Hi,
I bought the Acer Liquid E Ferrari Special Edition phone in March 2012 which now comes with a updated Froyo 2.2 Stock ROM (This previously had the 2.1 Eclair as Stock ROM).
I have gone through a lot of posts and have done a lot of search & study w.r.t to this & other phone Models & in general related to Android OS, Rooting, Flashing, etc.
After much Research I came across "Z4Root" Rooting application & took the risk of trying it out. The "Temporary Root" option did not work however, the moment I tried the "Permanant Root" option it worked like a charm and I was easily able to "ROOT" my phone.
I have then installed "BusyBox" & "Titanium BackUp" and have taken a BackUp of my phone. This also went through smoothly.
I then downloaded "ROM Manager" application available in the Market as I wanted to make a "Nandroid BackUp" before trying anything else out like flashing. "ROM Manager" has the inbuilt facility to download & install "Clockworkmod Recovery" based on which phone model it is installed and it is required before anything else can be used or executed from "ROM Manager". I executed this option and it searched and listed "Liquid E" as the only option for installing "Clockworkmod Recovery" which I went ahead with and let the installation workout. This however was UNSUCCESSFUL as it gave an error stating "An error occurred during installation". I tried this twice but it came up with the same error message.
My Phone is working without any issues at the moment but I have never tried to enter into the default Recovery Mode also of my phone. The default option does not have any other useful options like BackingUp & Restore that the custom Recovery applications provide like "Clockworkmod Recovery".
I would like to intall a "Custom Recovery" on this specific phone model specifically keeping in mind that it has a updated stock Froyo 2.2 ROM. Does anybody know or have the same which has been tried & tested for this phone?
I came across "Malez Recovery" also for the Liquid E phone but believe it was made for the Eclair 2.1 and installing it or trying to install the same might mess up or brick my phone as it is a stock Froyo 2.2 ROM.
Phone Specifications are as follows:
Model : ACER LIQUID E FERRARI SPECIAL EDITION
Android Version : FROYO 2.2
Baseband Version : A1-05.02.01
Kernel Version : 2.6.29
Build Number : ACER_LIQUIDE_4.005.02_AAP_G2F
CPU : QUALCOMM 768 MHz
CPU Version : 8250
RAM & ROM : BOTH 512
Horizontal Pixels : 480
Vertical Pixels : 800
Acer APN Version : 1.117-1
I have also found that LiquidNext 1.9.2 is a custom ROM that can be flashed on this model and have also come across another post which details installing Gingerbread on this model. Please advise and/or provide links to the following:
1. Install Custom Recovery (A Tried & Tested One!!!)
2. Best & Latest Custom ROM that can be Flashed (Again A Tried & Tested One!!!)
MOST IMP: PLEASE NOTE THAT THE MOST IMPORTANT POINT HERE IS THIS SHOULD BE FOR THE "ACER LIQUID E FERRARI SPECIAL EDITION" MODEL AS MANY OTHERS LISTED ON THE NET ONLY SPECIFY THEY ARE FOR "LIQUID E" WHICH IS A COMMON TERM FOR MULTIPLE ACER MODELS & THESE ARE MOSTLY OLDER VERSIONS.
Regards,
RSN.
No One has an Answer????
Hi,
I had posted this query in March and its now August and there has been no reply to it.......
Has nobody ever installed a Custom Recovery and a Custom ROM on the Acer Liquid E Ferrari Special Edition Mobile?????
Request the Moderator to move this to the right queue if this is not at the right place due to which I am not receiving a reply.
Please advise........
Awaiting Help from someone who has done this and confirmed everything is working perfectly........
Regards,
RSN
Resolved it Myself
Hi,
I found out how to do it and am now successfully running Android 2.3 Gingerbread OS on my Acer Ferrari Special Edition Phone.
This Thread can be Closed.
Regards,
RSN.
info
rsnyn said:
Hi,
I found out how to do it and am now successfully running Android 2.3 Gingerbread OS on my Acer Ferrari Special Edition Phone.
This Thread can be Closed.
Regards,
RSN.
Click to expand...
Click to collapse
hi,
could you please provide the link or any information for updating the phone.
regards,
Hello friends.
I've just bought an HDC Note 3 SM-N900 chinese phone, with Android 4.3, MTK6589 processor, 720p screen, 1GB ram, etc. (from dhgate)
I'm very happy with the phone except for that it doesn't have Google Play Services installed on it, so i can't use Google Apps correctly, or i can't even install some of them.
I've red that this problem is common in custom roms, and it can be fixed easily through flashing the gapps of your android version to the phone with cwm recovery, but this doesn't work at all with mine, because system becomes unstable after installing them, and google apps (even google play) don't work after flashing, and also, when i have them installed and i try to open google+, for example, a notification pops up telling me this "Google Play Services isn't compatible with your device. Contact with the manufacturer for more details"
Can anybody please help me? Thank you in advance. Regards.
