Related
Hi,]
Where can i find the original Samsung 2.3.4 KH3 rom ?? Ive seen one post on here but when i download it, its an exe file and doesnt have the 4 folders to do it in odin?
Matt
princepilot said:
Hi,]
Where can i find the original Samsung 2.3.4 KH3 rom ?? Ive seen one post on here but when i download it, its an exe file and doesnt have the 4 folders to do it in odin?
Matt
Click to expand...
Click to collapse
It will unzip when you run the exe file.
ive tried that and it just shows about 6 files all ending in img so doesnt have the right ones to do it in odin?
Matt
Ignore this one
princepilot said:
ive tried that and it just shows about 6 files all ending in img so doesnt have the right ones to do it in odin?
Matt
Click to expand...
Click to collapse
Did you download from here http://forum.xda-developers.com/showpost.php?p=16781168&postcount=3 ?
If yes then it should auto extract a tar file
Hehe ...wrong one
http://forum.xda-developers.com/showthread.php?t=1075278
Friends,
I have been having problems since I flashed XILA2 ROM. I was on XWKL1 earlier. In the first try of flashing XILA2, everything went smoothly and I was getting a good network signal of H+. But after rooting with CF root, I tried to do some mods with UOT Kitchen. The phone refused to boot after applying the UOT zip file in the Recovery mode. So I had to reflash the XILA2 Rom again via Odin.
Now the problem is that I am not getting any Network Signal after flashing the XILA2 ROM and the phone is asking me to "Insert a SIM card", even when the SIM card is already inserted in the phone.
So what should I do now to get my Network Signal back?
Did you flash a modem? Reflash the modem via Odin.
Sent from my GT-I9100 using Tapatalk
nikzDHD said:
Did you flash a modem? Reflash the modem via Odin.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I flashed the Intratech file of XILA2 which includes modem, Multi CSC. You just need to flash that single Tar file of Intratech by putting it in the PDA. Have flashed dozens of Intratech ROMs before without this problem.
Now IMEI is showing as "Unknown", IMEI SV is Unknown, Service State is showing as Out of Service.
What is the problem?
Efs corruption.
Hope that you have a backup of your efs folder.
Red_Vex said:
Efs corruption.
Hope that you have a backup of your efs folder.
Click to expand...
Click to collapse
what is EFS corruption? I have Titanium Pro installed, but I don't think I backed up anything in my phone.
What exactly happened and what to do now?
Hey Seniors, Experts.....any solution?
Calling the Seniors & Experts on this forum.....My IMEI showing as Unknown. No Network. I'm told my EFS has been corrupted. So what's the solution now???
Do you have EFS backup?? as far as i read, there is no backup which you have mentioned........
one solution is to get your phone back to samsung service ...hopw its under warrenty...
not sure whether it works or not....but try flashing a orignal samsung firmware...
TheMegastar said:
what is EFS corruption? I have Titanium Pro installed, but I don't think I backed up anything in my phone.
What exactly happened and what to do now?
Click to expand...
Click to collapse
If you have no backup, you could try this tool, seems to have helped some people get there EFS's back without having a backup.
Try this man:http://forum.xda-developers.com/showthread.php?t=1264021
veyka said:
If you have no backup, you could try this tool, seems to have helped some people get there EFS's back without having a backup.
Click to expand...
Click to collapse
Thanks Veyka, but I am scared to use this tool as it gives warning that it might brick my phone. Wouldn't it be wiser to just take my phone to the Service Centre while it is still working and is on STOCK ROM XWKL1 as it is still under warranty?
Also will it help if I reflashed just the MODEM again? I have read on some forums that flashing Modem again worked for some people. Can somebody give me the link to download the Modem file for XWKL1
nikzDHD said:
Did you flash a modem? Reflash the modem via Odin.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I would like to try reflashing a modem. Can somebody give me the link to download the MODEM FILE for XWKL1?? Help will be appreciated.
TheMegastar said:
I would like to try reflashing a modem. Can somebody give me the link to download the MODEM FILE for XWKL1?? Help will be appreciated.
Click to expand...
Click to collapse
if you have corrupted your efs folder and you dont have a back up of it and if the gs2 repair dont work then flashing even the modem wouldnt help...you now have a very expensive paper weight my friend...ouch
TheMegastar said:
I would like to try reflashing a modem. Can somebody give me the link to download the MODEM FILE for XWKL1?? Help will be appreciated.
