hello guys i have a problem my friend asked me to update thiere i9100g
and i downloaded the correct tar file.
but now i wanna go to download mode..i cant
the phone is working properly with 2.3.6 i just wanna boot to download mode
also i checked i cant even go to recovery mode
is this a corrupted kernel or what ??
Did you try usb jig?
So the device is working but you can't get to download mode?
Sent from the little guy
Yes the phone is working
Thank god its already rooted !!
I did use the cwm app to boot to download mode but i still have no idea why i couldn't boot using the 3 btn methode
Envoyé depuis mon GT-I9100 avec Tapatalk
Achraf AOUAD said:
Yes the phone is working
Thank god its already rooted !!
I did use the cwm app to boot to download mode but i still have no idea why i couldn't boot using the 3 btn methode
Envoyé depuis mon GT-I9100 avec Tapatalk
Click to expand...
Click to collapse
pressing power button + home button + vol down for 7 seconds doesn't get you to download mode?
Sure?
get Mobile Odin from the store and flash away.
I must say, that's some weird sh$t tho.
Sent from the little guy
I use to own one that does not ve the 3 button combo gotta use jig for download mode. After rooting I can use button combo but when I revert to stock to sell it back to status quo. Anyway this occurs more in i9000 than S2
Sent from my GT-I9100 using xda premium
ndmuni said:
to sell it back to status quo.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=KjUygwbI8rY&feature=youtube_gdata_player
"noob ok...lazy noob not ok"
ndmuni said:
I use to own one that does not ve the 3 button combo gotta use jig for download mode. After rooting I can use button combo but when I revert to stock to sell it back to status quo. Anyway this occurs more in i9000 than S2
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
....hum......errr....yeah, OK.
Sent from the little guy
How to unlock Huawei MediaPad 7 Lite locked after "too many patterns attemts"
One of my friends have a Huawei MediaPad 7 Lite S7-931u. Recently his son tried few pattern attempts & It began to ask google account to unlock saying "Too many pattern attempts"
But it is not possible as it doesn't connect to Wifi or mobile network in this status!
Its ICS unrooted one & he doesn't know whether debugging enabled or not & no recoveries installed..
We both tied to upgrade it with official update from Huawei(by copying "dload" to SDcard). But instead of upgrading it restarts normally to the above screen asking to sign in to google account to unlock.
so the tablet became totally useless.
Is there a way to Hardreset/Install a new ROM or any other method to make this work?
jhha said:
One of my friends have a Huawei MediaPad 7 Lite S7-931u. Recently his son tried few pattern attempts & It began to ask google account to unlock saying "Too many pattern attempts"
But it is not possible as it doesn't connect to Wifi or mobile network in this status!
Its ICS unrooted one & he doesn't know whether debugging enabled or not & no recoveries installed..
We both tied to upgrade it with official update from Huawei(by copying "dload" to SDcard). But instead of upgrading it restarts normally to the above screen asking to sign in to google account to unlock.
so the tablet became totally useless.
Is there a way to Hardreset/Install a new ROM or any other method to make this work?
Click to expand...
Click to collapse
what i have learned for updating is, to extract the update.app and unlmt.cfg to your sd card root.
then while the mediapad 7 lite turned off, simultaneously press power key and volume down, once you see the bootscreen huawei mediapad 7 lite continue to press volume down key, til you see the android icon, release the volume key down and while the gear is moving press one more time the volume down key. it will reboot for about 2 to 5 minutes and it will be upgraded or reflashed, because there is no update from their website, the same update ICS 4.0.3. to factory reset it, you can press power and volume down key simultaneously and once you feel it vibrates, continue pressing the volume up key. your media pad 7 lite will be factory reset again.
good luck and i hope this helps. you
First of all: while device is off press "power" and "left" together... after vibration, release "power", but keep pressing "left".
If this was done right, the "fastboot" loader comes up.
When you got to this point, you could be hleped further.
Greets Gunnar
mediapad 7 lite force upgrade
I had the same problem with my tab and i have solved it.
jhha you are doing the right method just missing out a few steps maybe
Click to expand...
