This is the custom kernel for G531H
Features:
-now you can set Selinux to Permissive or Enforcing.
-multitouch fixed up to 5
-minimal cpu frequency is 533 mhz
-maximal cpu frequency is 1500 mhz
-added 4 more governors (onedemand, conservative, powersave, userspace)
-added CPU Hotplug
Download link:
www75.zippyshare.com/v/Z4eu69x8/file.html
Is good your kernel, but when set frequency's, automatically set to 1500 mghz when I set to 1150. In next updates, can you put smartass v2 ? Plus and thank you.
cesaraban said:
Is good your kernel, but when set frequency's, automatically set to 1500 mghz when I set to 1150. In next updates, can you put smartass v2 ? Plus and thank you.
Click to expand...
Click to collapse
Will try...but now I'm busy with building Cyanogenmod 12.1
eyeless95 said:
This is the custom kernel for G531H
Features:
-now you can set Selinux to Permissive or Enforcing.
-multitouch fixed up to 5
-minimal cpu frequency is 533 mhz
-maximal cpu frequency is 1500 mhz
-added 4 more governors (onedemand, conservative, powersave, userspace)
-added CPU Hotplug
Download link:
www75.zippyshare.com/v/Z4eu69x8/file.html
Click to expand...
Click to collapse
Help me in installing this kernel? What procedure
he.barros said:
Help me in installing this kernel? What procedure
Click to expand...
Click to collapse
You need a custom TWRP Recovery. Just download this archive and install it via TWRP.
Does it affect battery life?
mody00 said:
Does it affect battery life?
Click to expand...
Click to collapse
Yes, battery lives longer 'cause minimal frequency now is 500 mhz (vs 768 on stock), lower frequency - lower voltage - better powersave
Does it work on G531M variant?
Sent from my SM-G531M using XDA Free mobile app
buenajuan300 said:
Does it work on G531M variant?
Sent from my SM-G531M using XDA Free mobile app
Click to expand...
Click to collapse
No, only G531H, based on Spreadtrum SoC
eyeless95 said:
No, only G531H, based on Spreadtrum SoC
Click to expand...
Click to collapse
And G531F ?
Cuvillier said:
And G531F ?
Click to expand...
Click to collapse
No, G531F not Spreadtrum based
eyeless95 said:
No, G531F not Spreadtrum based
Click to expand...
Click to collapse
There is a custom kernel availiable for G531F ?
Cuvillier said:
There is a custom kernel availiable for G531F ?
Click to expand...
Click to collapse
No, only G531H with Spreadtrum SC8830 SoC
what is spreadtrum? i have the sm-g531h but i don´t know what is spreadtrum :c
keylorsk8 said:
what is spreadtrum? i have the sm-g531h but i don´t know what is spreadtrum :c
Click to expand...
Click to collapse
Spreadtrum is a mobile processor. Our phone (SM-G531H) is based on this proessor and has Mali-400 MP2 GPU.
Hello can you tell me which are the custom governors of grand prime 531??
Hello bro
Can you please create one for the galaxy Core Prime VE (G361H) it's using the same Spreadtrum SoC as the grand prime VE, please do create one for us, as we have the same spec, and we don't have any development available for our phone...
I'm ready to provide you all the files and info you need and I'm ready to test them also...
Thanks in advance
Hey can anyone suggest me the best coustom rom for gionee p4s that must be lollipop 5.1. It is currently running on kitkat and it is not giving ota update. It has 1gb ram quad core processor and 8gb internal storage. I have done 1 time ota update. Should install the stock rom to flash the zip file?
SM G531H
please help
i have just flashed it on my SM G531H device by twrp recovery
flashing finnished succesfully
but my device stucked on restart screen saying by red line upper screen "kernel is not seandroid" or something like that.
is the kernel compatible with my device?
i want a kernel by any way to change SElinux mode to permissive
and thank you
eyeless95 said:
this is the custom kernel for g531h
features:
-now you can set selinux to permissive or enforcing.
-multitouch fixed up to 5
-minimal cpu frequency is 533 mhz
-maximal cpu frequency is 1500 mhz
-added 4 more governors (onedemand, conservative, powersave, userspace)
-added cpu hotplug
download link:
Www75.zippyshare.com/v/z4eu69x8/file.html
Click to expand...
Click to collapse
please port g530h.
Related
This kernel is distributed with several overclock modules.
The modules doesn't have GPL in their licenses. The sources for modules are private.
*** The frequencies below are not real. Sorry for that. I know little about detailed architecture for U8500 CPU... ***
available frequencies:
50MHz,100MHz,500MHz,1000MHz,2000MHz(can be set by modules)
Kernel Link: http://pan.baidu.com/s/1gdmXlyN
Module for overclocking to 1.2 GHz(Stable): http://pan.baidu.com/s/1pJz8i6Z
Module for overclocking to 1.5 GHz(Stable): http://pan.baidu.com/s/1jG3giWI
Module for overclocking to 2.0 GHz(Still testing): http://pan.baidu.com/s/1bnfDNBp
If you like the kernel any donations are welcome: alipay account: 15190852698 I will build a kernel for you if you donate me
If you want to use this in your ROM:
1. PM me first
2. Don't touch the kernel(e.g. extract or modify zImage or ramdisk). You will easily get problems e.g. not booting and wifi not working
3. Don't put anything that you can get money from it in your ROM.
Recovery:
Camera button only after vibrate will bring you into TWRP
Power button only after vibrate will enter CWM
If you press both keys after vibrate you will enter kexec bootmenu.
