I tried rooting my phone and got it on bootloop. Then i tried to use Full_System_dupm.zip to install update and it opened. After that it wont detect wifi or sim card, and it wont reboot. I tried turning it off and now it is not turning on. Help please
edwinmok said:
I tried rooting my phone and got it on bootloop. Then i tried to use Full_System_dupm.zip to install update and it opened. After that it wont detect wifi or sim card, and it wont reboot. I tried turning it off and now it is not turning on. Help please
Click to expand...
Click to collapse
Can you reboot into bootloader and flash TWRP? If so, then you can do a full wipe and re-flash the stock OOS 2.1.3-x ZIP (which you can find in this forum). This should fix your problem.
Related
Hi, my omate truesmart was stuck in a bootloop about 6 months ago and i gave up on it. Am actually trying to restore it again now. I am able to get into stock recovery, but whenever i connect it to my computer to try to install twrp or try to flash using sp tools, it gets into that bootloop mode again and keeps rebooting to the omate splash screen every 30 seconds or so (thus connecting and disconnecting the device from the computer). I did a factory wipe and all that through the stock recovery. I did not take any backups. Anyone has any pointers on how to resolve this?
boysha8 said:
Hi, my omate truesmart was stuck in a bootloop about 6 months ago and i gave up on it. Am actually trying to restore it again now. I am able to get into stock recovery, but whenever i connect it to my computer to try to install twrp or try to flash using sp tools, it gets into that bootloop mode again and keeps rebooting to the omate splash screen every 30 seconds or so (thus connecting and disconnecting the device from the computer). I did a factory wipe and all that through the stock recovery. I did not take any backups. Anyone has any pointers on how to resolve this?
Click to expand...
Click to collapse
Pull out the battery for turn off. Now you can flash a new rom, twrp. I had the same problems.
Hi miki1g, i did pull out the battery to turn it off. But when i put it back in and connect it to the PC, the same thing happens, it immediately switches on by itself and resumes its bootloop. Am i supposed to do something different?
boysha8 said:
Hi miki1g, i did pull out the battery to turn it off. But when i put it back in and connect it to the PC, the same thing happens, it immediately switches on by itself and resumes its bootloop. Am i supposed to do something different?
Click to expand...
Click to collapse
If you don't turn on the watch again maybe you have quick boot on , so try hold the power button pushed , or i don't remember if from stock recovery you can do turn off the quick boot
I dont see an option for turning off quick boot in the stock recovery. Is there any other solution?
boysha8 said:
I dont see an option for turning off quick boot in the stock recovery. Is there any other solution?
Click to expand...
Click to collapse
try this I think it will be works if your usb debuging is on. before you connect to Pc turn on your sp-flash tool with all files redy to flash and click download, then connect the Ts. the sp-flash tool should recognize the connection and and making your flashing rom
Hi, I was updating my phone yesterday with auto updater. Phone restarts and go into recovery mode, but now I can see "android guy" with description: ‘Preparing to system update’ but screen is turning off and on. I try to restart it hard reset and normal /remove battery, sim, sd/ still the same:/ I have cm 13, twrp 2.8.7, [bootloader][patched][5.0.2], gapps pico I have it all from this forum tutorials.
What can I do?? It was working good and I just click on automatic update(
matiz1999 said:
Hi, I was updating my phone yesterday with auto updater. Phone restarts and go into recovery mode, but now I can see "android guy" with description: ‘Preparing to system update’ but screen is turning off and on. I try to restart it hard reset and normal /remove battery, sim, sd/ still the same:/ I have cm 13, twrp 2.8.7, [bootloader][patched][5.0.2], gapps pico I have it all from this forum tutorials.
What can I do?? It was working good and I just click on automatic update(
Click to expand...
Click to collapse
the same thing happend to me.. You have to go back to stock using lg flash tool if you have used your sd card as phone storage you will lost all your data.
likeadracula said:
the same thing happend to me.. You have to go back to stock using lg flash tool if you have used your sd card as phone storage you will lost all your data.
Click to expand...
Click to collapse
it didnt see phone When power is on, I can see the connection to pc noise and in safety disconnect option there is "LGE Android phone" but in my pc window nothing appears, than when I use (I downloaded LGUnitedMobileDriver_Ver_3.11.3.exe) LG flash tools the 'read phone info' and 'LG mobile support tool' dont see phone What can I do?
You have to put your phone to download mode in order to see by lg flash tool. take same time and searching you will find the way. your phone isn't brick for sure.
likeadracula said:
You have to put your phone to download mode in order to see by lg flash tool. take same time and searching you will find the way. your phone isn't brick for sure.
Click to expand...
Click to collapse
How!??!
You r Genius!!!
Good afternoon. I tell my problem.
Upon receiving mobile I decided to apply some improvements on your Android 6.0 system.
The first thing I did was root with Kingoroot, install Flashify to change the recovery; I do around here because they seem to have any accessible recovery. Once I install Titamium programs such as backup and Xposed and everything worked perfect.
