Related
Hi, people...
Just wondering if there is a way out of my situation, last night I installed the latest recovery image (RA-hero-v1.5.3.1), prior to that I put the latest Villian Rom on to update, but I think I messed things up, with some of the new menus in the Recovery rom as I accidently hits a few things :-(
Messages I'm getting are on almost every option I try is : E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0 (no such file or directory)
and
E:Can't mount SDCARD:/nandroid/
If I try any other options aswell I get "Error: Run 'bart' via adb" which is no good when I get the adb messages as for some reason my windows 7 pc has stopped detecting the phone in adb mode?!
The normal Hero bootloader get's detected fine in windows, is there anything I can do here to restore the system. I think some messages flashed by saying missing image! Which don't sound good.
Any ideas on how I can fix this?
if you have access to fastboot as you say, I'm sure you could fastboot recovery (just in case there's some weird issue there), then format the SD card and restore from a nandroid backup on your PC (I hope you took a copy of the backup on a PC).
Other than that, you might need to wait on someone like kendong2 to spread his words of wisdom here, as he seems good at solving stuff like this.
lechy said:
Hi, people...
Just wondering if there is a way out of my situation, last night I installed the latest recovery image (RA-hero-v1.5.3.1), prior to that I put the latest Villian Rom on to update, but I think I messed things up, with some of the new menus in the Recovery rom as I accidently hits a few things :-(
Messages I'm getting are on almost every option I try is : E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0 (no such file or directory)
and
E:Can't mount SDCARD:/nandroid/
If I try any other options aswell I get "Error: Run 'bart' via adb" which is no good when I get the adb messages as for some reason my windows 7 pc has stopped detecting the phone in adb mode?!
The normal Hero bootloader get's detected fine in windows, is there anything I can do here to restore the system. I think some messages flashed by saying missing image! Which don't sound good.
Any ideas on how I can fix this?
Click to expand...
Click to collapse
For the phone not being detected in adb mode? what shows in device manager when its plugged in under universal serial bus?
try formatting the card using a linux live disc like gparted...
anon2122 said:
if you have access to fastboot as you say, I'm sure you could fastboot recovery (just in case there's some weird issue there), then format the SD card and restore from a nandroid backup on your PC (I hope you took a copy of the backup on a PC).
Other than that, you might need to wait on someone like kendong2 to spread his words of wisdom here, as he seems good at solving stuff like this.
Click to expand...
Click to collapse
Thanks for the advice, my heart started pounding very hard when you mentioned about the nandroid backup being backed up! Luckily, I done an SD card backup a few weeks ago and found the folder, phew.
Sorry for being a little foolish, but when you say do a fastboot recovery how is this done in the bootloader, i'll search google in the mean time. To format my sd card im going to have to get usb adapter I presume as you can't format the SD card from bootloader? Correct me if im wrong.
anarchyuk said:
For the phone not being detected in adb mode? what shows in device manager when its plugged in under universal serial bus?
try formatting the card using a linux live disc like gparted...
Click to expand...
Click to collapse
Thanks for the reply. Nothing comes up at all anymore, I can't see any changes when I plug in the device under recovery mode, and even when selecting the USB-MS mode, nothing is detected or shown on the USB devices list. However, when I first tried originally it came up with the device not recognised.
Got to get myself a SD USB adapter first to format the card.... so I'll give that a try.
Ok, got myself a USB adapter to format SD Card, i've put my backup of everying back on. I now understand about how to use the fastboot command via command prompt etc....
Where do I go from here? What commands to type etc.. I've looked at the options but cannot seem to use flashall command succesfully.
The device is listed when typing fastboot devices, so I take it that's one good thing for a start!
Again, thanks for any help with this.
Just another question does the SD card have to be formatted specially? Ie partitioned etc... perhaps this is why I can't get it mounted under the recovery options. Because I accidently done one of the partion options and from then on I had all the problems.....