***Read this before you flash the kernel!***
The kernel only supports /data and /cache of f2fs filesystem. You will get a bootloop if you use ext4 for the two partitions. But use ext4 for /system.
mkfs.f2fs_arm link: http://pan.baidu.com/share/link?shareid=855746158&uk=3137347581
Don't ask me for source. It's from internet.
******
Kernel source: https://github.com/FandroidRelease/android_kernel_sony_u8500/tree/overclock
XDA:DevDB Information
Fandroid Kitkat Kernel, Kernel for the Sony Xperia P
Contributors
zhy0919, XperiaSTE, Sony, CM11
Kernel Special Features: based on XperiaSTE's overclock source, with overclocking modules
Version Information
Status: Beta
Created 2014-08-31
Last Updated 2014-08-31
deleted
big-A said:
deleted
Click to expand...
Click to collapse
What do you mean??
Bootloop
I installed your kernel with cm 11 M9 and slimkat 7.6 and everytime i get a bootloop
How to install those modules? How to access recovery, power button?
This kernel looks promising, but could you please provide more information such as the recovery that comes with it, if theres one; or the features besides having the overclock modules that it has etc. Thank you. Good job overall.
big-A said:
I installed your kernel with cm 11 M9 and slimkat 7.6 and everytime i get a bootloop
Click to expand...
Click to collapse
Sorry I didn't mentioned some important information in my post.
Please format /data and /cache to f2fs if you want to use the kernel.
And also, if you flashed another ROM, you will need to mkfs.f2fs again.
mkfs.f2fs_arm link: http://pan.baidu.com/share/link?shareid=855746158&uk=3137347581
macabrocabral said:
How to install those modules? How to access recovery, power button?
Click to expand...
Click to collapse
Post updated
ArtemisRider said:
This kernel looks promising, but could you please provide more information such as the recovery that comes with it, if theres one; or the features besides having the overclock modules that it has etc. Thank you. Good job overall.
Click to expand...
Click to collapse
Thanks. Post updated.
Novathor chips can go up to 1,3ghz. 1.2 ghz is a safest option. Overclocking that much a novathor SoC without changing voltages will only consume severe power leading to overheat. Due too the aluminium design of xperia p you will not notice so much heat but when graphics artifacts start to occur then i hope you have the budget needed to buy several phones to payout the users.
Cheers
nicolassp said:
Novathor chips can go up to 1,3ghz. 1.2 ghz is a safest option. Overclocking that much a novathor SoC without changing voltages will only consume severe power leading to overheat. Due too the aluminium design of xperia p you will not notice so much heat but when graphics artifacts start to occur then i hope you have the budget needed to buy several phones to payout the users.
Cheers
Click to expand...
Click to collapse
Even i have read that 1.2ghz is the safest option for novathor overclocking. thnx for confirming.
Dammit!
I thought that fake overclocks and/or underclocks will die with the real overclock, but as I can sadly see this is not true. First of all, the commit which increases frequency in the repo of the GitHub link provided does NOT change the needed registers to increase frequency. Secondly, if the work of this thread would work at 50Hz the phone would die and at 2GHz everything will crash automatically, this is just placebo effect, a nonsense placebo effect.
Garcia98 said:
Dammit!
I thought that fake overclocks and/or underclocks will die with the real overclock, but as I can sadly see this is not true. First of all, the commit which increases frequency in the repo of the GitHub link provided does NOT change the needed registers to increase frequency. Secondly, if the work of this thread would work at 50Hz the phone would die and at 2GHz everything will crash automatically, this is just placebo effect, a nonsense placebo effect.
Click to expand...
Click to collapse
Thanks and sorry. But can you tell me why the total current of the phone seems to be much higher when at the highest frequency?
zhy0919 said:
Thanks and sorry. But can you tell me why the total current of the phone seems to be much higher when at the highest frequency?
Click to expand...
Click to collapse
What do you mean with "current of the phone"?
Garcia98 said:
What do you mean with "current of the phone"?
Click to expand...
Click to collapse
current_now in ab8500_fg
zhy0919 said:
current_now in ab8500_fg
Click to expand...
Click to collapse
I don't get you, do you mean charge_now?
Garcia98 said:
I don't get you, do you mean charge_now?
Click to expand...
Click to collapse
/sys/class/power_supply/ab8500_fg/current_now
zhy0919 said:
/sys/class/power_supply/ab8500_fg/current_now
Click to expand...
Click to collapse
For me that value is very similar even with real overclock, and it changes a lot from second to second. To check if overclock works the best idea is to make a benchmark and check ARM PLL registers.
