Hello friends good afternoon, I have mini LG G2 D625
which briqueo me trying to unlock the bootloader , the end discovered that he had no So what I did was connect to PC without battery and let down until vol +
It detects as APX , but it did me no good because I did not and could start
take you where a friend and what was desbriquearlo iso JTAG but not under the motherboard and works but to arm the phone does not start properly
take you where a friend and what was desbriquearlo iso JTAG but not under the motherboard and works but to arm the phone does not start properly
and reading out there say it is the way to flash the phones with Tegra chip or that there is a connection between the bootloader
PC mode only detects apx
Boot into download mode and refresh firmware using kdz. May have to factory reset in the process tho.
Enviado de meu ASUS_T00J usando Tapatalk
Related
Hi.
Need help with my phone. It has dead boot I think. Can't enter CWM,or dwn mode.
Is there any JTAG support for LG P920?
Or,can I use Octopus Suite for repairing the dead boot of my phone?
Can you give me more details? "Dead boot"
Sent from my GT-S5660 using xda premium
The phone does not power on.
Can't enter CWM,or download mode.
When I connect it to computer just a device "Omap4430" connects and disconnects permanently.
Whatever I do,the device keeps connecting and disconn. again and again.
anyone have pinout for jtag for this phone?
UP
looking for a jtag for LG P920
arsen4oo said:
Hi.
Need help with my phone. It has dead boot I think. Can't enter CWM,or dwn mode.
Is there any JTAG support for LG P920?
Or,can I use Octopus Suite for repairing the dead boot of my phone?
Click to expand...
Click to collapse
Just a question
how did you do brick your phone ?
accidentally erase boot/recovery partitions?
or x-loader / u-boot areas ?
arsen4oo said:
The phone does not power on.
Can't enter CWM,or download mode.
When I connect it to computer just a device "Omap4430" connects and disconnects permanently.
Whatever I do,the device keeps connecting and disconn. again and again.
Click to expand...
Click to collapse
so you can't even enter S/W download mode ?
I have the same problem, maybe even a bit worse!
P920 bricked after a failed flash of CM9 due to battery running out.
Phone now completely dead.
No omap4430 when connected to my PC, all attempts to put the phone into download mode fail, so omap4boot, LGFlashtool etc do not work.
I've tested the battery in my other working P920 and it's fine so it's not a power issue.
Can anyone help?
techtechnique said:
I have the same problem, maybe even a bit worse!
P920 bricked after a failed flash of CM9 due to battery running out.
Phone now completely dead.
No omap4430 when connected to my PC, all attempts to put the phone into download mode fail, so omap4boot, LGFlashtool etc do not work.
I've tested the battery in my other working P920 and it's fine so it's not a power issue.
Can anyone help?
Click to expand...
Click to collapse
Since your phone ran out power in the middle of flashing a ROM then all of the partitions the ROM overwrites with new data are only partially flashed and still contain data from your previously installed ROM. In the process of only partially flashing the partitions due to your phone losing power the partitions have been corrupted (Including boot partition and recovery partitions), which is why your phone isn't able to boot, access recovery mode, download mode, or be recognized by any computer program. At this point unfortunately it seems you have hard bricked your phone and JTAG is really your only option to attempt to revive your phone. However, I have heard the Optimus 3D's JTAG input isn't connected so it isn't functional. You should try bringing it into a repair shop and see what they can do for your phone.
Sent from my SCH-I535 using xda premium
Hello friends good afternoon, I have mini LG G2 D625
which briqueo me trying to unlock the bootloader , the end discovered that he had no So what I did was connect to PC without battery and let down until vol +
It detects as APX , but it did me no good because I did not and could start
take you where a friend and what was desbriquearlo iso JTAG but not under the motherboard and works but to arm the phone does not start properly
take you where a friend and what was desbriquearlo iso JTAG but not under the motherboard and works but to arm the phone does not start properly
and reading out there say it is the way to flash the phones with Tegra chip or that there is a connection between the bootloader
PC mode only detects apx
hello guys , need very much your all help to get up ( resurect?) my phone
i was flashing this ROM https://forum.xda-developers.com/ma...nt/rom-emui-8-0-kangvip-mate-10-lite-t3784834
and installed their kernel and tuning camera p20 pro , installation was finished, then i wiped cache and clicked button Reboot , and ....................... nothing till now, Black screen , buttoms not respons , was trying clicking and still nothing
Black screen
buttons dosent responds , volume up and down , and power
i trying with connecting cabble , TWRP , recovery and other stuffs.. nothing
any suggests ?
xydonis said:
hello guys , need very much your all help to get up ( resurect?) my phone
i was flashing this ROM https://forum.xda-developers.com/ma...nt/rom-emui-8-0-kangvip-mate-10-lite-t3784834
and installed their kernel and tuning camera p20 pro , installation was finished, then i wiped cache and clicked button Reboot , and ....................... nothing till now, Black screen , buttoms not respons , was trying clicking and still nothing
Black screen
buttons dosent responds , volume up and down , and power
i trying with connecting cabble , TWRP , recovery and other stuffs.. nothing
any suggests ?
Click to expand...
Click to collapse
Does pc recognize phone?
Fastboot is working?
If pc recognize phone as usb-ser there is no fix.....
Enviado de meu BLA-L29 usando o Tapatalk
ChaseRxx said:
Does pc recognize phone?
Fastboot is working?
If pc recognize phone as usb-ser there is no fix.....
Enviado de meu BLA-L29 usando o Tapatalk
Click to expand...
