Hi,
i just got i747 Galaxy S3 from Bell i would like to root and unlock it.
I also i have figured out that the CM8 for i9300 is not compatible with i747.
Is there a ClockworkMod version for i747 available?
Can it be rooted and unlocked?
I would like to use it on Fido.
thank you.
I cannot find any tutorial how to root and unlock i747.
Thanks.
I am afraid there is nothing for the I748 version yet.
Only the international version had root so far.....
I am afraid you are going to have to wait.....
EDIT :
Try this,
http://www.youtube.com/watch?v=xNB-cJoittU
i got the phone rooted but i haven't found any solution to unlock the phone i747
hope there is something soon
indianx said:
Hi,
i just got i747 Galaxy S3 from Bell i would like to root and unlock it.
I also i have figured out that the CM8 for i9300 is not compatible with i747.
Is there a ClockworkMod version for i747 available?
Can it be rooted and unlocked?
I would like to use it on Fido.
thank you.
I cannot find any tutorial how to root and unlock i747.
Thanks.
Click to expand...
Click to collapse
same boat as you. Have a phone from Virgin and got it rooted but waiting on an unlock so that i can use it with fido.
indianx said:
i got the phone rooted but i haven't found any solution to unlock the phone i747
Click to expand...
Click to collapse
Try,
http://www.youtube.com/watch?v=j0Y6wwQkOTQ
or
http://www.youtube.com/watch?v=-d5czc9rU48
nishant_713 said:
Omfg, and i started to think that i was rather in the wrong section.
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
Found this post here at the unlock section says coming soon
http://forum.xda-developers.com/showthread.php?p=28271086#post28271086
[email protected] said:
Try,
http://www.youtube.com/watch?v=j0Y6wwQkOTQ
or
http://www.youtube.com/watch?v=-d5czc9rU48
Click to expand...
Click to collapse
Thanks a lot. i have downloaded the tool. My virus app detected to viruses and the version on the video says 0.0.0.6 and the download version is 0.0.0.5
Think have to wait.
edit: wrong forum - please ignore
bluezz said:
So I'm assuming that currently there's no way to sim unlock an i747m for free then.. right?
Also, I noticed Bell and Rogers are i747m and Telus is i747d. What exactly is the difference between the two?
Looking at this post:
http://forum.xda-developers.com/showpost.php?p=27938452&postcount=2
Is it safe to assume that I can buy any unlocked Bell/Rogers/Telus Galaxy S3 from kijiji and expect LTE to work on Rogers correct?
Click to expand...
Click to collapse
If iam not wrong there is no hardware difference between those i747's mostly it's the software which makes the difference.
My concern is more now should i sell my Bell i747m or not? Cannot use the phone at all since iam on Fido. I would rather buy then the international i9300 Galaxy S3 rather spending 33$ to unlock the phone.
I can sell it then for the same price and buy then the i9300.
Iam not sure if its even possible to unlock the i747m at all via a app or patch. I cannot find any info about it
I got Bell S3 as well and so far I747M model dont have this nv_data.bin file for unlock. But someone already send the Bell file to developers so they can come up with the unlock app. : (
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=180992127295&ssPageName=ADME:X:AAQ:CA:1123
I got my Bell s3 unlocked with this guy. So when you buy his service from ebay, he then will send you an email what tools you need to download and install ( teamviewer and usb redirector). Also if you are lucky, he will reply to you immediately and letting you know that he is onlin. Make sure you have different sim card. Pretty easy instruction. : )
I don't know why people are okay with these ebay sellers/unlock sites, most of them are illicitly accessing the handset manufacture's database and billing you for it, unfortunately telus has a $50 unlock fee for no reason other then that they can. If anyone could create a free sim unlock solution we would be much better off, lets stop looking for the best of the worst in these expensive unlock codes and just wait for the excellent devs to come up with a solution, I just feel dirty supporting those people... Anyone agree?
Unlock
Hello XDA members,
This is my 1st post on this website. I just wanted to let you know that the I747 from AT&T Galaxy S3 (locked) that I bought from eBay (which was new btw) was unlocked via software that I paid from this site called Unlockclient.com and it works. It took less than 5 minutes to permanently unlock my phone. It has all the versions of the I747/M/R. Thank you all for this awesome website.
