Related
I am on OOS 3.1.2 flashed with TWRP by Eng.stk v41 works fine , but i want revert do Cyanogenmod 13, if i flash Cyanogenmod via TWRP and do a Reboot, my device Stuck on Oneplus Logo and nothing happens.
Reboot to Recovery and flash OOS 3.1.2 again and boot into OOS works fine, but Cyanogenmod doesnt boot.
If i downgrad twrp version it doesnt boot anymore into Recovery
Some help pls
I am having exactly the same problem, and would also like to know the answer.
Also, the eng.stk TWRP is the only one I can find that works.
TECCC said:
I am on OOS 3.1.2 flashed with TWRP by Eng.stk v41 works fine , but i want revert do Cyanogenmod 13, if i flash Cyanogenmod via TWRP and do a Reboot, my device Stuck on Oneplus Logo and nothing happens.
Reboot to Recovery and flash OOS 3.1.2 again and boot into OOS works fine, but Cyanogenmod doesnt boot.
If i downgrad twrp version it doesnt boot anymore into Recovery
Some help pls
Click to expand...
Click to collapse
nickmcg said:
I am having exactly the same problem, and would also like to know the answer.
Also, the eng.stk TWRP is the only one I can find that works.
Click to expand...
Click to collapse
For future, i advise you to search before posting. I have posted this exact same reply on 3 threads. but anyway.
blu.spark TWRP v41 uses the updated Marshmallow bootloader from OOS3.1.3, Hence it works as you're on the MM bootloader too.
Lollipop Bootloader recovery won't boot on Marshmallow bootloader and Marshmallow bootloader recovery won't boot on Lollipop bootloader.
- Reboot to fast boot
- Flash Unofficial MM TWRP
- Boot into recovery
- Wipe everything except SD Card
- Flash OOS2 zip
- Boot into it
- Goto settings, unlock dev options, enable advanced reboot
- Then reboot to bootloader
- Install official TWRP, Done
Flash any ROM you want now.
Joshwin Aranha said:
For future, i advise you to search before posting. I have posted this exact same reply on 3 threads. but anyway.
blu.spark TWRP v41 uses the updated Marshmallow bootloader from OOS3.1.3, Hence it works as you're on the MM bootloader too.
Lollipop Bootloader recovery won't boot on Marshmallow bootloader and Marshmallow bootloader recovery won't boot on Lollipop bootloader.
- Reboot to fast boot
- Flash Unofficial MM TWRP
- Boot into recovery
- Wipe everything except SD Card
- Flash OOS2 zip
- Boot into it
- Goto settings, unlock dev options, enable advanced reboot
- Then reboot to bootloader
- Install official TWRP, Done
Flash any ROM you want now.
Click to expand...
Click to collapse
Many thanks, I'll give it a try
nickmcg said:
Many thanks, I'll give it a try
Click to expand...
Click to collapse
Look at cm13 thread, because now is possible to flash cm13 on new bootloader (from today's nightly I suppose)
My phone stucks on oneplus logo after flashing paranoid rom . I do everything like wiping dalvin cache, data , system . TWRP recovery i am using is 3.03 and currently running cm 13. Any solution?
Mandeep Singh 07 said:
My phone stucks on oneplus logo after flashing paranoid rom . I do everything like wiping dalvin cache, data , system . TWRP recovery i am using is 3.03 and currently running cm 13. Any solution?
Click to expand...
Click to collapse
Is ur bootloader updated to latest one ??
[email protected] said:
Is ur bootloader updated to latest one ??
Click to expand...
Click to collapse
yeah its latest one 3.0.3
Mandeep Singh 07 said:
yeah its latest one 3.0.3
Click to expand...
Click to collapse
PA I believe is on the old bootloader still. So you would have to downgrade your bootloader by flashing LL stock recovery and 2.x.x OOS firmware. Not worth the hassle if you ask me.
Mandeep Singh 07 said:
yeah its latest one 3.0.3
Click to expand...