I made a backup with recovery installed TWRP 3.0.2-0, a microSD 64 Gbytes and try to check it and restore the copy appears the message "Error extractTarFork () process ended with error: 25".
Since then switched on, enters a loop with minimal screen flash, short vibration and so on cyclically. I have made several attempts:
- I enter recovery (vol + power on) and try to install roms from PC with recovery sideload with adb sideload, but the downside is that I can not find any specific rom of this mobile and other snapdragon 210 Roma does not work.
- Another method was through Mobile Upgrade Q - Alcatel Mobile Phones, put it in Download mode (power on + vol up + vol down) in coming, but when connected to the USB computer when leaving the Download mode and enters the same loop described above.
I would be grateful for any help or idea they could think of. If someone could get a rom of this mobile in zip to install through sideload adb I think it would be the ultimate solution.
Thanks in advance.
Some tips:
Using Mobile Upgrade Q: Turn your phone off and leave to charge until full. Then use Mobile Upgrade Q.
Also, send me a PM and I'll give you the stock partitions and tools to flash them back from windows (No Mobile Upgrade Q Needed)
I tried with Mobile Upgrade Q
I tried to recover with the Mobile Upgrade Q, enters Download mode but jumps back to a loop with a little buzz that is repeated every 2-3 seconds.
The only way I can think of after many tests is to install the rom abd through sideload from the TWRP, then try to load roms other phones with the same processor but ultimately fails.
How can I send you MP?
Hello bro
Can you help me get these partitions please?
PM is bor working for me, don't know why, tried to pm you already
luispelau said:
I tried to recover with the Mobile Upgrade Q, enters Download mode but jumps back to a loop with a little buzz that is repeated every 2-3 seconds.
The only way I can think of after many tests is to install the rom abd through sideload from the TWRP, then try to load roms other phones with the same processor but ultimately fails.
How can I send you MP?
Click to expand...
Click to collapse
Hi if u have twrp, installed I could send u backup of my pop 4
I had the same problem and I managed to unbrick the phone by using this solution I found on XDA.
Go into TWRP recovery. Then click on Advanced. Then click on Terminal and type
echo SYSTEMLESS=true>>/data/.supersu
After that flash SuperSu and reboot the phone. It bootloops once, but after that it boots normal again.
Need help? T.me/pop4uk
mygadgetgeek.com said:
Hi if u have twrp, installed I could send u backup of my pop 4
Click to expand...
Click to collapse
Hey bro, could you send me a backup, i accidently wiped the system and i cant find any stock rom out there, im desperate pls
KieranFoot said:
Some tips:
Using Mobile Upgrade Q: Turn your phone off and leave to charge until full. Then use Mobile Upgrade Q.
Also, send me a PM and I'll give you the stock partitions and tools to flash them back from windows (No Mobile Upgrade Q Needed)
Click to expand...
Click to collapse
Hi,
i know its old but i need the Nonhlos.bin (modem) for 5051x marshmallow. can you please post it here ?
it would be a great help. thanks
Yeah I have a 5051X And its boot freezing not looping should I start a new thread or this gonna need a recovery image like in the OP. I have contacted alcatel supoort to see if they have the flash image but its sunday and I expect that they are closed.
I followed some instructions re rooting my 5051X which involved installing kingroot, obtaining temporary root then using flashy to flash twrp recovery onto the device, I could never update the recovery image and I assume thats because I havn't unlocked my phone yet.
Went to remove kingroot and find it cannot be uninstalled.
So i paid for Supersume (https://play.google.com/store/apps/details?id=darkslide.com.supersumepro&hl=en) and ran that to remove kingroot(i'll prolly reinstall later to follow the guide but dont really trust the application after my lockscreen changed on its own).
Supersume seemed to complete successfully.
Then I decided to reboot the device to see if root had disappeared again after reboot but am now stuck at the alcatel screen for the last 10 mins. Looks like i'm gonna have to pull the battery to shut it down, shame I only had it around a week.
Hello everyone.
I received my le max 2 x820 6gb, o have flash The RR rom, but my Phone freeze and boot loop. I tried to reflash The rom and apears an error "unable to mount /system". I tried to flash The pure nexus, but same error. When I tried to flash The cuoco rom, The Phone reboot and nothing apears on The screen and The Blue Led light shows up.
I tried The qfil process, but The Phone stay in The EUI logo.
What can I do to save my Phone?
Sorry about my bad english.
Thanks guys.
alexfernando said:
Hello everyone.
I received my le max 2 x820 6gb, o have flash The RR rom, but my Phone freeze and boot loop. I tried to reflash The rom and apears an error "unable to mount /system". I tried to flash The pure nexus, but same error. When I tried to flash The cuoco rom, The Phone reboot and nothing apears on The screen and The Blue Led light shows up.
I tried The qfil process, but The Phone stay in The EUI logo.