Hello Jose,
It seems that I've bought the same phone and I have the same problem. Google Play app works but Hangouts, YouTube, Google Keep don't work on the device. Could you please give link to your phone with it description? It we have absolutely the same phones we can combine our efforts.
Regards,
Artem
frezerovschik said:
Hello Jose,
It seems that I've bought the same phone and I have the same problem. Google Play app works but Hangouts, YouTube, Google Keep don't work on the device. Could you please give link to your phone with it description? It we have absolutely the same phones we can combine our efforts.
Regards,
Artem
Click to expand...
Click to collapse
Hello Artem,
I can't post outside links because i'm new here...but my phone is the HDC Note 3 N900. I bought it from a seller called "Skinnygirl" on DHgate.
Anyway, the chinese seller says that he will provide me a new software version for this phone soon, with google apps and some other bugs fixed. When i have it, i will tell you.
Best regards,
Pepe.
josebegines said:
Hello Artem,
I can't post outside links because i'm new here...but my phone is the HDC Note 3 N900. I bought it from a seller called "Skinnygirl" on DHgate.
Anyway, the chinese seller says that he will provide me a new software version for this phone soon, with google apps and some other bugs fixed. When i have it, i will tell you.
Best regards,
Pepe.
Click to expand...
Click to collapse
Thank you, Pepe. I've found your phone on DHgate and I have the same one. If I find something useful I will inform you too.
Best regards,
Artem
Hello Pepe,
By the way, what version of GApps have you flashed on your phone? Android 4.2 or Android 4.3?
It seems that our phone really has Android 4.2. Maybe flashing GApps for Android 4.2 could fix the problem?
P.S. Pepe, how did you install modified recovery? I've just get root.
Regards,
Artem
josebegines said:
Can anybody please help me? Thank you in advance. Regards.
Click to expand...
Click to collapse
Hello Pepe.
I found the solution!
You must have root-access and ClorkWorkMod (CWM) recovery.
1. Download GApps "gapps-jb-20121212-signed.zip" from wiki.rootzwiki.com/Google_Apps and put it into your SD-card.
2. Enter CWM recovery and make Wipe data/factory reset, Wipe cache and Wipe dalvik cache
3. Don't exit recovery and enter "install zip from sdcard" and install GApps from SD-card
After that reboot your phone.
If any questions please don't hesistate to contact me.
Best regards,
Artem
frezerovschik said:
Hello Pepe.
I found the solution!
You must have root-access and ClorkWorkMod (CWM) recovery.
1. Download GApps "gapps-jb-20121212-signed.zip" from wiki.rootzwiki.com/Google_Apps and put it into your SD-card.
2. Enter CWM recovery and make Wipe data/factory reset, Wipe cache and Wipe dalvik cache
3. Don't exit recovery and enter "install zip from sdcard" and install GApps from SD-card
After that reboot your phone.
If any questions please don't hesistate to contact me.
Best regards,
Artem
Click to expand...
Click to collapse
and in case your bootlogo and animation turns to android instead of samsung .....
key in this code in dialer
*#0077# then a pop up message appear.....then manually restart phone......if u do it for the 2nd time....it will boot up android logo again.....as default....so just do it again ....if you do mistake......
all the best....so far this SM N900 the best clone of note 3 so far.....but there is a new model call note 4 v11 where s pen have laser ....and can push like ori s pen.....
hahahahahah
GApps Freezing
These GApps don't work for me. Have tried 20121212 (4.2.2) and 20130812 (4.3)
Both flash OK in CWM Recovery, but at the Welcome screen, it hangs at "Connecting to Wifi". Then I get "Unfortunately, Setup Wizard has stopped." I'm stuck in a loop here. I'm a bit stumped.
Device: SM-N900 2Gb RAM 32Gb ROM Single Sim
Build Num: JSS15J.N900UBUBMJ2
Any ideas would be appreciated . I would like to try a custom ROM if there is one available for this model. Needrom has one for the Note 3 Sunny. Could I give that a try?
EDIT: I did a Factory Reset in CWM then flashed Gapps 20130812 (4.2.2 this time) again and it worked fine without the above loop. But the original problem of Google Play Services being "unsupported" on my device remains. Guess I will just have to do without hangouts etc for a while. :-/
Need ROM of this Phone Please
Hello am new here,been following this tread and purchased the same phone,while trying to flash the gapps my phone is having issues could someone please upload a backup.
Thank You In Advance
bromster said:
These GApps don't work for me. Have tried 20121212 (4.2.2) and 20130812 (4.3)
Both flash OK in CWM Recovery, but at the Welcome screen, it hangs at "Connecting to Wifi". Then I get "Unfortunately, Setup Wizard has stopped." I'm stuck in a loop here. I'm a bit stumped.
