Hello devs.
Can any one please reply me. My friend has purchased 2nd hand One Plus X E1003 phone. Which is stuck on FRP lock. I tried many think found on internet, but can't really work any of the method found.
its USB debugging is off. in fact developer mode is not enabled only. so can't fastboot also. when i use the command "fastboot -w" in command prompt, it says its not unlock. By this means OEM unlocking also is not enable in developer mode.
Now my queries are :-
Q 1. Is there any way to goto setting and enable all those option ?
Q 2. Is there any way to enable those features through ADB..? ( when i do adb, it won't show in listed devices as USB debugging is OFF ).
Q 3 . Is there any way to bypass this FRP lock specific to one plus x E1003 ?
Help needed urgently please..
Thanks
my one plus x stop working after flashing wrong firmware
http://forum.xda-developers.com/showthread.php?t=3272108
Try this maybe it helps
Related
Hey guys , anyone have a way to enable usb debugging via fastboot ?
Flashing something may do it ?
Leonardo_f said:
Hey guys , anyone have a way to enable usb debugging via fastboot ?
Flashing something may do it ?
Click to expand...
Click to collapse
i also need to find out because i cant even get into my phone due to bootloop issues...i bought my HTC MyTouch 4G from someone & been trying to fix my bootloop, every forum says to make sure "usb debugging" is enabled but i have no idea if it is or if it isnt
also when i use "adb devices" in cmd nothing shows up under list of devices...i just hope there is a command in adb or fastboot to enable/disable usb debugging
GarciaGotti said:
i also need to find out because i cant even get into my phone due to bootloop issues...i bought my HTC MyTouch 4G from someone & been trying to fix my bootloop, every forum says to make sure "usb debugging" is enabled but i have no idea if it is or if it isnt
also when i use "adb devices" in cmd nothing shows up under list of devices...i just hope there is a command in adb or fastboot to enable/disable usb debugging
Click to expand...
Click to collapse
I don't know whether you can enable USB debugging through fastboot ... i'll leave that to the experts.
However you can see your devices when connected to a PC in fastboot mode!
just run ...
fastboot devices
khajoor said:
However you can see your devices when connected to a PC in fastboot mode!
just run ...
fastboot devices
Click to expand...
Click to collapse
yeah i got that part, but when i try to flash or write anything to the device using fastboot i get nothing but errors so im guessing usb debugging must not be enabled
I'm sorry to say, you cannot enable USB Debugging through fastboot.
Hit the thanks button if i helped answer your question
Those errors have nothing to do with USB debugging. Your bootloader might not be unlocked so the flashing commands aren't working, or you're using wrong commands. USB debugging is at the ROM level and is for enabling adb while booted into the ROM. At the bootloader level, only fastboot commands work if the bootloader is unlocked. adb does not work. You need a custom recovery like CWM/TWRP for adb to work, and this recovery has to be flashed via 'fastboot flash recovery <recovery name>.img' on an unlocked bootloader.
Sent from my Nexus 7 using xda premium
Hello,
I'm also interested on this topic. My screen is broken, but the phone is working. I can boot and I feel the phone working and recognising my finger to unlock. However, because I'm stupid and I didn't have the "USB debugging ON" I can't access my files via ADB or any recovery software.
However, I can boot on fastboot and I see my device on "fastboot devides". Can I do something to access my files from there? I don't know... maybe unlock bootloader and flash any kind of TRWP with full adb or something like that.
THanks ¡
lotuxete said:
Hello,
I'm also interested on this topic. My screen is broken, but the phone is working. I can boot and I feel the phone working and recognising my finger to unlock. However, because I'm stupid and I didn't have the "USB debugging ON" I can't access my files via ADB or any recovery software.
However, I can boot on fastboot and I see my device on "fastboot devides". Can I do something to access my files from there? I don't know... maybe unlock bootloader and flash any kind of TRWP with full adb or something like that.
THanks ¡
Click to expand...
Click to collapse
As its name implies, Fastboot operates on device's bootloader and not on device's Android files as ADB does.
BTW: You always can access the user-data stored in Android's file system if USB-MTP mode got enabled on Android device.
jwoegerbauer said:
As its name implies, Fastboot operates on device's bootloader and not on device's Android files as ADB does.
