Hello everybody. I wish to share with you about my problem and how it was solved.
I tried to do root. Everything was fine. I used instructions of Gaddman (thanks him). Then I could not download any apps from google market. Later I realized that the problem was in new update.
Anyway. I decided that the problem was with root. And I uninstall KingRoot from its menu. (Maybe it should not do so in this way.) But I'm not a specialist.
Once the application is removed, the device ask for restart. And that was. After the restart appeared brand logo and nothing more. I tried hard reset with buttons but nothing happend. Android logo appears, then re-freezes LG logo.
After much searching and reading, unexpectedly i found out the how to solve that problem.
I downloaded LGmobille Support Tool from the official website. The only thing that was allowed to run was the software update. I did it and it was a miracle, phone wake.
1. Install LGmobille Support Tool
2. Follow the steps for updating software.
3. Entering danloud mod the phone. (Hold button up and connect the cable while holding the button)
4. Wait
I will be happy if it help some one .
Related
Hi to all.
Recently I bought a L9 p760, flashed with v20c open stock and then rooted. I've installed some root apps, and playing with them I've accidentally make something wrong. At the first reboot of the smartphone the LGSystemUI.apk and the Keyboard.apk crash repeatedly, showing the error modal window at every second.
So I've proceed with the Hard Reset, and reboot again. At this point things were even worse. The SetupWizard procedure appears to me, but I'm unable to skip and go on, because of SystemUI and Keyboard frequently crashes. In addition to this, the SetupWizards.apk itself crashes at the end of the procedure, and then it re-runs again from the first screen.
Now, I think that flashing the rom again I could repair this problem, but the LG flashing tool working only with a booted device connected to PC in SW mode, condition that I cannot reach at all, cause I'm stuck to the SetupWizard screen.
Now, is there a way to flash a ROM using the recovery mode? (Vol+ + central button + power)
Thanks for any help!
Hey,
I saw many posts regarding LG E615 being stuck in bootloops. I had rooted my phone a month back, yesterday i went in for a software update.(Mistake i guess) and after the update when the phone reboots, it started going into a boot loop. I had backed up my data before i updated the phone using LG PC Suite. Now when i switch on my phone, the LG icon keeps flashing on and off. Also when i go into Emergency Download mode, it starts installing the Drivers on the laptop but the LG USB Mobile Modem driver doesn't install. I even installed the driver from external source, but still to no avail. I have already downloaded the firmware for flashing my phone altogether, but will that result in all backed up data also being deleted? Or is there any other way by which i can get my phone working? Also, i forgot to mention but i am unable to open the Recovery mode of the phone as suggested on net as Pressing Volume down+Power and then releasing and pressing Home button. Please help
Thanks
Hi there! I'm a stupid-stupid person. I was trying to get Lollipop faster, so I tried to flash lollipop on my phone.
I managed to root it, but haven't done any backup, except for media and contacts.
I'll try to explain what I've done.
So I rooted the phone, entered the download mode and then I tried to flash it using LG Flash Tool 2014.
When in download mode, it was stuck at 0%, so I didn't wait to go ahead, I tried to flash it.
Now, the flash failed several times. The phone was alright then.
Further, I tried again and at some point something happened, it got to two percent, it wrote COM4 and then it failed. It might have been my antivirus that stopped the process, I'm not sure.
Well, now I have a useless phone. It keeps showing the LG logo.
The hard reset doesn't work, it's not recognized in Device manager, and it doesn't work download mode.
When I try to power it off it does so only after a long press. At first, when the screen goes black, if I release the power switch, then it will reboot again. If I press it long enough, the phone will power off.
I'm desperate, of course.
The phone was running Kitkat.
Please help,
I have stock rom rooted LG l70 d320. It works propperly but now I applied exposed module called "Commandr for Google Now
", then rebooted but...
Phone just started vibrating every second once, but screen was still black.
It continues about 10 minutes and still same...
Than i pull out my battery and place it back. Again it start vibrating but nothing more.
I tried to hard reset (volume down and power button), but it only stopped vibrating for the while.
And I tried to connect to PC (i want ro flash stock rom)too, but PC cant detect my device. So I cant use ADB to recovery
Thank you in advance for your answers.
Follow this
Follow this steps as indicated in my post. you'll need the data cable/pc cable came with your phone
https://forum.xda-developers.com/android/help/help-bootloop-lg-l70-d320-t3304382#post70962321
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.