Click to collapse
Now try these steps-
download the device software from the huawei website (go to huaweidevice.com ==>select mediapad 7 lite from smartphones list ==>click on software tab ) according to your device
Extract the files to your computer and read the manual given in the downloaded zip file "CAREFULLY"
Keep in find that the SD card must hav atleast 2Gb free space after the dload files have been put into it
Make sure your sd card's format is FAT (you can do that by formatting the sd card on your pc and changing the format there)
Don't worry about the optional files(as they are optional)
Just read the manual and follow the above steps and you are done
Cant reset
GunnarWeibrink said:
First of all: while device is off press "power" and "left" together... after vibration, release "power", but keep pressing "left".
If this was done right, the "fastboot" loader comes up.
When you got to this point, you could be hleped further.
Greets Gunnar
Click to expand...
Click to collapse
Hello,
I tried it and now the android icon appears but it only restart after that,
I've fixed my problem this way:
1. turn off tablet
2. press and hold power and left key simultaneously
3. once you see the logo of huawei, release left key and immediately press right key continously till you see the android icon and the gear moving around
4. continue pressing volume up key until it reboots
5. once it reboots, you will notice that it will ask for your email,so it is on factory default settings now
Please ignore post. Sorry for the mess.
need step for flashing tablet S7-302u in my country is Claro Ecuador.. Need drivers of is it tablet.
sorry my bad english.
Regards.
GeorgeEcuador
GeorgeEcuador said:
need step for flashing tablet S7-302u in my country is Claro Ecuador.. Need drivers of is it tablet.
sorry my bad english.
Regards.
GeorgeEcuador
Click to expand...
Click to collapse
hello george,
i am not very good on mediapad 7 lite, but i will try my best to help you,
go to their website here. on their "search download by keyword", type S7-302U and click submit, it will lead you to your firmware download. download the firmware and be careful to follow the steps on flashing it. methods are on this thread. just follow the clear steps for you.
good luck and hope this helps you.
hard reret done by tecceljjr
:good:
to start excuse my English
but use google
good eh seen that there is nothing to do a factory reset
for this tablet s7-931w
in fact the brand firmware bug
ok the procedure is as follows
press the two volume buttons up and down
followed pwr
vibrate when pwr button release
and leave the other buttons are held
then appears the android with gears
hold the volume button up and let down the Volume Down
wait ask your new account and user data
spanish:
para empezar disculpen mi ingles
pero uso google
bueno eh visto que no hay nada para hacer un restablecimiento de fabrica
para esta tablet s7-931w
de hecho el firmware marca error
ok el procedure es el siguiente
press los 2 botones volumen arriba y abajo
seguido del pwr
en el momento que vibre soltar boton de pwr
y dejar los otros botones oprimidos
en ese momento aparece el android con engranes
soltar el boton de volumen arriba y dejar oprimido el de volumen abajo
esperar pida tu nueva cuenta y datos de user
S
Dear friends,
This is the way you can reset s7-931u. i did it twice.
1. power off your tab
2. press the three buttons (power + volume up + volume down.)
3. release the power button when you see the logo and keep pressing the two bouttons till you see the gear.
4. release the volume up without releasing the volume down.
Wait till you see a yellow bar under the gear then you can release it.
wait till the display says OK and thats it
Best Regards.
unlock mediapad
you go also try flashing it using sp flash tool
---------- Post added at 12:35 PM ---------- Previous post was at 12:28 PM ----------
kwjsuraweera said:
Hello,
I tried it and now the android icon appears but it only restart after that,
Click to expand...
Click to collapse
yeah that method might not work because that requires a custom mod usually cmw to be installed
try force upgrading instead.i have given the steps above
thanks thanks 1000000000
good :highfive::highfive::highfive::highfive::laugh::laugh::laugh::laugh::laugh:
mazen_al_ahmar said:
Dear friends,
This is the way you can reset s7-931u. i did it twice.
1. power off your tab
2. press the three buttons (power + volume up + volume down.)
3. release the power button when you see the logo and keep pressing the two bouttons till you see the gear.
4. release the volume up without releasing the volume down.
Wait till you see a yellow bar under the gear then you can release it.
wait till the display says OK and thats it
Best Regards.
Click to expand...
Click to collapse
Thanks
Confirmed.
This Hard-Reset work. Only need to charge battery more 20%.
