Hello Everyone..
Please.. I need your help. I have a cubot note s and i tried to update it using the wireless update in the phone itself.. But when i updated it, error pop up and then i turned off my phone but its just stuck. I already did a factory reset and wiped cache but its still the same. Please??? Help me... Thank you
try installing these drivers (universall) first, then use SP flash tool
MT6577 USB VCOM drivers
bolotz25 said:
Hello Everyone..
Please.. I need your help. I have a cubot note s and i tried to update it using the wireless update in the phone itself.. But when i updated it, error pop up and then i turned off my phone but its just stuck. I already did a factory reset and wiped cache but its still the same. Please??? Help me... Thank you
Click to expand...
Click to collapse
You could adb twrp to the phone, and get a nandroid backup from somewhere.
Related
This is korean android phone, I receive this handset with error message on screen, then i do update software by software update manager, after update now stuck on ''TAKE'' and handset going something hot, how to solve this? can anyone help me please?
same problem fixed
somrat786 said:
This is korean android phone, I receive this handset with error message on screen, then i do update software by software update manager, after update now stuck on ''TAKE'' and handset going something hot, how to solve this? can anyone help me please?
Click to expand...
Click to collapse
hi there,
i had the same problem with kt tech take but accidentally found a solution with the help of mtkdroid tools... i installed it on our laptop then updated the adb driver... i openned the mtkdroid tools to test if it will detect the phone, and it did... then i reboot it in recovery mode(you'll see that on the lower right part of mtkdroid tools) then wiped user data and rebooted the phone... and it rebooted successfully...
hope this experience could help you somehow...
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Sp flash tools - formatted android phone
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
naxilla100 said:
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
Click to expand...
Click to collapse
Same case here but ny device boot, its just doesn't have an operating system as it is formatted
aliranan8 said:
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Click to expand...
Click to collapse
same case here , after formatting , phone won't power on or can't be detected by sp flash tools , please please please , even if i connect a charger it is still not charging , is there hope for my dead phone? my phone is a110
Give it to customer care or flash factory image
Sent from my One V using Tapatalk
phone revived
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Same Problem
I have also the same case and given to service center. I am afraid whether service center will consider it under warranty.
BTW, how did you revive your phone ? I am interested to know.
I have XOLO Q700.
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
How?
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
hey gay i saw your post saiyng that your phone is revived? how you got it? i have a phone dead for sp tools and want to reive it.
wt***
I have the same problem guys I just flash my spice dream uno (android one) with sp flash tool after the flashing my phone is not booting up even now s.p. flasher is not searching my phone.......................
what i have try
1. reinstall drivers.
2. reinstall sp flash tool
3. try it with battry and with out it
4.try to flash it with out virson of s.p. flash tool
5. use new data cabal
but nothing is working
if any one know how to resolve it please help us
:crying::crying: :crying: :crying: :crying:
i formated my intex aqua i5 by the sptools now my phone not detected in sp flash tool through usb i cant find a way to install a firmware again.
please help me ...........................
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
fwegsdfgdrg said:
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
Click to expand...
Click to collapse
check your pm sir, cz i can't post outside link right now, hope it will help you
I also have the exact same problem how can i fix my blu 5.5studio
fwegsdfgdrg said:
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
Click to expand...
Click to collapse
I have the same issue,my Samsung galaxy S 4 LTE SPH-L720T is stuck in Android System Recovery <3a> after installing the driver for 3D Pro. I have tried everything an no luck atall, PLEASE HELP!!!
abhoysm69 said:
check your pm sir, cz i can't post outside link right now, hope it will help you
Click to expand...
Click to collapse
hey brother.. will you sent me pm too???
please i need the tutorial to
bootloop
hey guys I've got the same problem delete files and boot loop help ...please..
