HELLO i have recently installed andriod 4.3 I9300XXUGMK6 everything succesfull but now when the phone booted network is not working its saying insert sim when the sim is already inserted i have reset the phone and put sim back but stilll showing the same thing please help me
i have attached the picture please tell me what to do help me :'(
ac_saadix said:
HELLO i have recently installed andriod 4.3 I9300XXUGMK6 everything succesfull but now when the phone booted network is not working its saying insert sim when the sim is already inserted i have reset the phone and put sim back but stilll showing the same thing please help me
i have attached the picture please tell me what to do help me :'(
Click to expand...
Click to collapse
did you cut the sim to micro sim size manually? if yes than check the contact ppoints.
if it was already micro sim when you bought than something might be wrong by hardware side.
Hello dear friends.
I have a problem. I bought the acer z2 duo.
I had microsim so until my normal sim comes I opened it and worked it for a bit.
I normally signed in with my google account and I downloaded also all the updates required from the playstore.
When my sim came I reset the mobile and put the sim in.
Once again I logged and everyhing but now Anything I want to download or Update I get the message
"Error Update for "XXXXX" could not be downloaded due to an error (403).
I tryed a data wipe a hard reset.. but also the same thing
I tried with and without the sim and with and without the sd card
Can somebody help me please on how to dont know.. maybe Flash the mobile to an original firmware or something?
I did searched for an apllication like KIES for samsung or sony application but I didnt found anything by acer.
Please help.
Thank you in advance
Hello, and thanks for helping me: I've used a Z7 Max since many month on 3.08 flashed on my phone without any problems. but after having flashed a new rom today (yirom's CM12), the phone cannot detect any sim, in no one slot.
I've tried to go back to 3.08, with nubia tool updater and with twrp recovery, but even after full wipes, impossible to detect sim cards. If I Check Msim settings, it says "deactivate", not "no card".
The phone never answer sim lock pin .
Is there a way to get out of there? Thank you very much and sorry for my english.
Flash another ROM (Z7max（NX505J）电信4G双卡 V3.22)
It is not a rom problem. I have lost IMEI, but have the .nv file. But when i try to nrestore them with qbst, the phone answer the pin code again and again and again....
Use google search
Stupid. For those who have this problem, i solved it by trying again 'd again with qbst (and force efs verification). Nota: my computer did 3 *.nv backup of imei, only one was correct, the bigger one.
My my moto e phone 1.6 years old after resetting it is not detecting sim card and also wifi is not working. Also while checking imei number it is not getting. Plz help me. Sim and wifi options in settings is like disabled. What will be the problem it's android lollipop 5.1.1 not rooted
Re-flash
Flash the factory images of the device
Hit thanks if i helped you
After flashing factory images not working WiFi please help me
akashksn said:
After flashing factory images not working WiFi please help me
Click to expand...
Click to collapse
You flashed all the images of you'r device or only flashed the system partition???
Sorry for my english
I think you have null imei and baseband issue........ To solve this flash factory image using fastboot and bootloader
The short history:
Playing with an "official" ROM I bricked my phone. I was able to recover it, everything works properly except the telephony, I can't make phone calls :crying:.
The full story:
The behaviour of my phone is different depending on which slot I put my SIM card.
If I put my SIM on the first slot, when the phone reboots it doesn't ask for the PIN and doesn't recognise the card. But if I switch to plane mode and I reboot the phone, the phone then asks for the PIN number. If I introduce an incorrect one, it recognises that it is incorrect ans ask for a new one (then it is reading the card to know that), but when I introduce the correct one, it does no connect whit my carrier (of course, before that I switch off the plane mode).
If I put my SIM on the second slot, it asks for the PIN number but similarly to the previous case, It doesn't connect with the carrier.
In both cases dialling *#06# on the phone, I can read the two IMEI and the MEID codes and they agree with the codes printed on the phone box.
Moreover, if I install an app (I tested with some of them) that reads the SIM card it can read the name of my carrier and all the contacts that are on my SIM.
Things that I tried:
0) I tried to use my SIM in another phone, and it works. I also tried to use another SIM in my phone, and I have the same problem.