Click to collapse
actually when i root the phone , then it goes into bootloop, i didn`t backup my data so i lost my all data ,
after that i install paranoid then it stucks on boot logo , i tried it several times but none happens,
then i use adb push command ino twrp recovery(3.0.2) to copy cyanogenmod after that i flash it , it fails ,
then i flash cwm recovery then flash is succeded and currently running cm 13 ,
when i installed root checker it said your phone is partially rooted, when i enable root option in developer option then it said root verified.
But when i tried to flash other roms using twrp (3.0.3, 3.0.2) it stucks on boot logo.
Please help me
Exodusche said:
PA I believe is on the old bootloader still. So you would have to downgrade your bootloader by flashing LL stock recovery and 2.x.x OOS firmware. Not worth the hassle if you ask me.
Click to expand...
Click to collapse
lower bootloader can`t flash it fails every time....
Mandeep Singh 07 said:
lower bootloader can`t flash it fails every time....
Click to expand...
Click to collapse
Did you also revert to the old TWRP version 3.0.2? Other then that I'm out of ideas.
Exodusche said:
Did you also revert to the old TWRP version 3.0.2? Other then that I'm out of ideas.
Click to expand...
Click to collapse
At that twrp blu spark 3.0.2 is available and of only that recovery is working lower recoviers cant flash and boot
Mandeep Singh 07 said:
At that twrp blu spark 3.0.2 is available and of only that recovery is working lower recoviers cant flash and boot
Click to expand...
Click to collapse
Right but if your downgrading your bootloader to flash PA you need to use old bootloader TWRP 3.0.2. So that being said easiest way is flash 2.2.3 with blusprk 3.0.2-2 TWRP then immediately after flash TWRP 3.0.2 image. Now re boot back into recovery and flash PA. I prefer flashing 2.2.3 with stock LL recovery less chance of issues. Then just fastboot flash old TWRP 3.0.2 and continue with PA.
Exodusche said:
Right but if your downgrading your bootloader to flash PA you need to use old bootloader TWRP 3.0.2. So that being said easiest way is flash 2.2.3 with blusprk 3.0.2-2 TWRP then immediately after flash TWRP 3.0.2 image. Now re boot back into recovery and flash PA. I prefer flashing 2.2.3 with stock LL recovery less chance of issues. Then just fastboot flash old TWRP 3.0.2 and continue with PA.
Click to expand...
Click to collapse
thanks bro this works fine
Obtained phone with buggy touchscreen. Flashed CM to see if it fixed it. Didn't. Trying to go back to full stock for return
Recovered stock device via TWRP then installed what I thought was a stock recovery.img, except it wasn't - it was a CM recovery
The CM recovery only lets me boot to recovery or the bootloader - no other options are functional
In the bootloader the FRP is locked and doesn't let me flash TWRP or stock recovery
What should I do to replace the CM recovery with TWRP or stock when the FRP is locked?
THanks
funkyhunky said:
Obtained phone with buggy touchscreen. Flashed CM to see if it fixed it. Didn't. Trying to go back to full stock for return
Recovered stock device via TWRP then installed what I thought was a stock recovery.img, except it wasn't - it was a CM recovery
The CM recovery only lets me boot to recovery or the bootloader - no other options are functional
In the bootloader the FRP is locked and doesn't let me flash TWRP or stock recovery
What should I do to replace the CM recovery with TWRP or stock when the FRP is locked?
THanks
Click to expand...
Click to collapse
Go into developer options and enable OEM unlocking
---------- Post added at 02:26 AM ---------- Previous post was at 02:17 AM ----------
funkyhunky said:
Obtained phone with buggy touchscreen. Flashed CM to see if it fixed it. Didn't. Trying to go back to full stock for return
Recovered stock device via TWRP then installed what I thought was a stock recovery.img, except it wasn't - it was a CM recovery
The CM recovery only lets me boot to recovery or the bootloader - no other options are functional
In the bootloader the FRP is locked and doesn't let me flash TWRP or stock recovery
What should I do to replace the CM recovery with TWRP or stock when the FRP is locked?
THanks
Click to expand...
