Hello friends good afternoon, I have mini LG G2 D625
which briqueo me trying to unlock the bootloader , the end discovered that he had no So what I did was connect to PC without battery and let down until vol +
It detects as APX , but it did me no good because I did not and could start
take you where a friend and what was desbriquearlo iso JTAG but not under the motherboard and works but to arm the phone does not start properly
take you where a friend and what was desbriquearlo iso JTAG but not under the motherboard and works but to arm the phone does not start properly
and reading out there say it is the way to flash the phones with Tegra chip or that there is a connection between the bootloader
PC mode only detects apx
Related
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
ivko1982 said:
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
Click to expand...
Click to collapse
you can find the answer to unbrick the device here
http://www.forum.tabletworldstore.co...ch-tablet.html
Is there any possibility to review this tablet back to life ?There is no boot, no starting picture , nothing .hen i connect it to PC via USB and i hold the power on button the PC say unknowing device .I have tried put there drivers for RK2818 - bad drivers or something ..Is there any other possibility to review this device with something like JTAG (RX,TX connection ) ?Or i need just find the right driver for USB ?
Hello friends good afternoon, I have mini LG G2 D625
which briqueo me trying to unlock the bootloader , the end discovered that he had no So what I did was connect to PC without battery and let down until vol +
It detects as APX , but it did me no good because I did not and could start
take you where a friend and what was desbriquearlo iso JTAG but not under the motherboard and works but to arm the phone does not start properly
take you where a friend and what was desbriquearlo iso JTAG but not under the motherboard and works but to arm the phone does not start properly
and reading out there say it is the way to flash the phones with Tegra chip or that there is a connection between the bootloader
PC mode only detects apx
Boot into download mode and refresh firmware using kdz. May have to factory reset in the process tho.
Enviado de meu ASUS_T00J usando Tapatalk
Hi everyone,
My dad's friend has a problem with his phone and dad asked me if I can help him. Right now I only know that he had "LG Security Error". However when I got the phone it didn't react on anything, so I'm unable to turn it on or charge a battery (I have also a second battery, neither of them works). When I plugged it to a PC it showed "OMAP4430". I've never had experience with LG before (only Xperia phones), but after searching I found this (2n option), which didn't work with my device, but this (1st option) worked flawlessly. I managed to get into FASTBOOT mode (phone is listed with "fastboot devices", ADB not) - OMAP FASTBOOT DEVICE. I noticed that it disconnects itself after 1-2 minutes and the proccess needs to be repeated. The phone still isn't showing anything on screen. After few hours of searching I didn't find anything, except that after doing procedure with Vol+ button entered, Windows recognized my phone (I could get only twice and the screen was still blank):
Code:
LGE Mobile Composite USB Device
LGE Mobile USB Serial Port (COM9)
LGE Mobile USB Modem
LGMobile Support Tool was doing something, but in the end it didn't detect anything, also I checked out LG Flash Tool 2014, phone information showed that it was in emergency mode. Screenshots
At this point I'm guessing that the phone is hard bricked as it couldn't go to S/W mode, download mode or show anything on screen etc. I haven't found any tut about unbricking in fastboot. Is there anything I can to at this stage?
Thank you in advance!
The com port driver is the only one needed for unbricking. Provided, that the phone is already in D/L mode, otherwise communication will first be done with the ADB driver.
I had the situation, that the phone wasn't recognized by the ADB and Fastboot drivers(with a custom rom installed), and under Win8.1 and Ten Fastboot generally doesn't work. But only the L9 is affected by this.
But if someone managed to clear the whole internal flash, with bootloader and baseband, the phone is economical junk now. Though re-flashing via JTAG is possible. While some geeks may own one of these Octopus adapters privately, even if you know such a person, he should be an LG user, too, as support for each brand or individual model has to be bought separately. Or simply invest around 100€ or $100. That is the price of a brand new phone with the L9s capabilities and a stable(!) Lollipop or Marshmallow installed.
Hello everyone,
Recently I tried to flash my Freer X9 Tablet (aka U89) with Android 7. In the beginning the SP flash tool was not able to detect the tablet, maybe because of a driver clash. Then the flash process started very very slow and stopped in the middle for some unknown reason. I had to exit the SP flash tool.
After that, the tablet seems to be hard bricked. It does not start, it does not respond at all. On the other hand, when I connect it to my laptop, the laptop is able to detect it as Mediatek USB VCOM device.
I came across some threads which mention Meta mode which can make the device start working again but for it to work, I must physically open the device to disconnect the battery since the battery in this device is not removable. I do not really want to do that fearing that the tablet could be damaged while I open it (locks, paint and stuff).
Can it be unbricked in any way without physically opening it? Any help is highly appreciated.
Thank you in advance.
Solved!
Well, I waited for a day and guess what, the battery got discharged. I don't know how. I put the SP tool to download mode (clicked the download button). Connected the tablet to the laptop while keeping the volume up key pressed. I did not release the volume key for 10 seconds even after connecting it to the laptop.
And... boom! it started to flash!!! the tablet works now!