Weird SIM Card Working/Not working - Sprint LG G3

I have my rooted and bumped LG G3, on ZV4 bootloader with TWRP 3.0.0
I flashed blisspop 6.0 and it always said "No sim card"
And when I flashed back to stock ZVC, it SOMETIMES says "No sim card"
Some of the time it works and I have my sim card read, but most of the time it doesn't work and it just shows up no sim card.
What should I do and does anyone know why?

same
i got the same problem :.( anyone to help us ????? :crying:

Install fulmiscrom 4.1 then no no error.

anurag061 said:
Install fulmiscrom 4.1 then no no error.
Click to expand...
Click to collapse
Link?

http://www.fulmics.com/rom-g3/
http://www.fulmics.com/rom-g3/

anurag061 said:
http://www.fulmics.com/rom-g3/
Click to expand...
Click to collapse
Will install and report back

It's just a harmless UI bug to my knowledge. As long as you continue to get a data connection and are able to make voice calls, you're good to go.

AlwaysLucky said:
It's just a harmless UI bug to my knowledge. As long as you continue to get a data connection and are able to make voice calls, you're good to go.
Click to expand...
Click to collapse
Dont' have LTE so I know it's not a UI glitch, but I did figure out how to get it back for the most part. Flashed ZVA modem and partitions and then deleted the contents of /data/misc/wifi/

Related

No Signal [4.4.4 LiquidSmooth v 3.2] [SOLVED]

