Hello. I'm kind of new to this stuff, last night i attempted to flash the Androplus kernel v21 for Z5c and the experimental TWRP "suzuran twrp 3.0" (no error messages) . Yet i realised that i coudn't access the recovery and the kernel remained the same.
I was wondering if it was a problem with my bootloader being still locked , i followed evey steps to unlock it : at the end since no error popped up i rebooted my device and assumed it was unlocked since my data was gone......
Is there a problem with my bootloader , or with my fastboot setup ? (each time i issue a command , something pops up and instantly disappear....is it normal ?........oh and when i type "fastboot devices" nothing happen.....)
To sumarize, i need help, i have a sony Z5c with marshmallow 6.0. Thanks in advance (and sorry if i created this thread in the wrong section, i'm not sure if i did , it's my first thread )
you have to flash with an old version of TWRP.
there is some error in TWRP 3.0 as it can't mount /system /data etc.
try old recovery to flash new kernel may it should work.
hackersecrets said:
you have to flash with an old version of TWRP.
there is some error in TWRP 3.0 as it can't mount /system /data etc.
try old recovery to flash new kernel may it should work.
Click to expand...
Click to collapse
Thanks man, but what about the kernel? Because I think I need to flash the kernel first before flashing the recovery. Right? And it did nothing......anyway I'll try what you suggested right now
Edit: i re-installed everything, now it's working
Related
I Unlocked the bootloader 3 days ago and flashed Cyanogenmod 12.1 with exact gapps and was able to use the phone perfectly ,today I searched for xposed and found that it could be only installed by manual flashing for android lollipop , so I downloaded the zip file and rebooted my phone in Recovery Mode [ TWRP ] and flashed the zip file just after that the phone stuck at bootloop. Restarted the phone 3 time's but no luck so finally I got into bootloader by pressing the volume down button and the power button and opened recovery mode to factory reset the phone and reflashed the CM 12.1 with gapps , now the problem begin's when I restarted the phone it is stuck at "Warning Bootloader Unlocked" and even the recovery mode is stuck at beginning screen of twrp , Im only able to use the bootloader . Even tried to reflash TWRP Recovery from computer but thier's no change it is still stuck at the recovery screen .
Any help would be really appreciated
try reflashing and then wiping cache's before rebooting ?
like the regular cache and dalvik cache.
also don't expect the first boot to work quick.. leave it for a long time...
good luck.
Actully the problem is , when i try to open recovery mode it stucks at teamwin logo (twrp)
"I searched for xposed and found that it could be only installed by manual flashing for android lollipop"
Click to expand...
Click to collapse
that quote is confusing.. what did you mean exactly.
What TWRP ? From Where + what version # ?
If i were you i would re-download it then MD5 hash it.. verify it !
I always check the md5 hashes on any phone roms or firmware etc.
I have had tons of incomplete downloads and there is nothing wrong with my internet connection either.
The more detailed you can be the more likely someone can help.
Once you are positive your TWRP is downloaded properly if i were you
i would re-flash it with fastboot. (if you can)
Can you power off the phone and put it in bootloader mode then connect to pc ?
power it off then hold volume down + power then plug in USB
then right click the empty space in the windows folder (assuming no Linux)
select open command prompt here then type:
adb devices
Is it listed ?
I also assumed you have "Minimal ADB and Fastboot" installed.
Sounds like you flashed a 5.1 firmware package ?
yes ? which one ?
And watch out many sites have cut off my download on me while downloading them.
and if you then flashed a half completed download you could prob damage the phone.
for checking hashes on windows i use HashSlash.. it's clean / free and has a GUI ..google it
Basically , first I flashed Android 5.1.1 AOSP for my device and then Cyanogenmod 12.1 Nightly Surnia . and yes I tried to reflash TWRP Recovery but it is stuck at the same Teamwin Logo screen , and i flashed the latest version of twrp which was available on xda . Can you provide me worth some kind of image file which I can flash to Factory reset my device from computer or anything else which can help.