BTW: You always can access the user-data stored in Android's file system if USB-MTP mode got enabled on Android device.
Click to expand...
Click to collapse
True, I can see my Xiaomi on "Windows Explorer", but it's an empty folder because I can't select MTP mode instead of "only charge" mode that it's launched by default.
What if I flash a TWRP recovery (I'll need to open bootloader first) and then from TRWP I try adb?
It must be a solution... if profesional people can do it so we do.
Thanks.
Hey all,
So Ive tried to unlock my bootloader but its not working, ive followed the steps from this site to unlock it but its stuck on the unlock bootloader screen. I have two options to choose from yes or no I click yes but it doesnt work, yet I click no and it takes me back to choose from fastboot, recovery and normal. My phone is a Alcatel Pixi 4.
I have enabled developer mode enabled usb debugging. I also have confirmed the RSA fingerprint for the computer. Also I have enabled OEM unlock in dev settings. This is what my cmd prompt window loooks like. I will also take a photo of my alcatel frozen on bootloader screen.
C:\Users\Dan\AppData\Local\Android\android-sdk\platform-tools>adb devices
List of devices attached
5HQGTCEQCAVS7TTS device
C:\Users\Dan\AppData\Local\Android\android-sdk\platform-tools>adb reboot-bootloader
C:\Users\Dan\AppData\Local\Android\android-sdk\platform-tools>fastboot oem unlock
...
This is what my phone looks like that im stuck on.
https://s11.postimg.org/8e2cjxooj/IM...129_172555.jpg
does anyone know why this is happening or know how to fix?
Issue has been solved as the bootloader is unlocked this process is not necessary.
OEM unlocking and USB Debugging enabled.
ADB never finds the phone in my windows 10 install no matter what drivers I force it to use. - Tried USB 2 and 3.
Fastboot does find it if I manually start it in fastboot mode, but it can't do anything to it
Fails to write when doing oem unlock
Just sits there if I tell it to write the recovery image.
Phone functions fine, I just want root and a 3rd party rom to be rid of any built in spyware.
Any ideas? any way to root it without flashing then I can just have the twrp app flash it?
Nevermind, found a way around it. This dialpad command made it work
Personmans said:
Hope this will help someone with trouble getting ADB/Fastboot to work. I assume you have a similar environment to me: Windows 10, with working ADB drivers on another device (LG G4 in my case)
Set up LeMax2 in developer mode and enable USB debugging as usual.
Plug in usb and dial *#*#76937#*#* check the box that says "Enable AT Port"
The device should immediately give you the approval message for USB debugging.
Note: This will not stick after a reboot.
Once I had this working, I did an adb reboot recovery, but fastboot still did not work. With the device connected and at the stock recovery screen, I had to open device manager, delete the LeMax device, and allow it to detect again. Finally it appeared in fastboot devices and I was able to flash recovery.
Click to expand...
Click to collapse
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
int211 said:
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
Click to expand...
Click to collapse
How to enter DIAG Mode and backup IMEI using QPST - Xiaomi Firmware
If you’re looking for a ways on how to enter DIAG Mode and restore / backup IMEI on Xiaomi smartphone here’s a complete guide. Below you’ll find few working methods on how to boot your device in DIAG mode and backup IMEI with Qualcomm Product Support Tools.Advertisement Entering DIAG Mode and...
xiaomifirmware.com
or
*#*#717717#*#*
or
*#*#426#*#*
or
use terminal method (google it)
or youtube
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjmmb7B6eDyAhWJG-wKHXbtBVIQwqsBegQIBhAB&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D8ZzQPwD7bnE&usg=AOvVaw2rqhhONfY3ZJhbDcDfglYU
please leave a lik or"thanks" button if a method work and tell update on which one worked
I tryed now this way but with no unlock bootloader have failure, I forgot to say the bootloader is locked, its hard
int211 said:
I tryed now this way but with no unlock bootloader have failure, I forgot to say the bootloader is locked, its hard
Click to expand...
Click to collapse
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
flairepathos.info said:
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
Click to expand...
