Hi xiaomi users
if you bricked your mi5 after wrong flash or something went wrong and you not able any more to start you device normaly, so you'r in the correcte thread to unbrick your mi5 with the correcte fastboot rom and miflash beta
whatever the cause of bricking your device( in my case no boot, no recovery mode and no fastboot mode just black screen),if it connected to your laptop and show qualcomm QHsusb QDloader 9008 in devices manager then you have big opportunity to make it alive again :fingers-crossed:
1 :
download and install xiaomi flashing tool miflash beta frome here : http://en.miui.com/forum.php?mod=at...jYmIxNDZifDE0NjYzMTc1OTZ8MzEyNzU5MnwyODE5Nzk=
2 : download the correct fastboot rom for your xiaomi mi5 from here : http://update.miui.com/updates/v1/fullromdownload.php?d=gemini&b=X&r=cn&n=
note: i have chosen the latest china dev fastboot rom to unbrick my mi5,other fastboot roms not worked for me
put your fastboot rom to c/ drive and extract it ,not on desktop or other extension
3 : enter on fastboot mode by pressing power and volume down you will see logo of xiaomi its fastboot mode,if you cant access fastboot mode just connect you mi5 to your laptop it will detect it as qualcomm driver
4 : open miflash beta and check flash all,chose you rom in c drive then clik refresh button you will se your device as com port,now start flash by cliking on flash button and be patient it will take over 5 min, when success unplug your and start your phone,if not start just let it connected to your laptop over 30 min it will start automatically
now enjoy your mi5 with latest miui8 china developer,
hit thanks buton if im help you :good:
Hi guys, i was trying to flash a global stable rom with edl and miflash but something went wrong and miflash says that memory was unsifficient. What should i do? I'm on windows 10 64bit with all adb installed (i think). I even disabled the driver license. I didn't do nothing since the error and i don't know if i should unplug the cable or whatever.
hey, it says flash done (sucessful), but my phone still with black screen and nothing happens, should i just wait?
Hi guys, im not sure if this will help you or not but my phone bricked last night and ive manage make it work again by following this method but it little bit different so when it my phone successfully flashed, i just left it untill the batteries is empty by left it all night (before bricked the batteries was 50% i think), maybe it will take longer then mine and if this method work it showing battery empty indicator like normal phone.. ps: when my phone bricked i had no fastboot no recovery no edl, just black screen and red light indicator.. good luck guys
i have used the test point method and successfully flashed the latest Rom V8.5.2.0 with the latest MiFlash 201612220. after flash done, the phone still cannot turn on... anybody can help???
1. If mobile is not boot up after flashing new miui both stable or beta rom using fastboot or recovery(twrp)
Then check bootloader it will relock unlock it using offical method
It you had unlocked bootloader unofficial method
Then flash the new fastboot rom from edl
2.miflashtool not detect edl mode
It happen because of
No proper adb driver and usb driver(plz install it again)
All driver are install but still edl is not detect then use deep flash cable(it will detect it)
3. What is deep flash cable plz refer google and youtube
https://www.youtube.com/shared?ci=IpVbp_tALjg
Note you can use copper cable to connect those two cable
4, after updating from lollipop to Marshmallow
Fingerprint not work (plz setup fingerprint again)
Still not working or slow mobile or reduced sot
Plz factory reset(but remember your mi account password and backup your data and internal stroge)
5.can i flash miui 8 global beta MM to Miui 8 global stable MM 8.1.1.0 using twrp
Answer is yes (already tried) but don't try with miui 8 MM to LP
6 after every reboot fingerprint not working
Due to Google new policy you need to enter you password for 1st time every reboot
Hit thanks button if i help
hello I flashed my mate 10 pro to pie rom and everything works. but I flash magisk 16 from twrp and now my phone don't work any more I flash kernel back to but now he reboot evertime to e-recovery but I can not download new rom from wifi.. my bootloader is unlocked frp unlock, to I try dc phoenix but no luck I get this
Looking for a device in fastboot mode
Device found: AQH7N17A27005761
9-12-2018 19:06:54 Starting to write device in FASTBOOT mode...
Device found: AQH7N17A27005761
Cannot get IMEI from device
Build number: :BLA-L29 9.0.0.161(C432E4R1P11)
Product model: BLA-L29
Batery state: 6485mv
Device not supported
Process was cancelled by user
how I can reboot this phone again,.
thanks a lot for the help
you cant just install a rom.img in fastboot mode?
Success is disgusted by some people, and will not share any files for free in the future.
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
johnny886 said:
In China, this Phone is called Nubia Play, and the Global version is called Redmagic 5G Lite,
but the mobile phone model is NX651J. Generally speaking, the two are only the difference in ROM.
This is the edl firmware of Nubia Play,CN version.which can repair your phone in edl mode.
All the files are from the official package without any modification!
How to do?