Click to expand...
Click to collapse
Flash any modem, go to the modem sticky in android development, extract and flash modem.bin, try that before you do anything with efs.
Sent from my GT-I9100 using Tapatalk
nikzDHD said:
Flash any modem, go to the modem sticky in android development, extract and flash modem.bin, try that before you do anything with efs.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I have a modem_xwk1.rar file from which I have extracted modem_xwkl1.bin. So I can flash the modem_xwkl1.bin fil as it is via Odin or do I have to rename it to anything? If yes, then what should I rename the .bin file to?
umarian said:
Try this man:http://forum.xda-developers.com/showthread.php?t=1264021
Click to expand...
Click to collapse
That is what the tool i posted a link to does.
TheMegastar said:
I have a modem_xwk1.rar file from which I have extracted modem_xwkl1.bin. So I can flash the modem_xwkl1.bin fil as it is via Odin or do I have to rename it to anything? If yes, then what should I rename the .bin file to?
Click to expand...
Click to collapse
Flashing a modem wont help, if you have never rooted or flash any custom roms, then just take it to samsung or call your provider or whoever you got it from and tell them you lost service.
As you have flashed roms and mods and i imagine you have root, you might as well try the tool, It cant break the phone anymore than its allrdy broken.
And if the tool doesn't work, just flash back to stock, reset the flash counter with a USB jig and get it repaired under warranty, don't tell them about flashing custom roms, tell them it just happened.
veyka said:
That is what the tool i posted a link to does.
Flashing a modem wont help, if you have never rooted or flash any custom roms, then just take it to samsung or call your provider or whoever you got it from and tell them you lost service.
As you have flashed roms and mods and i imagine you have root, you might as well try the tool, It cant break the phone anymore than its allrdy broken.
And if the tool doesn't work, just flash back to stock, reset the flash counter with a USB jig and get it repaired under warranty, don't tell them about flashing custom roms, tell them it just happened.
Click to expand...
Click to collapse
Cool, will use that repair tool as a last resort. It will be pretty easy for me to invoke warranty so why go thru unnecessary trouble. Right now I just want to flash the Modem file as a last try. I have a file named MODEM_XWKL1.RAR which contains the file MODEM_XWKL1.BIN now all I want to know is which of these file is to be renamed and renamed to what for flashing via Odin???
TheMegastar said:
Cool, will use that repair tool as a last resort. It will be pretty easy for me to invoke warranty so why go thru unnecessary trouble. Right now I just want to flash the Modem file as a last try. I have a file named MODEM_XWKL1.RAR which contains the file MODEM_XWKL1.BIN now all I want to know is which of these file is to be renamed and renamed to what for flashing via Odin???
Click to expand...
Click to collapse
Just send it off for warranty then, as flashing the modem will not fix a corrupt EFS.
And to flash via odin, rename it to modem.bin, shove it inside a .tar file and flash it in the modem slot.
veyka said:
Just send it off for warranty then, as flashing the modem will not fix a corrupt EFS.
And to flash via odin, rename it to modem.bin, shove it inside a .tar file and flash it in the modem slot.
Click to expand...
Click to collapse
What do u mean by "shove it inside a .tar file"....do you mean I can just change the name of the file from modem.bin TO modem.tar OR I have to compress the modem.bin file using some compression tool?
"flash it in the modem slot" ....... I guess you mean flash it in the PHONE slot, coz there is no slot named Modem in Odin. Right?
Thank you for your patience.
Thanks all for trying to help, but I guess I'll have to invoke warranty
Thanks a lot for your help, everyone, I really appreciate.
I tried flashing the modem.bin file by renaming it to modem.tar and putting it in the Phone slot, but it failed in Odin. The top left box of ODIN turns RED and says Fail. So I guess I have no option now but to take the phone back to the company.
TheMegastar said:
I tried flashing the modem.bin file by renaming it to modem.tar and putting it in the Phone slot
Click to expand...
Click to collapse
Wow, just wow
If I rename my photo.jpg to photo.avi, will it make it into a movie?
