Ultimate shield (front, back, side) - OnePlus X Q&A, Help & Troubleshooting

Hello,
I've read in this forum about fragility of OnePlus X screen (and body). This fact really scares me.
So (before I buy it) I looked for screen protections and I found Ultimate Shield (a user in this forum was talking about it). Did you try it? Is it a good product?
There is also the body protection (back and side of the phone): what do you think about it? Is it a good alternative for covers? Or you can easily use them together?
Thank you very much!
Edit: Sorry, wrong section

I can't find opx there
edit: as the matter of fact, i would go for dbrand since it allows you to customise it too

AlexVendettA said:
I can't find opx there
edit: as the matter of fact, i would go for dbrand since it allows you to customise it too
Click to expand...
Click to collapse
http://www.ultimateshield.co.uk/oneplus-x-screen-protector/

ckret said:
http://www.ultimateshield.co.uk/oneplus-x-screen-protector/
Click to expand...
Click to collapse
ok, seems fine but I'm not sure it will be edge to edge(its not even specified) as a screen protector(seen couple of scratchtests and other stuff) seems legit if you are going to give it a shot, let us know!!

I have it installed, both front and back, also the sides. It is like plastic covers, but no so rigid.
It will protect against scratches and fully covers back and screen, but you are not protected against a phone fall and consecuent screen crack.
By other way it is not so flat like others protectors but it gives the phone a gummy touch so it makes sticky, so you will have less chance of drop the phone, less if you use the lateral covers.
Also if you put on a really flat surface like glass the phone sticks so will not fall by vibration on a call.
It is very clear, they say 99%, and will not notice it but the surface touch. It is thin and will not change the phone design so this is important. The phone will not be as nice as the direct glass sight as seen out of the box, but the protector also is shinny and nice.
I don't know if there are images por videos of 1+x examples but you can find examples like iPhones.
Finally, I'm using it and I like it.
Enviado desde mi ONE E1003 mediante Tapatalk

I've just seen this. It is the "tempered glass" version of the Ultimate Shield, but is only for OnePlus 1 and 2.
I thought all Ultimate Shield films were tempered glass.
I'm scared of screen fragility, should I look for another tempered glass?

For me tempered is the best, but there is not one that sure covers all. By other hand, ultimate makes the phone less slippery.
Enviado desde mi ONE E1003 mediante Tapatalk

tochom said:
Finally, I'm using it and I like it.
Click to expand...
Click to collapse
tochom said:
For me tempered is the best,
Click to expand...
Click to collapse
I'm confused

paco_fhey said:
I'm confused
Click to expand...
Click to collapse
For screen protection, it is better the template glass, but if you have read other posts, you will know that most of tempered glass do not adjust to screen due it is curved. Ultimate shield adjust well and covers almost al the screen, so visually for me is better. I use it and I like it.
Maybe the best thing is try both solutions and then make your own decission.
Enviado desde mi ONE E1003 mediante Tapatalk
---------- Post added at 07:09 PM ---------- Previous post was at 07:06 PM ----------
paco_fhey said:
I'm confused
Click to expand...
Click to collapse
I'm always talking about ultimate film, not their tempered glass. Up to now I think that ultimate does not have tempered glass for 1+X
Just to be clear ...
Enviado desde mi ONE E1003 mediante Tapatalk

tochom said:
.... you will know that most of tempered glass do not adjust to screen due it is curved. Ultimate shield adjust well and covers almost al the screen, so visually for me is better.
Click to expand...
Click to collapse
So does that mean it covers the edges too and not just the flat area of the screen?

Yep
Enviado desde mi ONE E1003 mediante Tapatalk
---------- Post added at 10:03 PM ---------- Previous post was at 10:01 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi ONE E1003 mediante Tapatalk
---------- Post added at 10:06 PM ---------- Previous post was at 10:03 PM ----------
Not completely but it covers almost all
Enviado desde mi ONE E1003 mediante Tapatalk

Related

Motorola G4 Plus Tempered Glass Screen Protector Full Screen??

