I get 90mbps on Ookla over WiFi, but Exchange won't sync. Works fine if I switch to LTE. My old G2 continues to sync fine on WiFi since the SIM is no longer active, so I know the WiFi is not the problem.
It's an 802.11ac-only AP.
Update: I turned off mobile data and the WiFi sync started working fine. Sounds vaguely familiar. Any ideas?
Hmm. This may come down to Enhanced LTE. I turned that off and suddenly a couple of things have gotten better. Browsing is faster. Exchange can sync now. And battery usage isn't dominated by "Phone".
Of course, it could be that Enhanced LTE just doesn't work well from my particular location. Though I must admit I've seen these problems both at home and at work. Even so, both locations would be on the same local network.
Related
It appears the Evo 3D has issues staying connected to these networks, whereas the 4G on both Sense and AOSP worked fine.
Here is my network at work:
802.1x EAP
Enterprise(802.1x)
EAP method - PEAP
Phase 2 authentication - MSCHAPV2
then enter identity, skip anony identity, then enter password. Then I should be gold, but after a reboot, it can no longer stay connected.
Anyone else having this issue?
I'm having a similar issue. The wifi setup is pretty much the same as yours. Users with a Nexus S are able to roam around just fine and their wifi stays connected and automatically reconnects when the SSID is in range. I have an Evo 3D and even though it says it remembers the SSID, I have to re-enter my password whenever the device needs to re-establish connectivity (after a restart, coming into the office in the morning, etc). I am able to reauthenticate without any problems though.
Email HTC or call, notify them..its clearly a bug/glitch that's needs to be addressed
Bussin Caps from my 3D shooter
Is there a reason that an open wifi netword that has you login from a web page would run so slow. It suppose to be a 100Mb/s speed and on the computer it gets 80+/9+ but on my phone, with it saying its connected. It gets .4/.4 from the speedtest app. My home network is 20/2 and i get like 14/1+ on the phone. Sometimes I get less.
I can give it a try here and let you know what happens.
While I haven't tried the wifi yet, I did try syncing to my work exchange account, and it gave me an error saying 2 policies were not supported (installing unsigned app packages and smime soft certificates). My hero could sync with the exchange account just fine, so I'm wondering what's different. I may have to get in touch with our IT group........
This morning, my WIFI connected no problem, but I haven't rebooted it since yesterday. I seriously think it has to do with rebooting. It's a bit bizarre.
Hi
I'm not sure if it's Android or Transformer prime thing.
My google data (gmail, gcal) syncs properly and immediate when i'm @home with my wifi network, but refuses to automatically sync at the office wi-fi network.
The office network is freely available to the device, i can browse the net without any problems.
Can figure it out why the sync doesn't work.
I have noticed the same issue on mine except my home network sometimes has the issue too. I have resolve it by disabling the sync and then enabling it again. This method works for a little while then it seems to go into the no new notification mode. I have to manually refresh in gmail to get my new mail to show up. It is annoying. I even send test emails to both my phone and tablet, but it will not ccome through until it feels like it or unless I manually update. My xoom does not do that.
I have a sort of similar thing. All I know is that I'll be delivering pizzas while tethered. As soon as I get home, and turn off the tethering, my tablet connects to the home WiFi and gets one or more notification noises as it if wasn't syncing the same way when tethered. The oddity is that it doesn't know I'm on a mobile connection so it isn't trying to save bandwidth. I suspect there is something in the security or ports that makes it's connections to the home network different than when tethering, or when you are at work.
I can't speak to the issue regarding tethering, but for those of you having issues at the office, this is most likely due to firewall rules. I work for a cybersecurity software company, and have been fighting for them to address this as both my phone and prime suffer from the same thing.
If you have a good relationship with your IT/Corporate security people, try bringing it up with them.
tdrussell said:
this is most likely due to firewall rules
Click to expand...
Click to collapse
do you know if google sync services uses other than 80/443 port numbers?
Not only did I notice this same thing happening I also noticed emails I had are disappearing when not on home network and Wi-Fi tethering with my phone this is weird...... they disappear from my gmail application......
I'm having an issue that has been bothering me. I run Etrade Pro with streaming data and charts, and when I leave my home, it does not automatically cut the wifi and switch to LTE or 4g. My app stops and says there is no data. This has happened a lot and I wonder if there are some settings that need to assure that mt cell signal automatically kicks in when Wifi cuts out.
ANother problem is that if I approach an area where there is wifi, the phone connects, and i usually get a data issue again.
I also got the same problem when i stream a video while on wifi and then leave the wifi zone, so I know it is not an Etrade app specific problem,
Any advice would be appreciated. What I am having to do is manually shut off wifi and then restart the app when the 4g kicks in, and I know the phone is designed to handle this for me.
lindenhurst said:
I'm having an issue that has been bothering me. I run Etrade Pro with streaming data and charts, and when I leave my home, it does not automatically cut the wifi and switch to LTE or 4g. My app stops and says there is no data. This has happened a lot and I wonder if there are some settings that need to assure that mt cell signal automatically kicks in when Wifi cuts out.