Click to collapse
I have just now read your post thoroughly you said that the touchscreenis buggy,is it twrp or in the system
If it's twrp don't worry I too have the same problem in the version I tried eg. 3.0.2.0,3.0.1.0,3.0.0.0
But if it's in system try factory resetting
And change smart power saving mode to performance
But to unlock frp(i suppose you have already unlocked your bootloader) just go into developer options and enable OEM unlocking option
Ok I got the stock recovery back:
I booted into the bootloader and used the local command window to fastboot boot a twrp image from my computer
With TWRP booted (but not installed) on my phone I put in a sd card with a stock recovery image, and used the booted TWRP to install the stock recovery
Unfortunately, I have not figured out how to relock the boot loader, but hopefully they overlook/don't care about that for a return - I did not root the phone
U can relock bootloader in honor5x
I think I have a similar problem. I bought new KIW-L24, I unlocked bootloader, flashed twrp to go to RR Nougat ROM. When I started Twrp to install ROM it said "Comparing tarz 2.2 to 2.5" so I read that I had update to MM.
I went to settings>updater and started update to M331 EMUI 4.0 ROM on the twrp recovery instead of stock recovery. I have M331 ROM now but I can't fastboot the TWRP recovery anymore. It sat twrp installed successful but the EMUI Stock recovery opens up when hitting Vol. + and Power instead of Twrp.
I noticed fastboot menu shows Phone unlocked but it does not say FRP Unlocked anymore. Does that prevent me from installing custom recovery now? Please...any help is appreciated.
cyrusalmighty said:
I think I have a similar problem. I bought new KIW-L24, I unlocked bootloader, flashed twrp to go to RR Nougat ROM. When I started Twrp to install ROM it said "Comparing tarz 2.2 to 2.5" so I read that I had update to MM.
I went to settings>updater and started update to M331 EMUI 4.0 ROM on the twrp recovery instead of stock recovery. I have M331 ROM now but I can't fastboot the TWRP recovery anymore. It sat twrp installed successful but the EMUI Stock recovery opens up when hitting Vol. + and Power instead of Twrp.
I noticed fastboot menu shows Phone unlocked but it does not say FRP Unlocked anymore. Does that prevent me from installing custom recovery now? Please...any help is appreciated.
Click to expand...
Click to collapse
Just delete the google account in your phone and do a factory reset. Later reboot but skip adding gmail . This will unlock frp .
gopinaidu77 said:
Just delete the google account in your phone and do a factory reset. Later reboot but skip adding gmail . This will unlock frp .
Click to expand...
Click to collapse
Can the frp relocking stop me from flahing twrp? Or is it this stock rom I am on? Do you know if other people have problems flashing twrp on L24 B311 MM update? Could I have caused my issue when I updated to the official rom using the twrp? I didn't think the update would work without stock recovery but it did. I did factory resets but I still can't install install any custom recovery. Can I go back to earlier stock rom?
I followed your instructions and deleted Google accounts and factory restored. I go to bootloader and it says Phone Unlocked but does not say FRP unlocked anywhere. I flshed twrp anyways and although cmd window shows it flashed OK when I reboot the stock EMUI Recovery opens again.
Edit: Now I use adb and mfastboot.exe to open twrp and do a backup. I don't know if I install a different rom if I will able to finally install twrp. I wonder if this 331 stock rom is the problem or FRP is issue here. Never had this problem with my Gold Honor 5X.
cyrusalmighty said:
I followed your instructions and deleted Google accounts and factory restored. I go to bootloader and it says Phone Unlocked but does not say FRP unlocked anywhere. I flshed twrp anyways and although cmd window shows it flashed OK when I reboot the stock EMUI Recovery opens again.
Edit: Now I use adb and mfastboot.exe to open twrp and do a backup. I don't know if I install a different rom if I will able to finally install twrp. I wonder if this 331 stock rom is the problem or FRP is issue here. Never had this problem with my Gold Honor 5X.
Click to expand...
Click to collapse
Plz boot recovery first and install recovery from twrp . This may do some help
gopinaidu77 said:
Plz boot recovery first and install recovery from twrp . This may do some help
Click to expand...