I have rooted my phone using TGA_Gunnman's one-click method.....everything was great - I am pretty sure my phones everyday performance is better now as a result. Of course, all the awesome things I can do now that I have root, make the phone that much better!
Yesterday, after no mods or changes my SD card became nor recognized by the phone. I get an error that the "Mount Point is absent or incorrect. Please unplug USB and try again." Of course I have tried unplugging, restarting, fixing permissions, unrooting, putting in a different SD card, nothing...NO access to SD. I am able to access the SD card from a computer so pretty sure its not the card.
I have searched and searched and searched the forums...I have not found anyone having a similar problem.
Does anyone have any suggested fix....or am I destined to return this handset for a dif one?
Thanks for any and all help.
kstar
So, due to lack of response, I can only assume the phone is faulty, and I will be heading to t-mobile store today.
Or am I really that slow and it is totally obvious?
Sent from my SGH-T959 using XDA App
did you try restoring the phone to factory settings?
Thanks for the suggestion....but a factory reset did not fix the problem.
I got that EXACT same error yesterday while I was tinkering trying to rename the memory card on the computer and phone. I unmounted it and then it started giving me this error. I DID fix it though I'm not sure WHICH one of the things I did fixed it so I will list everything I did while trying to lol.
1. Remove the card from the phone as it is powered on. Wait a few seconds and re-insert it. See if problem persists.
2. Power down phone, remove memory card. Power back on (without the card). Insert the memory card. See if problem persists.
3. With the phone and card in, attempt to connect to a computer in all 3 modes (Storage, Media Player, etc). See if it still can't mount it after you disconnect from the computer.
4. (I think this may have fixed it but not sure). With the phone on and card in, go into setting-->Applications-->Development-->USB Debugging. CHECK the box "USB debugging". Now connect the phone to your computer. It will warn you its in debugging mode, click ok. Open the notification menu on top when its connected (the one that slides down from top) and MOUNT the memory card + phone memory. Your computer should now recognize 2 new drives. Phone memory and the memory card. After this, disconnect the phone and it SHOULD be able to find the memory card and mount it CORRECTLY, fixing your problem for good.
Let me know if all of these don't work and I'll think if I missed something that I may have done while trying to fix it. It's not your memory card or the phone itself. It's the software which bugged. I wouldn't recommend you return it at all since its not faulty. The new one will do the same.
PS: If NOTHING works and I can't think of the thing that fixed mine, there IS something that WILL fix it guaranteed though I only recommend you do that as a last resort. If you reflash the phone to a different ROM, it will be fixed since the bug is in the software. There is the stock T-Mobile ROM provided on these forums somewhere if you want the same ROM (or as close to it as possible) that came with the phone (aka...as you got it out the box). Otherwise, you can flash into some custom rom (likely having some improvements too). All up to you. Though I only would recommend this if you REALLY have no other option.
Thank you - none of those options helped. I am not able to see the phone memory either. In other words, even when I have it plugged in to the computer and tell it to mount memory to the computer, no drive shows up. So I am unable to access any storage on the phone.
Why would this software issue just show up out of no where? I have had the phone since day 1......
Thank you!!!
Hmm...I was able to see the phone memory at least. Are you sure your phone doesn't even detect the phone memory? Cause that is quite odd. I remember my phone did not detect ANY memory card all the while giving me that message but it DID find its phone memory and could use that. Idk. I played with my phone an a USB cable for half an hour panicked that I did something to my phone or memory card till it finally worked. Your issue MAY be different though. In either case, I don't seem to remember anything else I did with it (maybe combination of those things I was listing? idk). Furthermore your issue may be different, even if related so I suppose start looking into the flashing process. You will need to flash if you want to return it anyway is my guess. So might as well.
I suggest you start looking here:
http://forum.xda-developers.com/showthread.php?t=747335
It's all the Roms for the Vibrant up to date. You will need Clockwork recovery and Odin to flash. The list has the official Tmobile ROM that your phone was shipped with. You can try that. It will return it to FULL stock, making it returnable and very likely fixing it. But if you're feeling adventurous you can try the custom ROMs.
