Hi guys, my OPX fell on his screen and now the display does not work, it's all black. USB Debug is turned off, so how can I mirror the phone's screen on a Windows PC ?
Try air droid or try Google search for some applications that allow it. I have found some packages for mac osx then there will be securely one or more for windows os
In any case, u can always try a reset of your device from recovery. It should solve everything
Related
Hi,
I was wondering if anyone can help with my poorly phone?
My phone broke a couple of days ago and the screen is black and digitizer has broken therefore I’m unable to use it. I don’t think there is any point trying to get the screen fixed but it will cost as much as a new phone would. But what I would like to do is backup the data on my phone.
I have not got USB Debugging enabled and when I connect my phone to the PC, the drivers are installed and I see my phone as a portable media device but there are no files or drives to display the phones data through windows explorer! Please help!?
After some research on the internet I have downloaded [email protected] and ADB.exe but the phone is not recognised (I believe this is because USB Debugging is not enabled).
I then did some further investigation and managed to book my phone under fastboot in recovery mode and selected ADB mode, this connects to my PC and new driver is installed but I am now not sure how I can use this mode to backup my device? And enable USB debugging so I can use my phone on [email protected]
Anyone able to help?
Thanks
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Trenter87 said:
Hi,
I was wondering if anyone can help with my poorly phone?
My phone broke a couple of days ago and the screen is black and digitizer has broken therefore I’m unable to use it. I don’t think there is any point trying to get the screen fixed but it will cost as much as a new phone would. But what I would like to do is backup the data on my phone.
I have not got USB Debugging enabled and when I connect my phone to the PC, the drivers are installed and I see my phone as a portable media device but there are no files or drives to display the phones data through windows explorer! Please help!?
After some research on the internet I have downloaded [email protected] and ADB.exe but the phone is not recognised (I believe this is because USB Debugging is not enabled).
I then did some further investigation and managed to book my phone under fastboot in recovery mode and selected ADB mode, this connects to my PC and new driver is installed but I am now not sure how I can use this mode to backup my device? And enable USB debugging so I can use my phone on [email protected]
Anyone able to help?
Thanks
Click to expand...
Click to collapse
Same problem :crying:
So hello everyone i have go clever 101 tablet and i tried to upgrade firmware and i accidentaly turned my device off when i was installing firmware and now its wont turn on screen but if i plug my usb cable to pc and if i try to turn it on my pc connects to tablet and if i try to turn it off the connection disappear so i think its still alive but i cant do anything because i cant see screen its black always so maybe i can do something to tablet via pc somehow upgrade firmware with pc programs or cmd's? sorry about my english its not good ^^
Hi there,
I have a samsung galaxy s3 i9300 with broken display and I need to run a software to recover deleted files on the memory of the phone. This software requires to doo usb debugging to the phone in order to do its job. I was already able to enable it changing buold.prop using adb in recovery mode. Now the phone waits for the user to touch the "ok" button in order to allow the pc, unfurtunately my display is broken so I can't do it. Do you have any idea on how to let the phone accept adb/usb debugging connections from my pc, or to completely disable the confirmation box and accept the requests automatically?
Does your touch screen still register touch? If so, I'd try borrowing same model of phone from a friend, connecting it to computer to see where exactly is the OK button, then try to tap same location on the broken screen of your phone>
Hello,
recently my bluboo xtouch (android 5.0.1) got its display broken and so i cna't see anything on screen, so to get access again to it i wanted to use [email protected] but my device isn't recognized by adb.
the touch on the phone still works but i don't know how well, the phone is still working as it is receiving messages and phone call, i managed to get the phone connected to the same network of my pc.
Now, usb debugging should be on as i never turned it off (is there a way of testing if it is enabled?), the phone is set to PTP as windows recognize it as a camera and i can access the phone but only the folders called
DCIM and Pictures. Under device manager it shows up as a portable device. The problem is that it won't show up in adb, i tried a lot of solution but nothing worked (the adb_usb.ini is set to the right VID, i got the drivers for my phone installed, i got 2 version of adb (one sohuld be 32 another 36) one from a freshly new install of android studio and another that i think is the universal one).
IT DOES SHOW UP IF I PUT IT IN (VOL+)+(POWER) MODE
Now i have no clues of to get it working i thought that, if the problem is the PTP mode i would need screenshots of the ui so i can change the mode without seeing the real screen, but the rom that is used by my device
is not that popular.
Anyone has any idea on how to show it under adb devices?
Thanks in advance
NEWS
i managed to reach the "select type of connection" and i've tried charge mode (doesn't work), old for xp (it shows up as a cd rom), and now i'm trying with MTP but i got problem with drivers
NEWS II
i managed to connect the phone in mtp and to copy all the files i needed to the pc, but still i'd like to get [email protected] working, i can swap between connection mode (mtp, ptp, charge) and i can unlock the phone (cause it's fingerprint locked). My new problem is: how do i backup all of my contacts?
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
TheOneIsBack said:
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
Click to expand...
Click to collapse
Hi, You Might Have To Try And Figure Out Mask rom Mode To Force your Device To Be Detected By USB Burn Tool If Using The Reset Button is Unsuccessful, Look For Mask rom Mode Information, You Can Upload Pictures Of Both Sides Of Your Logic Board we can try and figure it out
aidanmacgregor said:
Hi, You Might Have To Try And Figure Out Mask rom Mode To Force your Device To Be Detected By USB Burn Tool If Using The Reset Button is Unsuccessful, Look For Mask rom Mode Information, You Can Upload Pictures Of Both Sides Of Your Logic Board we can try and figure it out
Click to expand...
Click to collapse
Hey man,
Thanks for taking the time to reply.
I managed to get it working. Decided to give it another shot this morning and for some reason, first time around it worked. USB Burning Tool instantly picked the box up, installed perfectly and now I have it up and running!! It definitely seems a lot more snappier than my last firmware.
I do have a question though. With the previous stock firmware, my TV would pick the Android box up with a HDR signal. It no longer does this now. Is that to be expected with this rom or is there something I need to do?
Sir
TheOneIsBack said:
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
Click to expand...
Click to collapse
i just bought this buzz tv box. can you guide me ? Like how to root? Which is the best rom? Best apps ? Adaway etc?