Hi all, what screens is everyone getting for the Moto G4 plus, please share images, videos and reviews.
We recommend you to try Pleson TGSP for MOTO G4 Plus. See attached image and check difference between ours and our competitor's
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And we are starting a giveaway list for MOTO G TGSP and case.
---------- Post added at 05:18 AM ---------- Previous post was at 05:14 AM ----------
Jerseymase54 said:
Hi all, what screens is everyone getting for the Moto G4 plus, please share images, videos and reviews.
Click to expand...
Click to collapse
Try Pleson TGSP for MOTO G Plus 2016. Exclusive design, full coverage and best cutouts for button, cam, mic, proximity sensor and speaker.
Pleson said:
We recommend you to try Pleson TGSP for MOTO G4 Plus. See attached image and check difference between ours and our competitor's
And we are starting a giveaway list for MOTO G TGSP and case.
---------- Post added at 05:18 AM ---------- Previous post was at 05:14 AM ----------
Try Pleson TGSP for MOTO G Plus 2016. Exclusive design, full coverage and best cutouts for button, cam, mic, proximity sensor and speaker.
Click to expand...
Click to collapse
And where can I order it?
Mehrsau said:
And where can I order it?
Click to expand...
Click to collapse
Well, order it on amazon. Here is the link:http://www.amazon.com/dp/B01FUFKT96
Pleson said:
Well, order it on amazon. Here is the link:http://www.amazon.com/dp/B01FUFKT96
Click to expand...
Click to collapse
Would be amazing it you'd put it on the German Amazon! I can't order it from there
Mehrsau said:
Would be amazing it you'd put it on the German Amazon! I can't order it from there
Click to expand...
Click to collapse
We are sorry for that.
Need one in India?..
Any plan on India Launch?
Fit for Moto G4 too?
Re the Plesan link provided:
Will this also fit the Moto 4G phone (not plus) that Amazon is offering?
Pleson said:
We are sorry for that.
Click to expand...
Click to collapse
Is it possible to get that screen protector inCanada
Is there a TPU case that you recommend with this TGSP? My G3 TGSP did not work with the Tundia TPU case as it went all the way to the edge of the screen and was pushed up by the case
Just bought 2- hope they work as advertised.
Disgustip8ed said:
Just bought 2- hope they work as advertised.
Click to expand...
Click to collapse
They do. I have one on my phone. Not because of this thread, it's just the one i happened to buy. Fits like a glove and you barely notice it's there because it's full screen (edge to edge).
tCizler said:
They do. I have one on my phone. Not because of this thread, it's just the one i happened to buy. Fits like a glove and you barely notice it's there because it's full screen (edge to edge).
Click to expand...
Click to collapse
Which case did you buy? I'm looking for a case that's screen protector friendly.
zeeBomb said:
Which case did you buy? I'm looking for a case that's screen protector friendly.
Click to expand...
Click to collapse
I don't have a case. We were refering to the Pleson tempered glass screen protector. I don't care for cases. Good luck
vestibule5 said:
Is there a TPU case that you recommend with this TGSP? My G3 TGSP did not work with the Tundia TPU case as it went all the way to the edge of the screen and was pushed up by the case
Click to expand...
Click to collapse
I purchased the "Cimo [Matte] Premium Slim Protective Cover" from Amazon and fits perfect with the Pleson glass screen protector.
I hope we see a few more companies make cases soon, I've been waiting a while for a good quality case, and I still can't seem to find one.
at my near store i got tempered @40rs inr
FYI, Pleason is a good company, they offer a lifetime guarantee.
Of course my new G4+ glass cracked by the fingerprint sensor as it was going on, as it wasnt alligned right.
I'm sure I'll get a replacement as soon as I send them a message on amazon..
I went with the poetic case... obviously really bulky but hey...
Sent from my Moto G (4) using XDA-Developers mobile app