And by the way Thanks for the quick reply
sabungolfer0011 said:
Basically , first I flashed Android 5.1.1 AOSP for my device and then Cyanogenmod 12.1 Nightly Surnia . and yes I tried to reflash TWRP Recovery but it is stuck at the same Teamwin Logo screen , and i flashed the latest version of twrp which was available on xda . Can you provide me worth some kind of image file which I can flash to Factory reset my device from computer or anything else which can help.
And by the way Thanks for the quick reply
Click to expand...
Click to collapse
https://mega.nz/#F!rMIhDLgR!oq5Cz_XbgZLEEysmqoYtcA
i used that.. but didn't flash my phone yet.
that is all firmware packages stock for Moto-2015
You still have not mentioned a lot like where did you get TWRP and what version ?
What carrier is your phone ?
I take it you unlocked the bootloader or did you get it like that ?
I'm guessing the bootloader loads TWRP
so either of those is probably damaged i bet.
I would try and get it stock then work from there getting TWRP back on and rooting etc.
What i was trying to ask you is..
Was your phone on 5.02 and you tried to update it to v5.1 ?
Because i have seen other people here who had problems with that.
Relocking the bootloader can cause problems and so can reverting to an old ver from 5.1 to 5.02
I used a custom kernel and TWRP from Squid here on the forum and rooted
and his kernel is only good for me up to version 5 but he has way newer versions out..
but they are only for users who updated to 5.1
So you have to be VERY careful what your doing.
I might have screwed up my phone if i didn't notice the fine print.
Also just search the forum for some guides on flashing firmware
and verify the downloads
My Bootloader is unlocked , TWRP Recovery Version 2.8.6.0 . My phone was on Android 5.0.2 [ Official Non Rooted ] , so I thought of updating it to 5.1.1 which was available as custom rom So I unlocked the bootloader flashed TWRP version 2.8.6.0 by copying Recovery.img in minimal adb folder and oped CMD and flashed the custom recory and it was no problem , then 2 days ago I flashed Cyanogenmod.12.1.Surnia.20150829.zip and it worked fine no issues then I flashed Xposed Modular in recovery mode , now when I tried to restart the system it stuck at bootloop so I entered Bootloader and again restarted 2, 3 times but no luck so I again entered bootloader and entered Recovery Mode ( TWRP 2.8.6.0) and wiped all my data , But unfortunately I was outside so I dint had the firmware and gapps so I switched the phone off in hope that ill flash the firmware and gapps when i reach back home . So when I vame back home and pasted the firmware and gapps in memory card and inserted it baxk in the phone and tried to enter recovery mode , that was the first time when I experied That teamwork logo stuck at recover mode and the further story you laready know
Hi folks, i am struggling with this issue the last 2 days,
first i kinda bricked my X, i followed this guide to bring it back on
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
i made all updates available to 3.1.4... i unlocked boot loader, flashed TWRP blu_sp★rk r175 and afterwards tryed to flash latest CM13 nightly
but with no luck, i am always receiving Error 7.. does anyone has a solution to this?
thanks in advance!
Tommyr84 said:
Hi folks, i am struggling with this issue the last 2 days,
first i kinda bricked my X, i followed this guide to bring it back on
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
i made all updates available to 3.1.4... i unlocked boot loader, flashed TWRP blu_sp★rk r175 and afterwards tryed to flash latest CM13 nightly
but with no luck, i am always receiving Error 7.. does anyone has a solution to this?
thanks in advance!
Click to expand...
Click to collapse
There's no blu spark kernel for ROMs/OOS with updated bootloader . Not sure if that's what causing the error 7 but its a start. Try using. Sultans uodated twrp I don't have any issues with it.
Exodusche said:
There's no blu spark kernel for ROMs/OOS with updated bootloader . Not sure if that's what causing the error 7 but its a start. Try using. Sultans uodated twrp I don't have any issues with it.
Click to expand...
Click to collapse
hmmm.. ok, i will give it a try! Thanks, i will tell if this works out
Tommyr84 said:
hmmm.. ok, i will give it a try! Thanks, i will tell if this works out
Click to expand...
Click to collapse
V175 is a kernel
You certainly flashed BS TWRP V41.
Kéno40 said:
V175 is a kernel
You certainly flashed BS TWRP V41.
Click to expand...
Click to collapse
so i tried sultans TWRP (Sultan-TWRP-onyx-3.0.2-3_2016-10-23)... also flashed SuperSU.. worked like a charm!