Thanks for all your help - I ended up returning it b/c I didn't have the time to deal with it and have now run into a new problem of apps not installing from the market. They actually install for the first five minutes after wiping the phone, but then the installing was unsuccessful. I got two different replacements today and a new sim card, spent half my afternoon on the phone with 611...still no apps.....
Edit: found the fix for inability to download apps
settings>applications>manage applications>menu>filter, all>download manage>clear data
Of course, on my third vibrant and this is the only one with the menu button lag......i will be patient.....
I just had exactly the same problem with my Galaxy S. The problem was, My internal phone memory was unmounted after flashing a new firmware. Once I mounted it, it worked.
Menu > Settings > SD Card and Phone Storage > Mount SD Card (under Internal SD Card)
This mounted both internal and external cards and I'm now good to go!!
I have this exact same error right now and nothing is working.
Also, I do not have the option of returning the phone because it was a private sale and i bought the phone off of someone. He has the receipt but I wonder what I can do since he paid for it under his credit card and its in his name?
tks }{Alienz}{,
I got this can not mount external sd card message and following your step 2, it`s working now! just to remember, step 2 is:
2. Power down phone, remove memory card. Power back on (without the card). Insert the memory card.
Regards,
Eric Fagundes
Samsung vibrant unrooted yet =]
I had the same problem and #2 worked for me as well. Thank you!
I have a similar problem. I flashed axura and since then when I plug in my phone It never gives me the option to mount my phone. Has anyone found a fix for this?
- took the longest time to fix this. anyone having the same problem. i fixed it by getting a samsung usb cord. for whatever reason my phone wouldnt realize it was connected to the computer without it
}{Alienz}{ said:
I got that EXACT same error yesterday while I was tinkering trying to rename the memory card on the computer and phone. I unmounted it and then it started giving me this error. I DID fix it though I'm not sure WHICH one of the things I did fixed it so I will list everything I did while trying to lol.
1. Remove the card from the phone as it is powered on. Wait a few seconds and re-insert it. See if problem persists.
2. Power down phone, remove memory card. Power back on (without the card). Insert the memory card. See if problem persists.
3. With the phone and card in, attempt to connect to a computer in all 3 modes (Storage, Media Player, etc). See if it still can't mount it after you disconnect from the computer.
4. (I think this may have fixed it but not sure). With the phone on and card in, go into setting-->Applications-->Development-->USB Debugging. CHECK the box "USB debugging". Now connect the phone to your computer. It will warn you its in debugging mode, click ok. Open the notification menu on top when its connected (the one that slides down from top) and MOUNT the memory card + phone memory. Your computer should now recognize 2 new drives. Phone memory and the memory card. After this, disconnect the phone and it SHOULD be able to find the memory card and mount it CORRECTLY, fixing your problem for good.
Let me know if all of these don't work and I'll think if I missed something that I may have done while trying to fix it. It's not your memory card or the phone itself. It's the software which bugged. I wouldn't recommend you return it at all since its not faulty. The new one will do the same.
PS: If NOTHING works and I can't think of the thing that fixed mine, there IS something that WILL fix it guaranteed though I only recommend you do that as a last resort. If you reflash the phone to a different ROM, it will be fixed since the bug is in the software. There is the stock T-Mobile ROM provided on these forums somewhere if you want the same ROM (or as close to it as possible) that came with the phone (aka...as you got it out the box). Otherwise, you can flash into some custom rom (likely having some improvements too). All up to you. Though I only would recommend this if you REALLY have no other option.
Click to expand...
Click to collapse
What i did was reformat fat32 again then did a battery pull an went an turned off debugging an turned it back on an pluged it back in to computer an it found it, it renamed dcim to DCIM caps..i copied all photos an audio back in to that an it found everything then just copie all the rest of the stuff on your card back to the card Im running MIUI revamped now an i like it. Hop that helps somone out
i find that the answer to most solutions is the top thread in this forum.