Hi There
Yesterday I flashed LiquidSmooth v3.2 and since then i got no signal at all
First i ignored the first config (wifi and google account) as i was ansious to see the rom, and no signal. I thought this was the problem
Then i wiped cache/dalvik and started again as it should be, everything was alright but a lot of error messages on some ui crashed everything
Then i flashed 4.4 jbx cause... what if it was the problem. I don´t even know what to do, I´m newbie and still no signal
There´s also some error mount "/osh" while installing the rom and gapps
when installing jbx there was "set_perm: some changes failed
Now i noticed that airplane mode is looping on switch on/off and this is the causing the problem
But i still don´t know what to do
Need help. Thanks in advance.
Edinho376 said:
Hi There
Yesterday I flashed LiquidSmooth v3.2 and since then i got no signal at all
First i ignored the first config (wifi and google account) as i was ansious to see the rom, and no signal. I thought this was the problem
Then i wiped cache/dalvik and started again as it should be, everything was alright but a lot of error messages on some ui crashed everything
Then i flashed 4.4 jbx cause... what if it was the problem. I don´t even know what to do, I´m newbie and still no signal
There´s also some error mount "/osh" while installing the rom and gapps
when installing jbx there was "set_perm: some changes failed
Now i noticed that airplane mode is looping on switch on/off and this is the causing the problem
But i still don´t know what to do
Need help. Thanks in advance.
Click to expand...
Click to collapse
I have the exact same problem. Sometimes i get full signal with a R sign, but it doesn't work either.
I have also the /osh error, but i think its normal.
I will follow this thread, I hope you can find an answer.
U have a XT912 or XT910? For xt910 install umts_spyder for XT912 the spyder version.
Looks like u have the wrong version installed....
Go to /system/apps and delete the cellbroadcasetreceiver,apk and reboot
please tips please
DumbleCore said:
U have a XT912 or XT910? For xt910 install umts_spyder for XT912 the spyder version.
Looks like u have the wrong version installed....
Click to expand...
Click to collapse
Could be, but mine is XT910 (Razr Maxx); I downloaded umts_spyder.
It´s the right version; I can´t imagine what´s going wrong.
Downloaded tons of tutorials and it doesn´t works either.
None of them [tutorials] talk a thing about this message "Unable to mount "/osh", just mine;
Everything i try to do gives me the message:
"E:Unable to mount '/osh' "
and
"kernel does not have support for reading SELinux contexts"
Click to expand...
Click to collapse
Could be that in root i broke something?
Edinho376 said:
Could be, but mine is XT910 (Razr Maxx); I downloaded umts_spyder.
It´s the right version; I can´t imagine what´s going wrong.
Downloaded tons of tutorials and it doesn´t works either.
None of them [tutorials] talk a thing about this message "Unable to mount "/osh", just mine;
Everything i try to do gives me the message:
Could be that in root i broke something?
Click to expand...
Click to collapse
I have no idea what osh is. But i get it all the time with safetystrap and i just ignore it. doesnt seem to hurt anything.
I would try deleating the slot your using (unless your on stock because you cant). make a new slot. Install the correct rom i.e. umts_spyder for xt910 or spyder for xt912
flash your gapps and try again. v3.2 has been working great for me on slot 2 with no problems so far on my xt912
gitchrodd said:
I have no idea what osh is. But i get it all the time with safetystrap and i just ignore it. doesnt seem to hurt anything.
I would try deleating the slot your using (unless your on stock because you cant). make a new slot. Install the correct rom i.e. umts_spyder for xt910 or spyder for xt912
flash your gapps and try again. v3.2 has been working great for me on slot 2 with no problems so far on my xt912
Click to expand...
Click to collapse
How much space did you use in your slot?
I used 1gb for system