Same problem with my BLU Studio 5.5S
it stuck on boot, but in my case, I think it has USB debugging enabled. Any help please?
hi, ,have you got solution to your problem? Im also have the same issue on my phone, ,is it possible to enable usb debugging on a stuck on boot logo? please help, ,thanks
same problem but on blu studio 6.0 hd
Sory if im posting in the wrong spot im new here. I dont have a pc. Im using a pcd chaser. Hello I have a problem with may blue studio 6.0 HD. I flashed a rom and the instructions sead no need to clear delvic or cache and now my phone is stuck in a bootloop and I can't get in to any mode to do a factory reset and I have it backed up on my SD card
ihave the same problem to sir my phone stuck on a boot loop can't turn off my phone
bahun said:
ihave the same problem to sir my phone stuck on a boot loop can't turn off my phone
Click to expand...
Click to collapse
Is there a way to go to recovery mode, do you know the key combination of your phone, can google
Endless boot look
I own a Blu Studio 5.5s and it is stuck on bootloop. I can not enable usb debugging, and recovery mode does not work for me. I accidentally deleted my "systems" file in my phone's hard drive. I went to a store, and they said I need to put a new update on my MicroSD card. Anyone know where I can get those, and how to fix this problem?
BLU ENERGY X bootloop
My BLU ENERGY X is stuck in boot loop with access to fastboot only... Any tips on how to solve this?
liverite1978 said:
I have the same issue,my Samsung galaxy S 4 LTE SPH-L720T is stuck in Android System Recovery <3a> after installing the driver for 3D Pro. I have tried everything an no luck atall, PLEASE HELP!!!
Click to expand...
Click to collapse
What I figured you can do is install your stock rom and flash it.
Having same issue with my phone but I have a moto g 3rd gen., Can't get into recovery settings and usb debugging is disabled, My phone is just stuck in bootloop
stuck in bootloop....coolpad dazen x7.......no usb debugging enabled......??? how to enable in bootloop???
Blu 5.5 Studio D690U same problem!
abhoysm69 said:
check your pm sir, cz i can't post outside link right now, hope it will help you
Click to expand...
Click to collapse
I fund the rom at needrom.com then used SPFlash tool to format and download the ROM no help at all in spite of the fact that the SPflash tool reported "success" (checkmark on green background). Any ideas? P.S. For the fellow that needs to know the button combo it is <power and vol up & down, all together > then follow screen prompts.
I am also in a bootloop. I have Blu Studio G Plus. I can't seem to find the stock rom for S500Q 02
Greetings, i need help from xda-developers hopefully someone have a solution for this problem,
My grandfather's vivo v3's software is bugging out and it wont boot up i tried to factory reset and clear cache in recovery mode but it just wont and if when it does after 5 seconds below it would shut off what should i do? Also the pc cant detect the phone because usb debbuging is not on ?
Any help would be awesome ?
Also this is my email in-case you need to contact me : [email protected]
Re-flash phone's Stock ROM. You use QFIL Flash Tool to achieve this. Requires Qualcomm's Android USB Driver got installed on Windows computer, too.
/
severing77 said:
Hi! I am new here and I hope that I choose right spot for posting a thread.
Would someone be kind to help me please?
I have Android Box A95X F3, never had any issue. This morning I made some stupid mistake and I installed Magisk on it which flashed and booted some image. After it finished and I restarted device, system disappeared (dead Android logo is on screen). I tried to wipe data and do factory reset, but every time I press reboot system now it goes back to boot screen with dead Android logo.
Same screen as here appear: https://i.ytimg.com/vi/7E81YRF9ieY/maxresdefault.jpg
Can someone help me and say what should I do?
I have some experience with booting custom ROMs on Android phones, but I am not sure how to fix this on Android Box.
P.S. For booting system external to the device, how can I connect it with my PC? Do I need macho to macho USB cable?
Thanks in advance
Click to expand...
Click to collapse
i think you can't repair the system better to flash it using the usb burning tools and the last firmware for your box format img
SlamD said:
i think you can't repair the system better to flash it using the usb burning tools and the last firmware for your box format img
Click to expand...
Click to collapse
Can you give me guide to flash my a95x f3 air!!
SlamD said:
i think you can't repair the system better to flash it using the usb burning tools and the last firmware for your box format img
Click to expand...
Click to collapse
Hey friends,
Have you got any solution for this.
Because same thing happened with my A95x f3 box. I tried flashing rom by using burning tools but. Some error comes after 1 % process. May be I am flashing wrong image.
Can some please guide me where I can get correct from
Thanks