But when i am trying to flash CM13 (cm-13.0-20161122-NIGHTLY-onyx) i still get Error 7 ...
You tried to flash TWRP for CM13 sultan rom ?
Tommyr84 said:
so i tried sultans TWRP (Sultan-TWRP-onyx-3.0.2-3_2016-10-23)... also flashed SuperSU.. worked like a charm!
But when i am trying to flash CM13 (cm-13.0-20161122-NIGHTLY-onyx) i still get Error 7 ...
Click to expand...
Click to collapse
Flash twrp from here
http://forum.xda-developers.com/one...al-twrp-3-0-2-0-recovery-onyx-t3471584/page10
Fap4k said:
Flash twrp from here
http://forum.xda-developers.com/one...al-twrp-3-0-2-0-recovery-onyx-t3471584/page10
Click to expand...
Click to collapse
ok, i flashed this Twrp version, same error ! Error : 7 Error installing zip file
i realy don't know which point i am missing, i downloaded the CM13 nightly fresh from the official side...
i can't be the only one who is facing this error
Update the Boot-loader first, you can follow a post found in home page of opx, u still have to use another TWRP recovery (not official) after updating bootloader. U vil get all info in the thread.
raj.ify said:
Update the Boot-loader first, you can follow a post found in home page of opx, u still have to use another TWRP recovery (not official) after updating bootloader. U vil get all info in the thread.
Click to expand...
Click to collapse
Hi, according to your post, i followed this description http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
flashed "OPXBLUpdateOOS3.1" and new TWPR afterwards "twrp-3.0.2-2_blu_spark.v41-onyx_by-engstk.img" with no error!
rebooted into recovery, tried to install "cm-13.0-20161204-NIGHTLY-onyx" ... and guess what?! ERROR 7 again!
so i am defenetly on new bootloader, i tried all 3 options from the threat above (flashed via ADB and via SD card) no problem! also got bootloader unlocked info form ADB.
everything works, till i try to flash a CM image... then i receive ERROR 7 ;(
Hey There,
I`m stuck with the same Error.
The only Recovery i can boot ist the normal TWRP Recovery.
The blu Spark TWRP Recovery, the Stock Recovery and the CM13 Nighty Onyx Recovery wont work. I get the fastboot DTB not found Error.
And I cant install any custom ROM. I Always get the Error 7, ZIP could not be installed from Z://
If i erase the Assets it boots directly in to Bootloader (without saying Fastboot Mode on the screen, but with the OnePlus Logo).
If I flash one of the CM14 versions it gives no error 7 but boots into the Bootloader as well.
I have no custom kernel installed.
My plan was to flash the CM13 Nighty Onyx Recovery but I cant get around the DTB error,
Thanks for Help.
Greetings Clon
EDIT:
I tied the BL Update from the mentioned thread above.
aaaaand: Error 7
Here is my complete error:
Code:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
[COLOR="Red"]Updater ended with ERROR: 7
Error installing zip file '/sdcard/ROMs/cm-13.0-20161122-NIGHTLY-onyx.zip'[/COLOR]
---------- Post added at 05:33 PM ---------- Previous post was at 04:56 PM ----------
Okay I have a Solution, but I dont know how I did it.
This is what I made.
1. I did a factory reset.
2. I did a factory reset. (Why not tho)
3. I restarted the recovery.
4. I did a factory reset.
5. I changed the filesystem for data partition. (It was on ext4, but I changed it to ext4 although to get Errors out or something like that.
6. I rebooted into Bootloader.
7. I flashed and booted this recovery: http://forum.xda-developers.com/devdb/project/dl/?id=20236&task=get (and got no dtb error. yay!)
8. I installed the nightly CM, and the latest gapps (and i got no error 7. yay!)
I know its a bit random but i think the error has to do something with the data partition and the filesystem....
Void your warranty!
hey all!
So this is a first for me... I've been rooting and playing with android for a very long time (going back to the g1 days) and this is the first time I've ever seen this.
So I was on an old version of CM and decided it was time to update finally. I had unrooted a long time ago, but was still running cm perfectly fine. I went to install a new version of recovery (so I could update) and now when I try to boot into recovery I just get the oneplus logo. Here's the strange part, the phone isn't soft bricked... I can still boot into android no problem.
