Hey guys am on 2.2.0 and even on 2.1.3.x i have faced this issue..
my friend bought a OTG PENDRIVE i started cpying a fle from my phone to pendrive but in th middle of transfer it got failed and showed notification usb removed..
tried a couple of times but same thing ...
i faced this even in P.C..it keeps disconnecting.
welll next day i tried again but same thing..usb removed afta 1 mint or so..
though i just noticed copying file to internal storage was uninterrupted and everyhting went smooth ..i copied around 1.5 gb and no issue...
copying to external sdcard can b the reason?????
weird. is the pendrive faulty?? does it work on you PC?
i faced this even in P.C..it keeps disconnecting.
Click to expand...
Click to collapse
your phone connected to the pc or the pendrive?
trendchanger said:
Hey guys am on 2.2.0 and even on 2.1.3.x i have faced this issue..
my friend bought a OTG PENDRIVE i started cpying a fle from my phone to pendrive but in th middle of transfer it got failed and showed notification usb removed..
tried a couple of times but same thing ...
i faced this even in P.C..it keeps disconnecting.
welll next day i tried again but same thing..usb removed afta 1 mint or so..
though i just noticed copying file to internal storage was uninterrupted and everyhting went smooth ..i copied around 1.5 gb and no issue...
copying to external sdcard can b the reason?????
Click to expand...
Click to collapse
+1
I am also facing the same issue. It was there on OOS as well. Also, the phone keeps of disconnecting, while connect to the computer via USB.
Currently I am on MA's CM 12.1, stock kernel.
1)on connecting pc via USB...
Gets disconnected as u start copying huge number of files
2)otg Pendrive gets disconnected while copying data or writing data in it...
Related
I updated my x10 mini to 2.1 yesterday and now everytime i connect phone to PC
and click on Mount USB phone just restarts. Does anyone have the same issue?
although this is not a x10 mini thread, i experience the same problem (with my mini) after upgrade to 2.1. i wonder if it is not because you sync with "my phone explorer"... do you?
Android Commander
Use android commander to transfer files does not require putting into USB mount mode.
Or MyPhoneExplorer.
It used to do that back on the RF...014 firmware.
They seemed to like it so much, that they implemented it again!! lol!
*sent from my X10i
mine does it too. but it happens when i plug the usb cabel to the device so the software above won´t work..any solution?
When you connect phone to PC choose to "charge" after that choose "mount" no restarts
but it restarts just after i plug the cable into the device, i have no time to select one of these options
Have you tried connecting the phone with another computer, usb port or usb cable? If that doesn't work...
Have you tried connecting the cable without the sd card inside?
Try that, if it doesn't restart you know it's the sd card that's causing the problem. If you have an sd card reader (some laptops have them) put it in and copy your important files and format the sd card to fat32. You can also use the phone to format the card, but you will lose everything on the card.
Hope that helps.
thanks for your reply
but i had to flash my phone again and now i´m not having this problem anymore so far
Same thing happens to me too. Yesterday updated my X10 Mini Pro to 2.1, now the phone restarts, when mounted. I have tried on 2 computers (PC and laptop). Just now tried the suggestion to choose "Charge" and later "Mount" from status bar, seems to work
Actually, just now i remembered that this started happening not right after the update, but after i enabled Text-to-Speech or Speech-tp-Text or whatever it was. Will be trying to switch that off later.
for me the upgrade to 2.1 solved the problem...try to re-flash
Dentisst said:
When you connect phone to PC choose to "charge" after that choose "mount" no restarts
Click to expand...
Click to collapse
I use exactly the same workaround on my X10 mini pro. This bug started after the android 2.1 upgrade. I never had it before...
It happens only when I mount the SD on Win7 and not on Ubuntu Linux: Could it be a driver issue?
EDIT: btw the issue disappeared after i uninstalled the live wallpaper
Dentisst said:
When you connect phone to PC choose to "charge" after that choose "mount" no restarts
Click to expand...
Click to collapse
Thanks my problem is solved......CHEERS
Hi, i had same problem with reboot after mount USB so i tried to find solution. And in my case the soution was simple.