I agree with Garcia98. The overclock cannot be done on this motherboard/CPU and the 2GHz overclock will fry the components in no time.
Garcia98 said:
For me that value is very similar even with real overclock, and it changes a lot from second to second. To check if overclock works the best idea is to make a benchmark and check ARM PLL registers.
Click to expand...
Click to collapse
Really thanks... By the way where can I find documentations about novathor CPUs? And how to modify u8500 cpu's pll register(what value can be set and why)? Thanks for your answer!!
This is the custom kernel for Sansung Galaxy Alpha (Exynos variant).
Features:
uc/oc: a7 200-1800, a15 200-2000
knox removed
init.d support
busybox and su install
battery and performance tweaks
.. and much more
to control install Synapse for play store
Download:
r2.2 - https://yadi.sk/d/cP8KVguZennCy
r2.1 - https://yadi.sk/d/_LyYroAaehJJX
r2 - https://yadi.sk/d/38sJf4kjeh7N5
r1 - https://yadi.sk/d/r8aZnDu7dYpvp
Changelog:
r2.2 - selinux is permissive now
r2.1 - http://forum.xda-developers.com/showpost.php?p=58874096&postcount=103
r2 -http://forum.xda-developers.com/showpost.php?p=58868400&postcount=97
Thanks to:
Andreilux, UpInTheAir and many others who spend their time to develop for exynos platform
Sources:
https://github.com/bonuzzz/kernel_g850
XDA:DevDB Information
Custom kernel for Samsung Alpha, Kernel for the Samsung Galaxy Alpha
Contributors
bonuzzz
Kernel Special Features:
Version Information
Status: Stable
Created 2014-12-22
Last Updated 2015-03-31
What variants can this be flashed to?
Sent from my SAMSUNG-SM-G850A using XDA Free mobile app
yoyochuckd said:
What variants can this be flashed to?
Sent from my SAMSUNG-SM-G850A using XDA Free mobile app
Click to expand...
Click to collapse
woooww,now custom kernal arrive to us,thanks m8 for your effort:good:
---------- Post added at 09:34 ---------- Previous post was at 09:25 ----------
as I know is only for 850F users coz Snapdragon Ausers dont have root & recovery till now
---------- Post added at 09:36 ---------- Previous post was at 09:34 ----------
bonuzzz said:
This is the custom kernel for Sansung Galaxy Alpha.
Features:
uc/oc: a7 200-1800, a15 200-2000
knox removed
init.d support
busybox and su install
battery and performance tweaks
.. and much more
to control install Synapse for play store
Download:
https://yadi.sk/d/r8aZnDu7dYpvp
Thanks to:
Andreilux, UpInTheAir and many others who spend his time to develop for exynos platform
XDA:DevDB Information
Custom kernel for Samsung Alpha, Kernel for the Samsung Galaxy Alpha
Contributors
bonuzzz
Kernel Special Features:
Version Information
Status: Stable
Created 2014-12-22
Last Updated 2014-12-22
Click to expand...
Click to collapse
hi @bonuzzz
do you have some profiles for contoling oc/uv & so
yoyochuckd said:
What variants can this be flashed to?
Sent from my SAMSUNG-SM-G850A using XDA Free mobile app
Click to expand...
Click to collapse
I haven't known about qualcomm variant before, so this kernel is for exynos only.
@hensk, I dont have any specific profiles for now, because I'm also testing different combinations.
I tested the at 2.0GHz and performance govenor and I didn't notice any heat.
I recommend 500-1.8 for a15 cores and 200-1.8 to a7.. But you can set limit for a15 200-2.0. At this variant I haven't any lags and haven't notice additional battery drain.
hi bonuzzz
can you give us possablity to change system from dalvic to ART in your custom rom
hensk said:
hi bonuzzz
can you give us possablity to shange system from dalvic to ART in your custom rom
Click to expand...
Click to collapse
It's not ROM. This is kernel only for stock rom
already flashed your kernal m8,
..charging now
bonuzzz said:
I haven't known about qualcomm variant before, so this kernel is for exynos only.
@hensk, I dont have any specific profiles for now, because I'm also testing different combinations.
I tested the at 2.0GHz and performance govenor and I didn't notice any heat.
I recommend 500-1.8 for a15 cores and 200-1.8 to a7.. But you can set limit for a15 200-2.0. At this variant I haven't any lags and haven't notice additional battery drain.
Click to expand...
Click to collapse
From where you control over and under clocking? i mean which app.
If it overclocks...I WANT it badly
Oh! Finally it's time to root my alpha! Now we have a good reason! Many thanks bonuzzz for this big work
zarras said:
From where you control over and under clocking? i mean which app.
If it overclocks...I WANT it badly
Click to expand...
Click to collapse
Install Synapse from play store
Still no root for Qualcomm?
Sent from my SGH-T999L using XDA Free mobile app
Thanks to your work.
Did you have repository cor this kernel?
I want to port this source for g850s.
hi bonuzz could u please implement tap2wake feature on this kernel? btw thanks for your good work. keep it up.
saxmydix said:
hi bonuzz could u please implement tap2wake feature on this kernel? btw thanks for your good work. keep it up.