Anyone else every seen this problem? Do I need to start over (unlock bootloader, root, recovery, rom)?
Anyone else ever seen this happen on Oneplus One or any other phone for that matter?
Thanks in advance!
Same Problem Here
I am having the same exact issue with my OPX: I wanted to update my old CyanogenMod and for that I needed to update my TWRP. After I flashed it successfully when trying to boot into Recovery it stucks on the 1+ Logo forever.
If I boot into OS it works (the same old CM since I haven't been able to upgrade), Fastboot as well, it's Recovery that doesn't work.
I found some post for the OP3 that state:
WHY AM I STUCK ON THE TWRP SPLASH SCREEN FOR 8 HOURS?
Be patient, wait another 8 hours.
Just kidding, try this while stuck on the loading screen:
adb shell wipe_misc; adb shell reboot recovery
Some devices might somehow get a flag set in misc that tells the bootloader to ignore the android boot image command line.
This results in the kernel not receiving the hardware name (qcom), which then confuses recovery and causes it to wait forever. FOREVER.
Click to expand...
Click to collapse
I tried it and I got the following error:
/system/bin/sh: wipe_misc: not found
Click to expand...
Click to collapse
I don't know what else to do now. Please help.
janc_z said:
I am having the same exact issue with my OPX: I wanted to update my old CyanogenMod and for that I needed to update my TWRP. After I flashed it successfully when trying to boot into Recovery it stucks on the 1+ Logo forever.
If I boot into OS it works (the same old CM since I haven't been able to upgrade), Fastboot as well, it's Recovery that doesn't work.
I found some post for the OP3 that state:
I tried it and I got the following error:
I don't know what else to do now. Please help.
Click to expand...
Click to collapse
I'm guessing we need to do a full wipe, and go back to the begining (root, reflash reocvery, reflash rom), but hoping not...
zbt1985 said:
I'm guessing we need to do a full wipe, and go back to the begining (root, reflash reocvery, reflash rom), but hoping not...
Click to expand...
Click to collapse
I guess you were right! Here's what I did:
- Tried to reflash TWRP using adb. It did flashed it but couldn't boot it and throws error "dtb not found".
- I found this post that first suggested to use the Blue Spark version of the TWRP. I tried adb-ing it and got the same error.
- In a later comment the following video was suggested: https://www.youtube.com/watch?v=kTdKmceC5xU.
- I the downloaded the stock recovery and the stock ROM from this page: https://devs-lab.com/download-oneplus-official-stock-rom.html. Be sure to find the OnePlus X section.
- Using adb I flashed the stock recovery, did a full wipe, rebooted and copied the stock ROM to my SD card.
- Reboot to Recovery, flash from local, selected the Stock ROM zip and let it do its thing.
- Again, from Fastboot I flashed the latest TWRP. I didn't get any errors now!
- Downloaded the Tesla ROM and flashed it using TWRP.
Everything is working fine now!
janc_z said:
I guess you were right! Here's what I did:
- Tried to reflash TWRP using adb. It did flashed it but couldn't boot it and throws error "dtb not found".
- I found this post that first suggested to use the Blue Spark version of the TWRP. I tried adb-ing it and got the same error.
- In a later comment the following video was suggested: https://www.youtube.com/watch?v=kTdKmceC5xU.
- I the downloaded the stock recovery and the stock ROM from this page: https://devs-lab.com/download-oneplus-official-stock-rom.html. Be sure to find the OnePlus X section.
- Using adb I flashed the stock recovery, did a full wipe, rebooted and copied the stock ROM to my SD card.
- Reboot to Recovery, flash from local, selected the Stock ROM zip and let it do its thing.
- Again, from Fastboot I flashed the latest TWRP. I didn't get any errors now!
- Downloaded the Tesla ROM and flashed it using TWRP.
Everything is working fine now!
Click to expand...
Click to collapse
Lucky you!
I on the other hand can't connect via adb, only fastboot...
So I accidentally flashed a wrong boot.img while on my current ROM (AOSiP 8.1) The wrong flash caused my system to be somewhat destroyed (Can't mount and others). The only hope I had was to do the FastBoot method which somehow worked but returned me to MIUI 9.