What can I do to save my Phone?
Sorry about my bad english.
Thanks guys.
Click to expand...
Click to collapse
Bro, did you installed custom recovery? Did you took backup or forgot to do it?
alexfernando said:
When I tried to flash The cuoco rom, The Phone reboot and nothing apears on The screen and The Blue Led light shows up.
Click to expand...
Click to collapse
I had blue light when used wrong twrp according to rom. Try flash stock ROM to see it is able to start.
Filozof71 said:
I had blue light when used wrong twrp according to rom. Try flash stock ROM to see it is able to start.
Click to expand...
Click to collapse
Didnt Work
kavinferrara said:
Bro, did you installed custom recovery? Did you took backup or forgot to do it?
Click to expand...
Click to collapse
I have custom recovery. I deleted my backup! Do You have one? Can You send to me?
alexfernando said:
I have custom recovery. I deleted my backup! Do You have one? Can You send to me?
Click to expand...
Click to collapse
Bro, mine is x821 4gb ram. Do a thing. Download the stock firmware, rename it to update and Put it on a USB. Open the recovery.
Stock frimwere mean, not the latest updated one. The first frimwere in wich the phone came out.
For TWRP, connect the USB as OTG after opening the recovery. go to mount, select the OTG option and check it's opening or not. If not, restart the recovery and do it again. No success means try different USB device. For me, it refused to connect wirh any of SD cards. I used HP pendrive. Go to advanced settings, select syatem, cache, dalvik cache, internal and wipe everything. Then go to instal, select the firmware. It will start installing. If notx then it's not a correct firmware. After install, reboot to system. It will take more time to start. Give enough time. It will work. Phone go above 45°c in this process. Try to cool it. Going above 42°c is not good for mobile.
Sideload didn't worked for me. I tried sideload the firmware, then tried to push the firmware to internal memory via sideload, it just rejected all the commands. Maybe you try it.
If all failed, you have to unbrick it. I didn't came across your phone's service ROM. You need services rom, flash software and qualcomm's drivers. There are lots of walk-through in there about unbrick the phone.
Check androidbrick.com for the guide. If they had, you no need to serch for service rom.
To do this, you have to put the phone in EDL mode. Pressing volume up and down while booting will do it. It won't show any sign of activity in that mode. Don't worry. If incase you thought of not doing it and wanted to reboot, press the power button for about 15 seconds. It take more then 9 seconds for hard reboot.
Okay, i found the guide in there. But they tried on 4gb version. Hope it works on 6tb too
http://www.androidbrick.com/leeco-letv-x820-max-2-qdloader-9008-unbrick-twrpguide/
kavinferrara said:
Bro, mine is x821 4gb ram. Do a thing. Download the stock firmware, rename it to update and Put it on a USB. Open the recovery.
Stock frimwere mean, not the latest updated one. The first frimwere in wich the phone came out.
For TWRP, connect the USB as OTG after opening the recovery. go to mount, select the OTG option and check it's opening or not. If not, restart the recovery and do it again. No success means try different USB device. For me, it refused to connect wirh any of SD cards. I used HP pendrive. Go to advanced settings, select syatem, cache, dalvik cache, internal and wipe everything. Then go to instal, select the firmware. It will start installing. If notx then it's not a correct firmware. After install, reboot to system. It will take more time to start. Give enough time. It will work. Phone go above 45°c in this process. Try to cool it. Going above 42°c is not good for mobile.
Sideload didn't worked for me. I tried sideload the firmware, then tried to push the firmware to internal memory via sideload, it just rejected all the commands. Maybe you try it.
If all failed, you have to unbrick it. I didn't came across your phone's service ROM. You need services rom, flash software and qualcomm's drivers. There are lots of walk-through in there about unbrick the phone.
Check androidbrick.com for the guide. If they had, you no need to serch for service rom.
To do this, you have to put the phone in EDL mode. Pressing volume up and down while booting will do it. It won't show any sign of activity in that mode. Don't worry. If incase you thought of not doing it and wanted to reboot, press the power button for about 15 seconds. It take more then 9 seconds for hard reboot.
Okay, i found the guide in there. But they tried on 4gb version. Hope it works on 6tb too
http://www.androidbrick.com/leeco-letv-x820-max-2-qdloader-9008-unbrick-twrpguide/
Click to expand...
Click to collapse
Didnt Worked. ;(
alexfernando said:
Didnt Worked. ;(
Click to expand...
Click to collapse
Then you didn't tried it perfect. How come unbrick goes not working.
it is easy to recover your phone, $$$
Does anyone own this phone? It came with Android 4.4.2 and I tried to flash a TWRP recovery so I could flash Android 5.1, but that didn't work and now the SIM card isn't recognised, even after resetting it. Anyone know a fix? I can't get into recovery mode, as that is broken, and the phone keeps restarting until I turn it off, but I can access the bootloader. Please help. Thanks!