Click to expand...
Click to collapse
this will be awesom port for Alpha
Thank you for the kernel.
Does exynos undervolt well ? If yes please add undervolt.
Hopefully I can squeeze another extra 2-3 hours battery life.
After one day of intense test, the stability its very good, at max frequency too. Antutu confirm my sensation ofincreased speed
https://www.dropbox.com/s/7dw9s8ch8geb2b7/Screenshot_2014-12-24-17-18-06.png?dl=0
Does the kernel changes the flag knox 0x1
oxygen2222 said:
Does the kernel changes the flag knox 0x1
Click to expand...
Click to collapse
to install kernel you require cwm and cwm does flag knox 0x1.
maybe you should make PM direct contact with OP or @modpunk
One little problem I've noticed: the settings that I have chose with synapse, at reboot are changed, maybe by the sistem. How I do for have the choices of new frequencies permanently? Thanks in advance! PS I have tried dvfs disabled with xposed installer but nothing..
This is a custom kernel for Samsung galaxy J7(Exynos variants of J7)
Use Kernel Aduitor app from Play Store to change kernel parameters.
Changelogs
v2.5
Compiled with UBERTC GCC 6.0
Update to Linux 3.10.94
Remove EXYNOS_STAT_LOG ,Wifi debug ,Android logger and PROFILING
Kernel Quick Wakeup feature(for better battery)
Governors(Hyper,preservative,conservativex,alucard,darkness,nightmare,wheatley,smartassV2,Ondemandplus,dancedance,bioshock,lionheart)
Sio I/O Scheduler
Fix installtion of Busybox
Nvidia power efficiency patches
Optimize LowMemoryKiller driver(kernel side)
Use Powersuspend driver for decon
Frandom
Dynamic Sync control(Faux123)
Many other changes(see github repository)
V2.1
Fixed battery drain in V2(hopefully)
Updated UBERTC 5.2.1 toolchain
V2.0
Compiled with UBERTC GCC 5.2
Update to latest Linux 3.10.90 from 3.10.61
FLashable zip(flash with TWRP)
Busybox
Remove Knox notification
Add BFQ and FIOPS I/O Scheduler(Change them with app 'Kernel Aduitor' on Play Store)
Remove some debug
Disable SEC_OOM_KILLER
Optimize SLUB memory allocator
Reduce wifi battery drain
Optimize cpu hotpllugging
Optimize Deadline I/O Scheduler
Some other misc. changes(See on github)
V1.0
SELinux set to Permissive mode
Compiled with UBERTC GCC 4.9.4
cortex-a57.cortex-a53 optimizations
Files attached in post!
Instructions
You must be rooted ! How to Root? See here: http://sharvinzlife.blogspot.in/2015/10/samsung-galaxy-j7-sm-j700f-tips-and.html
Copy custom_kernel_v2.5.zip(Do not download, v1,it is outdated)
Flash with TWRP recovery :good:
Sources
https://github.com/sakindia123/android_kernel_samsung_j700F
Reserved post
Knox crap in kernel
after some research, found something to remove knox crap from kernel (which taps in the usage of device to make security logs)
here's the thread, jus look into it once
http://forum.xda-developers.com/showthread.php?t=2599266
:angel:
I believe i have managed to silence knox,will make the next kernel update TWRP installable .
Kernel Updated to v2.0,Flash with TWRP!
sakindia123 said:
Kernel Updated to v2.0,Flash with TWRP!
Click to expand...
Click to collapse
Thanks i like it.
Sent from my SM-J700F using Tapatalk 2
Kernel works great ! Thanks @sakindia123 you're awesome !
i looked at the code source i can't find OC tables .. my device J700H ..................................can you plz poste antutu score... and plz can you work on cm13...
nanoteam said:
i looked at the code source i can't find OC tables .. my device J700H ..................................can you plz poste antutu score... and plz can you work on cm13...
Click to expand...
Click to collapse
Antutu score is 39000 on my J700F.
I also am not able to overclock the device.Layout is very different from Exynos 7420 and Exynos 5433
sakindia123 said:
Antutu score is 39000 on my J700F.
I also am not able to overclock the device.Layout is very different from Exynos 7420 and Exynos 5433
Click to expand...
Click to collapse
so can you work on cm13... i know will get anroid m in the future but i like more cm roms
---------- Post added at 08:50 PM ---------- Previous post was at 08:49 PM ----------
kernel work stable for now ... i need more tweaking on gpu to get more performance.... thanks man
Hi sir. Kernel v2 is good. But i feel faster battery drain in my j700h. May be in nxt update u try to fix it. But over all its very nice and smooth. Thanks
Serious bug found in the custom kernel v2
Initially on stock kernel, when outdoor mode in notification panel was enabled, brightness was set to max for convenient viewing under direct sunlight.
But after flashing the custom kernel v2, as soon as outdoor more is clicked, device reboots. Not just once or twice but every time its clicked. Please fix the issue in the custom kernel v3.
