z3X-Box-Aka-Jtag-Services-In-India-W0QQAdIdZ200482728
Click to expand...
Click to collapse
are you freaking trolling me
get lost with ads :/
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
You don't need to discharge it..
1) take out the battery
2) plug the phone in a PC via micro USB
3) while holding volume up, put in the battery
4) screen whill pop up asking you to hold volume up, relise it and press it agen till you get in download mode.
panagiotisden2 said:
Hi guys i accidently bricked my lg g2 (d620r) trying to unlock my bootloader (i was in official 5.0.2 and i tryed aboot4.img for kitkat) and after a lot of days i finally found out how to unbrick it...
So first you have to make sure the phone's battery is at 0% (you can test this by connecting your phone to your pc with the battery in if it power up without pressing any button then its at 0% if its not then it will do absolutely nothing)
so your phone WILL power up but it will imediately power off again because the battery is at 0% so unplug it and wait till a 0% battery icon appear i the screen
when you see the icon press and hold the volume up button and plug the phone to your pc
now you are in download mode and you can flash a .kdz file (lollipop or kitkat)
ps: this method worked for me and i have my phone back, i dont know if it work for you too
ps:if you dont know how to get your battery to 0% just leave it in the phone and it will drain itself(i think)that worked for me
ps2:my english is not good enough so forgive me if i made some mistakes and correct me
Thank you and i hope you can get your phone back too
Click to expand...
Click to collapse
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
ByN3r0 said:
i have the same problem, but i cannot resolve with this method...
someone tried USB JIG method? it worked? please let me know
Click to expand...
Click to collapse
Are you sure that your battery is FULLY uncharged?
panagiotisden2 said:
Are you sure that your battery is FULLY uncharged?
Click to expand...
Click to collapse
my download mode isn't working in any way, i think i should sent it for repair
Thanks !
Thank you !
shalev1418 said:
Thank you !
Click to expand...
Click to collapse
you're wellcome
Did you unbriced your phone easy?
panagiotisden2 said:
you're wellcome
Did you unbriced your phone easy?
Click to expand...
Click to collapse
YUP!
shalev1418 said:
YUP!
Click to expand...
Click to collapse
Ok thank you. Im glad my method works
bartvp said:
my download mode isn't working in any way, i think i should sent it for repair
Click to expand...
Click to collapse
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
deviato said:
Thank you!
I hard bricked my D620R for the same reason, and was about to send to repair.
Then I tried this way, I waited a day with the battery pulled on, and it got discharged. Finally I was able to get into download mode!
Click to expand...
Click to collapse
Ιm glad i helped enjoy your phone
bartvp said:
You should send it i've done it too. I think your phone is back within 3 weeks
I'm also waiting until my 3 weeks are finished
Click to expand...
Click to collapse
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
panagiotisden2 said:
So can you tell us what the cost is for repair? and if LG said anything about trying to unlock your bootloder/ root it/flashing other roms etc.?
Click to expand...
Click to collapse
I don't know. I read somewhere that it costs around $30-50. But maybe my warranty isn't void, because they can't check (maybe) my phone is rooted, so it costs nothing.
The only thing I can do is waiting and waiting...
---------- Post added at 07:04 AM ---------- Previous post was at 06:53 AM ----------
marcio1477 said:
Hello, I am also having the same problem and could not solve = [
many already succeeded with the G2 and the same software used for the g2 min, but lack the file.
http://forum.xda-developers.com/lg-g2/general/file-unbrick-qualcomm-9006-qhsusb-t3056800
could anyone help?
Click to expand...
Click to collapse
I will never do this . You only brick it harder i think
HI!
I have D620r. I tryed fw update with LG MobileSupportTool. It stuck at 2, or 3%, never goes up!!
Now, when I try power up, it show only: fastboot operation. I don't have download mode.
I left battery 0%, but this metod don't work too...
It is possible flash stock fw in fastboot mode, or it is bricked?