Click to collapse
That's not a proper unlock bootloader..it is safe unlock bootloader using unlock tools from xiaomi. If you unlock the bootloader to CMD it's a chance to brick. I think the proper to unlock is xiaomi tools
akoaypinoy said:
That's not a proper unlock bootloader..it is safe unlock bootloader using unlock tools from xiaomi. If you unlock the bootloader to CMD it's a chance to brick. I think the proper to unlock is xiaomi tools
Click to expand...
Click to collapse
Both are safe but through fastboot, xiaomi wouldnt know that your mi acccount is linked to an unlocked device
flairepathos.info said:
Both are safe but through fastboot, xiaomi wouldnt know that your mi acccount is linked to an unlocked device
Click to expand...
Click to collapse
Yup. There's a chance if using CMD authenticated issue mi acc
akoaypinoy said:
Yup. There's a chance if using CMD authenticated issue mi acc
Click to expand...
Click to collapse
Well mi unlock tools will be your option to go for them
flairepathos.info said:
Youve tried unlocking from developer options?
NOTE: I AM NOT IN ANYWAY RESPONSIBLE FOR YOU BRICKING OR DAMAGING YOUR DEVICE, I WILL NOT BE HELD LIABLE FOR YOUR ACTIONS
Steps to unlock the bootloader Xiaomi Redmi Note 10
download and install adb and fastboot tools on pc,
open the folder where you installed adb fastboot tools
go to your phone
Unlock your phone and open the Settings menu.
Go to settings, very bottom system or device info open it
Tap build number several times andl do what must be done to enable developer option
Go to Settings--> System -> Developer Options. You will see a list of special options.
Find the following option: “OEM unlocking. Allow the bootloader to be unlocked”.
Tap on the toggle to enable OEM unlocking.
Enable USB debugging as well in the developer settings
A prompt will come up on your phone and choose always allow this Pc to connect and accept
Options
1
On your Pc ,Go to where you installed adb and fastboot "where the files and app are"
shift + right click empty area and open cmd or powershell here
Type adb reboot bootloader and Hit Enter
or
2
Press and hold the power button. Tap on Power off to turn off the phone.
Connect your phone to your computer using a USB cable.
then
Open CMD/Powershell on your computer, and enter the following command: fastboot devices
If the terminal returns something, it means the computer is successfully communicating with the phone.
Run the unlocking command: fastboot flashing unlock (if this doesnt work google fastboot unlocking commands and try the ones they have there)
The screen of the phone will give you two options once you run the unlocking command. Choose Unlock the bootloader using volume buttons.
Press the Power button to confirm your selection.
your bootloader is now unlocked happy rooting
Click to expand...
Click to collapse
At first, tks for all.
I tried to root with your informations but always get the same information, they say I don't have permition to do anything else.
"FAILED (remote: 'Token Verify Failed, Reboot the device')
in fastboot: error: Command failed
in ADB token error still the same.
Some other Idea to try help will be appreciated
Sorry my bad english.
int211 said:
At first, tks for all.
I tried to root with your informations but always get the same information, they say I don't have permition to do anything else.
"FAILED (remote: 'Token Verify Failed, Reboot the device')
in fastboot: error: Command failed
in ADB token error still the same.
Some other Idea to try help will be appreciated
Sorry my bad english.
Click to expand...
Click to collapse
You must unlock bootloader first
Does uypur phone show the authorization popup when you connect for adb and have you allowed always allow this device?
What are you all talking about in this thread?
There is NO WAY to initially unlock the bootloader without MI account, phoning home and waiting 167+hours.
PERIOD. let that sink in.
int211 said:
Pleas guys, is there a way to put this device in DIAG MODE or a rom modified to get root without MI account?
Click to expand...
Click to collapse
Whatever you want to do after that, requires this step before. There is no "root without MI account".
i'm trying to root my J320v but i am unable to flash the boot or recovery images. I have debug mode on, usb debugging enabled, OEM unlock enabled, the official Samsung USB drivers installed. Odin can detect the device but cannot write to it. I'm guessing the bootloader is still locked but from everything i can find the OEM unlock is supposed to disable that.
I'd like to install android 12 on this device so I can use it for app development, at the bare minimum android 10+ so i have access to scoped storage.
USB cable issue. Also turn off FRP lock by removing your google account on ur J3.
Also enable OEM unlock
Verizon / AT&T devices are known as they have locked bootloaders