And somebody please upload the stock kernel for the time being. Moreover can somebody please check & reply whether the same issue is in the custom kernel v1. Apart from this, is there way to remove the kernel modified notification appearing in the upper left corner when device gets booted, though it's not a major problem but a bit annoying & eye catchy.
Last but not the least, is there a way to receive regular updates in this rooted J700F. If not then where to manually download the latest updates & flash it via custom recovery.
Looking forward to a positive reply&thanks in advance.
hi i want to ask the kernel source in title say .is for J700F with qualcom chipset but in arch64 i find just exynos chipset files no qualcom so is this for J700H or the two has exynos
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
darksam96 said:
Serious bug found in the custom kernel v2
Initially on stock kernel, when outdoor mode in notification panel was enabled, brightness was set to max for convenient viewing under direct sunlight.
But after flashing the custom kernel v2, as soon as outdoor more is clicked, device reboots. Not just once or twice but every time its clicked. Please fix the issue in the custom kernel v3.
And somebody please upload the stock kernel for the time being. Moreover can somebody please check & reply whether the same issue is in the custom kernel v1. Apart from this, is there way to remove the kernel modified notification appearing in the upper left corner when device gets booted, though it's not a major problem but a bit annoying & eye catchy.
Last but not the least, is there a way to receive regular updates in this rooted J700F. If not then where to manually download the latest updates & flash it via custom recovery.
Looking forward to a positive reply&thanks in advance.
Click to expand...
Click to collapse
yep me two...
Could this kernel work in J700M? Someone test it in this model?
This kernel works on exynos models of j7 ( this includes j700h/f models)
messi2050 said:
This kernel works on exynos models of j7 ( this includes j700h/f models)
Click to expand...
Click to collapse
Ok but excuse me for my noob question sir. Samsung J700M do not have exynos Microprocessor? And which Microprocessor use? Thanks in advance
cachok9999 said:
Ok but excuse me for my noob question sir. Samsung J700M do not have exynos Microprocessor? And which Microprocessor use? Thanks in advance
Click to expand...
Click to collapse
It will not work on J700M!Dont try
sakindia123 said:
It will not work on J700M!Dont try
Click to expand...
Click to collapse
Thanks you @sakindia123 for your useful information
Hi guys I check my information again and I have noticed that my Chipset is Samsung Exynos 7 Octa 7580
So, could I use this kernel? Thanks.
cachok9999 said:
Hi guys I check my information again and I have noticed that my Chipset is Samsung Exynos 7 Octa 7580
So, could I use this kernel? Thanks.
Click to expand...
Click to collapse
yes
*Initial version: v0.1*
AOSP m7 cm-12.1
Based on AGK v1.71 (containing all the original wake gestures: sweep2wake, logo2menu, double tap to wake)
F2FS support from latest msm8960 repo on cm-12.1
GCC KBUILD_CFLAGS tweaks from SiliconValley kernel (oodles of optimizations)
Using SiliconValley initrd (ramdisk)
- cpu governors: plenty of them: intellidemand, ondemand, interactive, smartass, smartassV2, ...
- mpdecision, intelliplug, ecomode tweaks
- highest frequency at 2,1Ghz, lowest at 0,081Ghz, good for saving more battery
- gives more than 36 hours of battery life on a moderately used phone with steady mobile signal
install using fastboot: sudo fastboot flash boot jekkoskrnl.img
*21/12/2015: v0.1 Update*
Performance tweaks: disabled GPU underclock.
Min frequency is set to 128Mhz (was 64)
Max frequency is set to 487Mhz (was 450)
download link: bit.ly/1IjAEGw
*23/01/2016: v0.2 Update*
Dissable reboot on mdm start timeout (causing occasional kernel panics)
Improve GPU frequency upscaling to reduce lagging
Merge of upstream Cyanogenmod fixes
Disable htc one wire headset patch (causing occasional kernel panic with alternative earset)
download link: http://bit.ly/1ZU2yRK
github (cm12.1 branch) link: https://github.com/jekkos/android_kernel_htc_msm8960
jekk0s said:
This is a thread containing a link to my kernel build for
AOSP m7 cm-12.1
download link: bit.ly/1IjAEGw
github link: https://github.com/jekkos/android_kernel_htc_msm8960
Click to expand...
Click to collapse
Hey @jekk0s Thanks for that.
Just 1 Q
Is your Git source up to date? I just built your kernel and the version I built has a few less CPU governors then the .img you uploaded
Other then that Kernel works great! Compiled with UberTC-4.9
Thanks again.
Joeisgood99 said:
Hey @jekk0s Thanks for that.
Just 1 Q
Is your Git source up to date? I just built your kernel and the version I built has a few less CPU governors then the .img you uploaded
Other then that Kernel works great! Compiled with UberTC-4.9
Thanks again.
Click to expand...
Click to collapse
Ok I might have forgotten to push those last set of config changes, will have a look later today and get back to you.
jekk0s said:
Ok I might have forgotten to push those last set of config changes, will have a look later today and get back to you.
Click to expand...
