Hi
So the situation is this
i have samsung I9060I i installed chainfire and the phone was softbricked
i tried http://forum.xda-developers.com/showthread.php?t=2362873 except when i use "su" command i get "connection to ui timed out ". my phone is rooted with kingroot i read somewhere that it is causing the problem but dunno how to fix it.
i tried hard reset but still the phone is stuck as usaul at boot logo.
I tried flashing rom with odin exept my phone for some reason doesnt have odin mode when i hit the key combo i get factory mode instead.
so i'm stuk now ,would appreciate an advice thx .
I think you are hard bricked. There is a reason no one is replying. Unfortunately I think you are out of luck. Sorry Mate! ?
Sent from my SM-T350 using XDA-Developers mobile app
ok thx for the reply .
I'm currently trying to fix a similar issue. But mine is a mediatek so I just use so flash tool. Odin is different though
Sent from my SM-T350 using XDA-Developers mobile app
---------- Post added at 04:47 PM ---------- Previous post was at 04:47 PM ----------
Zéro 56 said:
ok thx for the reply .
Click to expand...
Click to collapse
Please hit the thanks button if you would!
Sent from my SM-T350 using XDA-Developers mobile app
actually i just discovered that mine is mtk too (MT-6572) thats why i couldnt do it with odin.
I flashed with smart flash tool but now its hardbricked oups .
now when i try to flash i have "st enable dram failed" error so now i'm just testing every preloader i find .
thx for your reply .
Ok
Sent from my SM-T350 using XDA-Developers mobile app
i finally unbricked it(found the right preloader somehow), but simcard, wifi and bluetooth doesnt work probably nvram is corrupt .
If anyone have mt6572(i9060i) would be great i he can upload a backup of nvram.bin made with mtk tools.
dunno if its the right place to ask
thx anyway
Related
heloo everyone i updated my samsung galaxys3 (SHVE210S) using odin (ICS to JELLYBEAN) but after the installation odin says SUCESS but my phone is not working :/ phone is starting but stuck in a moment after the welcome sound can anyone help me how to resolve this problem plzzz , is it a problem in the firmware ????
Stuck
vinura kithmal said:
heloo everyone i updated my samsung galaxys3 (SHVE210S) using odin (ICS to JELLYBEAN) but after the installation odin says SUCESS but my phone is not working :/ phone is starting but stuck in a moment after the welcome sound can anyone help me how to resolve this problem plzzz , is it a problem in the firmware ????
Click to expand...
Click to collapse
===================
normally it will take like 5mins to 10mins max after the update however if you are stuck the only solution is try it again from odin using download mode.
goodluck man and hope this will help
JDroid Freak said:
===================
normally it will take like 5mins to 10mins max after the update however if you are stuck the only solution is try it again from odin using download mode.
goodluck man and hope this will help
Click to expand...
Click to collapse
i spent lic a hour lking @ it but still it stuck dude i try it several tymes but could'nt do it maybe a problem with the firmware
vinura kithmal said:
heloo everyone i updated my samsung galaxys3 (SHVE210S) using odin (ICS to JELLYBEAN) but after the installation odin says SUCESS but my phone is not working :/ phone is starting but stuck in a moment after the welcome sound can anyone help me how to resolve this problem plzzz , is it a problem in the firmware ????
Click to expand...
Click to collapse
You have the LTE mode, are you sure you installed the correct firmware?
Did yout perform a wipe ? ?
Sent from my GT-I9300 using xda app-developers app
factory reset from recovery. then make sure you flashed a compatible firmware
skingg said:
You have the LTE mode, are you sure you installed the correct firmware?
Click to expand...
Click to collapse
yes i have the LTE and i install the correct firmware
factory reset from recovery
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
vinura kithmal said:
yes i have the LTE and i install the correct firmware
Click to expand...
Click to collapse
and i9300 is not LTE.