Whenever I try to flash a ROM, it says:
E: Can't open /sdcard/*romname*.zip (bad)
I tried flashing kernels with ODIN, I tried downloading the ROMs again, I tried with multiple recoveries. How can I fix this?!
Have you rooted your phone first?
Redownload the file
sahibunlimited said:
Redownload the file
Click to expand...
Click to collapse
I did, and I said that too.
stubradley1 said:
Have you rooted your phone first?
Click to expand...
Click to collapse
Yes, I am rooted
juliuslucas said:
Whenever I try to flash a ROM, it says:
E: Can't open /sdcard/*romname*.zip (bad)
I tried flashing kernels with ODIN, I tried downloading the ROMs again, I tried with multiple recoveries. How can I fix this?!
Click to expand...
Click to collapse
Flash a rom how with Odin ??? if so are the files Odin flashable or CWM zip files .
This reads as you are flashing the wrong files with the wrong format .
zip bad means bad file its that simple .
What file are you trying to flash and with what is the basic question .
jje
JJEgan said:
Flash a rom how with Odin ??? if so are the files Odin flashable or CWM zip files .
This reads as you are flashing the wrong files with the wrong format .
zip bad means bad file its that simple .
What file are you trying to flash and with what is the basic question .
jje
Click to expand...
Click to collapse
Sorry if I was being unspecific, but I mean I tried flashing other kernels to see if it fixed my problem. I can open the .zip files that I am trying to flash on my computer, but I just can't seem to make them flash to my phone.
But what are you flashing the zip files with on the phone CWM 4 if so use a later CWM and root from Chainfires thread .
jje
JJEgan said:
But what are you flashing the zip files with on the phone CWM 4 if so use a later CWM and root from Chainfires thread .
jje
Click to expand...
Click to collapse
I am flashing with CWM, of course
I am on CF-Root kernel. I did try multiple recoveries, including the one in Siyah kernel. I'm sure that my phone is rooted, since I can do regular rooting stuff on it.
I just tried downloading the ROM again, and it still gives me that same error. There should be nothing wrong with my USB cable or connection, since I can transfer other files that work to my phone. I did try multiple ROMs, but they all just seem to not let me flash. It just stopped working all of a sudden.
I just looked at a thread with a guy having the same problem on his Transformer, and it turned out it was CWM corruption. He used something called Gnufabio RecoveryInstaller to fix it. Is there anything like this on the SGS II?
juliuslucas said:
I just tried downloading the ROM again, and it still gives me that same error. There should be nothing wrong with my USB cable or connection, since I can transfer other files that work to my phone. I did try multiple ROMs, but they all just seem to not let me flash. It just stopped working all of a sudden.
Click to expand...
Click to collapse
most probable case is your downloading everytime gettiing correpted..
try to download a ROM which has got MD5 checksum....and check the MD5 check sum after puting it into SD card using AFV tool market...
if you are on GB rom, download Siyah kernel Odin version and flash from Odin and see
zaheedahmed said:
most probable case is your downloading everytime gettiing correpted..
try to download a ROM which has got MD5 checksum....and check the MD5 check sum after puting it into SD card using AFV tool market...
if you are on GB rom, download Siyah kernel Odin version and flash from Odin and see
Click to expand...
Click to collapse
Good idea, I'll just have to find a ROM like that then I will try and downgrade to GB with ODIN and then flash Siyah with ODIN first, to see if that'll work.
juliuslucas said:
Good idea, I'll just have to find a ROM like that then I will try and downgrade to GB with ODIN and then flash Siyah with ODIN first, to see if that'll work.
Click to expand...
Click to collapse
Downgrading to GB and trying there didn't work, I'll have to find a ROM with a MD5 Checksum then. How was it that I checked the MD5 after it's on the phone?
juliuslucas said:
Downgrading to GB and trying there didn't work, I'll have to find a ROM with a MD5 Checksum then. How was it that I checked the MD5 after it's on the phone?
Click to expand...
Click to collapse
another option to try is....even chances are very less to work...download ROM manager and flash Clockworkmode from that and reboot into recovery from Rom manager, if flashing of update.zip seccess you will get a recovery, then you try to install rom from that...
this worked for me once when my CWM gave me a treble
zaheedahmed said:
another option to try is....even chances are very less to work...download ROM manager and flash Clockworkmode from that and reboot into recovery from Rom manager, if flashing of update.zip seccess you will get a recovery, then you try to install rom from that...
this worked for me once when my CWM gave me a treble
Click to expand...