2 gb for data
600mb for cache
Is there any restrictions? What´s the best way?
Edinho376 said:
How much space did you use in your slot?
I used 1gb for system
2 gb for data
600mb for cache
Is there any restrictions? What´s the best way?
Click to expand...
Click to collapse
i just set it at what ever it comes up as when i make the slot. im running three roms carbon on stock, mokee on 1 and smooth on 2. i swear i set mokee at 1g system 2g data and 600mb for cache and when i go back and look its now 1018m system 2586m data and 574m cache. maybe it adjust itself for what it needs if thats possible.
But i dont think you can set it up wrong, as long as you can make the slot your good to go.
Is this normal?
Screenshot attached...
PS: this is the stock rom, that still works.
The screenshot is about the kernel, doubt it´s stock. Maybe when rooting something installed another one.
Just conjectures...
Edinho376 said:
Is this normal?
Screenshot attached...
Click to expand...
Click to collapse
for jellybean? stock rom?
---------- Post added at 06:16 PM ---------- Previous post was at 06:03 PM ----------
Edinho376 said:
Is this normal?
Screenshot attached...
PS: this is the stock rom, that still works.
The screenshot is about the kernel, doubt it´s stock. Maybe when rooting something installed another one.
Just conjectures...
Click to expand...
Click to collapse
well if your in Brazil i would go to mobile networks settings in the stock rom and copy everything down. transfer that to the custom rom see if that helps signal.
not sure about kernel just started playing with that stuff myself and has not gone well for me
you can always take the phone back to stock and start from scratch
rootzwiki.com/topic/13566-how-to-droid-razr-return-to-stock
had to do that when i set some stuff wrong with jbx kernel and got stuck in a boot loop
gitchrodd said:
for jellybean? stock rom?
---------- Post added at 06:16 PM ---------- Previous post was at 06:03 PM ----------
well if your in Brazil i would go to mobile networks settings in the stock rom and copy everything down. transfer that to the custom rom see if that helps signal.
not sure about kernel just started playing with that stuff myself and has not gone well for me
you can always take the phone back to stock and start from scratch
rootzwiki.com/topic/13566-how-to-droid-razr-return-to-stock
had to do that when i set some stuff wrong with jbx kernel and got stuck in a boot loop
Click to expand...
Click to collapse
Think I got everything messed up
Be patient please.. I´m newbie
Each Rom have its own kernel ?
Could you explain better this 'network settings' please? From where do i copy; and where can i paste it?
Edinho376 said:
Think I got everything messed up
Be patient please.. I´m newbie
Each Rom have its own kernel ?
Could you explain better this 'network settings' please? From where do i copy; and where can i paste it?
Click to expand...
Click to collapse
somebody better should probably explain kernels. but as far as i understand each rom is built around a specific kernel?> hopefully someone can jump in and explain that .
for network settings go to settings-mobile networks and write down how its all set up ie, data enabled? roaming, look at preferred network type is?
my phone for verizon in the u.s.a. is set
data enabled ...yes
data roaming ...yes
preferred network type is ....global
system select is set to ....automatic
cdma subscription is set to ....RUIM/SIM
Access Point Names....
one rom i used the preferred network was set to some crazy thing like "EvDo only" i think and i couldn't do better then basic phone calls. had a 1x for data. soon as i switched it to global i was up and running.
Im a newb also but i have screwed my phones up enough times i am starting to learn how to fix things. the razr is a good phone to mess with because as far as i can tell you cant mess it up so bad you cant fix it.
gitchrodd said:
somebody better should probably explain kernels. but as far as i understand each rom is built around a specific kernel?> hopefully someone can jump in and explain that .