Click to collapse
Ok. Ive never done this this way. When installing Twrp image it asks where to install? Select Partition to Flash image: Boot, OEMinfo, or Recovery. Do I just press Recovery only?
cyrusalmighty said:
Ok. Ive never done this this way. When installing Twrp image it asks where to install? Select Partition to Flash image: Boot, OEMinfo, or Recovery. Do I just press Recovery only?
Click to expand...
Click to collapse
Select only recovery
ok I installed image, chose recovery, and installed superSU_2.46.zip but it still only boots up EMUI Stock recovery. Unfortunately its stuck in bootloop now so now I cant even adb/fastboot into twrp anymore. Now my only option is holding vol +- and Power to install update from sd card (dload folder). I just dont kmow what FW file to use.
cyrusalmighty said:
ok I installed image, chose recovery, and installed superSU_2.46.zip but it still only boots up EMUI Stock recovery. Unfortunately its stuck in bootloop now so now I cant even adb/fastboot into twrp anymore. Now my only option is holding vol +- and Power to install update from sd card (dload folder). I just dont kmow what FW file to use.
Click to expand...
Click to collapse
Fastboot boot recovery.img dint helped?
gopinaidu77 said:
Fastboot boot recovery.img dint helped?
Click to expand...
Click to collapse
I ended up trying everything. I held volume - and Power to force Fastboot&Rescue Mode. I did fastboot boot twrp_kiwi.IMG. When in Twrp I install twrp_kiwi.IMG (For permanent Install) but EMUi recovery still stays.
I believe the custom recovery is installing but NOT where it needs to install.(Probably a different partition). I noticed a erecovery when I extracted an update file with HuaweiExtractor with does program. I DID get out of Bootloop by applying update from SD card (Force Update Volume - and Plug in USB cable). I rolled the FW back to B130 Emui 3.1 Firmware. I still need to fash Twrp and update this phone now.
cyrusalmighty said:
I ended up trying everything. I held volume - and Power to force Fastboot&Rescue Mode. I did fastboot boot twrp_kiwi.IMG. When in Twrp I install twrp_kiwi.IMG (For permanent Install) but EMUi recovery still stays.
I believe the custom recovery is installing but NOT where it needs to install.(Probably a different partition). I noticed a erecovery when I extracted an update file with HuaweiExtractor with does program. I DID get out of Bootloop by applying update from SD card (Force Update Volume - and Plug in USB cable). I rolled the FW back to B130 Emui 3.1 Firmware. I still need to fash Twrp and update this phone now.
Click to expand...
Click to collapse
So the frp lock still exists is it?
gopinaidu77 said:
So the frp lock still exists is it?
Click to expand...
Click to collapse
Yes I think the FRP Lock is on. It only says: Phone Unlocked. Before it used to say hone Unlocked and FRP unlocked.
cyrusalmighty said:
Yes I think the FRP Lock is on. It only says: Phone Unlocked. Before it used to say hone Unlocked and FRP unlocked.
Click to expand...
Click to collapse
Have u removed gmail account ?
gopinaidu77 said:
Have u removed gmail account ?
Click to expand...
Click to collapse
Yes I had removed gmail account. I went to settings>accounts and deleted Google and all other accounts. Does FRP Unlock when you unlock Bootloader?
cyrusalmighty said:
Yes I had removed gmail account. I went to settings>accounts and deleted Google and all other accounts. Does FRP Unlock when you unlock Bootloader?
Click to expand...
Click to collapse
U can try that
Hello! I am a Redmi Note 3 user, some days ago I changed from stable to beta ROM and spoiled my device. All the sensors are not working and can't apply for unlocking bootloader. Please suggest me an unofficial method to unlock bootloader and install custom recovery. Hope you guys will help me soon! Thanks
ishansarvaiya said:
Hello! I am a Redmi Note 3 user, some days ago I changed from stable to beta ROM and spoiled my device. All the sensors are not working and can't apply for unlocking bootloader. Please suggest me an unofficial method to unlock bootloader and install custom recovery. Hope you guys will help me soon! Thanks
Click to expand...
Click to collapse
Whats ur miui version ?
naik2902 said:
Whats ur miui version ?
Click to expand...