Thanks for reading this post i have a bootloop note 2 and i have no recovery apparently and one more problem my device goes into download mode but my comeputer nor odin find my device so two questions is there anyway to fix this and second im i srewed plz i need the help i need my note 2 back and im with verzion
sourpowaour said:
Thanks for reading this post i have a bootloop note 2 and i have no recovery apparently and one more problem my device goes into download mode but my comeputer nor odin find my device so two questions is there anyway to fix this and second im i srewed plz i need the help i need my note 2 back and im with verzion
Click to expand...
Click to collapse
Install Kies or your phones Samsung USB Drivers then Odin will recognize it
Connect and Flash stock firmware via Odin
Hope this helps :fingers-crossed:
nolinuxnoparty said:
Install Kies or your phones Samsung USB Drivers then Odin will recognize it
Connect and Flash stock firmware via Odin
Hope this helps :fingers-crossed:
Click to expand...
Click to collapse
odin is still not reading it please help me
sourpowaour said:
odin is still not reading it please help me
Click to expand...
Click to collapse
@abhisahara?
nolinuxnoparty said:
@abhisahara?
Click to expand...
Click to collapse
i dont what you saying
sourpowaour said:
Thanks for reading this post i have a bootloop note 2 and i have no recovery apparently and one more problem my device goes into download mode but my comeputer nor odin find my device so two questions is there anyway to fix this and second im i srewed plz i need the help i need my note 2 back and im with verzion
Click to expand...
Click to collapse
Windows may take many attempts in recognition of drivers. Try installing and rebooting PC
If it doesn't work, try another port
If it fails, then you would have to use any other PC
Sent from my GT-S5830i using xda app-developers app
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a memory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?
Answer
is there any body out there to help me please im really stock
huawei g610-u20 bootloop
same problem here ooo, please developers help out
sp flash tool error SOLVED
Armanium said:
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a memory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?
Click to expand...
Click to collapse
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
can you plase post a link for this rom?
huawei g610-u20 stock rom
primux said:
can you plase post a link for this rom?
Click to expand...
Click to collapse
https://disk.yandex.ru/public/?hash=+LW/dwHLEePHkyWAFz1STiYZQQxjLEaYmDruPBrhVl0=
---------- Post added at 02:42 PM ---------- Previous post was at 02:38 PM ----------
thats the link! just click on the down arrow where you see скачать or google-translate the page as it is in russian.
Armanium said:
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a mermory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?[/QUOTE
Dont worry brother .restart ur computer then u try.. it worked for me.or shut down then switch on ur pc
---------- Post added at 09:45 AM ---------- Previous post was at 09:36 AM ----------
Restart ur computer then try.it worked for me..dont worry brother.i got success after tried this way.
Click to expand...
Click to collapse
SOLVED
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
KUDOS to you man... the post really helped me.. and for the IMEI, use MTK Droid Tool... Works like a charm
HawkEye said:
KUDOS to you man... the post really helped me.. and for the IMEI, use MTK Droid Tool... Works like a charm
Click to expand...
Click to collapse
you are welcome! you can just help me hit the thank button.
funloft said:
you are welcome! you can just help me hit the thank button.
Click to expand...
Click to collapse
Missed that??? sorry anyways, do you know how to unlock the bootloader of Huawei G700-U10??
HawkEye said:
Missed that??? sorry anyways, do you know how to unlock the bootloader of Huawei G700-U10??
Click to expand...
Click to collapse
nope! but i think i've come across a post online on that!
SOLVED
funloft said:
nope! but i think i've come across a post online on that!
Click to expand...
Click to collapse
I think i solved it!!! there is a portugal ROM update for that phone (it mostly is like downgrading the SW) which will automatically get the bootloader unlocked and then CWM can be flashed through mobile uncle!!!! Guess i will have to start a post on this as i see a lot of G700-U10 users around
A Heartful Thanks!!!!!
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
Your method helped me and I recovered my Huawei Ascend G700-U10 phone....irony is that my IMEI number is still present so thanks alot!!! :laugh:
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
hy bro i have same problem but this method is not working. i unchecked the preloader and pressed upgrade firmware but it says please check the necessary parts(i think).by pressing download it gives brom error.
You have saved my A** Brother. Just wow
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
Indeed you have helped. your solution just brought my cellphone back to life again from a sudden death syndrome. Manny many thanks and love.