for network settings go to settings-mobile networks and write down how its all set up ie, data enabled? roaming, look at preferred network type is?
my phone for verizon in the u.s.a. is set
data enabled ...yes
data roaming ...yes
preferred network type is ....global
system select is set to ....automatic
cdma subscription is set to ....RUIM/SIM
Access Point Names....
one rom i used the preferred network was set to some crazy thing like "EvDo only" i think and i couldn't do better then basic phone calls. had a 1x for data. soon as i switched it to global i was up and running.
Im a newb also but i have screwed my phones up enough times i am starting to learn how to fix things. the razr is a good phone to mess with because as far as i can tell you cant mess it up so bad you cant fix it.
Click to expand...
Click to collapse
Thought network settings was on some script or similar...
I tried this config... didn´t work either
if you can think about something else to try... all ideas are welcome
Edinho376 said:
Thought network settings was on some script or similar...
I tried this config... didn´t work either
if you can think about something else to try... all ideas are welcome
Click to expand...
Click to collapse
try a different rom. Carbon, Axxion, are both really good or CM11
Carbon is my favorite at the moment <my daily driver and flashed as my stock rom
http://forum.xda-developers.com/showthread.php?t=2423299
AxxionKat is a close second but the download server they use has been down for days.
http://forum.xda-developers.com/showthread.php?t=2761434
And for just a good stable basic KitKat you really cant beat CM11
http://forum.xda-developers.com/showthread.php?t=2535920
U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.
DumbleCore said:
U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.
Click to expand...
Click to collapse
Hey man,I must delete that file in almost every KK rom to obtain a signal.Do you?
Sent from my Razr XT910
DumbleCore said:
U can, as @davidjumanji said delete cell broadcast receiver apk from system app.
Also I'd try start again, wipe slot etc.
Mine is running complete stable! Try first without JBX-Kernel, then again with
Stock kernel doesn't affect these kk roms. Kk roms come with kexec kernel, kexec loads the kernel from kk rom on top of stock kernel.
Click to expand...
Click to collapse
Yesterday i tried to uninstall 'cellbroadcastreceiver.apk' and everytime i made/ received a call the cell turned off.
Then I just cleaned its data and force close, and it works normally; but i have to do this everytime i turn the phone on.
Coudn´t freeze this apk, cause my titanium backup is free version
What should i do?
welder73 said:
Hey man,I must delete that file in almost every KK rom to obtain a signal.Do you?
Sent from my Razr XT910
Click to expand...
Click to collapse
Edinho376 said:
Yesterday i tried to uninstall 'cellbroadcastreceiver.apk' and everytime i made/ received a call the cell turned off.
Then I just cleaned its data and force close, and it works normally; but i have to do this everytime i turn the phone on.
Coudn´t freeze this apk, cause my titanium backup is free version
What should i do?
Click to expand...
Click to collapse
I´m deleting this file before flashing the rom,everytime!it should not affect the calls or signal if deleted!
i´ve no problems with signal,dowloading with 900kb+ on 3g and so on,really strange.........
this ls rom works perfect for me with great battery
DumbleCore said:
I´m deleting this file before flashing the rom,everytime!it should not affect the calls or signal if deleted!
i´ve no problems with signal,dowloading with 900kb+ on 3g and so on,really strange.........
this ls rom works perfect for me with great battery
Click to expand...
Click to collapse
So I gotta open the zip, delete this apk and flash the rom... did i get?
Edinho376 said:
So I gotta open the zip, delete this apk and flash the rom... did i get?
Click to expand...
Click to collapse
Or you can delete it after,I do it with Es File Explorer.
Sent from my Razr XT910