HTC U11 Case thread

Figured I would start a case thread as I keep looking online every night. Nothing looking promising yet. If you find something drop it below!
Spigen is open for preorders. On Amazon
Praying Supcase fully supports the U11 this time around... I've been lost without the Unicorn Beetle on my HTC 10
Will be there dot view case?
Looks like it comes with a clear case if you buy from HTC directly. Probably crap, but better than nothing as you decide on a "real" case to order when available.
tkoreaper said:
Praying Supcase fully supports the U11 this time around... I've been lost without the Unicorn Beetle on my HTC 10
Click to expand...
Click to collapse
What's wrong with Unicorn Beetle Pro for the 10?..
Kisakuku said:
What's wrong with Unicorn Beetle Pro for the 10?..
Click to expand...
Click to collapse
Nothing. I don't have a need for something that big, but that's all they ever made for the HTC 10 which is why I said 'fully support' because I particularly like the Hybrid case and some like the regular Unicorn Beetle.
mefistoreyon said:
Will be there dot view case?
Click to expand...
Click to collapse
I hope so I want
Sent from my Pixel XL using Tapatalk
mefistoreyon said:
Will be there dot view case?
Click to expand...
Click to collapse
oneandroidnut said:
I hope so I want
Click to expand...
Click to collapse
No, there's only two official cases: transparent plastic one that comes with the phone and a leather folio / flip cover case.
"HTC U11™ Protective Leather Case - White" is available for preorder on their website
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kisakuku said:
No, there's only two official cases: transparent plastic one that comes with the phone and a leather folio / flip cover case.
Click to expand...
Click to collapse
That sucks. The HTC Klik case is the best case I ever owned, and the IceView. I didn't think I would like it but it grows on you and has been the best protection for my screen, do not need a screen protector with it.
https://beebom.com/best-htc-u11-cases-covers/
It's all about minimalism for my choice. That TopAce Ultra Thin Transparent is right up my alley.
What I want to know is why I can't get Spigen before June 18th?? What I am supposed to do from 9th until 18th?
Sent from my Pixel XL using Tapatalk
Lock-N-Load said:
It's all about minimalism for my choice. That TopAce Ultra Thin Transparent is right up my alley.
Click to expand...
Click to collapse
Whats the difference with Spigen? Thought that was a very nice quality case as well?
On Aliexpress there are also a lot of cases and TPU gel covers for 2 euro.
Is that a big difference in quality?
---------- Post added at 08:17 PM ---------- Previous post was at 08:05 PM ----------
oneandroidnut said:
What I want to know is why I can't get Spigen before June 18th?? What I am supposed to do from 9th until 18th?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Use the one which comes with the U11
oneandroidnut said:
What I want to know is why I can't get Spigen before June 18th?? What I am supposed to do from 9th until 18th?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
It comes with a case. a clear case, snap on.
Anybody have any idea if Supcase will release anything for the U11?
Seem to be a few more cases for the U11 on the Amazon US site.
This one is the best so far for me.
https://www.amazon.com/gp/aw/d/B072...ds=HTC+U11&dpPl=1&dpID=41B0j8Q9goL&ref=plSrch
Lock-N-Load said:
It comes with a case. a clear case, snap on.
Click to expand...
Click to collapse
I don't want to use it. Not enough protective
Sent from my Pixel XL using Tapatalk
Tech21 makes very good cases, real good protection from dropping, see YouTube. Not for U11 yet.

Anyone knows of any Metal framed bumper case?

If anyone does, please let me know.. Not looking for the ones with the plastic backing on.. pure metal bumper only...
you can find it on Aliexpress type magnetic bumper
gd6noob said:
If anyone does, please let me know.. Not looking for the ones with the plastic backing on.. pure metal bumper only...
Click to expand...
Click to collapse
What about this one...
https://m.ebay.com/itm/Magnetic-Ads...1e:m:mwwsl6LihKG5QobJapxpqDQ&var=631547439893
Enviado desde mi CLT-L29 mediante Tapatalk
Crazyhat said:
What about this one...
https://m.ebay.com/itm/Magnetic-Ads...1e:m:mwwsl6LihKG5QobJapxpqDQ&var=631547439893
Enviado desde mi CLT-L29 mediante Tapatalk
Click to expand...
Click to collapse
Thanks for the help but that one still have the backing...
Im looking for more like this but metal frame
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think I found one on Amazon.com
https://www.amazon.com/DAYJOY-Alumi...&sr=8-18&keywords=huawei+p20+pro+metal+bumper
This one looks nice
Luphie Case
http://www.luphiecase.com/luphie-aluminum-metal-bumper-frame-for-huawei-p20-p20-pro.html
gd6noob said:
Thanks for the help but that one still have the backing...
Im looking for more like this but metal frame
Click to expand...
Click to collapse
Did you end up getting one? If yes can you post some pictures?
Don't buy these cheap "magnetic frames". The magnets around make the compass unusable and the steel frame lowers GPS signal. Like really much.
Bought this one https://www.wish.com/product/5b3b41dec56f8902645428fa
And there are GPS signals with and without frame.
My phone looks kinda ok..
The case while it looks likes, doesnt have the lip to stop the front and back side of the phone from touching the table. I got a tempered glass for the front, this one was fairly think so pressing the home button you can really feel the thinkness. I got the slickwrap naked series for the back, didnt want to hide the colorful Twilight color and it does come with the camera glass cover also, so it does provide some cover from scratches.
All in all, I enjoy this setup. I have provided links.
Luphie Case
http://www.luphiecase.com/luphie-aluminum-metal-bumper-frame-for-huawei-p20-p20-pro.html
PThink Full Cover Tempered Glass Screen Protector for Huawei P20 Pro (Black)
https://www.amazon.ca/gp/product/B07DN65RHQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
NAKED WRAP FOR HUAWEI P20 PRO
https://www.slickwraps.com/naked-wrap-for-huawei-p20-pro.html
Ereniemis said:
Don't buy these cheap "magnetic frames". The magnets around make the compass unusable and the steel frame lowers GPS signal. Like really much.
Bought this one https://www.wish.com/product/5b3b41dec56f8902645428fa
And there are GPS signals with and without frame.
Click to expand...
Click to collapse
You know I bought one from Aliexpress and I've noticed that wifi signal and network were weaker when using it, never tried.thw.GPS though. Too bad since it's nice and thin
Inviato dal mio EVA-L09 utilizzando Tapatalk