ANother problem is that if I approach an area where there is wifi, the phone connects, and i usually get a data issue again.
I also got the same problem when i stream a video while on wifi and then leave the wifi zone, so I know it is not an Etrade app specific problem,
Any advice would be appreciated. What I am having to do is manually shut off wifi and then restart the app when the 4g kicks in, and I know the phone is designed to handle this for me.
Click to expand...
Click to collapse
I'm not sure this is something we have control over, I was reading over a white paper qualcomm wrote on the matter: http://www.qualcomm.com/media/documents/files/3g-wifi-seamless-offload.pdf
Our phone is 3GPP R8 however, I'm not sure at&t's network supports dual stack mobile IP, so therefor the handoff between wifi and 3g would have to interrupt data.
WHat bothers me is that I just came from an Iphone4 and the iPhone switched from wifi to cell, and my Etrade App kept running. There may have been a momentary lag, but i didn't have to close the app and start it again.
Let me look into it more when I get home. At work youtube is blocked on the company network so I can't test if a video continues between handover here.
WHen I leave my home and know that I am out of wifi range, I still see the wifi symbol on the home screen but it looks like there are no bars of strength. It's like the thing is still trying to draw data through wifi that is well out of range.
Frustrating.
lindenhurst said:
WHen I leave my home and know that I am out of wifi range, I still see the wifi symbol on the home screen but it looks like there are no bars of strength. It's like the thing is still trying to draw data through wifi that is well out of range.
Frustrating.
Click to expand...
Click to collapse
So if the wifi symbol is on the status bar that means the phone is still connected to the wifi (or at least thinks it is).
I was not able to reproduce your problem with youtube when I was home. I started a video on wifi in my home, and then walked out the front door and down the hall until it lost the connection, the wifi symbol disappeared and it just had to re-buffer a little bit after it switched to LTE then the video continued.
Rooted stock ROM Verizon I605 running 4.1.2.
I was in Korea for the past 6 months and just got back the other day. Before I left, I never had any problems, but since returning, my wifi and data are on at the same time, and it's causing me problems. Here's what's going on:
If I just have mobile data on, everything works as it should. If I turn on Wifi, it will connect, but the data connection will also remain, and my internet speeds will become spotty. If I turn on mobile data and just try to use wifi, the Wifi icon appears (with the orange/green arrows indicating activity), but apps don't connect. Facebook automatically tells me "No Internet connection," Opera won't load pages, Google Talk can't sign in, etc. If I turn mobile data back on, things work again, albeit slowly.
The strange thing is if I turn on Airplane Mode and then turn it off, leaving data off, my wifi will work 100% normally. If I try to turn on mobile data again, I get the same issue.
While I was away, I replaced the SIM card so I could use my phone over there. I messed with some APN stuff thinking I would be able to get data on my phone in Korea, but that didn't work out so I returned my APN settings to default. I have a feeling that's the source of my problems, but I have no idea how to fix it. I tried restoring my APN settings to default through the settings, but that didn't fix it either.
Any help at all would be appreciated!
If it helps I have been seeing the same thing. I'm on CleanRom 3.5 (Verizon Rom base) and PB&J kernel. It seems to be hunting between them even when in strong wifi signal.
Interestingly enough it's not doing it right now.
I'll keep a closer eye on it now.
Sent from my SCH-I605 using xda premium
In my case, it's a constant problem (unless I manually go into airplane mode, like explained). It doesn't work sometimes and not work other times.
I'm trying to use wifi at home, so signal strength isn't an issue either.
Ever since I received my OPX I had little problems with my data, independently of using Wi-Fi or mobile internet (2g/3g).
It started with the fact that in the installation of the phone it couldn't connect to verify it's connection, although wifi was connected correctly.
I started it without the connection it wanted and factory resetted it and then I got the same problem, but after a few minutes it worked correctly and I could install my phone without any problems.
Now when I work with my phone (Whatsapp, 9gag, webrowsing, video streaming) it sometimes stops with loading, like it has lost its connection, but both Wi-Fi and mobile internet are connected.
This is very frustrating when watching video, since it just won't buffer anymore and I have to wait for like 1 minute before it continues and reloading the page helps most of the times, because I then force to get data.
Sometimes when WhatsApp isn't loading/ keeping it's connection I just start a SpeedTest to ensure it has an open connection. This works most of the times.
Also WhatsApp Web keeps losing its connection while the screen is on.
I hope you guys have some ideas on this subject.
I have a similar issue. In my case the device seems to have problems with certain WiFi-Networks (at university to be precise). The connection with the WiFi is still there, but there's no actual connection to the internet sometimes. That's why your mobile data doesn't activate - there are no connection issues on mobile data for me.
The cause for this is probably the lack of a 5GHz WiFi antenna. I don't know why, but my OPX cannot handle the 2.4GHz WiFi at university (at home it works fine!).
So to test this out, you should try different WiFi-Networks. If the network is 2.4GHz only, it should be working.
The WiFi thing while setting up the phone is a known OxygenOS bug and can be worked around.