Click to collapse
I'll try that. I just checked the MD5s, and it appears that the data I transfer to my phone gets corrupted. Maybe I should try downloading it from the phone.
MD5 before: FF9D66AB7449EF30360D0A5982338F97
MD5 after: 3C2AE2984024421FDF1A204315BE3CD0
juliuslucas said:
I'll try that. I just checked the MD5s, and it appears that the data I transfer to my phone gets corrupted. Maybe I should try downloading it from the phone.
MD5 before: FF9D66AB7449EF30360D0A5982338F97
MD5 after: 3C2AE2984024421FDF1A204315BE3CD0
Click to expand...
Click to collapse
hmmmmm, thanks to CWM for preventing bad files from flashing and bricking the phone
zaheedahmed said:
hmmmmm, thanks to CWM for preventing bad files from flashing and bricking the phone
Click to expand...
Click to collapse
I will try and download the ROM directly from my phone. This is getting on my nerves. I'm hoping that it's got nothing to do with my phone, and that it's just something to do with my computer or something. I'm running out of options here.
I am very, very, very, very, very, very relieved to inform you that it was indeed something with the connection from my computer to my phone! It worked! I wasted about three hours, but anyway. Thanks for sticking with me. Thanks to you!
juliuslucas said:
I am very, very, very, very, very, very relieved to inform you that it was indeed something with the connection from my computer to my phone! It worked! I wasted about three hours, but anyway. Thanks for sticking with me. Thanks to you!
Click to expand...
Click to collapse
we are glad........thank god
if you dont want to have to download the roms directly on youre phone, you can use Xlink to transfer them from your computer wirelessly, you download an app from the play store and get a client for your computer.
i was trying to install custom rom but it failed and phone rebooted and now its coming on sony logo and restarting
i also tried flashing 2.1 stock rom but still its rebooting on the logo
someone help :crying:
bluffking said:
i was trying to install custom rom but it failed and phone rebooted and now its coming on sony logo and restarting
i also tried flashing 2.1 stock rom but still its rebooting on the logo
someone help :crying:
Click to expand...
Click to collapse
did you try repairing via PC companion or update service SEUS.
search for them in google
THeLogiC said:
did you try repairing via PC companion or update service SEUS.
search for them in google
Click to expand...
Click to collapse
i tried pc companion
nothing happening
i had feralab v20 rom with ferekernal for locked bootloaders
i was changing the rom but something wrong went
i tried flashing .ftf of 2.1 but still its stuck there on SE logo
please help :crying:
bluffking said:
i tried pc companion
nothing happening
i had feralab v20 rom with ferekernal for locked bootloaders
i was changing the rom but something wrong went
i tried flashing .ftf of 2.1 but still its stuck there on SE logo
please help :crying:
Click to expand...
Click to collapse
try SEUS too. It works for some if PCC fails.
Use the latest flashtool just in case from here : http://androxyde.github.com/Flashtool/
get 2.3.3 ftf file from here: http://depositfiles.com/files/drj2ae6h8
unzip the above file to get .ftf file
and try to flash this if SEUS fails.
THeLogiC said:
try SEUS too. It works for some if PCC fails.
Use the latest flashtool just in case from here : http://androxyde.github.com/Flashtool/
get 2.3.3 ftf file from here: http://depositfiles.com/files/drj2ae6h8
unzip the above file to get .ftf file
and try to flash this if SEUS fails.
Click to expand...
Click to collapse
i am trying SEUS and i got the same flashtool
will download 2.3.3 .ftf and try it if SEUS does not works :fingers-crossed:
bluffking said:
i am trying SEUS and i got the same flashtool
will download 2.3.3 .ftf and try it if SEUS does not works :fingers-crossed:
Click to expand...
Click to collapse
good luck
THeLogiC said:
try SEUS too. It works for some if PCC fails.
Use the latest flashtool just in case from here : http://androxyde.github.com/Flashtool/
get 2.3.3 ftf file from here: http://depositfiles.com/files/drj2ae6h8
unzip the above file to get .ftf file
and try to flash this if SEUS fails.
Click to expand...
Click to collapse
THeLogiC said:
good luck
Click to expand...