Official OnePlus6T 3D Tempered Glass Screen Protector UNBOXING

Dear all, I've just received the official OnePlus6T 3D Tempered Glass Screen Protector. Here are some of the photos to share with you guys!
The official protector do have black lines on the long edges, after applying, I think it only cover around 1px screen on each side.
Photos shoot from my OP3.
1. Package
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. I bought two
3. For OnePlus6T
4. What's inside
5. Step 2 is interesting, it actually asked you to use the original TPU case to assist in applying the screen protector
6. Perfect fit
7. The moment just after applying the protector, I've spent quite some time to get rid of all bubbles using the tools provided.
8. Finally !
Showing on oneplus.com now! Thanks for the post.
Thanks , might have to order soon.
Why are there so much bubbles under it?
JelleZon said:
Why are there so much bubbles under it?
Click to expand...
Click to collapse
yes, so many bubbles after applying, need to use the cloth to rub the bubbles away.
Does it have that oily hazing effect that the 5t 3D protectors had?
Slightly off topic but I have one tiny bubble on the stock screen protector. What's the best way to remove it? Didn't see the need to post a brand new thread to have it answered.
Poke a needle to pop it? Any other easy way?
does the black boarder cover any part of the screen?
psp888 said:
does the black boarder cover any part of the screen?
Click to expand...
Click to collapse
1 px width on each side OP said in his initial post.
I dont understand the merit of those black borders on four sides, can't they make full transparent one.
Typically black boarders are to mask the protector not completely adhering on the edges
prabhat775 said:
I dont understand the merit of those back borders on four sides, can't they make full transparent one.
Click to expand...
Click to collapse
Sent from my ONEPLUS A6013 using Tapatalk
I almost ordered the official one.....I think I may go with the TMobile version glass(no black border)....it's $40 but I can get it today instead of 1.5 weeks for the $20(plus 10shipping)
So I am just considering it as same day delivery surcharge. Ha......I have to make reasoning somehow.
I went and looked at the Purearc at TMobile and walked away. It's the same exact width as the crappy ones on Amazon that don't quite reach the edge of the screen. Not worth it in my opinion
jasons1004 said:
I almost ordered the official one.....I think I may go with the TMobile version glass(no black border)....it's $40 but I can get it today instead of 1.5 weeks for the $20(plus 10shipping)
So I am just considering it as same day delivery surcharge. Ha......I have to make reasoning somehow.
Click to expand...
Click to collapse
Sent from my ONEPLUS A6013 using Tapatalk
What does 1 px mean?
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
I don't get the company that makes the phone still can't get the right dimensions to avoid coverage of the screen.
crzycrkr said:
I went and looked at the Purearc at TMobile and walked away. It's the same exact width as the crappy ones on Amazon that don't quite reach the edge of the screen. Not worth it in my opinion
Sent from my ONEPLUS A6013 using Tapatalk
Click to expand...
Click to collapse
I hear you but it looks ok in this video.
I have not made my mind up yet....
I had a black border one for the s8 and it was ok but the black border got annoying to me
https://youtu.be/xuoaknZhlGw
crzycrkr said:
Typically black boarders are to mask the protector not completely adhering on the edges
Click to expand...
Click to collapse
That is very stupid of makers to think, even a full transparent one can do the job when the screen has borders itself so it will overlap. Even accurate Size with screen having black borders in tempered glass would have worked as it would just overlap the screen borders but they tend to make a bit shorter which instead add to the already border making the screen shorter from each side. When a mm is making a difference in screen to body ratio to a device now this is really stupid to think a customer will satisfy with that. I will certainly get a case and screen protector as none of my device ever slipped from my hand ever.,?
Did anyone try the official oneplus 3d tempered glass protector with Spigen liquid air case?
TheROMGuy said:
Does it have that oily hazing effect that the 5t 3D protectors had?
Click to expand...
Click to collapse
Sorry, I haven't used the 5t 3D protectors. So, I can't compare.
ivanegg said:
Sorry, I haven't used the 5t 3D protectors. So, I can't compare.
Click to expand...
Click to collapse
When I was running my 3D protector on my 5t it looked like it had permanent grease from a face after being in a heated conversation.
Nosferatu. said:
Slightly off topic but I have one tiny bubble on the stock screen protector. What's the best way to remove it? Didn't see the need to post a brand new thread to have it answered.
Poke a needle to pop it? Any other easy way?
Click to expand...
Click to collapse
I just used the provided cloth and tool trying to rub the bubbles to the edge.