I did all the rooting and recovery process again and decided to flash the AOSiP ROM again with the proper procedures but as soon as I install after wiping I get the error something like "twfunc failed to flash repacked image". I thought it was just a corrupt download but after downloading twice and using another ROM it was still the same. Can somebody please help me? It's a hassle going through the FastBoot flash method again and it might get worse if not yet fixed ASAP.
ClockUpEx said:
So I accidentally flashed a wrong boot.img while on my current ROM (AOSiP 8.1) The wrong flash caused my system to be somewhat destroyed (Can't mount and others). The only hope I had was to do the FastBoot method which somehow worked but returned me to MIUI 9.
I did all the rooting and recovery process again and decided to flash the AOSiP ROM again with the proper procedures but as soon as I install after wiping I get the error something like "twfunc failed to flash repacked image". I thought it was just a corrupt download but after downloading twice and using another ROM it was still the same. Can somebody please help me? It's a hassle going through the FastBoot flash method again and it might get worse if not yet fixed ASAP.
Click to expand...
Click to collapse
Did you try using redwolf recovery? Also do this. Go to en.miui.com and dl the latest miui zip. Using redwolf try to flash it. If you are able to do it then possibly it's something with stock twrp. If not then you might need to fastboot flash miui again. The last option would be to use edl mode.
I tried FastBoot method flashing the latest MIUI 9 build. Worked out fine but after Rooting again and adding Recovery, flashing ROMs give me Error7 most of the time. What I did is I accidentally clicked the Clear All on the MiFlash and resulted to my problem being fixed while losing all files in my internal. Noooooo!
ClockUpEx said:
I tried FastBoot method flashing the latest MIUI 9 build. Worked out fine but after Rooting again and adding Recovery, flashing ROMs give me Error7 most of the time. What I did is I accidentally clicked the Clear All on the MiFlash and resulted to my problem being fixed while losing all files in my internal. Noooooo!
Click to expand...
Click to collapse
Soo? Is it fixed now? Is that what you mean?
Hello everyone, after a long attempt at unlocking the bootloader i finally got it, i flashed TWRP and got a prompt for encryption password, and my password wasn't working and i also tried default_password,so i read that the format data option will decrypt the phone and people said wouldn't do anything to system, so i did it and now everytime i reboot it boots straight into recovery no matter what i try, it will also boot into fastboot, so i tried to find a stock ROM for TA-1056 but couldn't find it anywhere, the only the i found was a single ROM for the TA-1060, can anyone help? i really appreciate it!
Completely Bricked
Me too need a stock rom of ta 1056. Please help if you could manage to provide a helping hand... ?
I had the same issue like yours, looping in twrp. then i tried to flash it with a so called stock rom from net, guess what it went completely bricked and I donnow what to do. ??
mrabudi said:
Hello everyone, after a long attempt at unlocking the bootloader i finally got it, i flashed TWRP and got a prompt for encryption password, and my password wasn't working and i also tried default_password,so i read that the format data option will decrypt the phone and people said wouldn't do anything to system, so i did it and now everytime i reboot it boots straight into recovery no matter what i try, it will also boot into fastboot, so i tried to find a stock ROM for TA-1056 but couldn't find it anywhere, the only the i found was a single ROM for the TA-1060, can anyone help? i really appreciate it!
Click to expand...
Click to collapse
It's simple. just get the stock recovery (and boot, optional) to flash it with fastboot and go to recovery and wipe it and you'll be ok.
and also using the twrp on this phone is not a great idea to wipe.
if you wanna wipe. please use "fastboot -w" to wipe the phone while bootloader is unlocked. or stock recovery to wipe.
Because twrp built this recovery with only formatting option was ext4 to /data and /cache. So the phone cannot operate properly. Which leads to fake failed decryption notification.
Data partition must need to be formatted under f2fs format.
And finding rom for this phone is pretty easy. Just find some nb0 file for this phone (any variant of this phone should work) and extract it with "nb0 extractor" and then flash it with SP Flash tool by mediatek.