Device: SM-N900 2Gb RAM 32Gb ROM Single Sim
Build Num: JSS15J.N900UBUBMJ2
Any ideas would be appreciated . I would like to try a custom ROM if there is one available for this model. Needrom has one for the Note 3 Sunny. Could I give that a try?
EDIT: I did a Factory Reset in CWM then flashed Gapps 20130812 (4.2.2 this time) again and it worked fine without the above loop. But the original problem of Google Play Services being "unsupported" on my device remains. Guess I will just have to do without hangouts etc for a while. :-/
Click to expand...
Click to collapse
Brom ....did you backup your original ROM using MTK droid tools ? u need to do that first .....and flash using flash tools the rom ...
get it root then CWM using MTK droid tools .....
then do the 3 wipes .....flash gapps 4.2.2 12122012 .......it should run ok .....if its smooth....you will get the enter GMAIL screen and the first time your play store will be on version 3.3.10 .....it should be okay then .....
good luck !
bromster said:
These GApps don't work for me. Have tried 20121212 (4.2.2) and 20130812 (4.3)
Both flash OK in CWM Recovery, but at the Welcome screen, it hangs at "Connecting to Wifi". Then I get "Unfortunately, Setup Wizard has stopped." I'm stuck in a loop here. I'm a bit stumped.
Device: SM-N900 2Gb RAM 32Gb ROM Single Sim
Build Num: JSS15J.N900UBUBMJ2
Any ideas would be appreciated . I would like to try a custom ROM if there is one available for this model. Needrom has one for the Note 3 Sunny. Could I give that a try?
EDIT: I did a Factory Reset in CWM then flashed Gapps 20130812 (4.2.2 this time) again and it worked fine without the above loop. But the original problem of Google Play Services being "unsupported" on my device remains. Guess I will just have to do without hangouts etc for a while. :-/
Click to expand...
Click to collapse
i have the same phone like you guys, Note 3 SM-900 Clone... i manage to install the SM900 ROM from needrom and i must said that it perform flawless, much more smother than the original chinesee ROM that come with... still, i loose my Samsung logo after flashing this ROM and i am not able to install CWM in order for me to flash the zip with the Samsung logo...
my device information >
1:1 Samsung Galaxy Note 3 SM900 with real Infrared,
1.2 Ghz Quad Core, 1GB RAM, 8GB ROM
Single SIM Version
Model Number SM-900
Android Version 4.3
Baseband Version N900UBUBMJ2
Kernel version 3.0.4-1598409 se [email protected] 504-18#1 Fri Nov 29 09:54:18 cat 2013
Build Number JSS15J.UBUBMJ2
My phone is rooted with shuame, i have root explorer, uncle tools and root checker...
frezerovschik said:
Hello Pepe.
I found the solution!
You must have root-access and ClorkWorkMod (CWM) recovery.
1. Download GApps "gapps-jb-20121212-signed.zip" from wiki.rootzwiki.com/Google_Apps and put it into your SD-card.
2. Enter CWM recovery and make Wipe data/factory reset, Wipe cache and Wipe dalvik cache
3. Don't exit recovery and enter "install zip from sdcard" and install GApps from SD-card
After that reboot your phone.
If any questions please don't hesistate to contact me.
Best regards,
Artem
Click to expand...
Click to collapse
Frezerovschik, that doesn't work for me, i've already tried that. I'm sick of this phone, maybe i will sell it, because now i have installed a new version (V02) from needrom webpage and it doesn't fix the problem neither...:crying:
recovery
my device information >
1:1 Samsung Galaxy Note 3 SM900 with real Infrared,
1.2 Ghz Quad Core, 1GB RAM, 8GB ROM
Single SIM Version
Model Number SM-900
Android Version 4.3
Baseband Version N900UBUBMJ2
Kernel version 3.0.4-1598409 se [email protected] 504-18#1 Fri Nov 29 09:54:18 cat 2013
Build Number JSS15J.UBUBMJ2
You have recovery.img for it?
bogdangepeto said:
my device information >
1:1 Samsung Galaxy Note 3 SM900 with real Infrared,
1.2 Ghz Quad Core, 1GB RAM, 8GB ROM
Single SIM Version
Model Number SM-900
Android Version 4.3
Baseband Version N900UBUBMJ2
Kernel version 3.0.4-1598409 se [email protected] 504-18#1 Fri Nov 29 09:54:18 cat 2013
Build Number JSS15J.UBUBMJ2
You have recovery.img for it?
Click to expand...
Click to collapse
you have the same phone like me, read above my post ...
are you romanian ?
filip_pine said:
you have the same phone like me, read above my post ...
are you romanian ?