Click to collapse
Fastboot not,
when i connect phone to pc there is only sound of windows ( alert of new device , mass storage ) but there is no any other windows information , MY PC dosent see phone and SD Card
phone completly dead ? what shall i do ?
xydonis said:
Fastboot not,
when i connect phone to pc there is only sound of windows ( alert of new device , mass storage ) but there is no any other windows information , MY PC dosent see phone and SD Card
phone completly dead ? what shall i do ?
Click to expand...
Click to collapse
How does the device appear in Device Manager
Enviado de meu BLA-L29 usando o Tapatalk
ChaseRxx said:
How does the device appear in Device Manager
Enviado de meu BLA-L29 usando o Tapatalk
Click to expand...
Click to collapse
not showing in device manager , its like ghost mode , only sound from Windows playing Device Connect Sound thats all
Hello.
I have the same problem on my Mate 10 Lite, after flashing firmware i have a black screen and when i connect phone to pc it shows me "fastboot 2.0" and i can working with fastboot.
Reset of the phone is working too because when is connected to computer and i`m pushing power+vol up windows is showing reconnected but when reset is finished still is in fastboot mode but i don`t see it on screen because is black.
Can i do something with that ? Maybe huawei service is needed? My phone is dead and still has warranty - i think…..
wojtekml said:
Hello.
I have the same problem on my Mate 10 Lite, after flashing firmware i have a black screen and when i connect phone to pc it shows me "fastboot 2.0" and i can working with fastboot.
Reset of the phone is working too because when is connected to computer and i`m pushing power+vol up windows is showing reconnected but when reset is finished still is in fastboot mode but i don`t see it on screen because is black.
Can i do something with that ? Maybe huawei service is needed? My phone is dead and still has warranty - i think…..
Click to expand...
Click to collapse
I listened about dc phoenix, but it cost money for flash firmware with and without bootloader unlocked, it cost 15 euros for 72 hours after the initial flashing, maybe it works or no, i don't know exactly but good luck if you test it!
Ok phone back to me from huawei client center and has replaced battery with screen and mainboard….. has a new imei and its a new mate 10 lite.
At this time i have only rooted system and trwp recovery installed.
And i`m waiting for roms to flash by twrp.
Best regards
Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down Button, The Phone turned off and is not turning on Not Even the Fastboot Logo, Its Bricked. (Here are some additional Points Which you Should Know, 1. I checked the ports on my Computer and It was Showing Qualcomm HS-USB QDLoader 9008 So I think the phone is in EDL mode. 2. I tried to Flash Mi A3 Stock Firmware using Miflash and It was Showing Error "Cannot receive hello Packet") The Phone is my Daily Driver and If anyone can, Please help me Fix this.
Even I got the same issue after downloading the latest Android 11, then got rectified the Mobile through the nearest service center.
Globally many people experienced the same issue.
Now it is ok !
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
elprfesor said:
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
Click to expand...
Click to collapse
could you explain it more?
I also dead briked my phone after install a11 and used qfil to flash some stuff in edl mode using test points,
I recommend using the right qualcomm driver 32 or 64 bits like your OS and also reboot after install driver,
I don't recommend open the back painel bcs even u doing it right it don't close well after bcs lose stickiness,
If u can just go to a service, they can manage with this better then u.
Same here. Even opened the back cover to touch the EDL points.
Tried getting out of that mode by flashing to stock ROM using the Mi Flash Tool as I'm getting a weird error, `Input string was not in the correct format`. even when using the very same input as I've seen on a YouTube Tutorial & I had also tried it out on the very same version of Flash Tool (and still got the error)
Hi,
My BLA-L09 (Mate 10 Pro) is bricked due to a bad firmware update. I have a black screen, I cannot enter any mode (recovery, fastboot). But when I plug/unplug the phone, Windows detects it. I've downloaded (and paid some credits) DC-Phoenix. Now the phone is detected as a USB COM 1.0 device since I've installed the driver as explained here https://www.dc-unlocker.com/flash-bricked-huawei-phones-in-huawei-1-mode. With Dc-Phoenix, I can boot into fastboot mode thanks to testpoint mode. But my problem is that everytime I leave fastboot mode, the phone screen turn to black (like if it's shut down).
I guess my board software is broken, so I would lilke to re-install a fresh board software (via testpoint fastboot mode using Dc-Phoenix), but unfortunatelly, I cannot find a place to download board software for BLA-L09.
Anyone knows where we can find board software for BLA-L09?
Is there another way to unbrick my phone? Considering I can go in fastboot mode, I hope there is still a chance!
iBen68 said:
Hi,
My BLA-L09 (Mate 10 Pro) is bricked due to a bad firmware update. I have a black screen, I cannot enter any mode (recovery, fastboot). But when I plug/unplug the phone, Windows detects it. I've downloaded (and paid some credits) DC-Phoenix. Now the phone is detected as a USB COM 1.0 device since I've installed the driver as explained here https://www.dc-unlocker.com/flash-bricked-huawei-phones-in-huawei-1-mode. With Dc-Phoenix, I can boot into fastboot mode thanks to testpoint mode. But my problem is that everytime I leave fastboot mode, the phone screen turn to black (like if it's shut down).
I guess my board software is broken, so I would lilke to re-install a fresh board software (via testpoint fastboot mode using Dc-Phoenix), but unfortunatelly, I cannot find a place to download board software for BLA-L09.
Anyone knows where we can find board software for BLA-L09?
Is there another way to unbrick my phone? Considering I can go in fastboot mode, I hope there is still a chance!
Click to expand...
Click to collapse
Take a look at my GDrive Folder
Btw latest DC provides software testmode and hard brick recovery...