[ QUOTE=indianx;28216065]Hi,
i just got i747 Galaxy S3 from Bell i would like to root and unlock it.
I also i have figured out that the CM8 for i9300 is not compatible with i747.
Is there a ClockworkMod version for i747 available?
Can it be rooted and unlocked?
I would like to use it on Fido.
thank you.
I cannot find any tutorial how to root and unlock i747.
Thanks.[/QUOTE]
jimmar48 said:
Hello XDA members,
This is my 1st post on this website. I just wanted to let you know that the I747 from AT&T Galaxy S3 (locked) that I bought from eBay (which was new btw) was unlocked via software that I paid from this site called Unlockclient.com and it works. It took less than 5 minutes to permanently unlock my phone. It has all the versions of the I747/M/R. Thank you all for this awesome website.
[ QUOTE=indianx;28216065]Hi,
i just got i747 Galaxy S3 from Bell i would like to root and unlock it.
I also i have figured out that the CM8 for i9300 is not compatible with i747.
Is there a ClockworkMod version for i747 available?
Can it be rooted and unlocked?
I would like to use it on Fido.
thank you.
I cannot find any tutorial how to root and unlock i747.
Thanks.
Click to expand...
Click to collapse
[/QUOTE]
# If you trouble yourself to start at the beginning of this page and read the stickies you will come to the conclusion that you are not the owner of I9300 and this is I9300 forum .
I9300 firmware will brick a non I9300 model .
jje
Just question
This is My first post on this site, as i also have a Galaxy S3 (SGH I747). that I bought off E-Bay , I am trying to switch from one service to another, But need to Unlock from main carrier. any help??? I would appreciate it thanks
ChiefBigToe said:
This is My first post on this site, as i also have a Galaxy S3 (SGH I747). that I bought off E-Bay , I am trying to switch from one service to another, But need to Unlock from main carrier. any help??? I would appreciate it thanks
Click to expand...
Click to collapse
Why don't you read the post immediately before yours!
ChiefBigToe said:
This is My first post on this site, as i also have a Galaxy S3 (SGH I747). that I bought off E-Bay , I am trying to switch from one service to another, But need to Unlock from main carrier. any help??? I would appreciate it thanks
Click to expand...
Click to collapse
This worked fine for my Galaxy S3 (SGH-I747)
http://forum.xda-developers.com/showpost.php?p=34661189&postcount=1
Hello,
I bought Galaxy S4 Verizon but I need to install international Galaxy S4 Stock rom on it. Is it possible? I don't need to run Verizon rom because when I insert international sim then the question mark sign always shown in task bar. Please do help me on this issue. I know you experts give me some way to do it.
aibak said:
Hello,
I bought Galaxy S4 Verizon but I need to install international Galaxy S4 Stock rom on it. Is it possible? I don't need to run Verizon rom because when I insert international sim then the question mark sign always shown in task bar. Please do help me on this issue. I know you experts give me some way to do it.
Click to expand...
Click to collapse
You can't flash the International ROM unless your phone is running the MDK bootloader.
I recently unlocked and rooted my AT&T Galaxy S5 to use on T-Mobile network. However I still have AT&T firmware on the phone, and I'd really like to flash cyanogenmod, or at at the very least stock T-Mobile. Is there any way to do this? Thanks in advance!
Demeos said:
I recently unlocked and rooted my AT&T Galaxy S5 to use on T-Mobile network. However I still have AT&T firmware on the phone, and I'd really like to flash cyanogenmod, or at at the very least stock T-Mobile. Is there any way to do this? Thanks in advance!
Click to expand...
Click to collapse
Don't know if there is a Cyogenmod available for your model (SM-G900A) but there is an AllianceRom which is built off the T-mobile SM-G900T firmware which will work on the AT&T S5. However, since that version of the S5 has a locked bootloader you will need to use Safestrap Recovery instead of TWRP. You might want to look among the threads in the AT&T S5 area of this forum for more information and maybe ask your question there. I brought my unlocked AT&T S5 over to T-mobile and used it for a few months before getting a T-mobile S5. AT&T stock s5 firmware worked fine. I also did try out AllianceRom on that phone briefly but stick with stock. I don't think rom slots ever got fixed on Safestrap so only the stock rom slot could be used for flashing which is one of the reasons I chose to stick with stock on that phone.