Mobile data

So yea I have been recently playing around with my phone and putting on Lollipop but just before I was putting Lollipop my phone just all of a sudden gets no service anywhere I go, when I try to ring someone it says that I am in aeroplane mode. I have turned it on and back off but for some reason it still says it, whenever I try to send someone a text it says it will be sent when I have signal.
I need help like urgently as I use this phone for everything.
I used Clockwork mods Lollipop but I don't think that should mess with anything due to it happening before I updated.
Legit_767 said:
So yea I have been recently playing around with my phone and putting on Lollipop but just before I was putting Lollipop my phone just all of a sudden gets no service anywhere I go, when I try to ring someone it says that I am in aeroplane mode. I have turned it on and back off but for some reason it still says it, whenever I try to send someone a text it says it will be sent when I have signal.
I need help like urgently as I use this phone for everything.
I used Clockwork mods Lollipop but I don't think that should mess with anything due to it happening before I updated.
Click to expand...
Click to collapse
try resetting from recovery
BEingNiCK said:
try resetting from recovery
Click to expand...
Click to collapse
I take it you mean format the user data by that, so I just did will post results!
Edit:
Still not working :c
Legit_767 said:
I take it you mean format the user data by that, so I just did will post results!
Edit:
Still not working :c
Click to expand...
Click to collapse
you have modem issue i guess , if you have already upgraded/updated to lollipop and afterwards having this issue try flash stock rom 4.4.4 kitkat or ask someone to provide flashable modem zip hopefully that should fix too but i prefer 1st one flash stock rom:good::fingers-crossed:
BEingNiCK said:
you have modem issue i guess , if you have already upgraded/updated to lollipop and afterwards having this issue try flash stock rom 4.4.4 kitkat or ask someone to provide flashable modem zip hopefully that should fix too but i prefer 1st one flash stock rom:good::fingers-crossed:
Click to expand...
Click to collapse
I cant seem to find a stock rom for my Moto E 1021, could you help?

Went back to stock using TOT method, now i can't get 4G/LTE

Hi guys,
I flashed Resurrection Remix and it wouldn't start on the first boot. Restored nandroid and got stuck in bootloop, so I went back to stock using the TOT method (ZV4 then let OTA updates get me to ZVC), and I noticed that on my lock screen, it said LG instead of Sprint, and I noticed I had no data. So I tried the 3 dialer codes: ##UPDATE#, ##SCRTN#, and ##RTN#. After this I can now get 3G and it says Sprint on my lockscreen, but no 4g, In settings/mobile networks/network mode LTE/CDMA is selected. In settings/about phone/network, the mobile network type is either EvDo-rev.A or eHRPD(it goes back and forth). I'm wondering if its an APN setting but I can't find anything on this. Any ideas on how I can get 4G back? Thanks for any ideas.
Did you try a profile update? try running 2 of them, then a PRL update, than another profile update. It's pretty picky. [I mean though the System Update tab]
Warboy said:
Did you try a profile update? try running 2 of them, then a PRL update, than another profile update. It's pretty picky. [I mean though the System Update tab]
Click to expand...
Click to collapse
Tried your suggestion but no change, The first profile update took about a minute, and the others went really quick. Still no LTE.
curtvan said:
Tried your suggestion but no change, The first profile update took about a minute, and the others went really quick. Still no LTE.
Click to expand...
Click to collapse
Hmm, Try a reboot and a PRL update than a Profile Update?
curtvan said:
Hi guys,
I flashed Resurrection Remix and it wouldn't start on the first boot. Restored nandroid and got stuck in bootloop, so I went back to stock using the TOT method (ZV4 then let OTA updates get me to ZVC), and I noticed that on my lock screen, it said LG instead of Sprint, and I noticed I had no data. So I tried the 3 dialer codes: ##UPDATE#, ##SCRTN#, and ##RTN#. After this I can now get 3G and it says Sprint on my lockscreen, but no 4g, In settings/mobile networks/network mode LTE/CDMA is selected. In settings/about phone/network, the mobile network type is either EvDo-rev.A or eHRPD(it goes back and forth). I'm wondering if its an APN setting but I can't find anything on this. Any ideas on how I can get 4G back? Thanks for any ideas.
Click to expand...
Click to collapse
what copy of Resurrection Remix you flash?
Warboy said:
Hmm, Try a reboot and a PRL update than a Profile Update?
Click to expand...
Click to collapse
Just tried that, no change.
imerza82 said:
what copy of Resurrection Remix you flash?
Click to expand...
Click to collapse
It was Resurrection Remix 6.0.1 Marshmallow, but it was about a week ago so I'm not sure what version it was, I see it was updated 1/30.
I notice that it has a refresh animation by the signal meter now too. http://i.imgur.com/NqnUNPt.png Thats what made me think it was an APN setting. It does the refresh for about 30 seconds before it can find a signal.
[/COLOR]
curtvan said:
I notice that it has a refresh animation by the signal meter now too. http://i.imgur.com/NqnUNPt.png Thats what made me think it was an APN setting. It does the refresh for about 30 seconds before it can find a signal.
Click to expand...
Click to collapse
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
imerza82 said:
[/COLOR]
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
Click to expand...
Click to collapse
Maybe I will try that this weekend. I'm trying to get it back to stock so I can sell it.
imerza82 said:
[/COLOR]
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
Click to expand...
Click to collapse
Still no luck. Everything working good with Resurrection Remix except data is 3G and not LTE. I also tried flashing some different modems but that didn't change anything. I am thinking there is a partition that doesn't get wiped out during a TOT flash and something is wrong in that area. I am going to try to mess with APN settings when I get time.
curtvan said:
Still no luck. Everything working good with Resurrection Remix except data is 3G and not LTE. I also tried flashing some different modems but that didn't change anything. I am thinking there is a partition that doesn't get wiped out during a TOT flash and something is wrong in that area. I am going to try to mess with APN settings when I get time.
Click to expand...
Click to collapse
This may sound like a stupid question but, do you have a SIM card in?
cipollone88 said:
This may sound like a stupid question but, do you have a SIM card in?
Click to expand...
Click to collapse
Yes SIM card is in. I went back to stock everything again and the 4G problem remains.
curtvan said:
Yes SIM card is in. I went back to stock everything again and the 4G problem remains.
Click to expand...
Click to collapse
Using the ##RTN# dailer code and entering my MSL/SPC code has always got back to a fully functioning stock bloated device when needed. Best of luck to ya!

