I've tried to install a few programs on my 4 gig microsdhc card. For example iGo8 starts only a few times, then crashes. When I explored my card there were 2 folders named iGo8. I formatted the card and installed a newer version of iGo8, and same thing happened: after a few starts(working perfectly) it crashes.
The exact same iGo8 works fine with 1GB microsd.
I've tried also installing M2DC, the effect was slowing down the device, so i had to uninstall. The same with top bar customizing cabs.
PLS HELP!
I've found the solution for the nonworking card:
Hard SPL the device
Installed RuRo v.1.1 ROM
Now it's working fine!
Hey,
I have the same 4GB Micro SDHC card. Mine is working fine with music and programs being installed and run from it. I'm not sure what could be done to help fix the problem. Maybe windows update?
Hallo,
I have the same 8GB Scandisk Micro SDHC card,working fine.
levrek said:
Hallo,
I have the same 8GB Scandisk Micro SDHC card,working fine.
Click to expand...
Click to collapse
The same in my case, no problems over more than 6 months.
Link to card: http://www.amazon.de/SanDisk-Micro-...=sr_1_9?ie=UTF8&s=ce-de&qid=1255621177&sr=8-9
I have the 4gb micro sdhc as well. I was using it in a Nokia e71 but when I purchased the motorola backflip it didn't work. It was during this time that I noticed that I didn't have the average micro sd card. Upon recognizing this, I bought the san disk micro card reader for hc but when I insert the card into the reader using my laptop (windows 7), it freezes when I click on the reader. I have not been successful with trying to retrieve the data other than putting the card back into the nokia e71. If I could find a solution with just getting the card to read on the computer, I can try reformatting the card. Pease Help if you know of a solution.
It is a timing problem on the interface level
Hi,
when I bought my fist 3G, I've tried it with a 8GB µSD Card and I've seen the symptoms described by other user (freeze problem, very very slow motion, ...). Without µSD card, it was working perfectly.
I was sure this µSD card was working fine in a HTC HD, so I tried a slower µSD card and it was working again. But because I was unhappy with the fact that I had to slow down the 3G (by using a slower card) to get it working, I've tried to find other 3G to try my SD card... and finally, I tried it in 11 HTC 3G (that was "working" according to their owner) and on 3 of them, the SD card did not work!
So, I've exchanged my 3G and with the new one, my SD card is working perfectly.
Conclusion:
During the electronic design of the HTC 3G, the µSD interface timings were borderline. So, if you are lucky, your model supports fast µSD card, if you are not, you have to buy a slower µSD card or try to exchange your HTC 3G. Anyway, it is not a "critical" problem because it has a simple solution... But for sure, everybody prefers to be lucky
Good luck
solution for your SD card
format your 4GB SD card in FAT32, it should work I think _ ^ let me know!
I think you should fix it by these steps:
1. Replace your sdcard by another one and see if it works well or not
2. If the new one works well, then you need to change your card
3. If the same thing happens, then try to change your application or install a higher version of it
4 gig hd card
solved the problem on xperia x1
1. format in NFT
2. problem solved
what that about can anyone explain?
I purchased an 8gb Micro SD card for my HD2 but seem to be having all sorts of problems trying to get Android builds running from it!
The card is a 8GB MICRO SD HC SDHC (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230511127179) and it struggles to either load the firmware or carry on running it if it does load up.
If I then put the firmware on the 2gb card, that came with the phone, it will load up fine and continue to run without any problems. The only difference, other than size, is that the 2gb card doesn't appear to be a 'HC' card. Is it this that is causing the issue? Have I purchased a card that is too fast/too slow for the phone or shouldn't it matter?
Thanks in advance for your advice on this.
I have a xperia x10a from AT&T running a generic android 2.3.3 os (since AT&T will not allow anything past 2.1) and it is rooted as well. I have a 32GB micro SD card class 4 that is unbranded. The SD card works great in my computer but will not recognize in the phone. I have tried reformatting the card but it still will not see it. Any ideas?
Have you tried reformat it in phone? Even some no-name sdcard couldnt be recognised in some phones...
I have 32GB Lexar class 10 card and without problems.
Hi, I just recently bought a Sandisk 32GB card and have it reformated before transferring it with music and videos. All is well, I can play all of my music but randomly, the music player will stop playing and I can't access the contents of the SD card anymore unless I reboot the phone. Tested it with H2testw and its genuine. Is there any way to fix this?. TIA.
Sooo, I am NOT the only one who has this problem.
Yes, this happens for me, too, with a class 10 Samsung 16 GB SD Card.
Just yesterday the card also lost files when this happened. Checking the SDCard revealed no problems whatsoever.
So now I wonder: Is the card reader not okay, is it a compatibility issue between certain cards and the S III or is it a firmware bug.
Format the card via windows as FAT32 may fix problems .
jje
screw...think im having one such problem now....anyone knows how to solve it?
Backup your files and format it again
Its recommend to use samsung sd card
Its very fast calss10 and designed for samy android devices.
Sent from my GT-I9300
Same problem for me... thougt it was CM10 problem but no, have same problem with Omega rom.
Formatet it multiple times with diferent systems. Having problems with pictures too, I only see 1 folder out of 5 :/
Hi guys
I just installed Cyanogen OS CM12.1 nightly 20160203 to my Xperia Z2 tablet SGP521 (the one with LTE)
after i thinkering with it for a while, i just realized that there isn't any microSD installed
so i pulled out the card and try to figure out what is wrong
I googled and find some answers but none of them is working for me
I tried to change the filesystem format to FAT32 with 3 different programs (acronis disk director, ease us partition magic, and dos version formater) and none of them is working.
my card is a exFAT file system
I'm very sure that my card is not a fake one (it is a sandisk ultra 64 gb microsdxc class 1)
I can read it from the card reader and it shows all the files inside but i cannot write to it and it is not showing in my tablet
Any idea what else to do to fix this?
Thanks guys