Odin + 512.pit + t959UVJFD.tar
go back to stock jfd build 2.1
I am hoping someone could answer this question since nobody has never asked before. I bought a Kingston 32GB micro sdhc card. The model number is SD-C02G made in Taiwan. When I popped in the card into the tablet, it says the card is damaged, formatting is needed. I tried to click on the format button and nothing happened. But, when I test the card on other devices (cell phone & camera & computer), it had no problems at all. No formatting or anything was needed. Does anyone have the same problem or know how to get this fixed?
I am running vegan tab 5.1.1 by the way.
Thanks a lot!
trojanhacker said:
I am hoping someone could answer this question since nobody has never asked before. I bought a Kingston 32GB micro sdhc card. The model number is SD-C02G made in Taiwan. When I popped in the card into the tablet, it says the card is damaged, formatting is needed. I tried to click on the format button and nothing happened. But, when I test the card on other devices (cell phone & camera & computer), it had no problems at all. No formatting or anything was needed. Does anyone have the same problem or know how to get this fixed?
I am running vegan tab 5.1.1 by the way.
Thanks a lot!
Click to expand...
Click to collapse
did you try to format using ur PC in Fat32?
nvm...problem is fixed now. i found out that the memory card was loose probably. Didnt come into full contact with all the pins. Thank you for your reply anyway.
I had the same issue with my new 16 gig card, I let the gtab format it, then rebooted with the card installed, have had no issues for 2 weeks now, card is full of movies and everything works like a champ!
Ok got my sandisk 32GB card from Amazon. I put it in the Gtab but couldn't format the card. Put it on my mac and saw it wasn't formatted at all so I formatted it. No go on the Gtab again... said I need to reformat but the Gtab wouldn't do it. I tried windows to format Fat32 with fast off but kept crashing during format (only showed 27Gb BTW). Searched around and came across windows based program from Panasonic/official micro sd standards site (sdformatter V3). Ran this program selecting all wipe options. The program took 5 days! Successfully finished this morning with correct fat32 so I thought all was well connected to both mac and windows I cant get files to transfer onto the card. I set up a couple media folders but once I start the file transfer it will give me error: improper disk ejection and still show folders. On windows I can get a few files to the card before I get ether "file is corrupt" or I can see that the transfer has stopped and I can see its lost connection between windows and SD card. Did I get a bad card or is there anything I can try here? BTW after that long and painful format Gtab could recognize the SD and I could see the folders I was able to make on the card.
Update:
Now a pop up window for fixing the card has come up on windows once I connected the card reader. I checked the 2 options "Auto fix file system errors" and "scan for and attempt recovery of bad sectors" has been running for 10min and progress bar is half way. hope it fix my problem!
kraftweksfit,
The 32 gig cards have worked back to the beginning as far as I have ever heard.
My opinion, but if it were my card I would return it and ask for one that is not defective.
When you get a good one, make sure it is formatted (on your PC) to FAT32. I also
have found the USB port and card slot are not plug and play like Windows. I
always change them while the G-Tablet is off to all it to search and find them on startup.
Rev
Thanks for that info. I had to shut everything down as my workday was over so now after those 2 windows fixes ran I'm just getting everything back up now at home. So Ive got multiple 2GB movie files to transfer. I still get the random "explorer is not responding" freeze issue on file transfers though. Should I just keep reformatting the card to see if it will fix the issue? Or give up on it and wipe and send it back?
trojan, I've got a question. have you tried putting more than 2 gb on the card? I can't seem to find a 32 gb version of the SD-C02G. Also have you done any speed tests on it?