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
thank you sooooo very much...it work..you really saved my butt in here buddy...thanks alot....godbless
I need the firmware or ROM for LS 4505 Flame 8 mobile. I am unable to find it anywhere. It's not booting after I installed supersu in place of kingroot. My only hope to recover this mobile is to reinstall the firmware. Guys please help .
i want to root too
hey buddy i cant help you but you can help me by telling how to root flame 8 and get super su etc
Lol! Ok you can root it by downloading latest kingroot app. Just install and run. It will guide you through the process. Make sure its version 4.9.6 which is the latest one.
Sent from my SM-G900H using Tapatalk
DONE IT
I TRIED YESTERDAY AND FAILED AFTER YOU SAID I TRIED AGAIN FAILED THEN I BRING DOWN THE NOTIFICATION PANEL WHILE ROOTING ANDONE BUT BUDDY NOW I WNT SUpERSU buddy i want to lock my flame 8 to band 40 plz hlp
Dont know abiut locking on to band 40. But dont install supersu app just yet. It have some compatibility issues with this phone at the moment and it will put ur phone in bootloop.
Just use the default kingroot app to manage your root access for now.
Sent from my SM-G900H using Tapatalk
yeah
even with kingroot i managed to get band 40 but the network is not good only speed id good
i want LS-4505 flame 8 custom rom , so please give me it .
pankajbhol94 said:
i want LS-4505 flame 8 custom rom , so please give me it .
Click to expand...
Click to collapse
We are all waiting for the same. Still no luck.
Sent from my SM-G900H using Tapatalk
Help needed in Rooting Flame 8
Hi,
I have downloaded the latest kingroot and tried to root Flame 8. Could you please tell any specific steps to be done before rooting Flame 8 using kingRoot?
If you have any updates,Plz update to [email protected] with any specific links or steps to taken for rooting.
Ps: King Root and Kingo Root both from PC and mobile failed for me.
redhotiron2004 said:
I need the firmware or ROM for LS 4505 Flame 8 mobile. I am unable to find it anywhere. It's not booting after I installed supersu in place of kingroot. My only hope to recover this mobile is to reinstall the firmware. Guys please help .
Click to expand...
Click to collapse
Hi,
Same thing happened for me too..did I resolve the boot loop..if yes, plz help me...
Mail:[email protected]
vygavedha said:
Hi,
Same thing happened for me too..did I resolve the boot loop..if yes, plz help me...
Mail:[email protected]
Click to expand...
Click to collapse
Hi, I finally went LYF store and restored the Stock .Never say that we have rooted,just tel them you have taken update and it is not booting up. Make sure that you have done a factory reset from fastboot mode before visiting LYF store
Lyf Flame 8 LS-4505
I want custom rom for marshmallow also nougat for lyf flame 8 ls4505 . plz create cm and provide me how to bootloader unlock for this mobile . i want for a root and also try old nd new vrsn of kingroot but rooting faild . plz help nd any suggest . thx 4 advnc :good:
Novita2 said:
I want custom rom for marshmallow also nougat for lyf flame 8 ls4505 . plz create cm and provide me how to bootloader unlock for this mobile . i want for a root and also try old nd new vrsn of kingroot but rooting faild . plz help nd any suggest . thx 4 advnc :good:
Click to expand...
Click to collapse
I have rooted using KingRoot 4.8 in this model. Other versions of kingRoot didn't work for me..
Also never try to replace kingRoot with superSu since it leads to boot loop.I have tried this and finally went to Jio store to flash the stock for my bricked flame 8
Unbrick LYF FLAME 8 ls-4505
My flame 8 got rooted using kingroot (latest version from official site).
When I installed supersume app to install super su ,my phone got bricked. Not even booting into the system.
Then I could download the official firmware from the link: docs.google.com/uc?id=0B672QBSaJWBAWmtPaUNXTXVyR2c&export=download
Here are the steps;
Extracting the file, you'll get Qualcomm drivers,qpst n flash file folder.
Install drivers and qpst.
Then switch off the device (ls-4505) and replug the battery.