Click to collapse
on miui 9.
ishansarvaiya said:
on miui 9.
Click to expand...
Click to collapse
How u flashed miui 9 beta ? Using fastboot rom or recovery rom ?
naik2902 said:
How u flashed miui 9 beta ? Using fastboot rom or recovery rom ?
Click to expand...
Click to collapse
I did it by Recovery rom.
ishansarvaiya said:
I did it by Recovery rom.
Click to expand...
Click to collapse
Sensor not working then May be something wrong with persist partition.
Did u manually downloaded recovery rom from mi site.?
Why miui 9? Latest beta is miui 10 . go to system updater app and press update to upgrade to latest miui 10 beta version.
I think latest beta is 8.10.11 something.
naik2902 said:
Sensor not working then May be something wrong with persist partition.
Did u manually downloaded recovery rom from mi site.?
Why miui 9? Latest beta is miui 10 . go to system updater app and press update to upgrade to latest miui 10 beta version.
I think latest beta is 8.10.11 something.
Click to expand...
Click to collapse
When I installed, I got miui 10 and stuck in the problem so I tried to install stable therefore I am now again in miui 9.
ishansarvaiya said:
When I installed, I got miui 10 and stuck in the problem so I tried to install stable therefore I am now again in miui 9.
Click to expand...
Click to collapse
So u on miui 9 stable?
U stuck during upgrading miui10 coz u must factory reset. Sometime rom cant boot due to data partition and apps.
So need to clear user data to succesfully boot on upgrade. So u must factory reset to clear data partition. Else u will face problems. or bootloop while upgrade.
So if I just want to do the repair sensor stuff, what shall I do?
I did install TWRP but couldn't install any custom ROM, all stuck in bootloop!
What shall I do?
ishansarvaiya said:
So if I just want to do the repair sensor stuff, what shall I do?
I did install TWRP but couldn't install any custom ROM, all stuck in bootloop!
What shall I do?
Click to expand...
Click to collapse
Lol..u must format data in twrp.
Go to twrp and press FORMAT DATA and Type "YES" to format.
after that wipe factory reset
Flash rom
Flash gapps
Reboot
naik2902 said:
Lol..u must format data in twrp.
Go to twrp and press FORMAT DATA and Type "YES" to format.
after that wipe factory reset
Flash rom
Flash gapps
Reboot
Click to expand...
Click to collapse
I did this procedure but still stucked in bootloop. I just want to repair persust.img, I don't need to install custom ROMs now.
ishansarvaiya said:
I did this procedure but still stucked in bootloop. I just want to repair persust.img, I don't need to install custom ROMs now.
Click to expand...
Click to collapse
Flash latest fastboot rom with flash all option . Which Cleans everything including userdata.
naik2902 said:
Flash latest fastboot rom with flash all option . Which Cleans everything including userdata.
Click to expand...
Click to collapse
I tried latest fastboot ROM with flash all option as you guided, it shows an error that this file can not be flashed. After that I flashed this by EDL mode, the flashing completed successfully but the sensors are still not working!
ishansarvaiya said:
I tried latest fastboot ROM with flash all option as you guided, it shows an error that this file can not be flashed. After that I flashed this by EDL mode, the flashing completed successfully but the sensors are still not working!
Click to expand...
Click to collapse
Just extract the persist.img file from fastboot rom.
Put the device in fastboot mode or if it doesnt work then put in edl mode and flash.
And flash using fastboot command
fastboot devices
fasboot erase persist
fastboot flash persist persist.img
fastboot reboot
Or
easy method
u can just flash persist.img file using TWRP. if twrp ask which parttion to flash then select persist partition.
i have rooted my device miui 10 with TWRP recovery, my device downloaded miui 11 (belekota) and wait to install
can i install new update 11 or will stuck in problem and lost all my app's and data ??
I updated mine...all data remained .....lost root though
fmkingpin said:
I updated mine...all data remained .....lost root though
Click to expand...
Click to collapse
what about TWRP recovery, did it back again to stock recovery or with the same TWRP recovery ??
Reverted to stock recovery.
fmkingpin said:
Reverted to stock recovery.