That's my way. I don't know how will you do. But normally you only need the nb0 file and then flash it with OST LA (Nokia's flash tool based off Intel's SUT L1/L3 tool).
My Nokia 1 TA-1047 stuck at Nokia logo screen
Hi guys, sorry I'm newbie so after a long time surfing for solutions, I couldn't solve my own problem. That's why I come here to ask for your supports
Firstly I unlocked bootloader, installed TWRP and rooted my device and enjoyed it. But after decided to wipe (factory reset) this phone with TWRP, and my problem began...
1. I got stuck in TWRP loop booting. After that I tried to fastboot system.bin, cache.bin and recovery.bin from Stock Firmware but it still hung at Nokia logo booting
2. I still kept trying with SP Flash Tool, Miracle Box but there was still no hope:
- SP Flashtool v5_1548 gave me error: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
- Miracle Box 2.27A told me there was an error (i don't remember the code) occured in the location (i can't remember its code either)...
Anyone can solve it please help!!!! I love this phone much and as of now still suffering day by day since I can't do anything with it.
Kindly appreciate any suggestion and solution.
Thank you all!
cuantonhonhoi said:
Hi guys, sorry I'm newbie so after a long time surfing for solutions, I couldn't solve my own problem. That's why I come here to ask for your supports
Firstly I unlocked bootloader, installed TWRP and rooted my device and enjoyed it. But after decided to wipe (factory reset) this phone with TWRP, and my problem began...
1. I got stuck in TWRP loop booting. After that I tried to fastboot system.bin, cache.bin and recovery.bin from Stock Firmware but it still hung at Nokia logo booting
2. I still kept trying with SP Flash Tool, Miracle Box but there was still no hope:
- SP Flashtool v5_1548 gave me error: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
- Miracle Box 2.27A told me there was an error (i don't remember the code) occured in the location (i can't remember its code either)...
Anyone can solve it please help!!!! I love this phone much and as of now still suffering day by day since I can't do anything with it.
Kindly appreciate any suggestion and solution.
Thank you all!
Click to expand...
Click to collapse
So here's the thing. The rom you downloaded from internet (about 2 GB) or ripped from your phone and reflashing from flash tool will NOT WORK.
The first reason you can't flash the ROM was:
You got into flashing mode but you didn't do the right way so it failed the downloading DA for the phone. Try again and it should work (Don't go into fastboot mode)
2nd reason:
Because of the unsupported chip that MiracleBox read. It said the phone was 6573 or something while the phone chip is 6737M.
So the app will create the wrong version of the scatter for the phone. Leads to the flash tool app downloading the wrong command and Download Agent for the phone makes the phone can't be flashed.
You need to get the official nb0 file for this phone (TA-1060 or 66 should also works, mine was TA-1047. Since it's a universal ROM so any variant of the phone can also work) and then extract the ROM. Then you can get the scatter text file from that nb0 ROM and then flash it over flash tool (version 5 recommended, version 3 more likely not work).
Remember to look at line with partition "metadata" and then edit "boundary_check" to false.
PLUS:
If you flash it with your own dumped EMMC rom or flash it by dd-ing the partition in recovery will kinda work. But when you update the ROM over OTA (Google Play services's System Update app)
It will most likely bootlooped the phone when it's trying to verify the 2nd partition of the same recovery or kernel flashed into the phone (https://source.android.com/security/verifiedboot) and flash the updated one.)
So flashing from official ROM is mandatory.
And you can flash it over Intel's (Nokia modified) flash tool app SUTL3 (aka. OST LA) but I can't get it to work so you just stick with Flash Tool v5 from MediaTek and you'll be good.
Link:
The nb0 ROM (Security update around May 2018): https://drive.google.com/file/d/1XqwEAGG7GMaspzV2J_yzCxnRei8zsOJd/view
(Source: https://romprovider.com/2018/09/nokia-1-ta-1060-firmware/)
nb0 extractor, requires java installed (If extracting hurts your hard disk performance aka. frozen or lag. Don't worry, It actually works, DON'T DO ANYTHING. It will notify you once it's done.): https://forum.xda-developers.com/general/general/tool-unpack-repack-nb0-rom-t3495091
Smart Phone Flash Tool from MediaTek: https://spflashtools.com/
My fixed scatter file that actually works from nb0 file: https://drive.google.com/open?id=1gRoADGHBm4vIAw3NeDyc_h9QWj12XUrC
And don't use twrp for wiping the phone. Use "fastboot -w" to wipe or use stock recovery.