Click to collapse
I've updated the github with some more local changes. To enable the governors you'll need to use the m7_defconfig
make m7_defconfig
jekk0s said:
I've updated the github with some more local changes. To enable the governors you'll need to use the m7_defconfig
make m7_defconfig
Click to expand...
Click to collapse
Thanks for that!
Joeisgood99 said:
Thanks for that!
Click to expand...
Click to collapse
Does this work on exodus ROM?
Your kernel is pretty good on batery life but my phone tends to stutter and lag on this kernel.
Sinistersky said:
Does this work on exodus ROM?
Click to expand...
Click to collapse
No, it doesn'twork
crownvn said:
No, it doesn'twork
Click to expand...
Click to collapse
It does for me.
crownvn said:
No, it doesn'twork
Click to expand...
Click to collapse
Neither does it for me
steinsgateislove said:
It does for me.
Click to expand...
Click to collapse
what does rom ?
steinsgateislove said:
Your kernel is pretty good on batery life but my phone tends to stutter and lag on this kernel.
Click to expand...
Click to collapse
Think the default governor might not be the best. I'm using intellidemand which makes the phone work smoothly in most situations.
Works great on CM12.1. Is there anyway that I could set the minimum GPU frequency on boot? Maybe using an init.d script?
Sinistersky said:
Does this work on exodus ROM?
Click to expand...
Click to collapse
Works for me on 'exodus-5.1-20151225-NIGHTLY-m7.zip'
EDIT: I take it back, won't complete booting, just hangs on the boot animation...
jekk0s said:
Think the default governor might not be the best. I'm using intellidemand which makes the phone work smoothly in most situations.
Click to expand...
Click to collapse
will the kernel work with android m, please?
Very VEEEERY good work . Love the overclock 2.1 GHZ !!!!!! i can see the difference in games . work on Exodus 5.1.1 2016 but , lagging on music , unloking or keyboard use . higher GPU frequencies can be use ? Like 500mhz ,or like same sense kernel (587 MHz :0 )
Sorry for my english ^^
which software you guys using for tuning kernel.
I tried several, after restart its resetting some times even after exiting the app. I am encountering frequent restarts and higher temperature.
Tried clean, still issue persists. I can't live without double tap to wake and sweep to sleep.
Device being secondary, not interested in much performance , I just need basic features and stability. I tried under volt the cpu , it didn't boot then.
Was on ARHD and elementalx before. Was going good.
Recently jumped to cm.
Any suggestions?
I use Ex kernel manager for change my CPU and gpu frequencies , active fastcharge , ....
I hope that the next update propose more gpu frequencies , the currents , and more higher really more than 450
On exodus rom the phone seems stable , but lag on internet or music use (unpleasant) :/ I've try differents gorvernor but no real change ...
Do I need to flash it using the command line or can I use Flashify for that? [emoji4]
Stachura5 said:
Do I need to flash it using the command line or can I use Flashify for that? [emoji4]
Click to expand...
Click to collapse
Flashify should work fine. I used it myself.
Compatibility:
LineageOS 14.1 based roms; reported working with most 7.1.2 ROMs.
Download:
See attachments.
How to install:
Flash the zip.
If you come from another kernel, dirty flash your rom or LineageOS's boot.img before flashing this one (that also includes ROMs that come with a different kernel built-in).
Features:
Flash and forget
All cores are unlocked and unshackled
No hotplug (see: https://forum.xda-developers.com/showpost.php?p=72198795&postcount=140)
Spectrum support (Info: https://forum.xda-developers.com/showpost.php?p=72804608&postcount=192)
Reduced idle power consumption (don't complain about 3rd party wakelocks)
some wakelocks are blocked by default (thanks to @franciscofranco)
Credits:
@franciscofranco's zips.
Powered by: AnyKernel2 - @osm0sis
Extra thanks:
@karthick and @chaubeyprateek - Hyper Kernel
Interactive how-to: [GUIDE] [AKT] Advanced Kernel Tweaks by @Asiier, @patalao, @Mostafa Wael and @Senthil360
I am trying this out.Will you add d2w?
Working here on a6020a40 sd415 indian varient.
bodafranus said:
Compatibility:
Android Nougat 7.1.1 Lineage OS 14.1 based roms.
A6020 (tested only on l36 variant)
Download:
http://www106.zippyshare.com/v/IcjLb4RP/file.html
(will move to AFH shortly)
How to install:
Flash the zip.
Features:
Flash and forget
All cores are unlocked and unshackled
Reduced idle power consumption (don't complain about 3rd party wakelocks)
Wakelocks blocked by default (thanks to @franciscofranco)
Changelog:
https://gist.github.com/LegendMaster/767d12c93c5fc53dc5f214b4e10fce29
Source:
https://github.com/LegendMaster/android_kernel_lenovo_msm8916/tree/experimental
Known bugs:
Minimum frequencies on big cluster reverting to 960MHz. CPU Freq driver doesn't seem to remember policy->user_policy.min when waking up from suspended state.
You tell me. :good:
Credits:
init.rc all from @franciscofranco zips.
