Hello
i tried many times Easy Magic TWRP installer/Easy Magic PhilZ Touch installer both, auto & manual both not working, on auto when it near to finish my tablet auto disconnected from pc & Easy Magic PhilZ Touch installer says port successfully but on recovery mood same old stock recovery, when i try to do manual it gave error in the last, Aborting, Ported recovery.img is too large & causes region overlap! i tried to use 7mb partition way to fix it but no success.
my tablet is some chinese unknown company tablet with mt6580 (MT8752) chipset & running android lollipop 5.1, i already rooted just want to install custom recovery, any help will be highly appreciated.
Regards
Edit: I ported TWRP successfully, i used google nexus 7 2012 tablet TWRP 3.0.2.0 to port , now everything working fine but the screen is flipped, I mean the TWRP screen showing menu & buttons etc on portrait but the touches input act like the TWRP screen is landscape which is a headache! so can you please help me what need to do to fix this issue.
Thanks
Regards,
Related
So I rooted the device no problems , and I used a generic CWM recovery for RK2918 devices, since I thought thats what it's running
Livesuit Shows no Rockchip device , it is now detecting a A10 device and I cannot load a Rockchip driver for the life of me , in the CWM recovery mode.
1. Is this device rockchip or not?
2. I have no control with volume controls can only press power which reboots right back to CWM
3. Is there a proven recovery technique for this issue?
4. Does anyone have a backup <--- I was installing CWM to do this I belive I may have put the wrong on or
5. The factory firmware image <----- Double powertech site does not even list this tablet.
6. Is there a way to get the device out of CWM recovry mode? Yes I have done a hard reset via the reset button still CWM recovery.
Device is a DOPO 7020 it detect under windows as a D7016 though
Im not sure how to get out of this if I could even gain control of the menu up down to apply an update from zip this would be fine. I can work in WIN. MAC, Linux dont matter just need to get it working agin for my kid. Any help wold be appreciated.
protocol2 said:
So I rooted the device no problems , and I used a generic CWM recovery for RK2918 devices, since I thought thats what it's running
Livesuit Shows no Rockchip device , it is now detecting a A10 device and I cannot load a Rockchip driver for the life of me , in the CWM recovery mode.
1. Is this device rockchip or not?
2. I have no control with volume controls can only press power which reboots right back to CWM
3. Is there a proven recovery technique for this issue?
4. Does anyone have a backup <--- I was installing CWM to do this I belive I may have put the wrong on or
5. The factory firmware image <----- Double powertech site does not even list this tablet.
6. Is there a way to get the device out of CWM recovry mode? Yes I have done a hard reset via the reset button still CWM recovery.
Device is a DOPO 7020 it detect under windows as a D7016 though
Im not sure how to get out of this if I could even gain control of the menu up down to apply an update from zip this would be fine. I can work in WIN. MAC, Linux dont matter just need to get it working agin for my kid. Any help wold be appreciated.
Click to expand...
Click to collapse
I to am trying to get a custom rom on this tablet. and was just about to put CM on it. hopefully someone has a solution.
csseale said:
I to am trying to get a custom rom on this tablet. and was just about to put CM on it. hopefully someone has a solution.
Click to expand...
Click to collapse
A firmware recovery image would be great
I made the mistake of trying to install a CWM custom recovery on one of these exact tablets. I had the exact same results. As far as I have been able to find, you're pretty much stuck.
did anyone ever get the Dopo D7020 firmware? I have flashed mine that had never booted past the logo, with a similar firmware and it boots and works BUT it isn't Dopo and the camera doesn't work. Everything else seems fine. P.M. me if you need the firmware and I can give you the link. It's better than it not working at all!
banjomaniac
Hello all,
I recently tried updating my Archos 70c Titanium to Lollipop and started with rooting the device with Kingo Root.
After that I've tried Archtool app and CWM to deploy the custom recovery console to be able to install custom ROM. This somehow gone bad, and now I cant access the recovery console any longer.
Means, either with any app that can boot into recovery nor by pressing the hardare button combination. Both ways do NOT work any longer.
Since regular OS (Androis 4.4) is still properly booting, I guess I "simply" have to install a new custom recovery console.
Can someone share some info or guideline about how to do so?
The Kingo Root seems not to be reboot persistant. Is that correct? Which apps/tool are known to work with Archos 70c containing the Rockchip RK3026?
Any help is appreciated.
THanks much.
Hey all,
I've tried re-rooting the device with KingoRoot and it seems the device hangs on next reboot. At least I cant activate wireless any longer, and thus cant proceed with any other tool.
The next reboot, the device does not boot at all and hangs in a welcome boot logo loop. Only pressing the Hardware reset button on the back, makes it boot normally again. But then rooting is gone.
Anyone any idea how to proceed or troubleshoot.
Thanks for input.
[closed] recovery console broken on Archos 70c Titanium
Got some support in another forum purly focusing on the Archos devices.
For further reference, here's the thread: http://www.arctablet.com/blog/forum...titanium-rk3026-recovery-mode-not-accessible/
This can be closed.
Hi,everyone!!