1) I tried to install several ROM's:
- Jeff72ROM (v1.30 and v1.32) from: http://www.needrom.com/category/zte/serial-nubia/z11-mini/
- stock ROM from http://4pda.ru/forum/index.php?showtopic=776504&st=0#entry52586301
- And experimental port of CM14 (I can't remember where I found it)
- CUOCO92 from http://blog.grossoshop.net/nubia-z11-mini-rom-gs-by-cuoco92/
- An "official" ROM: NX529J_Z69_EN_NSXPK1JD00K132 from http://www.nubia.com/es/support.php?a=phone&pid=8 (this is the ROM that bricked my phone, I modified it in order to avoid the problem).
To install all these ROM I used TWPR from http://www.androidbrick.com/download/z11-mini-nx529j-twrp-root/
When I dial *#*#4636#*#* on the phone it says that the type of preferred net is WCDMA. It seems to me that these nets are not in use in Europe (I live in Spain). Itried to change that, but I couldn't. Then I applied the patch http://forum.xda-developers.com/showthread.php?t=2394689 but it doesn't work. I also tried to modify the properties in "build.prop" without success. Now I think this is not the problem since all the ROM's have similar properties, in special CUOCO92 that is reported to work in Italy.
What I think it happened:
When I tried to flash the "official" ROM it failed because it tried to write too many files in the "system" partition (I hadn't this problem with any other ROM). Then I realised that my phone was bought in China and this ROM was for the international version, perhaps the international version has a different partition scheme).
What I did is to remove some very easy to install apps (i.e. google maps) in the ROM in order that the remaining apps fit in the partition, but then I made the mistake to activate the option in TWPR of making "rm -rf" instead of a "format". It seems to me that with this option the rm command followed some link to another partition and removed some files that shouldn't be removed, and those files are not in any ROM.
Does anybody think that this makes sense?
What can I do?
nice, super description. i am stuck with my nubia z11 mini, brought from china. installed 1.23, recently updated new 1.36 but there is no google play, other all working perfectly.
Hi,
I have the same problem. Did you find a solution?
Thanks in advance, F.
---------- Post added at 08:17 AM ---------- Previous post was at 07:44 AM ----------
@jbartolo
I have the NX529J and the option wasn't changed, it was still format. I don't think the problem is related to the partition.
@jbartolo
Any news about your z11?
Did you manage to fix it?
I have the same problem.
efrai3 said:
@jbartolo
Any news about your z11?
Did you manage to fix it?
I have the same problem.
Click to expand...
Click to collapse
No solution :crying:
I had access to another z11 mini and a played copying partitions from this phone to my phone without success.
@jbartolo
Since you can have access to another z11 mini please check these guides
http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/
http://www.androidbrick.com/ultimat...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-imei-baseband-repair-fix-part-2/
Also you will see more guides in the mentioned site and maybe you can fix your phone. Unfortunately i dont have access to another z11 mini to try. Wish you good luck.
@jbartolo
I did some progress with my phone.
I flash it with the chinese 1.23 rom(its the one in fastboot structure as i understand,a service rom) using Xiaomi's MiFlash tool.
Phone came up with null IMEI'S and MEID. Then i write missing IMEI'S & MEID ,with some tools from the site i mentioned you in my previous post.
So everything is in place now. IMEI'S & MEID.
Now when i dal *#06#* and *#*#4636#*#* i can see Imei's & Meid.
Also i can change the option from WCDMA preferred to other options and stick with them (*#*#4636#*#*) and i can see in phone settings and SIM menu all the options.
Both sim trays read my sim and ask for pin.
In SIM menu, i can search for avalaible carriers but the only problem now is that when i'm trying to connect to my sim carrier unfortunately phone can't register to my carrier.
I'm trying to figure out how to solve this issue.
You can try what i did and maybe you are more lucky than me and can fix your phone.
Hope to hear from you soon and maybe we can share some more ideas.
efrai3 said:
@jbartolo
I did some progress with my phone.
I flash it with the chinese 1.23 rom(its the one in fastboot structure as i understand,a service rom) using Xiaomi's MiFlash tool.
Phone came up with null IMEI'S and MEID. Then i write missing IMEI'S & MEID ,with some tools from the site i mentioned you in my previous post.
So everything is in place now. IMEI'S & MEID.
Now when i dal *#06#* and *#*#4636#*#* i can see Imei's & Meid.