Then hold volume up+volume down+power button all together till your phone vibrates.
Then connect your device to PC and make sure the device is listed as HS-QDload.....something with a COM port in both device manager and qpst configuration.
Then open QFil and select the respective port and load mbn file (which looks like 'prog_emmc_firehose_89XX.mbn') in programmer patch section.
Then load XML files rawprogram0.xml and patch0.xml one by one.
Then click download. The process will be completed in 10 minutes. There you go with stock unbricked Flame 8. Device warranty also be restored.
##PossibleErrors:
1. rawprogram0.xml error;
then you can use file unparsedrawprogram without qcn.xml and patch0.xml instead.
Don't use unparsedrawprogram.xml, because it will wipe your qcn data(imei,WiFi Mac....)
2. QFil error;
then you can download latest version from here link: boycracked.com/portfolio/download-qpstools-flasher-for-qualcomm-chipset/
Good luck
Stock rom for lyf flame 8 4505
redhotiron2004 said:
i need the firmware or rom for ls 4505 flame 8 mobile. I am unable to find it anywhere. It's not booting after i installed supersu in place of kingroot. My only hope to recover this mobile is to reinstall the firmware. Guys please help .
Click to expand...
Click to collapse
firmware uploaded guys...just google it
Anyone tried this porting?
redhotiron2004 said:
I need the firmware or ROM for LS 4505 Flame 8 mobile. I am unable to find it anywhere. It's not booting after I installed supersu in place of kingroot. My only hope to recover this mobile is to reinstall the firmware. Guys please help .
Click to expand...
Click to collapse
Same here.....
I went to the LYF Service Center and got it worked
---------- Post added at 07:05 AM ---------- Previous post was at 06:58 AM ----------
VivCham said:
Same here.....
I went to the LYF Service Center and got it worked
Click to expand...
Click to collapse
Ahammed Danish said:
My flame 8 got rooted using kingroot (latest version from official site).
When I installed supersume app to install super su ,my phone got bricked. Not even booting into the system.
Then I could download the official firmware from the link: docs.google.com/uc?id=0B672QBSaJWBAWmtPaUNXTXVyR2c&export=download
Here are the steps;
Extracting the file, you'll get Qualcomm drivers,qpst n flash file folder.
Install drivers and qpst.
Then switch off the device (ls-4505) and replug the battery.
Then hold volume up+volume down+power button all together till your phone vibrates.
Then connect your device to PC and make sure the device is listed as HS-QDload.....something with a COM port in both device manager and qpst configuration.
Then open QFil and select the respective port and load mbn file (which looks like 'prog_emmc_firehose_89XX.mbn') in programmer patch section.
Then load XML files rawprogram0.xml and patch0.xml one by one.
Then click download. The process will be completed in 10 minutes. There you go with stock unbricked Flame 8. Device warranty also be restored.
##PossibleErrors:
1. rawprogram0.xml error;
then you can use file unparsedrawprogram without qcn.xml and patch0.xml instead.
Don't use unparsedrawprogram.xml, because it will wipe your qcn data(imei,WiFi Mac....)
2. QFil error;
then you can download latest version from here link: boycracked.com/portfolio/download-qpstools-flasher-for-qualcomm-chipset/
Good luck
Click to expand...
Click to collapse
Can i install Xposed framework in LS4505 ??? Have anybody tried?????
VivCham said:
Same here.....
I went to the LYF Service Center and got it worked
---------- Post added at 07:05 AM ---------- Previous post was at 06:58 AM ----------
Can i install Xposed framework in LS4505 ??? Have anybody tried?????
Click to expand...
Click to collapse
I couldn't find a custom recovery for the device yet. Hence I don't think it is able to install Xposed framework in the device.
Ahammed Danish said:
I couldn't find a custom recovery for the device yet. Hence I don't think it is able to install Xposed framework in the device.
Click to expand...
Click to collapse
As far as I know, you don't actually need custom recovery for the xposed framework to work. Its needed in case something goes wrong.
The framework itself is just an app that anyone can install if you have root access. After that you would need to activate the exposed framework from inside the app itself. Its not compulsory to install recovery.