1.Open XiaoMiFlash.exe in the MiFlash folder
2.Click the select button to select the images in this firmware
3.The phone enters edl mode and connects to the computer with a usb cable
（If your phone is in edl mode (9008 mode) for a long time, you must long press the
power button volume + and volume-keys to force the phone to power off, and then re-enter edl mode）
4.Click Loading and see the COMxx that appears, indicating that your phone is connected. Then click Flash
5.Then just wait, prompting flash done！sucess! It means that the flashing has been completed,
long press the power button to restart the phone!
When you see the green notification light next to the front camera light up,
you can release the power button.
Good luck！Enjoy it！！！
Download link：
https://mega.nz/file/eNkVSA6T#2yN_JHtOxB_K4NHVTF3qT_asMMFtnEKBQ6sQ8b-y2nU
Click to expand...
Click to collapse
Only spanish?
GSM KING MAKER said:
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
Click to expand...
Click to collapse
Is global rom? Only spanish?
thequellu said:
Is global rom? Only spanish?
Click to expand...
Click to collapse
Its Not Global Rom , Only Chinese Firmware !
Why do I use scarlet letter when I use flash
The brick tool has worked on a few occasions ,thank you for that but now I need more help or suggestions, when playing between the Spain ROM and China version I lost the baseband and IMEI.Then I thought,locking the bootloader back would help obviously it did not work. Now even though I flashed the unbrick tool though miflasher edl mode I am stuck with a blank screen after the Nubia logo and port Qualcomm 900e in Windows device manager.
Tried already via recovery to flash an update China version or Spain version they flashed fine however still same scenario after Nubia logo.
Not sure what my options are.
Does this work for updating or just brick?
DargorDG said:
Does this work for updating or just brick?
Click to expand...
Click to collapse
It does work to fix the update errors and then use the OTA or USB Otg method
@johnny886
Thank you for the tool.Just wondering if there is a version for Android 11 as i updated to 3.16 android 11 firmware via the usb and now I get your device is corrupt.
Obviously my problem dates back to unlocking and then relocking the bootloader which somehow bricked the phone. Even though before relocking the tool worked once the bootloader was locked the phone wasn't able to boot into system but I was not getting the device is corrupt.
I am hoping for a way to unlock the bootloader or to be able to get back into the system to tick the option in the developer settings hence I am keeping my hope for an updated unbrick tool.
I donwload the file and uncompress it, when select the folder with XiaoMiFlash is shows "could't find flash script".
There are no flash_all.bat file on folder
any help, where is that file?
(mega interrupt the download process)
@ecatombe1234
In my case said the same with regards the script but had flashed fine once started.
Just be careful if you have the bootloader unlocked do not lock it again with the fastboot flash lock.
Thanks for you, really soon, response.
Yes, I try, put phone in edl mode, refresh, flash, and recive [... COM8]:ERROR_UNSUPPORTED_TYPE 0
@ecatombe1234
Usually this is down to the drivers used for Qualcomm Edl mode. Have you installed them ?
Is the EDL mode phone recognized in the device manager as Qualcomm??
Yes, I have correct drivers, I restored the phone last year, but not now.
Xiaomi tool detects phone in bootloader and in edl mode.
Windows detect phone in edl mode as: Qualcomm HS-USB QDLoader 9008 (COM8).
I tried with QFiL too, but I am not sure the config to work qith this, because it detect mobile in edl mode.
Any way, Xiaomi tool has very few config options, I can's understand the "could't find flash script", can any one give us ligth about this error?
It was xiaomi flash tool version, I tried a lot, finally this one works, it is the only one that works with corrupted android 11 version.
Download Xiaomi Flash Tool- v20210226
Mi Flash tool is meant for all Qualcomm powered Xiaomi and Redmi phones on which you can flash MIUI Fastboot ROMs. It works over the Fastboot connection to erase and…
droidfilehost.com
That will work to my dead boot nubia paly 5g?
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Helo guys.. How can I downgrade from android 11 back to android 10 on this device? I recently updated my software but It is not stable yet. Certain apps for example PUBG mobile keep crashing whenever I try to launch it.
Mitchpop said:
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Click to expand...
Click to collapse
I've been following your discussion on this thread and had the same problem after ota update to 3.16.
I also had initially difficulty flashing with MiFlash but finally it worked.
I immediately pressed the flash after entering EDL mode
My phone flashed and entered the Chinese mode. I then went to bootloader by hard pressing the power button and Vol down key.
In bootloader I entered recovery which allowed me to update using OTG. I used a flash with USB C and loaded the phone with NX651J v 22 and my phone is back to the previous settings.
I have Redmi note note 5 pro and I rooted my device successfully on the version miui 11.0.3.0 with twrp recovery
and after root my device is unable to connect with any pc and laptop (tried everything from trying on multiple pc to buying new usb cables)
But It doesn't bothered me so I did nothing about it...but yesterday I tried to update my device to version miui 11.0.5.0 using full recovery rom but due to that my root access is gone with installing stock recovery .
And now every time when I try to enter into fastboot mode, it is not detecting my device (I've tried installing fastboot adb drivers and once again tried changing usb cable but it still not detecting).
Please help me I only want to install any custom recovery which help me root my device
Device - Redmi Note 5 pro
Android version - 9
Miui version - 11.0.5.0
USB debugging is on
bootloader is unlocked