No need re-flash firmware. Only make Hard-Reset with up steps and device will be reseted.
regards Svetil
svetli said:
Thanks
Confirmed.
This Hard-Reset work. Only need to charge battery more 20%.
No need re-flash firmware. Only make Hard-Reset with up steps and device will be reseted.
regards Svetil
Click to expand...
Click to collapse
You welcome anytime.
Deodexing firmware Huawei MediaPad 7 Lite
How to deodex firmware or individual application files (apk odex)?
Thanks advance for your reply.
Hi.
How can i upgrade again to MM if i returned to L to b180?
I don't see any update in OTA...
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
@wilu85 You can always force flash the Stock Marshmallow update(latest is B371) by the three button combo method.
Put UPDATE.APP in dload folder of your external sdcard.
Press and hold Vol UP + Vol DOWN + Power button the update process will start.
But keep in mind that your device should not be rooted in order to use this method, if your device is rooted, you have to follow a bit different steps.
Hi,
I just flashed twrp following the instrustions from a thread on here at the following link.
https://forum.xda-developers.com/lg-k7/how-to/t-mobile-lg-k7-thread-t3481844
Now when I try to boot into recovery by holding the buttons together to install su, it just boots up how it normally would.
Ive tried every possible combination of buttons to hold, I even tried booting to recovery from the command line by typing
adb reboot recovery
which it does reboot but to a screen with the android laying down opened with an explanation mark with in a triangle and underneath the total image it says no command Does anyone have any ideas of what im doing wrong or suggestions
any help would be much appreciated thank you!
Fields46391 said:
Hi,
I just flashed twrp following the instrustions from a thread on here at the following link.
https://forum.xda-developers.com/lg-k7/how-to/t-mobile-lg-k7-thread-t3481844
Now when I try to boot into recovery by holding the buttons together to install su, it just boots up how it normally would.
Ive tried every possible combination of buttons to hold, I even tried booting to recovery from the command line by typing
adb reboot recovery
which it does reboot but to a screen with the android laying down opened with an explanation mark with in a triangle and underneath the total image it says no command Does anyone have any ideas of what im doing wrong or suggestions
any help would be much appreciated thank you!
Click to expand...
Click to collapse
I've had the same problem, except If I input adb reboot recovery I actually get into the recovery. Have you tried flashing with the TWRP app?
EDIT: I have your solution. Reflash TWRP 3.1.0.0 using the TWRP app, turn off your phone. Holding Volume Down, hold down the Power button until you see the LG screen, then press Power again. Select Yes on the screen that appears, then Yes again. You will be taken to TWRP.
Top Feel said:
I've had the same problem, except If I input adb reboot recovery I actually get into the recovery. Have you tried flashing with the TWRP app?
EDIT: I have your solution. Reflash TWRP 3.1.0.0 using the TWRP app, turn off your phone. Holding Volume Down, hold down the Power button until you see the LG screen, then press Power again. Select Yes on the screen that appears, then Yes again. You will be taken to TWRP.
Click to expand...
Click to collapse
Hi,
Thanks for the response, however I did actually figure it out later the night that I posted this. I just ended up typing adb help and read through the commands and after a little playing around did adb reboot recovery, but I would get the read explanation mark. So then I rebooted into the bootloader typed fastboot boot twrp-image-3.image which got me in then I installed the SuperSU zip then from the bootloader I reflashed twrp rebooted finished Installing SuperSU then did adb reboot recovery and it brought twrp right up. So that took care of the red explanation mark. Though I still cant bring up recovery by using the button combination method, but adb reboot recovery works just fine. As far as I can tell I am rooted, however this is my first time doing this so im not too sure what all I can do.
Nesesito ayuda con mi lg_k330 no entra a modo descargar le he hecho de todo el telefono me detine las aplicaciones y nesesito hacerle la rom alguien me ayudaria con este problema ya que lo reseteo de fabrica y aun continua deteniendo la aplicaciones.
Hello.
I would need to restore my tablet in the indicated title, but I can not start it in recovery mode because it has only the physical buttons home and power (missing the volume bar).
I did not find anything on the Qilive website. Thanks to those who can help me
Help
Inviato dal mio HTC 10 utilizzando Tapatalk