[VIDEO]Verizon Galaxy Note 3 How To Install CM13(6.0.1)-UNLOCKED BOOTLOADER

VIDEO- https://www.youtube.com/watch?v=d0ywccpcGwU&feature=youtu.be
Have you tested phone calls and everything to ensure it works fine on the Verizon network?
tomixnscale89 said:
Have you tested phone calls and everything to ensure it works fine on the Verizon network?
Click to expand...
Click to collapse
yup,yup.........everything works perfect
thereallugo said:
yup,yup.........everything works perfect
Click to expand...
Click to collapse
even snapchat?
thereallugo said:
yup,yup.........everything works perfect
Click to expand...
Click to collapse
LTE and Phone Calls?
Be careful, this did NOT work for me. I was able to get one phone call, but before that i had to fiddle with the phone to even get it to go on verizon. Now it doesn't connect, nor when i did have a connection did texting work. Right now I am restoring my backup from jasmine. I hope everything is still okay...
EDIT: First boot from restoring Jasmine took VERY long. I was scared about a bootloop, but thankfully since I have liveboot installed I could see it was doing SOME stuff. Right now it is upgrading apps. Will edit post again with my results once it's finished.
EDIT 2: Back on Jasmine, no cell at first, but going into settings and telling the phone to go back on CDMA did the trick. Reboot to get 4G back and you'll be fine. God that was scary, don't think i'll do that again for a while.
Can the Galaxy Gear softwar run on CM13 to sync the Gear watch?
Sent from my SM-N900V using Tapatalk
yenkoPR said:
even snapchat?
Click to expand...
Click to collapse
yeah even snapchat and lte
tomixnscale89 said:
Be careful, this did NOT work for me. I was able to get one phone call, but before that i had to fiddle with the phone to even get it to go on verizon. Now it doesn't connect, nor when i did have a connection did texting work. Right now I am restoring my backup from jasmine. I hope everything is still okay...
EDIT: First boot from restoring Jasmine took VERY long. I was scared about a bootloop, but thankfully since I have liveboot installed I could see it was doing SOME stuff. Right now it is upgrading apps. Will edit post again with my results once it's finished.
Click to expand...
Click to collapse
i dont know about verizon sim cards cause of their have a liink to their phone, but it would work on any other sim card, i make calls fine
No, gear manager won't work, I reverted back to jasmine...
tomixnscale89 said:
Be careful, this did NOT work for me. I was able to get one phone call, but before that i had to fiddle with the phone to even get it to go on verizon. Now it doesn't connect, nor when i did have a connection did texting work. Right now I am restoring my backup from jasmine. I hope everything is still okay...
EDIT: First boot from restoring Jasmine took VERY long. I was scared about a bootloop, but thankfully since I have liveboot installed I could see it was doing SOME stuff. Right now it is upgrading apps. Will edit post again with my results once it's finished.
Click to expand...
Click to collapse
I lost mobile data going to the official nightly 12.1 builds. I had to Odin back to stock, reroot, and reflash recovery. I'm restoring from there.
BackCheck said:
I lost mobile data going to the official nightly 12.1 builds. I had to Odin back to stock, reroot, and reflash recovery. I'm restoring from there.
Click to expand...
Click to collapse
For me all I needed to do was reflash my jasmine backup, and reset the mobile data settings to go back on CDMA. That was scary..
so the silver lining is at least we know the twrp backups work? I was wondering if anyone tried that yet.
xxxericxxx said:
so the silver lining is at least we know the twrp backups work? I was wondering if anyone tried that yet.
Click to expand...
Click to collapse
Yup. Hopefully we get some version of CM relatively soon. Fingers crossed! :fingers-crossed:
tomixnscale89 said:
For me all I needed to do was reflash my jasmine backup, and reset the mobile data settings to go back on CDMA. That was scary..
Click to expand...
Click to collapse
Well, I'm not saying I didn't overreact. And this really looks promising, a lot works right out of the gate.
BackCheck said:
Well, I'm not saying I didn't overreact. And this really looks promising, a lot works right out of the gate.
Click to expand...
Click to collapse
Cm 12.1 works on hltevzw?
davekaz said:
Cm 12.1 works on hltevzw?
Click to expand...
Click to collapse
I guess it depends on your definition of works, I've gotten CM13 to 'work' pretty much as well as 12.1. I could not get any mobile network connection, so no voice/sms/data. Several other things probably don't work as well, I did not test a lot but I had no FCs on any apps I tried. I did have to set the time manually to get a few things to work since there is no mobile network to sync time. To get it to load I had to change the asserts in SuperR's Kitchen.
The biggest caveat was that something does not restore right on mine. Each time I've flashed a CM rom I've been unable to get my mobile network back upon restore. I had to odin back stock over my restored system, reroot and reflash TWRP. One time I got a notification about my SIM not being a Verizon SIM but that was fixed with the above method.
michaeljr10wv said:
No, gear manager won't work, I reverted back to jasmine...
Click to expand...
Click to collapse
Didn't think so... I managed to get Gear Manager working on CM back with my old S3 but it was ugly and only partly worked. Thanks!
bishop0114 said:
Can the Galaxy Gear softwar run on CM13 to sync the Gear watch?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
ive had this installled for several hours now, and everything works so far! gear manager too!!!
it took forever to start up at first....and it says im a s5 instead of note
http://forum.xda-developers.com/galaxy-note-3/development/6-0-1-touchwiz-marshmallow-note-3-t3349306
davekaz said:
Cm 12.1 works on hltevzw?
Click to expand...
Click to collapse
Only 5.1.1 based ROM working 100% for me is Dirty Unicorns 9.8. I posted a thread in Verizon Note 3 General with link to that and LiquidSmooth which works for 3g but flakes out on LTE.
And again, OP needs to specify AT&T or move this to an AT&T thread... CM13 simply does not work on Verizon until RIL commits are merged.
---------- Post added at 10:28 PM ---------- Previous post was at 10:24 PM ----------
thereallugo said:
yup,yup.........everything works perfect
Click to expand...
Click to collapse
Please post logcat of calls and LTE connection on VZW.