kraftwerksfit said:
Ok got my sandisk 32GB card from Amazon. I put it in the Gtab but couldn't format the card. Put it on my mac and saw it wasn't formatted at all so I formatted it. No go on the Gtab again... said I need to reformat but the Gtab wouldn't do it. I tried windows to format Fat32 with fast off but kept crashing during format (only showed 27Gb BTW). Searched around and came across windows based program from Panasonic/official micro sd standards site (sdformatter V3). Ran this program selecting all wipe options. The program took 5 days! Successfully finished this morning with correct fat32 so I thought all was well connected to both mac and windows I cant get files to transfer onto the card. I set up a couple media folders but once I start the file transfer it will give me error: improper disk ejection and still show folders. On windows I can get a few files to the card before I get ether "file is corrupt" or I can see that the transfer has stopped and I can see its lost connection between windows and SD card. Did I get a bad card or is there anything I can try here? BTW after that long and painful format Gtab could recognize the SD and I could see the folders I was able to make on the card.
Update:
Now a pop up window for fixing the card has come up on windows once I connected the card reader. I checked the 2 options "Auto fix file system errors" and "scan for and attempt recovery of bad sectors" has been running for 10min and progress bar is half way. hope it fix my problem!
Click to expand...
Click to collapse
That Panasonic tool is a favorite over in headfi-org - I've been using the older version for years and it actually works on a Windows VM. We used to use it on our Cowon D2 to ensure that our SDHC cards were being read properly.
For v2, if you do a quick format it should not take that long.
roebeet said:
That Panasonic tool is a favorite over in headfi-org - I've been using the older version for years and it actually works on a Windows VM. We used to use it on our Cowon D2 to ensure that our SDHC cards were being read properly.
For v2, if you do a quick format it should not take that long.
Click to expand...
Click to collapse
So you think the card just needs to be reformatted again? If so I'll try the quick option. When that program took so long I thought for sure something was wrong. BTW all references to windows are on VM on my mac as well.
Should I be worried that my Gtab can't format the card? I'm on Vegan 5.1
thanks
UPDATE:So I ran the quick option of SDformat V3 with no problems, was able to transfer one 2GB movie no problem. I went to try to move more files and instantly the progress bar for transfer does not move, "more details" tab shows est. time calculating... so my guess is windows explorer lost connection with the card. also every time I eject the card/reader windows want to fix errors which I've already run so I think this card is dead!
Bad SanDisk is on it way back, after browsing amazon I came across a Kingston 32GB micro sd with adapter class 4 for 39.99 + shipping. I went for the store front offering for 41.99 + 9.98 shipping. Best price I can find for a quality card if anyone is looking for one. http://www.amazon.com/gp/product/B004QQKI0G
Folks,
I don't claim to be an expert on the microiSD card, but there are some things
that need to be said -- and if I don't get it all or get it right then other folks
need to jump in.
1. Care always need to be taken putting your microSD card in and out. Not
only is it small and fragile, but the slot is small as well. You sometimes may
have to use your fingernail or something else thin to ease it far enough in
against the spring to get it to "click" into place. Same thing in reverse for
removal.
2. YOU CANNOT JUST PLUG AND UNPLUG THE FULL SIZE USB STUFF IN ANDROID.
They are not "Plug and Play" like Windows. I don't know the final word, but on
the full size USB port -- when I put in a USB key -- I always shut down, plug it in,
then reboot.
The miniUSB you use to your PC is a little more flexible, but that's another
post for another time.
3. You can use the microSD for recovery, but you have to edit the recovery
command file to point to /SDCARD2. When you boot standard recovery, Android
checks the internal memory for a recovery/command and update.zip presence.
If it does not find them, the it looks for a microSD external card and if it finds it
then it checks for recovery/command and update.zip file there.
4. Different ROMS have different capabilities with regard to finding and using the
USB ports. You'll have to research that -- or maybe someone will fill in that
blank here.
I hope this helps. I know this is not all the info on /SDCARD2 -- but I hope it
get the discussion going to help those having problems.
Rev
Good Topic! May want to add mention that /SDCARD2 does not normally mount to your PC when the tablet is connected for file transfers (I've seen that question 3 or 4 times in the past few days). There are some apps that allow it but I've run into some serious issues with a couple of them up to and including corruption of the internal memory.