TWRP will wipe the data parition but in ext4 format and make the phone bootlooped. We need f2fs in order to make the phone's /data partition run correctly. (Unless you know how to make the phone not having encryption flag when booting up every first time. Or modify TWRP to wipe the /data partition with make_f2fs and not make_ext4 app. Or using make_f2fs in recovery to directly wipe /data partition over terminal, the actual partition is in /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata.)
Or you just do this (I'm not tested it yet): Google "twrp f2fs format"
kutiz21 said:
So here's the thing. The rom you downloaded from internet (about 2 GB) or ripped from your phone and reflashing from flash tool will NOT WORK.
The first reason you can't flash the ROM was:
You got into flashing mode but you didn't do the right way so it failed the downloading DA for the phone. Try again and it should work (Don't go into fastboot mode)
2nd reason:
Because of the unsupported chip that MiracleBox read. It said the phone was 6573 or something while the phone chip is 6737M.
So the app will create the wrong version of the scatter for the phone. Leads to the flash tool app downloading the wrong command and Download Agent for the phone makes the phone can't be flashed.
You need to get the official nb0 file for this phone (TA-1060 or 66 should also works, mine was TA-1047) and then extract the ROM. Then you can get the scatter text file from that nb0 ROM and then flash it over flash tool (version 5 recommended, version 3 more likely not work).
Remember to hide/delete line with partition "metadata" in scatter.txt and you can flash it perfectly.
PLUS:
If you flash it with your own dumped EMMC rom or flash it by dd-ing the partition in recovery will kinda work. But when you update the ROM over OTA (Google Play services's System Update app)
It will most likely bootlooped the phone when it's trying to verify the 2nd partition of the same recovery or kernel flashed into the phone (https://source.android.com/security/verifiedboot) and flash the updated one.)
So flashing from official ROM is mandatory.
And you can flash it over Intel's (Nokia modified) flash tool app SUTL3 (aka. OST LA) but I can't get it to work so you just stick with Flash Tool v5 from MediaTek and you'll be good.
Link:
The nb0 ROM (Security update around May 2018): https://drive.google.com/file/d/1XqwEAGG7GMaspzV2J_yzCxnRei8zsOJd/view
(Source: https://romprovider.com/2018/09/nokia-1-ta-1060-firmware/)
nb0 extractor, requires java installed (If extracting hurts your hard disk performance aka. frozen or lag. Don't worry, It actually works, DON'T DO ANYTHING. It will notify you once it's done.): https://forum.xda-developers.com/general/general/tool-unpack-repack-nb0-rom-t3495091
Smart Phone Flash Tool from MediaTek: https://spflashtools.com/
My fixed scatter file that actually works from nb0 file: https://drive.google.com/open?id=1gRoADGHBm4vIAw3NeDyc_h9QWj12XUrC
And don't use twrp for wiping the phone. Use "fastboot -w" to wipe or use stock recovery.
TWRP will wipe the data parition but in ext4 format and make the phone bootlooped. We need f2fs in order to make the phone's /data partition run correctly. (Unless you know how to make the phone not having encryption flag when booting up every first time. Or modify TWRP to wipe the /data partition with make_f2fs and not make_ext4 app. Or using make_f2fs in recovery to directly wipe /data partition over terminal, the actual partition is in /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata.)
Or you just do this (I'm not tested it yet): Google "twrp f2fs format"
Click to expand...
Click to collapse
Thanks for your comment. I have recently bought that version (TA-1047) and I see that is more complicated to root it securely than I thought… Your comment gave me hope to try it. So, could you please say me if it is posible to do it without breaking it? I will read your comment when I have more time but I thank you for it!
As I see there is only stock rom for TA-1060 version, but as you say it is posible to recover it in case of breaking it, isn't it?
Thanks. :fingers-crossed:
pabloluih said:
Thanks for your comment. I have recently bought that version (TA-1047) and I see that is more complicated to root it securely than I thought… Your comment gave me hope to try it. So, could you please say me if it is posible to do it without breaking it? I will read your comment when I have more time but I thank you for it!