No data after rom flash

I hope someone can help me..
Coming from stock firmware sprint Android 10.
Flashed ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X
Everything went flawlessly expect when boot I have no data.
Any suggestions please
darko454 said:
I hope someone can help me..
Coming from stock firmware sprint Android 10.
Flashed ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X
Everything went flawlessly expect when boot I have no data.
Any suggestions please
Click to expand...
Click to collapse
Make sure the correct APN is selected. If yes, look at the values inside of APN and then verify that they are correct. Google Sprint APN settings.
tcaudill01 said:
Make sure the correct APN is selected. If yes, look at the values inside of APN and then verify that they are correct. Google Sprint APN settings.
Click to expand...
Click to collapse
If you are referring to carrier settings under network and internet nothing happens when try to click
darko454 said:
If you are referring to carrier settings under network and internet nothing happens when try to click
Click to expand...
Click to collapse
Under "Network and Internet", select "Mobile Network", scroll to the bottom and select "Access Point Names". From there you should be able to see what carrier APN you have selected. If there is none, try pressing the "+" and add your own.
darko454 said:
If you are referring to carrier settings under network and internet nothing happens when try to click nothing
Click to expand...
Click to collapse
tcaudill01 said:
Under "Network and Internet", select "Mobile Network", scroll to the bottom and select "Access Point Names". From there you should be able to see what carrier APN you have selected. If there is none, try pressing the "+" and add your own.
Click to expand...
Click to collapse
thanks for the quick reply but when I click carrier settings nothing opens
I might reflash without sim card
No APN settings is why you have no data. I would try a reflash.
darko454 said:
thanks for the quick reply but when I click carrier settings nothing opens
Click to expand...
Click to collapse
darko454 said:
thanks for the quick reply but when I click carrier settings nothing opens
I might reflash without sim card
Click to expand...
Click to collapse
Ok so I re flashed with out sim,tried to install sim after boot, same result
darko454 said:
Ok so I re flashed with out sim,tried to install sim after boot, same result
Click to expand...
Click to collapse
For ****s and giggles, I would try another ROM. Better yet, I would restore back to stock and then try another install. That takes more time but will help ensure that you are starting from the most stable platform. If you go this route, remember to not restore stock 11, it will bootloop if you try to install a ton over it.
tcaudill01 said:
For ****s and giggles, I would try another ROM. Better yet, I would restore back to stock and then try another install. That takes more time but will help ensure that you are starting from the most stable platform. If you go this route, remember to not restore stock 11, it will bootloop if you try to install a ton over it.
Click to expand...
Click to collapse
I haven't flash gapps yet
Could it be that I haven't installed gapps
Not sure how to restore stock Android 10
Thanks
darko454 said:
I haven't flash gapps yet
Could it be that I haven't installed gapps
Not sure how to restore stock Android 10
Thanks
Click to expand...
Click to collapse
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809/
tcaudill01 said:
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809/
Click to expand...
Click to collapse
ok I compared the highlighted firmware from lolinet.com and the actual LMSA firmware (downloaded automatically) they look the same, also I see Fastboot_Mot_V1 not sure what's that for
my question is should I flash the LMSA firmware (downloaded automatically) with Fastboot_Mot_V1 or should I replace it with lolinets firmware? Just making sure
darko454 said:
ok I compared the highlighted firmware from lolinet.com and the actual LMSA firmware (downloaded automatically) they look the same, also I see Fastboot_Mot_V1 not sure what's that for
my question is should I flash the LMSA firmware (downloaded automatically) with Fastboot_Mot_V1 or should I replace it with lolinets firmware? Just making sure
Click to expand...
Click to collapse
Please READ all the steps in this guide before starting and follow their process.
How to downgrade Android 11 to 10
I unfortunately decided to upgrade my Moto G Power 2020 to Android 11 when the update was available and have had many issues most of which is that it is now very slow and battery drain is much higher. Have tried the many suggestions online to...
forum.xda-developers.com
tcaudill01 said:
Please READ all the steps in this guide before starting and follow their process.
How to downgrade Android 11 to 10
I unfortunately decided to upgrade my Moto G Power 2020 to Android 11 when the update was available and have had many issues most of which is that it is now very slow and battery drain is much higher. Have tried the many suggestions online to...
forum.xda-developers.com
Click to expand...
Click to collapse
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte
darko454 said:
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte
Click to expand...
Click to collapse
Does LTE show on stock? From Lineage or CrDroid were you able to find where you add or change the son? From either one, have you tried *#*#4636#*#* from the dial pad? You can change a lot of network specific things from there. You could try changing different band combinations to see if you can get a connection. You can also see what towers you are connecting to.
darko454 said:
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte
Click to expand...
Click to collapse
Did some searching and looks like other Sprint users had the same issue.
Search results for query: Sprint
forum.xda-developers.com
tcaudill01 said:
Did some searching and looks like other Sprint users had the same issue.
Search results for query: Sprint
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the Info
Is there any way developers can help us?
darko454 said:
Thanks for the Info
Is there any way developers can help us
Click to expand...
Click to collapse
darko454 said:
hey is it possible to use another firmware from a similar device like moto stylus?
Click to expand...
Click to collapse
Any info please
tcaudill01 said:
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809
Click to expand...
Click to collapse
is there any way to make a backup from the stock rom radio ,then flash it to custom rom ??
thanks

Categories

Resources