After factory reset I get "setup wizard has stopped" but I'm not able to flash my rom
Hi all
this is my first post so please be nice to me if I do something wrong.
Ok, where to begin with my long list of problems...
1. I have an Evercoss A28b bought in Indonesia but manufactured in China. It has Mediatek 6972 and SW version is ALPS.JB3.MP.V1.40 (that's what I could find in the phone's factory mode)
2. I rooted it 2 months ago and put all my apps and data on it from my old phone with Titanium Backup. I had some minor problems in the beginning but fixed them all and the phone was running smoothly.
3. This morning I froze "Go Launcher Z" because I didn't like it anymore and wanted to try how my phone looks withour it. Since the moment I froze the app nothing happened. I couldn't access the home screen or the app drawer but only my recently used apps when pressing and holding the home button.
4. I wanted to reboot my phone but it kept booting and booting, saying "android is upgrading" all the time. After one hour I took out the battery and now it's dead.
5. I tried to reset it into factory mode and first it seemed to work because it asked me to do all the settings like language, google account etc. As soon as I was finished a window appeared with "unfortunately setup wizard has stopped" and now I can't even see my homescreen or anything. My screen is black apart from the battery, wifi and SIM icons in the top right corner.
Now, what I tried to do:
1. I googled and found a few solutions saying I should flash my rom. I googled and found the sp flash tool and a rom for my phone.
2. SP Flash Tool did not recognize my phone and there was no scatter file in that ZIP file that I had downloaded.
3. I downloaded MTKdroidtools to try to generate a scatter file from my phone and a lot of different drivers but none of them made my phone connect with DroidTools.
4. So I went back to SP Flash Tool and googled for hours in order to find a scatter file and make my phone connect with SP Flash Tool. I managed to find another rom, this one had a scatter file in it and I also managed somehow to connect my phone with SP Flash Tools. It was only recognized after I had selected the scatter file and pressed the download button though.
5. SP Flash Tools brought an error message saying my pmt has changed and I need a new one or something like that. Unfortunately I can't even re-do this to give you the correct error message because I can not connect my phone to the PC any longer. Everytime I do this with battery or without it keeps connecting and disconnecting all the time.
6. I am at my wits ends and don't know what to do any more.
Please help
Hello, I bought this phone 3 months ago its a Lenovo VIBE X2-EU model on the latest firmware. Yesterday, I encountered an error where WiFi couldn't be enabled. Restarted phone, Factory resetted it. Still didn't work. Accidentally wiped the OS itself from its stock boot loader. Now I'm stuck, PC doesn't recognize the phone as an external device so i cannot flash a stock ROM on it. All I can do is charge the phone and enter factory reset menu/meta mode and a Chinese menu that has to do with system checks. Any ideas? Really tried to flash a ROM with drivers + SP Flash tool etc but to no avail.
Hello everyone! My Serioux Surya Reaction tablet is stuck at the moment where it shows the Serioux logo. It doesn't auto reboot, I can enter in system recovery and i tried wipe data and cache but none of them worked. The tablet worked very good untill today when I factory reset it, but before that I transferred every app to system/app because I wanted the apps to remain after the reset. After reset, I saw that when I tried to enter in Chrome, MxPlayer or Sopcast it appeared that files are corrupted, so I installed Titanium and uninstalled these 3 apps. After that I rebooted the tablet and the thing with the logo happened. I can't find the firmware for this version of Serioux to flash. Can you please tell what can I do now?
Hello and Servus,
I recently got a Homtom from my neighboor to look at because its full of bloatsoftware and seems to have battery issuses.
First I tried to install TWRP by this guide "https://romprovider.com/2018/10/homtom-zoji-z7-root/" and this one "https://www.getdroidtips.com/twrp-recovery-zoji-z7/"
I was able to "install" twrp using adb but I was stucked in a bootloop after this, couldnt even get to recovery /twrp, so I tried my way with the Smart Phone Flash Tool.
Some problems where persistent and I couldnt connect my phone with the tool until I had to format it via.
After formating the phone and installing the stock rom I got from here "https://rootmygalaxy.net/stock-rom-on-zoji-z7-official-firmware/" I am now stuck even worse. I dont even have a bootloop, the phone just starts and goes off.
Even worse was it, after I tried to flash to a "higher" version I got from this post "https://forum.xda-developers.com/general/general/zoji-z7-4g-smartphone-t3613364" - I just got a display bug and couldn't do anything, so I flashed the stock rom again.
Right now the only thing that works is fastboot. If I try to boot it in recovery or else it just goes off.
Is there someone who can help me there ?
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
snowlite said:
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
Click to expand...
Click to collapse
hey..
did u solve ur pb..? i have another phone wihch called blackview A60 pro i m getting same error.. it was working fine then suddenly dead..and no flashing or etc..