I guys I lost the imei of mine moto e2(otus)
I used the command "fastboot erase all"
Can anyone help me to recover imei.
I don't have any backup.
Pls help me out
Related
Guys,
Recently I posted a thread saying that I could not get my device to boot up.
My device is a XT1521-Moto E 2015 RETASIA LTE variant(surnia)
Now I have successfully managed to get the phone booted up.But now the problem is that my IMEI is showing 0(slot 1) and Invalid(slot 2).
I am running stock 5.1.1 RETASIA.
The reason for this is that I accidently ran the 'fastboot erase all' command.
Things I tried:I switched the phone to DIAG mode,downloaded the qcn file from the device through QPST but I can't find the hex IMEI from the qcn file.
Any help for restoring my IMEI would be highly appreciated.
Guys,
Recently I posted a thread saying that I could not get my device to boot up.
My device is a XT1521-Moto E 2015 RETASIA LTE variant(surnia)
Now I have successfully managed to get the phone booted up.But now the problem is that my IMEI is showing 0(slot 1) and Invalid(slot 2).
I am running stock 5.1.1 RETASIA.
The reason for this is that I accidently ran the 'fastboot erase all' command.
Things I tried:I switched the phone to DIAG mode,downloaded the qcn file from the device through QPST but I can't find the hex IMEI from the qcn file.
Any help for restoring my IMEI would be highly appreciated.
Hi
I want to know that if my phone is dual sim phone then why only one IMEI number is shown in fastboot getvar all
Also I am not able to use any sim, I have again flashed stock marshmallow and the IMEI are showing 0 for both sims
In the past i have flashed roms for single sim and have flashed some different custom roms as well
So what I think of it now is that, maybe my variables list is for single sim phone (imei), for dual sim it must be like imei_1 and imei_2 and the rom is searching for these variable and they are not found and hence showng 0 ?
So what is the solution to this problem ?
PS : I have no backup of .nv_data or efs if you are about to ask such question. I have both IMEI numbers on the box as well as on the phone.
Any help is appreciated !
Thanks
Good that you have the IMEI numbers. For starters, download the latest Stock ROM for your phone and boot to Bootloader/fastboot mode.
Code:
mfastboot erase modemst1
mfastboot erase modemst2
Then try to install the full Stock ROM using instructions available in the forums, then test out and see if it works. If it still does not work, then install QPST (instructions available in the forum to install and connect your device)
USE CAUTION when writing NVRAM, you can write any junk and there will be no warning sign. From hereon, make notes of whatever you do !!
Once the device is connected, dump a local backup of NVRAM to your PC. Then locate the ID number for IMEI (could be 550, good to confirm though cause am not sure about dual IMEIs) then you need to update the IMEI number in a specific format (ensure you're entering them as HEX), if you read through the forums, you should find the correct sequence, starting from the 2nd digit, you basically reverse the digits.
Once this is done, and you restart out of BL mode, most likely your phone should be back up and running. Proceed to run a full Stock flash and hopefully you're up.
I'm giving you top level instructions on what to do, because you need to do a lot of research before messing with NVRAM values and during your course of locating all the info I've asked you to look for you should find them.
Cheers !
Guys, I need help becau wr se I'm desperate. I accidentally used the format + ALL in the SP flash tool and now my IMEI is 0000000 ..., I already tried several methods to try to solve (malimeta, SN writer, adb terminal etc.) but none solved my problem. I came here to ask you that it has the same version (xt1754) if you can give me your backup of imei or nvram.bin, please help me, I need this smartphone
I had bricked my phone. then I flashed it using SP Flash Tool with "Format + Download" option. then I saw that there is only one IMEI showing at that one too was null. after that I tried Lenevo Moto Smart Assistant and here also I got the same. Now, I used SN Write Tool to write IMEI details. After choosing Dual IMEI option, I eneterd both IMEI original. But still I see that there is only one IMEI showing in my phone and still no option for IMEI2. And with one IMEI, it supports only one SIM card. Please help me to recover IMEI2 option... so that I can use both SIM cards.