Click to collapse
the .ftf link ur given is broken
you know any working link
bluffking said:
the .ftf link ur given is broken
you know any working link
Click to expand...
Click to collapse
oops didnt check the link.
grab any one from here:
http://www.virtual-productions.nl/default.asp?page=14
THeLogiC said:
oops didnt check the link.
grab any one from here:
http://www.virtual-productions.nl/default.asp?page=14
Click to expand...
Click to collapse
which one to select
i am from india
is there any specific version to select?
bluffking said:
which one to select
i am from india
is there any specific version to select?
Click to expand...
Click to collapse
You can select anyone I think as you will want to go into custom rom.
No problem in flashing any of version.
THeLogiC said:
You can select anyone I think as you will want to go into custom rom.
No problem in flashing any of version.
Click to expand...
Click to collapse
these are not .ftf file
i need .ftf as i can't even load into xrecovery
bluffking said:
these are not .ftf file
i need .ftf as i can't even load into xrecovery
Click to expand...
Click to collapse
as I said they are compressed.
unzip that file using winzip or winrar and you will get the required ftf
in pc companion for repair it takes lot of time to load on prepare
should i wait there or nothing is going to happen further
bluffking said:
in pc companion for repair it takes lot of time to load on prepare
should i wait there or nothing is going to happen further
Click to expand...
Click to collapse
personally I havent used pcc or seus myself.
I think its downloading the firmware.
do you have slow net speed something like 256 or 512 Kbps? if so it will take time to download it so you should wait
THeLogiC said:
personally I havent used pcc or seus myself.
I think its downloading the firmware.
do you have slow net speed something like 256 or 512 Kbps? if so it will take time to download it so you should wait
Click to expand...
Click to collapse
before this it downloaded something which took 1 hour
my net is slow but then nothing is coming except loading please wait there
bluffking said:
before this it downloaded something which took 1 hour
my net is slow but then nothing is coming except loading please wait there
Click to expand...
Click to collapse
If its slow it will take time coz firmware is itself more than 250 MB if not compressed.
I suggest download the file which I gave you the link
unzip it to get .ftf
flash via flashtool
this should work 99% of times
if it fails try SEUS
THeLogiC said:
If its slow it will take time coz firmware is itself more than 250 MB if not compressed.
I suggest download the file which I gave you the link
unzip it to get .ftf
flash via flashtool
this should work 99% of times
if it fails try SEUS
Click to expand...
Click to collapse
thanks a ton
phone back working again :silly:
bluffking said:
thanks a ton
phone back working again :silly:
Click to expand...
Click to collapse
Sent from my X10i
xxDeletedxx Sorry guys
Goat1378 said:
I pulled this from the new 4.4.4 NK4/N900PVPUDNK4_SPR zip
Its just baseband. Odin flashable tar file.
Do the following and you should be good.
1) download the NK4 tar file from the link below.
2)Power your device down completely using the 3 button combo (Power,Volume down,Home button.
3)Fire up Odinv3.09 UNCHECK auto reboot and load your tar into slot AP and hit start.
4)After it does its thing and shows its done unplug your usb cord and pull your battery.
5)Leave your battery out for 10sec. and put it back in.
6)Use your 3 button combo once more to boot into Download mode.
7)This time make sure to check auto reboot.
8)Load the same tar file again and flash.
After its done you should be good to go. Basically I'm just using the steps suggested by freeza on the NH7 Baseband update. So give that guy thanks too while your at it.
Heres a link to the full release of NK4 when it was brought to us by shadowcliffs http://forum.xda-developers.com/note-3-sprint/general/stock-rom-n900pvpudnk4-released-t2987901 to see what all the fuss is about. Give shadowcliffs thanks for bring this to us when you get over there and any of the other guys if you find there info useful.
NK4 (Modem only) https://www.androidfilehost.com/?fid=95887005526788421
NK4 (Full Update) https://www.androidfilehost.com/?fid=95887005526788395
If i missed any steps anyone feel free to correct me. HAPPY MODDING!!!!!!!!
Click to expand...
Click to collapse
Is their a NK4 flashable kernel zip floating around anywhere yet ?
Alright Goat.. Thank you for this..
In the past, at least on my former Nexus devices, I was able to just flash new radios via a zip in recovery without needing to go home and hook up to my PC to use Odin - is that possible with the Note 3 as well?