So I am a first timer in such stuff,Anyways,i was looking to flash lineage os 13 rom and hence tried to install TWRP v3.0.2.Since there isn't a dedicated thread or such,I had to try generic MT6582 TWRP.
So i had rooted using kingoroot and flashed a twrp from droidadda using flashr.I had a gray screen with little flickering when i restarted and after that the screen was inverted.Touch left and right side on screen is pressed and vice versa.Same with up and down.Currently on TWRP 3.0.2 with lineage os 13.Can navigate device and use root explorer and such.
https://www.youtube.com/watch?v=lhS1ixDgfCk&feature=youtu.be
This is the problem
Hi guys,
Problem - Touch screen not working after pressing the Touch display add ons NVT-TS hang up then touch screen stopped working
Custom rom - AospExtended ROM V7.3
Need urgent help just flashed this ROM no problem using it i just noticed a minor thing where in the top menu scrolls down when playing games , so what i did was i tried to turn on the ghost display function if display is NVR after pressing that my phone hanged and i tried to reboot it but after rebooting touchscreen is unresponsive even changing/reflashing rom didn't help touch screen is also not working on TWRP.
Things done
- Wiped Data Via TWRP removed the pattern and all.
- Touch screen not working on TWRP
- Reflashed AEX using adb shell and reinstalled rom still the same.
- it's asking for allow debug upon boot but touch screen is not working.
- Tried flashing MIUI i flashed it successfully but touchscreen still not working
- Now recovery was also returned to stock
- Will try to buy USB-C OTG tomorrow and use mouse to enable debugging as system is still running i just cannot press anything volume up down power is working.
- Tried replugging Battery and touch screen flex.
- Still the same.
Any help thank you !
Flash via fastboot with mi flash tool a stock ROM V10.2.3.0. Only this firmware fix touch dead after bad update in twrp. Here link for download this firmware https://bigota.d.miui.com/V10.2.3.0....73c9f4b81c.tgz
Thanks man!
AndreSkywalker said:
Flash via fastboot with mi flash tool a stock ROM V10.2.3.0. Only this firmware fix touch dead after bad update in twrp. Here link for download this firmware
Click to expand...
Click to collapse
thanks man , you saved my phone Godbless.
Hi
I'm using the P858Y version of this device
And i simply can't get twrp working on it
What i've done:
- Enable OEM - USB debug
- Get to download mode
- Untick auto reboot on Odin
- Flash TWRP with Odin: So far, every version from 3.0 - 3.7 of the device on twrp website
Everytime i tries to boot to twrp, it just get black screen with backlight still lit, the twrp seem working cause i can swipe or touch the screen and it vibrate, but can't see anything
And i have to flash back to stock rom in order to get back to normal
- I've tried to use adb to control twrp with the back screen but the internal storage doesn't show up on my pc, simply can't flash anything with adb
Device on stock rom is normal, the screen, Touch screen is normal aswell
I don't know what i did wrong in the process
Any idea how i can get custom rom to work on this device
Don't know if anyone has experience this problem.
Every help i can get is appreciated
vietan said:
Hi
I'm using the P858Y version of this device
And i simply can't get twrp working on it
What i've done:
- Enable OEM - USB debug
- Get to download mode
- Untick auto reboot on Odin
- Flash TWRP with Odin: So far, every version from 3.0 - 3.7 of the device on twrp website
Everytime i tries to boot to twrp, it just get black screen with backlight still lit, the twrp seem working cause i can swipe or touch the screen and it vibrate, but can't see anything
And i have to flash back to stock rom in order to get back to normal
- I've tried to use adb to control twrp with the back screen but the internal storage doesn't show up on my pc, simply can't flash anything with adb
Device on stock rom is normal, the screen, Touch screen is normal aswell
I don't know what i did wrong in the process
Any idea how i can get custom rom to work on this device
Don't know if anyone has experience this problem.
Every help i can get is appreciated
Click to expand...
Click to collapse
Hello friend! I'm a noob and can't help you (yet), but someday maybe I can help you.
for now I recommend looking for some twrp here that has been made for your model specifically (in this case the Tab A 10.1 2016)
if you've already done that and didn't find any related post, maybe we just have to wait for someone less noob to help us.
I also have a problem related to the SM T113NU tablet. I tried using Odin 3.13.1 and TWRP 3.0.2 but I was unsuccessful. Simply when I try to access the TWRP menu only the factory menu appears.
I wish you success and that you manage to resolve the issue.
chefez said:
Hello friend! I'm a noob and can't help you (yet), but someday maybe I can help you.
for now I recommend looking for some twrp here that has been made for your model specifically (in this case the Tab A 10.1 2016)
if you've already done that and didn't find any related post, maybe we just have to wait for someone less noob to help us.
I also have a problem related to the SM T113NU tablet. I tried using Odin 3.13.1 and TWRP 3.0.2 but I was unsuccessful. Simply when I try to access the TWRP menu only the factory menu appears.
I wish you success and that you manage to resolve the issue.
Click to expand...
Click to collapse
Many Thanks brother, i've search many thread and somes are having problem just like me. Maybe it just Samsung being an ass like they always did