Click to expand...
Click to collapse
ok, i will try, i hope not found problem
thanks
zeko_1992 said:
ok, i will try, i hope not found problem
thanks
Click to expand...
Click to collapse
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
fmkingpin said:
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
Click to expand...
Click to collapse
i didn't found root and twrp for the new update
i'm still using miui 10 because i need root and twrp recovery
i hope miui 11 rooted :crying:
fmkingpin said:
Only problem I found is that I can't install back a tarp recovery.....if u get through rotting after update please share...
Click to expand...
Click to collapse
did you tried root again after update ?? success or fail ??
zeko_1992 said:
did you tried root again after update ?? success or fail ??
Click to expand...
Click to collapse
Fail.
fmkingpin said:
Fail.
Click to expand...
Click to collapse
hmmm... my device updated itself without my permission :crying:
i lost my root and twrp, i'm stuck with useless stupid update
tried searching in internet about root for new update and twrp but nothing for now
i think we will wait weeks or months to see new updates for root and twrp
if i found anything new, i will post here and mention you :good:
Guys
Download Miui update in zip file and flash via recovery.
It doesn't revert to stock recovery and keeps your twrp along with root intact.
zeko_1992 said:
i didn't found root and twrp for the new update
i'm still using miui 10 because i need root and twrp recovery
i hope miui 11 rooted :crying:
Click to expand...
Click to collapse
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
swapyworld said:
Guys
Download Miui update in zip file and flash via recovery.
It doesn't revert to stock recovery and keeps your twrp along with root intact.
Click to expand...
Click to collapse
bucks_26 said:
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
Click to expand...
Click to collapse
thanks for help guys, the problem now how to downgrade ???
zeko_1992 said:
thanks for help guys, the problem now how to downgrade ???
Click to expand...
Click to collapse
Hope you have backed up system, boot and vendor partition.
Wipe system, dalvik, cache, vendor partition and restore backup.
swapyworld said:
Hope you have backed up system, boot and vendor partition.
Wipe system, dalvik, cache, vendor partition and restore backup.
Click to expand...
Click to collapse
i don't have custom recovery, my device back to stock recovery
i tried downgrade with mi flash and step by step from websites but error, tried flash from recovery but it changed, there are 3 options
- restart
- wipe data
- contact mi assistant
no option install update.zip, also from device and check software update, no option to choose install update
everything changed, stupid update, i don't feel any good change
i think developer will take long time to root new update and use custom recovery
no downgrade work, no one try
zeko_1992 said:
i don't have custom recovery, my device back to stock recovery
i tried downgrade with mi flash and step by step from websites but error, tried flash from recovery but it changed, there are 3 options
- restart
- wipe data
- contact mi assistant
no option install update.zip, also from device and check software update, no option to choose install update
everything changed, stupid update, i don't feel any good change
i think developer will take long time to root new update and use custom recovery
no downgrade work, no one try
Click to expand...
Click to collapse
Why don't you try installing recovery using fastboot method and then flash magisk 20.1 zip through recovery.
Please check if bootloader is still unlocked before trying this.
swapyworld said:
Why don't you try installing recovery using fastboot method and then flash magisk 20.1 zip through recovery.
Please check if bootloader is still unlocked before trying this.
Click to expand...
Click to collapse
i tried using fastboot (mi flash tool) but error, tried another step in same app but show error
the new update changed everything, no one can downgrade from 11 to 10, i don't know why ??
from 10 to 8 you can downgrade without any problem, 11 you can't do anything
solved
finally i made it and back again to miui 10
best program for use xiaomitool
flash anything with 2-3 steps
bucks_26 said:
I've successfully rooted my miui 10 by this method
https://forum.xda-developers.com/redmi-note-4/how-to/guide-root-using-magisk-stock-recovery-t3718203
And i've installed miui 11 now, somehow.. latest magisk (v20.1) can't root my device with the same method. So i tried to root with magisk v2.0 (same i did in miui 10) and its work
Click to expand...
Click to collapse
thanks for highlighting issues with Magisk 20.1!
I used 20.0 and everything works
Any one using using gcam on miui 11?