#2 - the large USB port... I'm not an expert on this either but I do have two flash drives that will not mount if they're inserted with the tablet off. They do work fine when inserted with it on. So there is at least some level of auto-detect and mount going on I'm just not sure to what degree. It is on the list for further study. I would definitely err on the side of caution on this one with regards to anything containing important data.
#3 could be expanded to include or link to a how to on making your own recovery/utility MicroSD (another thread?). This could really save some folks some time and anguish.
+1 placeholder
+2 placeholder.
I won't bump it again. Just want those who need this to have the opportunity to
read it.
Rev
If SDCARD2 does not mount to your PC, how do you get the PC to recognize it so that you can store media files from your PC? Thanks!
mebrat said:
If SDCARD2 does not mount to your PC, how do you get the PC to recognize it so that you can store media files from your PC? Thanks!
Click to expand...
Click to collapse
If I understand your question correctly, you must get a standard sd holder for your micro sd (usually comes with the micro, but not always), and then you need a card reader with a usb plug to go into your computer.
snarful,
Yes. In my case an adapter came with the microSD card and I have a card reader
on my PC -- so I'm good to go.
But if you are going to do much with the cards, it really helps and speeds things up.
Rev
So I rooted and flashed XtrSense, and thought it would be great if I had a large micro SD card. So I picked up a 32gb card off ebay. Now my first problem is I'm not sure if its a real 32gb or just a 8gb that someone hacked to make it show as 32gb, but thats beside the point for right now.
I've always had a problem when I plug my phone into my computer over usb, where if I move the cable just one bit, it disconnects then reconnects quickly then says that the device would preform faster in a USB 2 slot (all of mine are USB 2).
Unfortunately this happened when I was transferring music and when I unplugged from the computer it said my SD card had errors. I used the prompt to format it, and my card worked fine for a while.
Well that same scenario happened again last week and for some reason I decided to format it using Amon recovery. Now I'm afraid my SD card is corrupt because when I start my phone it says the card is blank or has an unrecognized filesystem. Whenever I try the format option the phone gives, it does nothing. Any ideas?
I can't help you with the formatting issue (try formatting FAT32 through windows?), but I have had the USB intermittent connection problem. Easily solved by using a standard usb cable or charger (not the modified one provided by HTC) and using a small stylus to bend the shorter of the two long sides of the plug slightly outward.
Thanks for the tip on the cord! I'll try that as soon as I find my cord.
And I can't format the card in windows because windows doesn't recognize that anything has been plugged in
And just for clarification you mean the bottom on this picture?
__________
\----------/
|_______|
^^^^^^^
Can you format it through a card reader? Also, can't you format it through the settings | storage settings menu?
Yes, the bottom where you have the carats. there's usually a seam right in the middle that is easily bent. don't bend too hard or far. just a fraction of a centimeter will tighten up the connection
__________
\----------/
|_______|
^^^^^^^
Going through settings and selecting format does nothing. I click the button and it still says its a blank or unsupported filesystem
jlab89 said:
Going through settings and selecting format does doing. I click the button and it still says its a blank or unsupported filesystem
Click to expand...
Click to collapse
if the phone reformatted it then it should be blank.
now mount it to the computer and put what you want on it
You did it wrong in amon_ra. Reformat in amon but this time set first two settings to zero and the remainder fat32. Hope this helps.
DINC¦CM7¦SLAYHER27
So I followed your response and wiped EXT on sd then partitioned it with both settings=0 but I still get the same error message: "sd blank or unsupported filesystem"
EDIT: So I tried to do it in command prompt and it said unrecognized disk label. So i tried to change it but whatever I type it says invalid token
Edit 2: And by command prompt I mean IO installed android adb and foolowed a guide online to try and format my SD card that way
You may try this step by step guide that helped me before: recover data from corrupted SD card
hope this helps.