I'm at work and would love to just download the radio and update in recovery if possible.
chico260 said:
Is their a NK4 flashable kernel zip floating around anywhere yet ?
Click to expand...
Click to collapse
I will try and pull it from the update and zip it up and post here in a bit.
Does anyone know of a flashable through recovery zip for the modem? I'm currently without a computer. Thanks in advance.
rogerandgina said:
Does anyone know of a flashable through recovery zip for the modem? I'm currently without a computer. Thanks in advance.
Click to expand...
Click to collapse
You can't flash the modem in recovery.
Goat1378 said:
You can't flash the modem in recovery.
Click to expand...
Click to collapse
I thought there was a way if packaged right.
rogerandgina said:
I thought there was a way if packaged right.
Click to expand...
Click to collapse
I thought so too...
22stars said:
I thought so too...
Click to expand...
Click to collapse
There might be a way but I'm no developer and I'm not gonna pack it without knowing what I'm doing. I've never seen a recovery flashable modem. Not saying theres not a such thing. But I done know how. Sorry. I'm sure if its possible someone will make it.
Link
Does anyone have an active link for the modem only? Please and thanks.
njspank said:
Does anyone have an active link for the modem only? Please and thanks.
Click to expand...
Click to collapse
Is it not working? Try it again.
I just downloaded for later tonight and it worked for me
Goat1378 said:
Is it not working? Try it again.
Click to expand...
Click to collapse
Hey Goat, I don't know nuthin, but shouldn't the tar.md5 file contain a .img file instead of a .bin file?
But again, I don't know nuthin..
oldjackbob said:
Hey Goat, I don't know nuthin, but shouldn't the tar.md5 file contain a .img file instead of a .bin file?
But again, I don't know nuthin..
Click to expand...
Click to collapse
I'm not entirely sure but if you want an image I got an image for you! Lol jk . Not not really sure . I dl the nh7 to see what it had in it. Did it not work? Ill get it rite sooner or later.
oldjackbob said:
Hey Goat, I don't know nuthin, but shouldn't the tar.md5 file contain a .img file instead of a .bin file?
But again, I don't know nuthin..
Click to expand...
Click to collapse
I just downloaded this from freezas nh7 baseband and this is whats inside. Which is what i had at first.
So now im lost in the game. Cuz someone told to that just the modem bin worked.??????
Goat1378 said:
I'm not entirely sure but if you want an image I got an image for you! Lol jk . Not not really sure . I dl the nh7 to see what it had in it. Did it not work? Ill get it rite sooner or later.
Click to expand...
Click to collapse
No sir, didn't work for me but I'm not using the recommended route, I'm using Mobile Odin Pro.
When I open Philz Touch tar.md5 file (which contains a recovery.img file) from inside Mobile Odin, it recognizes that it's a recovery partition image and "pre-loads" it into that partition slot for flashing. But when I open the nk4 baseband tar.md5 file (which contains a modem.bin file) in Mobile Odin it says "Partition could not be found in file".
oldjackbob said:
No sir, didn't work for me but I'm not using the recommended route, I'm using Mobile Odin Pro.
When I open Philz Touch tar.md5 file (which contains a recovery.img file) from inside Mobile Odin, it recognizes that it's a recovery partition image and "pre-loads" it into that partition slot for flashing. But when I open the nk4 baseband tar.md5 file (which contains a modem.bin file) in Mobile Odin it says "Partition could not be found in file".
Click to expand...
Click to collapse
I do know we couldnt use moblie odin to flash nh7 cuz i tried.
Goat1378 said:
I do know we couldnt use moblie odin to flash nh7 cuz i tried.
Click to expand...
Click to collapse
Fair enough, like I said, I don't know nuthin, so y'all prolly shouldn't be paying much attention to me, lol.
But I'm still wondering, has anyone had any success flashing the NK4 baseband yet?
I
oldjackbob said:
Fair enough, like I said, I don't know nuthin, so y'all prolly shouldn't be paying much attention to me, lol.
But I'm still wondering, has anyone had any success flashing the NK4 baseband yet?
Click to expand...
Click to collapse
Yeah someone else did from from someone else that posted the baseband. Not sure who. Screen shot of whats in the update.