I have had set sound notification to SD card witch was save on S card..... Go to: Preferences>display and sound> SD card notification> "set OFF"
That solved my problem
PS: Sorry for my english
kindred7 said:
Have you tried connecting the phone with another computer, usb port or usb cable? If that doesn't work...
Have you tried connecting the cable without the sd card inside?
Try that, if it doesn't restart you know it's the sd card that's causing the problem. If you have an sd card reader (some laptops have them) put it in and copy your important files and format the sd card to fat32. You can also use the phone to format the card, but you will lose everything on the card.
Hope that helps.
Click to expand...
Click to collapse
im having a problem with my phone explorer...i reflashed my X10 to generic 2.1 in order to get the 2.3 firmware.
Now im busy syncing my phonebook from my laptop back to my X10 and it has somehow made a duplicate of all my contacts and is busy syncing that into my X10 now...how do i sort that out? i dont want every contact duplicated on my phonebook... pls advice
phone restarts when I mount usb pen drive to it!
My wt19i restarts some times when I mount pen drive. The mount buttun pressed and then screen turns black, then restarts. Please help me.
Try to move those apps which you use more frequently to PHONE STORAGE or kill their procces before you mount your USB...this helped me
Hello,
Stock ICS S3, It wont ask me if i want mount STORAGE once i plug the USB to PC.... It just directly start charging...
ideas?
Thanks!
rommark said:
Hello,
Stock ICS S3, It wont ask me if i want mount STORAGE once i plug the USB to PC.... It just directly start charging...
ideas?
Thanks!
Click to expand...
Click to collapse
There is no mount usb option in SGS3..it directly connects as MTP..
zoot1 said:
There is no mount usb option in SGS3..it directly connects as MTP..
Click to expand...
Click to collapse
I am on windows 8. how do I view the SG3 sd card files?
Thanks!!!
Use the popular SGS3 UMS App.
Ext SD Card reading is supported, you can't move files through internal sd card and Pc.
Use bluetooth for that.
I've had the same problem many times after changing and testing new ROM's.
You can restart your computer and phone - has worked for me before.
Change ROM - this has worked for me, seemed like a particular ROM didn't like my PC setup / drivers whatever and refused to connect!
Change cable - they don't last that long, I've had to replace 4-5 since my HTC Desire days - all that plugging and unplugging can bust them - they always still charged, but no PC connection.
Try a different USB port - You never know!
Uninstall the drivers on your PC for your S3 - reinstall - use the SDK drivers - or from KIES. I seen users report that the change between a ICS ROM and a JB ROM and vice versa can cause issues, not sure if applies to you.
Hi, I usually dont write, but I read a lot here.
about 2 weeks ago i bought my S3, and everything was great. about 2 days ago I bought a 32GB MicroSD card (Sandisk Ultra Mobile CL10)
and put it into the phone, when I try to connect it to the computer via the USB cable, the transfer rate is extremely slow!!!
It usually just freeze about the middle and just pop-out a message that "The File could not be copied", and its the same to every file I try (regardless the type/size etc).
the strange thing is that it does the same to the internal memory!
if I take out the the MicroSD and put it into a card-reader and into a the computer it works great and transfer rate is about 20Mb/s!
is there anything I can/should do?
I know that on my old Motorola I could plug it into the computer and the SD card was shown as a "Removable Disk" and I could just copy and paste, and the S3 is either shown by a Camera or a media device... is there a way to make it as a Removable Disk?
I'm with a stock rom is that's matter.
hope I could get your help.
Thanks.
Xebu said:
Hi, I usually dont write, but I read a lot here.
about 2 weeks ago i bought my S3, and everything was great. about 2 days ago I bought a 32GB MicroSD card (Sandisk Ultra Mobile CL10)
and put it into the phone, when I try to connect it to the computer via the USB cable, the transfer rate is extremely slow!!!
It usually just freeze about the middle and just pop-out a message that "The File could not be copied", and its the same to every file I try (regardless the type/size etc).
the strange thing is that it does the same to the internal memory!
if I take out the the MicroSD and put it into a card-reader and into a the computer it works great and transfer rate is about 20Mb/s!
is there anything I can/should do?