Powered by: AnyKernel2 - @osm0sis
HMP Scheduler and insights: [GUIDE] [AKT] Advanced Kernel Tweaks
Extra thanks:
@Dreamstar - Vegito Kernel
@chaubeyprateek - Hyper Kernel
Click to expand...
Click to collapse
Finally someone developing a different kernel! Very much appreciated!
Take a look at ExtremeKernel, it adds some bits missing from stock Kernel that would be nice to see here (Extreme seems to be discontinued).
Gonna follow this thread and try it!
@bodafranus thanks for a great kernel! Working here o a40 sd 415 indian variant. Here one bug though.. touch response is not working on ambient display.. it has been fixed in latest commits by Karthik. Kindly include these fixes in next version. Thanks!
Waiting for Alpha1 to try it! When will it be available?
Changelog seems to be promising!!
New version:
alpha1
1. changed governor and HMP scheduler values.
2. added bw_hwmon shenanigans to ramdisk (responsible for controlling some bus frequencies)
3. updated some drivers
4. merge 'caf/LA.BR.1.2.9_rb1.12' (kang from: karthick111)
If you experience any problems, send logs. (some can be found at: /sys/fs/pstore)
tanx said:
I am trying this out.Will you add d2w?
Click to expand...
Click to collapse
Not my priority, still have tons of patches to apply.
You can use Gravity Screen with everything but "Turn Screen ON by Proximity" disabled.
dr.bathman said:
Working here on a6020a40 sd415 indian varient.
Click to expand...
Click to collapse
Thanks.
IagoJevaux said:
Finally someone developing a different kernel! Very much appreciated!
Take a look at ExtremeKernel, it adds some bits missing from stock Kernel that would be nice to see here (Extreme seems to be discontinued).
Gonna follow this thread and try it!
Click to expand...
Click to collapse
You're welcome.
dr.bathman said:
@bodafranus thanks for a great kernel! Working here o a40 sd 415 indian variant. Here one bug though.. touch response is not working on ambient display.. it has been fixed in latest commits by Karthik. Kindly include these fixes in next version. Thanks!
Click to expand...
Click to collapse
I haven't seen anything in his commits related to this. Could you be more specific?
IagoJevaux said:
Waiting for Alpha1 to try it! When will it be available?
Changelog seems to be promising!!
Click to expand...
Click to collapse
Available now.
Is it working on a46?
Sent from my Lenovo Vibe K5 Plus using XDA Labs
AmithNRG said:
Is it working on a46?
Sent from my Lenovo Vibe K5 Plus using XDA Labs
Click to expand...
Click to collapse
You'll have to test it yourself or wait for somebody else's feedback.
The OP only has the l36 variant.
It's working on a46. I have it and working. Thanks for the work.
It seems kernel is not fully compatible with vibe k5 a6020a40 sd 415 Indian varient. Phone gets booted only if flashed over hyper kernel of prateekchaubey. But if lm kernel is flashed over stock lineage kernel, phone gets stuck at bootlogo. I checked both alpha0 & alpha1 versions after I got this. Logs from sys/fs/pstore has been attached which are after flashing alpha1 over hyper kernel.
And touch on ambient display is still not working with alpha1 version.
dr.bathman said:
It seems kernel is not fully compatible with vibe k5 a6020a40 sd 415 Indian varient. Phone gets booted only if flashed over hyper kernel of prateekchaubey. But if lm kernel is flashed over stock lineage kernel, phone gets stuck at bootlogo. I checked both alpha0 & alpha1 versions after I got this. Logs from sys/fs/pstore has been attached which are after flashing alpha1 over hyper kernel.
And touch on ambient display is still not working with alpha1 version.
Click to expand...
Click to collapse
@bodafranus
List of bugs:
timer_rate fixed on Little cluster, unable to change it.
minimum frequency on big cluster reverting to default after CPU wakes from suspended state.
AmithNRG said:
Is it working on a46?
Click to expand...
Click to collapse
Should work.
tanx said:
It's working on a46. I have it and working. Thanks for the work.
Click to expand...
Click to collapse
Thanks for letting me know
dr.bathman said:
It seems kernel is not fully compatible with vibe k5 a6020a40 sd 415 Indian varient. Phone gets booted only if flashed over hyper kernel of prateekchaubey. But if lm kernel is flashed over stock lineage kernel, phone gets stuck at bootlogo. I checked both alpha0 & alpha1 versions after I got this. Logs from sys/fs/pstore has been attached which are after flashing alpha1 over hyper kernel.
And touch on ambient display is still not working with alpha1 version.
Click to expand...
Click to collapse
That's strange, can you try flashing over latest official Lineage, after a Factory Reset wipe?
Try to grab a logcat while in bootloop, if it persists (see: https://forum.xda-developers.com/showthread.php?t=2274119)
I will check Ambient Display after I fix some issues.
bodafranus said:
List of bugs:
timer_rate fixed at 60000 on Little cluster, unable to change it.
minimum frequency on big cluster reverting to default after CPU wakes from suspended state.
Should work.