Also i can change the option from WCDMA preferred to other options and stick with them (*#*#4636#*#*) and i can see in phone settings and SIM menu all the options.
Both sim trays read my sim and ask for pin.
In SIM menu, i can search for avalaible carriers but the only problem now is that when i'm trying to connect to my sim carrier unfortunately phone can't register to my carrier.
I'm trying to figure out how to solve this issue.
You can try what i did and maybe you are more lucky than me and can fix your phone.
Hope to hear from you soon and maybe we can share some more ideas.
Click to expand...
Click to collapse
Take a look here https://forum.xda-developers.com/zte-z7/help/nubia-z7-nx506j-qcn-backup-t3566808. Might help you guys with the problem you are facing. Most important part is you need a working qcn backup from another device
tassos_chry said:
Take a look here https://forum.xda-developers.com/zte-z7/help/nubia-z7-nx506j-qcn-backup-t3566808. Might help you guys with the problem you are facing. Most important part is you need a working qcn backup from another device
Click to expand...
Click to collapse
Yes i know that we need a backup of qnc from another working phone in order to modify it and apply our imei's and meid, but where to find one???
It's difficult to have one as you understand.
efrai3 said:
Yes i know that we need a backup of qnc from another working phone in order to modify it and apply our imei's and meid, but where to find one???
It's difficult to have one as you understand.
Click to expand...
Click to collapse
You could contact the owner of www.androidbrick.com in case he has one. Or you can ask @jbartolo to provide a backup of his other device. Taking a qcn backup is a pretty simple procedure
@efrai3 Just contacted him again and he was happy to share with me a qcn backup for your device
You can contact him too and ask for one! He will be glad to help!
tassos_chry said:
You could contact the owner of www.androidbrick.com in case he has one. Or you can ask @jbartolo to provide a backup of his other device. Taking a qcn backup is a pretty simple procedure
@efrai3 Just contacted him again and he was happy to share with me a qcn backup for your device
Hit Thanks if i helped and let me know if it worked
Click to expand...
Click to collapse
Thanks to my friend tassos_chry, my phone is fixed.
problem solved: Z11 mini working again
All,
the AndroidBrick method worked.
First I tried it with my own qcn backup but that didn'twork. I received a qcn (Chinese, 64 GB) from AndroidBrick and I followed the repair guide. My Nubia Z11 mini is working again.
The solution for our problem is that you need a qcn backup from a working phone because when you install the wrong rom (international version) the modemst-partions are corrupt.
I'll prepare a backup qcn from my phone (changed IMEI) and I can send it to you.
Send me a mail at [email protected].
Filip.
Z11 mini NX529J problem
First of all:
>i bought an used NX529J
>first sim slot doesn't work at all, second slot recognize sim card
^-i don't know if it's software or hardware related
>no connect to carrier
>cannot unlock sim card with PIN
What i tried:
>flashed XenonHD Rom
>*#06#* : only MEID, but it is the same number, as the first IMEI number
>*#*#4636#*#* : first IMEI number
>tried all sim settings, but no connect to carrier
Has some an idea?
Hello everybody,
i found the solution! Now both sim card slot's work and can connect to carrier!
My solution:
https://forum.xda-developers.com/android/development/zte-nubia-z11-mini-nx529j-restore-t3619771
The right qcn file
FilipVD said:
All,
the AndroidBrick method worked.
First I tried it with my own qcn backup but that didn'twork. I received a qcn (Chinese, 64 GB) from AndroidBrick and I followed the repair guide. My Nubia Z11 mini is working again.
The solution for our problem is that you need a qcn backup from a working phone because when you install the wrong rom (international version) the modemst-partions are corrupt.
I'll prepare a backup qcn from my phone (changed IMEI) and I can send it to you.
Send me a mail at [email protected].
Filip.
Click to expand...
Click to collapse
Hello Filip,
Would you help me, please? I need the same chinese 64GB qcn file you got from AndroidBrick too!
I followed the same repair guide on AndroidBrick (using a vietnamite qcn file I just download) with no success because when I started restoring the qcn I received a message that My Phone is not compatible and after rebooting ...adviced me 2 times that the update did not success.
I will be happy to give my email address for your (or even other God) help.
Have a nice day and a good way