I know that on my old Motorola I could plug it into the computer and the SD card was shown as a "Removable Disk" and I could just copy and paste, and the S3 is either shown by a Camera or a media device... is there a way to make it as a Removable Disk?
I'm with a stock rom is that's matter.
hope I could get your help.
Thanks.
Click to expand...
Click to collapse
Sound like a problem i had when i got my 32gb card. for me it turned out that i had to change the usb port as the one i was using decided to be a usb1.0 port, changed port, installed drivers for a different port and it fixed my issue, dunno if it will work for you but worth a try.
also try formatting your card.
joey jojo said:
Sound like a problem i had when i got my 32gb card. for me it turned out that i had to change the usb port as the one i was using decided to be a usb1.0 port, changed port, installed drivers for a different port and it fixed my issue, dunno if it will work for you but worth a try.
also try formatting your card.
Click to expand...
Click to collapse
I just tried on another computer, the problem didn't occur but the transfer rate is still VERY slow...
I format the card within the phone and when I looked on the properties of the MicroSD card, under File System is written "generic hierarchical" - is that normal? is there anyway i could format it to NTFS or even FAT32? the phone will still recogsize it if i do?
Xebu said:
I just tried on another computer, the problem didn't occur but the transfer rate is still VERY slow...
I format the card within the phone and when I looked on the properties of the MicroSD card, under File System is written "generic hierarchical" - is that normal? is there anyway i could format it to NTFS or even FAT32? the phone will still recogsize it if i do?
Click to expand...
Click to collapse
Thats what mine says too, not sure which format it uses by default.
I have heard that you can format to ntfs or fat32, but i havent tried it, too scared to damage it and loose 32gb from my phone accidently, lol (ive done this before. ) but search and see.
Hi guys,
i have a little problem here. suddenly my USB port wasnt charging and not recognized in computer also.
i have replaced the USB flex cable and can charge again.
but, another problem came up.
it cannot detected in computer in any way, even in CWM.
another problem is charging mode is always in USB mode never in AC mode, even i plug in into a wall socket.
then i took out the flex cable again and inspect that the new cable is rev.1.x (i forgot) and the broken one is rev 2.2
maybe is that the cause?
okay, another problem is my sdcard is acting weird.
i have dropbox folder in /sdcard/Android/data/com.dropbox.android which take up places about 3terrabytes (yeah 3TB)
i have screenshot to show inside dropbox folder with ftp client.
i know i must format this internal sdcard but i cant connect them to PC.
i try wipe from airdroid, androidlost, AVG mobilation to format sdcard, the result is nothing.
i also trying to format from inside the phone setting and it doesnt work either.
any suggestion until i get the new usb flex cable rev 2.2 (im curious that this version is working fine)
any help will be apreciated
thanks
fik
can anyone help?
Hi, i have a problem like i said in topic title.
After connecting my phone by USB to PC and transfering some files to SD card and then disconnecting, i'm getting error "Application not installed" on some apps installed on SD card (for example Adobe Reader, Temple Run 2). The only way i figured out to solve this problem is restarting my phone... I don't want to restart my phone nearly every day, just because i needed to connect by USB cable to transfer some files :crying:
Is there any way to solve this problem?
Phone: Alcatel One Touch Idol 6030X, Android 4.1.1 - official, not rooted.
is it happening after every time you disconnect USB? if you wait some time (30-60 seconds for example) after disconnecting USB, can you run the sdcard installed apps?
Maybe your device is trying to remount its external card while you are trying to run the apps, and it's hanging on it
is it happening after every time you disconnect USB?
Click to expand...
Click to collapse
Yes.
if you wait some time (30-60 seconds for example) after disconnecting USB, can you run the sdcard installed apps?
Click to expand...
Click to collapse
No, for example before write this post i waited around 5 minutes and it's still the same problem.
Maybe your device is trying to remount its external card while you are trying to run the apps, and it's hanging on it
Click to expand...
Click to collapse
I remember one thing from my last LG Swift phone. When I disconnected cable i think always popped up in notification bar some text like "preparing SD card" or something like that. On this phone there is nothing like that happening.
Little refresh, anybody have some ideas?