I tried jelly blend v1.0 on my a35 Micromax bolt, i installed base ROM finely, but when i tried to install main ROM, then system hang up, i pull off the battery and again insert it, and again tried installation. Then further system hang up, then i further pull of the battery and inserted that, now i lost my fastboot mode and cwm recovery (previously installed recovery.img using fastboot mode) . When ever i put battery in my phone, it is automatically showing BOLT logo even i am not starting it manualy by pressing power button. I tried spreadtrum tool to flash STOCK ROM of A35 Bolt, but pc is not detecting my phone??? please help me to get back to my fastboot mode and recovery mode
Hi guys, i'm a bit of a noob and new to these things.
My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode.
History:- I had rooted my Canvas HD,
installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6,
afterwards I restored my phone using ClockWorkMod recovery backup I made earlier.
Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings,
since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop
and this keeps repeating again & again.
The trouble is that the USB connector of my phone has also become faulty.
Any advise to what can I do?
OR should I take it to micromax service center???
Flash stock firmware
With this tutorial
http://forums.droidbeans.com/microm...)-(stock-recovery)-for-micromax-a116-hd/?wap2
Hope u helped u
Sent from my GT-S5282 using Tapatalk
ArshArora said:
Flash stock firmware
With this tutorial
forums.droidbeans.com/micromax-a116-canvas-hd-rom-index/(stock-rom)-(stock-recovery)-for-micromax-a116-hd/?wap2
Hope u helped u
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection.
Any other advise???
Use traditional method (SP Flash Tool)
Raveesh Delhi said:
Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection.
Any other advise???
Click to expand...
Click to collapse
Use sp flash tool... Video link for it
http://m.youtube.com/watch?v=7pCiWR_H7wc
Enjoy bro!! Hope it will help you.
Raveesh Delhi said:
Hi guys, i'm a bit of a noob and new to these things.
My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode.
History:- I had rooted my Canvas HD,
installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6,
afterwards I restored my phone using ClockWorkMod recovery backup I made earlier.
Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings,
since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop
and this keeps repeating again & again.
The trouble is that the USB connector of my phone has also become faulty.
Any advise to what can I do?
OR should I take it to micromax service center???
Click to expand...
Click to collapse
OK so as the recovery is accessible by u
Flash som other ROM 4 nw
Nd thn download a flashable zip of stock Nd thn flash it
Rooted Canvas HD stuck on logo
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Bheem_Singh said:
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Click to expand...
Click to collapse
You need to flash the files given in the thread using SP Flash Tools !!
Bheem_Singh said:
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Click to expand...
Click to collapse
Bheem I hope your problem has been solved.
As for my problem, my device is unsavable.
try wiping dalvik cache
otherwise reflash after clearing all the necessary things
Without working usb connection, you should not try flashing different roms. I lost Samsung galaxy i5000 due to same problem. I didnot have button combination option to go to recovry.
However your device can survive. 1. Turn off the phone by removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key . after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia z2(my choice only, you can try any stable rom) from your memory card.
This should work and get usb repaired aSAP.
Hey guys
I have Micromax A114. It just won't boot up. No logo nothing. When I connect it to my laptop it keeps connecting and disconnecting. Please help me guys. Can't even flash stock ROM as the phone keep disconnecting.
Can't go to fastboot or recovery. Its bricked
You can always go to the Service Center but they will not touch your mobile because your phone is rooted .. If you unroot it also it will have traces so going to service center is a bad idea
Guys Yesterday night i accidentally select the "format whole flash" option in sp flash tool
so automatically it leads to my Micromax Canvas doodle 3 a102 phone without the bootloader
Now my phone does not power on, even it is not showing the Micromax logo and battery charging icon
I cannot able to access the recovery mode in my phone
PLEASE CAN ANY ONE HELP ME?
Please please is there any option to recover my cell phone please put the solution to my mail id also mail-id: [email protected]
:crying::crying::crying::crying::crying:
Software version number : v8_0_6
android : jellybean
RAM: 512MB
ROM: 4GB
Guys Today i accidentally select the "format whole flash" option in sp flash tool
so automatically it leads to my Micromax Canvas doodle 3 a102 phone without the bootloader
Now my phone does not power on even it is not showing the Micromax logo and battery charging icon
I cannot able to access the recovery mode in my phone
What to do.................
Hi,
I try to install custom ROM. but now my device stuck in Factory Mode Bootloop.
USB Debugging disable.
TRY YGDP tool but get some error when flash
Flash boot image,twrp image ,rom img in fastboot mode.
Not able to go in recovery mode.
I have the same problem as yours. You fixed it or not?
If fixed, plese tell me how.
My Micromax A311 is showing factory mode and doesn't boot up
Hello sir pls help out with the factory mode showing will charging and when I power on my phone it show logo and suddenly get switch off automatically pls ????? help us sir.