Thanks for letting me know
That's strange, can you try flashing over latest official Lineage, after a Factory Reset wipe?
Try to grab a logcat while in bootloop, if it persists (see: https://forum.xda-developers.com/showthread.php?t=2274119)
I will check Ambient Display after I fix some issues.
Click to expand...
Click to collapse
Ok.. I tried it on official lineage 10/4 build with fresh flash and the lm kernel alpha 1 is working without any problem like bootloop/stuck to bootlogo.
i am not using this kernel even not other, but having big trouble with lineage OS, basically cpu core bug i can say and i asked on its respective thread, page 72 and 73, dev and other users helped me but partially solved you can refer if you want to, but i will explain anyway here shortly,
i am using 20170410 built, and kernel adiutor, selinux permissive, i tried switching all possible options like core control, clock speed, governor, other thing, the only thing bug me is governor, like interactive and ondemand, max 1497mhz and min 200mhz i set, but it always on 1497mhz when even idle little process and core directly goes offline when no use, and never downclock, i also found too much over heating when any games or heavy task.
(**this is not bug of this kernel,
and this exactly same paragraph i'll be posting on lineage os thread, so if you like to suggest me about this bug you can in that thread )
so back to main track, will this kernel solve this problem?
also i see alpha 2 change log but no built.
dr.bathman said:
Ok.. I tried it on official lineage 10/4 build with fresh flash and the lm kernel alpha 1 is working without any problem like bootloop/stuck to bootlogo.
Click to expand...
Click to collapse
Great.
bik95122 said:
i am not using this kernel even not other, but having big trouble with lineage OS, basically cpu core bug i can say and i asked on its respective thread, page 72 and 73, dev and other users helped me but partially solved you can refer if you want to, but i will explain anyway here shortly,
i am using 20170410 built, and kernel adiutor, selinux permissive, i tried switching all possible options like core control, clock speed, governor, other thing, the only thing bug me is governor, like interactive and ondemand, max 1497mhz and min 200mhz i set, but it always on 1497mhz when even idle little process and core directly goes offline when no use, and never downclock, i also found too much over heating when any games or heavy task.
(**this is not bug of this kernel,
and this exactly same paragraph i'll be posting on lineage os thread, so if you like to suggest me about this bug you can in that thread )
Click to expand...
Click to collapse
Wrong thread. If you demand CPU power obviously it'll deliver, so expect it with heavy tasks. Overheat is a problem inherently of our device and its chassis, after all metals are good heat conductors...
Check your target_loads and background processes if you encounter this problem while idle.
bik95122 said:
so back to main track, will this kernel solve this problem?
Click to expand...
Click to collapse
It may, because tunables are already set up properly by default.
bik95122 said:
also i see alpha 2 change log but no built.
Click to expand...
Click to collapse
Yeah, no point in releasing a build with minimal changes. Next one will come up shortly with some bug fixes.
bodafranus said:
Wrong thread. If you demand CPU power obviously it'll deliver, so expect it with heavy tasks. Overheat is a problem inherently of our device and its chassis, after all metals are good heat conductors...
Check your target_loads and background processes if you encounter this problem while idle.
It may, because tunables are already set up properly by default.
Yeah, no point in releasing a build with minimal changes. Next one will come up shortly with some bug fixes.
Click to expand...
Click to collapse
really appreciate , i am gonna try this right now and sure will giving you some feedback, thanks.
quick feed, changes i see. A46 device
- little cores working very good as expected now, clock speed interactive as on demanded, which i prefer.
-but big core just stay at 1497 mhz constant (which i know its not problem on this kernel, it from lineageos rom that why i tried using this kernel to see fix) but i know someday may be solved by this kernel,
-one more thing i notice on small core, as its clock speed is as on demanded, but all 4 core speed same, instead of individual.
-now no core get automatically shutdown, even if no demand of an individual core. which is good as well as bad (i am kind of confused for this)
that all, this changes i looked as after flash just now.
bik95122 said:
-but big core just stay at 1497 mhz constant (which i know its not problem on this kernel, it from lineageos rom that why i tried using this kernel to see fix) but i know someday may be solved by this kernel,
Click to expand...
Click to collapse
this problem solved, this above mentioned problem is related to problem below quoted one
bik95122 said:
-one more thing i notice on small core, as its clock speed is as on demanded, but all 4 core speed same, instead of individual..
Click to expand...
Click to collapse
actually, its kernel adiutor doing, when i used cpuz, it showed all cpu at 200mhz which i set, and kernel adiutor need 2 full speed core to work smoothly, so kernel throttles to max clock speed of all 4 big core, instead of 2,
so far i am happy, thnks :good:
bik95122 said:
this problem solved, this above mentioned problem is related to problem below quoted one
actually, its kernel adiutor doing, when i used cpuz, it showed all cpu at 200mhz which i set, and kernel adiutor need 2 full speed core to work smoothly, so kernel throttles to max clock speed of all 4 big core, instead of 2,
so far i am happy, thnks :good:
Click to expand...
Click to collapse
How is the battery usage in this kernel