REQUEST: Can someone who have a bricked device record a video unbricking it with me method, so more users can easily unbrick their devices too just by watching the video tutorial?
Thanks
I tried
I tried to follow your steps but i can go download mode the smartphone start to charge :crying:
help pls
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
chacks1 said:
anyone knows how to install a ROM with the phone on scares me turn it off because it was lucky to keep on achieving at the moment is in safe mode
Click to expand...
Click to collapse
It's not possible. If you try, ROM's filesystem will replace the files you are using, making the device unusable (soft-bricked).
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??
Hello, everyone!
As you might guess I don't know if my device is hard bricked.
It began when I rooted my Moto E, installed a ROM and then the battery started to discharge way too fast than normal.
I tried to calibrate the battery but it didn't work, at some point the battery only lasted a couple of hours until one day my device turned off and it didn't turn on again.
When I plug the original charger or any other, only the white led blinks, I have already changed the battery for a new one, but the same thing is happenning, only white led blinks.
It is possible to "suddenly" hard brick a device? Because the only thing I did was to unlock the bootloader and install a ROM (Cardinal AOSP 1st and then cm-13.0-20161108-NIGHTLY-condor)
(Sorry for the mistakes, not native english)
WAIFWAIF said:
Hello, everyone!
As you might guess I don't know if my device is hard bricked.
It began when I rooted my Moto E, installed a ROM and then the battery started to discharge way too fast than normal.
I tried to calibrate the battery but it didn't work, at some point the battery only lasted a couple of hours until one day my device turned off and it didn't turn on again.
When I plug the original charger or any other, only the white led blinks, I have already changed the battery for a new one, but the same thing is happenning, only white led blinks.
It is possible to "suddenly" hard brick a device? Because the only thing I did was to unlock the bootloader and install a ROM (Cardinal AOSP 1st and then cm-13.0-20161108-NIGHTLY-condor)
(Sorry for the mistakes, not native english)
Click to expand...
Click to collapse
Press and hold power button for 30 seconds, then release power button
Then connect your mobile with pc/laptop
Let it be charged for an hour
Then reboot it into fastboot and flash stock lollipop
WAIFWAIF said:
Hello, everyone!
As you might guess I don't know if my device is hard bricked.
It began when I rooted my Moto E, installed a ROM and then the battery started to discharge way too fast than normal.
I tried to calibrate the battery but it didn't work, at some point the battery only lasted a couple of hours until one day my device turned off and it didn't turn on again.
When I plug the original charger or any other, only the white led blinks, I have already changed the battery for a new one, but the same thing is happenning, only white led blinks.
It is possible to "suddenly" hard brick a device? Because the only thing I did was to unlock the bootloader and install a ROM (Cardinal AOSP 1st and then cm-13.0-20161108-NIGHTLY-condor)
(Sorry for the mistakes, not native english)
Click to expand...
Click to collapse
don't worry i'm here to help you, once i was also a noob
firstly i need to know your knowledge level do you know how to reboot you phone into fastboot mode
have you installed any custom recovery to you device if yes it'll be so easy to resolve your problem
so give me those info :good:
mklkumar4 said:
don't worry i'm here to help you, once i was also a noob
firstly i need to know your knowledge level do you know how to reboot you phone into fastboot mode
have you installed any custom recovery to you device if yes it'll be so easy to resolve your problem
so give me those info :good:
Click to expand...
Click to collapse
Hey, thanks for your help.
I know how to enter into fastboot mode and all that stuff... but when I try to turn on my device, nothing happen, and if I connect my Moto E to the PC the device manager detects it as: qhsusb_bulk
It appears that the boatloder corrupted itself for some reason, a lot of people have the same issue.
I think it is hardbricked, but if you have some info that could help me, I'd be grateful
1st try to unlock bootloader if you are not able to do that, try to flash stock firmware this may help you
And please send screenshots of all the stuff that you can access in ur bricked device...! It will be helpful for me to understand