Sent from my SM-G900H using Tapatalk
redhotiron2004 said:
As far as I know, you don't actually need custom recovery for the xposed framework to work. Its needed in case something goes wrong.
The framework itself is just an app that anyone can install if you have root access. After that you would need to activate the exposed framework from inside the app itself. Its not compulsory to install recovery.
Click to expand...
Click to collapse
Then I'll check it in my flame 8 :angel:
So I recently got a ZTE sonata 3 for my bday and I've been trying to root it for the past 2 days and... Nothing! Kingoroot, Dr fone, Kingroot, and IRoot does not work. Need desperate help please.
DerpinEpic32 said:
So I recently got a ZTE sonata 3 for my bday and I've been trying to root it for the past 2 days and... Nothing! Kingoroot, Dr fone, Kingroot, and IRoot does not work. Need desperate help please.
Click to expand...
Click to collapse
Note: the carrier is also cricket wireless
Same issue here, sonata 2 though...we need help!!!
DerpinEpic32 said:
So I recently got a ZTE sonata 3 for my bday and I've been trying to root it for the past 2 days and... Nothing! Kingoroot, Dr fone, Kingroot, and IRoot does not work. Need desperate help please.
Click to expand...
Click to collapse
adb reboot disemmcwp try that command then reattempt the rooting methods. that may give both of your phones extra write permissions
ARandomNoob said:
adb reboot disemmcwp try that command then reattempt the rooting methods. that may give both of your phones extra write permissions
Click to expand...
Click to collapse
I seemed to be getting a temporary root as any time I restart my phone, the root checker app tells me my phone is not rooted. Used Kingo root (PC) for this. Followed your directions and It appears to have worked? Restarted it and It appears I'm still rooted
I've also been reading around about kingoroot being a bit fishy or something with its excessive permissions? I'm very new to this though I have rooted before (not with kingo). How would you replace Kingo Super User with the SuperSU? Thank you very much I appreciate the help!
I Have same problem here.. I wanna ask, is possible if i perfomming a permanent root acces without unlocking the bootloader? Probably, its so hard and unpossible to unlock it.. Please clarify me
Sent from my Andromax A16C3H using Tapatalk
abusaasas said:
I seemed to be getting a temporary root as any time I restart my phone, the root checker app tells me my phone is not rooted. Used Kingo root (PC) for this. Followed your directions and It appears to have worked? Restarted it and It appears I'm still rooted
I've also been reading around about kingoroot being a bit fishy or something with its excessive permissions? I'm very new to this though I have rooted before (not with kingo). How would you replace Kingo Super User with the SuperSU? Thank you very much I appreciate the help!
Click to expand...
Click to collapse
-glad it worked and i can give you a link to replace kingo root https://forum.xda-developers.com/an...g/replace-kingoroot-supersu-manually-t3573361
---------- Post added at 04:44 AM ---------- Previous post was at 04:40 AM ----------
w_udyn said:
I Have same problem here.. I wanna ask, is possible if i perfomming a permanent root acces without unlocking the bootloader? Probably, its so hard and unpossible to unlock it.. Please clarify me
Sent from my Andromax A16C3H using Tapatalk
Click to expand...
Click to collapse
What step are you stuck on using the ADB command?
You set up ADB, there are so many guides for this
connect your phone run the command "adb reboot disemmcwp" (without the "). it may give you extra write permissions
Attempt all the one click root methods till you find one that works
There are several guides to Replace kingroot or kingoroot with supsu i linked one in the previous post. that only works with kingo root, NOT king root.
ARandomNoob said:
-glad it worked and i can give you a link to replace kingo root https://forum.xda-developers.com/an...g/replace-kingoroot-supersu-manually-t3573361
---------- Post added at 04:44 AM ---------- Previous post was at 04:40 AM ----------
What step are you stuck on using the ADB command?
You set up ADB
connect your phone run the command "adb reboot disemmcwp" (without the "). it may give you extra write permissions
Attempt all the one click root methods till you find one that works
Click to expand...