As I see there is only stock rom for TA-1060 version, but as you say it is posible to recover it in case of breaking it, isn't it?
Thanks. :fingers-crossed:
Click to expand...
Click to collapse
It's really easy to root the phone actually. Just unlock bootloader, install twrp recovery and install magisk.
And if you broke the phone's ROM. Just bring it to Nokia. Or flash it by yourself with the ROM I linked above by SP Flash Tool software.
Anyway the ROM is universal. So any variant of the phone can be flashed. (Proves that the elabel partition has 5 certifications images for 5 different models)
Just take sometime and read my words there.
kutiz21 said:
It's really easy to root the phone actually. Just unlock bootloader, install twrp recovery and install magisk.
And if you broke the phone's ROM. Just bring it to Nokia. Or flash it by yourself with the ROM I linked above by SP Flash Tool software.
Anyway the ROM is universal. So any variant of the phone can be flashed. (Proves that the elabel partition has 5 certifications images for 5 different models)
Just take sometime and read my words there.
Click to expand...
Click to collapse
Many thanks! At the moment I achieved to root it with twrp. OEM unlock > installed twrp > fastboot -w > magisk.
At the moment all is okey but I have not been able to unencrypt DATA partition (I have done fastboot -w, but with no success, I have not tried TWRP format because of your advice). That's the only point I can complain about.
I hope I do not have to use the stock rom to unbrick, but I have your advice if I do.
Thanks again!
pabloluih said:
Many thanks! At the moment I achieved to root it with twrp. OEM unlock > installed twrp > fastboot -w > magisk.
At the moment all is okey but I have not been able to unencrypt DATA partition (I have done fastboot -w, but with no success, I have not tried TWRP format because of your advice). That's the only point I can complain about.
I hope I do not have to use the stock rom to unbrick, but I have your advice if I do.
Thanks again!
Click to expand...
Click to collapse
That's weird. If you unlocked the bootloader and install adb/fastboot (must be latest version. Older version will not recognize the phone, download platform-tools from google dev site, don't download adb tools off XDA) + Nokia's driver from emulated CD drive (every time you plug the phone to computer with official rom, you'll see it) properly then it should be able to work.
You need to check the fastboot device driver Device Manager (devmgmt.msc) and see if the driver is properly installed yet.
You can only use "fastboot -w" once the bootloader is unlocked. And booting up the phone. It will say the bootloader is in Orange state.
You need to unlock oem bootloader from developer settings when the stock rom is there. And in fastboot too
Here is how you unlock it:
Enable oem unlock from dev settings
Then reboot to fastboot mode (bootloader)
Do this:
"fastboot oem key "serial number string converted to md5, not imei strings" "
"fastboot oem unlock"
Volume up
Then you are actually unlocked the bootloader.
Unlock from developer settings only will not do the trick. It only allows you to have ability unlock the bootloader in fastboot.
If you stuck on the Encryption unsuccessful screen. Try wipe it with stock recovery or "fastboot -w" (if you properly unlocked the bootloader)
If you think you can't do anything anymore. Just flash the ROM provided you above.
If you need the extracted ROM for SP flash tool and the fastboot driver. I can link it to you.
Most of all drivers will automatically install off Windows Update if you're on Windows 10 (except the fastboot driver, and yes. SP flash tool drivers are also provided by Windows 10 too)
Also. You should update the phone to the latest software update when flashing stock rom too. Because newer builds for this phone is compatible-friendly with GSI rom (Treble ROMs like AOSP Android 9 or 8.1 by phhusson)
Updates on Android 9/10
pabloluih said:
Many thanks! At the moment I achieved to root it with twrp. OEM unlock > installed twrp > fastboot -w > magisk.
At the moment all is okey but I have not been able to unencrypt DATA partition (I have done fastboot -w, but with no success, I have not tried TWRP format because of your advice). That's the only point I can complain about.
I hope I do not have to use the stock rom to unbrick, but I have your advice if I do.
Thanks again!
Click to expand...
Click to collapse
Nokia might harden the security of the device so you can't use Magisk on stock rom.