Slider scratches

Hi!
today I find out some scratches under the slider, after 2 weeks of using my Mix 3. Does anyone have the same problem? I use the original phone case. Maybe you've seen somewhere the protective film for front camera (under slider)?
Photos (it was really hard to take good photos): https://imgur.com/a/ypenTWb
:crying:
gertyn said:
Hi!
today I find out some scratches under the slider, after 2 weeks of using my Mix 3. Does anyone have the same problem? I use the original phone case. Maybe you've seen somewhere the protective film for front camera (under slider)?
Photos (it was really hard to take good photos): https://imgur.com/a/ypenTWb
:crying:
Click to expand...
Click to collapse
Felling need to have care to the size of dust come inside the slider....easy to scratch IMO
I have a really deep one ? after 2 weeks how can we found a protector
---------- Post added at 01:24 PM ---------- Previous post was at 01:23 PM ----------
gertyn said:
Hi!
today I find out some scratches under the slider, after 2 weeks of using my Mix 3. Does anyone have the same problem? I use the original phone case. Maybe you've seen somewhere the protective film for front camera (under slider)?
Photos (it was really hard to take good photos): https://imgur.com/a/ypenTWb
:crying:
Click to expand...
Click to collapse
I have a really deep one ? after 2 weeks how can we found a protector
I have the same problem. I'm waiting an answer of aliexpress to send it back.
---------- Post added at 10:39 PM ---------- Previous post was at 10:36 PM ----------
Here are the images:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Using my Mix3 as a daily for the last 2 months without any case, ive gotten no scratches on the camera slider part. But did get some minor scratches and a very small chip on the screen (not noticeable)
I've also had it for 2 weeks honestly I think it's just part of the phone
God those scratches look bad. I've only had my phone a couple days, so I want to protect as much as possible, has anything been found yet to protect the front camera? And with the scratches, does it look like it's caused by some mechanical part inside, or could it be like a piece of sand getting trapped?
Mine got scratched too... I looked for a protector with no success...
Since I'm getting my mix 3 today, I wanted to ask if it's not possible to leave the original slide on it? Would not they be stable enough?
I bought a all aluminium with glass back case that's magnetic, well the front bezel scratched my slider front by the sensors. The case feels nice but kinda slippery so if you plan on getting this case file down the back of the front bezel on the top and file all the way across and it no longer with make contact. Cases are limited for this mix 3 and gearbest has the biggest selection. Nilliken anti explosion screen protector is pretty good and prob your best bet.
I have my mi mix 3 too since around 2 weeks with zero scratches. Maybe just be careful and don't use it in "dirty" areas. With a mechanism like a slider this can happen easily. I did not found any protection glass for the slider only so far.

Categories

Resources