Click to collapse
Ohh.. I'll try it later.. Cause i am not with my PC rightnow.. I wanna tell you.. I ve readed any tutorial around forums.. That do the rooting is not possible with the unlock bootloader device.. I have tryed KINGGO PC.. Its done.. But when the device rebooted the root gain was gone.. I wish your method could help me well.. Thanks before waste your times
Sent from my Andromax A16C3H using Tapatalk
w_udyn said:
Ohh.. I'll try it later.. Cause i am not with my PC rightnow.. I wanna tell you.. I ve readed any tutorial around forums.. That do the rooting is not possible with the unlock bootloader device.. I have tryed KINGGO PC.. Its done.. But when the device rebooted the root gain was gone.. I wish your method could help me well.. Thanks before waste your times
Sent from my Andromax A16C3H using Tapatalk
Click to expand...
Click to collapse
That is false, devices with locked boot loaders can be rooted, and i have done it many times . Are you referring to the same phone as the post correct? They just said it worked for them, they now have root access and it sticks on reboot.
ARandomNoob said:
That is false, devices with locked boot loaders can be rooted, and i have done it many times . Are you referring to the same phone as the post correct? They just said it worked for them, they now have root access and it sticks on reboot.
Click to expand...
Click to collapse
I am so glad .. My device is not same with the one on the post.. As like you can see.. My phone is Haier Andromax A16c... OS Lollipop 5.1.1 CPU Qualcomm Snapdragon 210 MSM8909.. Would your method work for my device?
Sent from my Andromax A16C3H using Tapatalk
w_udyn said:
I am so glad .. My device is not same with the one on the post.. As like you can see.. My phone is Haier Andromax A16c... OS Lollipop 5.1.1 CPU Qualcomm Snapdragon 210 MSM8909.. Would your method work for my device?
Sent from my Andromax A16C3H using Tapatalk
Click to expand...
Click to collapse
I think it only works on some zte phones. ahhh you said you had the same problem so i figured you meant phone too. I didn't find anything in my searches sorry maybe you will have better luck. I'd try all the rooting programs like kingo, king, etc pc and non pc versions if available and if you have not done so create a new post for your device because someone may have achieved permanent root with your phone but they may not see you need help and what kind of phone you have in a post about a different phone lol I'll search some more but good luck!
ARandomNoob said:
I think it only works on some zte phones. ahhh you said you had the same problem so i figured you meant phone too. I didn't find anything in my searches sorry maybe you will have better luck. I'd try all the rooting programs like kingo, king, etc pc and non pc versions if available and if you have not done so create a new post for your device because someone may have achieved permanent root with your phone but they may not see you need help and what kind of phone you have in a post about a different phone lol I'll search some more but good luck!
Click to expand...
Click to collapse
Its oke.. Thanks before Vrooh
Sent from my Andromax A16C3H using Tapatalk
Hello how to unlock boot loader in snapdragon 210 chip set phones
makemoney333 said:
Hello how to unlock boot loader in snapdragon 210 chip set phones
Click to expand...
Click to collapse
Just read my post above
Sent from my Andromax A16C3H using Tapatalk
Hey your phone is andromax a or what sir
makemoney333 said:
Hey your phone is andromax a or what sir
Click to expand...
Click to collapse
Just look up my post above.. Keep reading on any forum..
Sent from my Andromax A16C3H using Tapatalk
Sir is there any difference between snapdragon 210 and snapdragon 210 ×20
---------- Post added at 03:23 AM ---------- Previous post was at 03:22 AM ----------
Sir I'm asking because my phone your phone have the sameeeee specs from camera to every thing
makemoney333 said:
Sir is there any difference between snapdragon 210 and snapdragon 210 ×20
Click to expand...
Click to collapse
Come on.. Aku orang indonesia juga woyy.. Kamu orang indonesia kan?
Sent from my Andromax A16C3H using Tapatalk
Sorry I didn't understand
makemoney333 said:
Sorry I didn't understand
Click to expand...
Click to collapse
Ok whatever.. My devices is Andromax A.. As like i wrote above
Sent from my Andromax A16C3H using Tapatalk