..
How do I permanently remove the AT&T logo and bloat? [Galaxy S9+ AT&T Model SM-G965U]
MODEL: Galaxy S9+ AT&T SM-G965U
This is the first time using android, I'm from iPhone. Recently got an S9+ from the used section of Amazon and want to remove all of the AT&T bloat since I'm on Tmobile anyway and it's so tacky. Is there a good guide on how to do this? Can someone help me get started? Thanks.
terda12 said:
MODEL: Galaxy S9+ AT&T SM-G965U
This is the first time using android, I'm from iPhone. Recently got an S9+ from the used section of Amazon and want to remove all of the AT&T bloat since I'm on Tmobile anyway and it's so tacky. Is there a good guide on how to do this? Can someone help me get started? Thanks.
Click to expand...
Click to collapse
You can cross-flash the device using modded or patched ODIN to convert your S9 Plus to U1 first after fully wiping, then flashing it to the T-Mobile firmware if you happen to want all of the T-Mobile bloat. If not, then just flash to U1. There are plenty of instructions with links on how to do so around here.
I've found a lot of different tutorials but not sure which one to trust exactly. I'm new to Android and don't want to brick my phone so is there a good detailed tutorial for this?
terda12 said:
I've found a lot of different tutorials but not sure which one to trust exactly. I'm new to Android and don't want to brick my phone so is there a good detailed tutorial for this?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884
This link might help you.
I bought and unlocked Galaxy S7 to get service on Tmobile network and the phone works fine but is an AT&T phone with
all the accompanying bloatware. I am in a bad cellular area for tmobile and depend on wifi calling as the signal is very weak.
The wifi calling on my purchased phone is grayed out which i found out through forums that AT&T has something to do with this.
I decided to root my phone and load firmware to Tmobile but have only found the process and firmware SM-G930T and not SM-G891T. The phone currently has SM-G891A, which is AT&T 's firmware. Baseband version G891AUCS4DRK1. I haven't been to find the right firmware for my phone. Can anyone help me? Thanks
ghat01 said:
I bought and unlocked Galaxy S7 to get service on Tmobile network and the phone works fine but is an AT&T phone with
all the accompanying bloatware. I am in a bad cellular area for tmobile and depend on wifi calling as the signal is very weak.
The wifi calling on my purchased phone is grayed out which i found out through forums that AT&T has something to do with this.
I decided to root my phone and load firmware to Tmobile but have only found the process and firmware SM-G930T and not SM-G891T. The phone currently has SM-G891A, which is AT&T 's firmware. Baseband version G891AUCS4DRK1. I haven't been to find the right firmware for my phone. Can anyone help me? Thanks
Click to expand...
Click to collapse
Are you sure you didn't confuse device version with firmware version? SM-G891A
Is not a firmware, it's your phone model, which is of course galaxy S7.
But anyway, there is not Tmobile firmware for that model. Only 930T as you said.maybe could be possible to port the rom.
Can I use the firmware for the sm-g930t on the sm- g891a
eduardvi995 said:
Are you sure you didn't confuse device version with firmware version? SM-G891A
Is not a firmware, it's your phone model, which is of course galaxy S7.
But anyway, there is not Tmobile firmware for that model. Only 930T as you said.maybe could be possible to port the rom.
Click to expand...
Click to collapse
My question is, can I flash the rom on a sm-g891a with firmware for a sm-930tin
ghat01 said:
My question is, can I flash the rom on a sm-g891a with firmware for a sm-930tin
Click to expand...
Click to collapse
I wouldn't recommend to flash it yet. Processors should be the same, as well as the screen size,for flash a different rom.
eduardvi995 said:
I wouldn't recommend to flash it yet. Processors should be the same, as well as the screen size,for flash a different rom.
Click to expand...
Click to collapse
All the components are the same except for the battery size, hardened case and shatter proof screen
ghat01 said:
All the components are the same except for the battery size, hardened case and shatter proof screen
Click to expand...
Click to collapse
If battery isn't the same, power consumption could burn the phone.