Click to expand...
Click to collapse
Dap, am gasit. Pentru root folosesc framaroot 1.8.1 si intru in recovery cu mobile uncle tools. Pana la urma tot nu m dau seama daca are 2,5 gb ram sau 1gbram. Am o problema la gps, adica nu merge deloc, nu prinde niciun satelit si wireless ul este praf, are sensibilitatea foarte proasta. Am bagat pana acum firmware ul V1 , V2 , V5 dar degeaba.
bogdangepeto said:
Dap, am gasit. Pentru root folosesc framaroot 1.8.1 si intru in recovery cu mobile uncle tools. Pana la urma tot nu m dau seama daca are 2,5 gb ram sau 1gbram. Am o problema la gps, adica nu merge deloc, nu prinde niciun satelit si wireless ul este praf, are sensibilitatea foarte proasta. Am bagat pana acum firmware ul V1 , V2 , V5 dar degeaba.
Click to expand...
Click to collapse
nu mai vb in romana, i dont think it´s allowed...
yeah, your phone and mine are identical, i have the same weak Wifi signal, if i´m in the same room it works good, if i move to another room i only got 1 or 2 lines...
GPS dont work, even if i tried the Engineer Mode with Uncle Tools
the phone has 1GB RAM, but it display 2.4GB...
i have the Version 2 ROM
PS : i send you a private message
josebegines said:
Frezerovschik, that doesn't work for me, i've already tried that. I'm sick of this phone, maybe i will sell it, because now i have installed a new version (V02) from needrom webpage and it doesn't fix the problem neither...:crying:
Click to expand...
Click to collapse
Hmm, have you done all wipes before and after booting GApps? I dont know, earlier I tried to flash GApps without all listed wipes and whis lead to errors. But when I did all wipes as it described above, then everything turned out!
Who knows, maybe if you will try to flash you phone again and again then eventually it will works. But I agree, thit phone is not good at all.
CWM??
Hi guys, anybody have the links where i download the CWM for 1:1 Note 3 SM N900?
Please I've looked everywhere, and not found anything:crying::crying::crying::crying:
xaxokevin said:
Hi guys, anybody have the links where i download the CWM for 1:1 Note 3 SM N900?
Please I've looked everywhere, and not found anything:crying::crying::crying::crying:
Click to expand...
Click to collapse
i already respond you and send you a private message on needrom, but i dont know if you dont want to process the information that i told you or you are NOT able to process...
there is no CWM application to be installed, forget about this stupid question that you ask everywhere... of course you will not find anything BECAUSE there is not...
you have to create your own CWM for your device, you can do this with MTKDroid Tools...
Hi guys ! I bought a fake SM-N900 to somebody but i don't know where is it from, and i have an issue with Google +, Youtube, etc … it's says Google Play services, which rely on blablabla ….
Those infos of my mobile are from CPU-Z:
Model:SM-N900 (SM-N900)
Manufacturer: Samsung
Board: SM-N900
Display: JSS15J.N900UBUBMJ12
Hardware: MT6589
Android Version: 4.3
Kernel Architecture: armv7l
Kernel Version: 3.4.5 (eng.zhanghongqiang.1385…
Screen Resolution (pixels): 720 x 1280
Screen Resolution (dp): 360 x 640
Screen Density: 320 dpi
Total RAM: 2440 MB
Available RAM: 638 MB (28%)
Internal Storage: 0,98GB
Available Storage: 0,74GB (75%)
Root Access: Yes
CPU Architecture: ARM Cortex-A15 + ARM Cortex-A7
Cores: 4 + 4
Somebody can help me ?
I have bought this tablet from amazon and it didn’t work right from the box.
model:
Proscan PLT1077G(BT/1G/8GB)
OS:
Android 4.4.2
Processor:
1.3 GHz 8803 CORTEX A8
karnel:
3.4.67
[email protected] #13
build number:
PLT1077G 20141008
custom build version:
1412756465
I’m getting the following error msg repeatedly:
“com.android.systemui has stopped”
I followed some fixes I found online – I flushed the device’s cache and did a hard factory reset, but no luck.
I searched online but couldn’t find a custom ROM for the device (probably because it is a low budget, non-branded product), so I figured my only way out is finding some kind of a generic ROM to replace the current defective OS.
I realize that a rom that isn’t suitable for my device might cause some problems, but at the moment I’ll settle for a poorly working device rather than a not working one.
My question to you is –
Is that a feasible idea? Can anyone recommend me a rom that might work given my device’s specs?
Alternatively, does anyone know a custom rom for the device or have any other course of action I should try?
Thanks and sorry for my English.
hamingway said:
I have bought this tablet from amazon and it didn’t work right from the box.
model:
Proscan PLT1077G(BT/1G/8GB)
OS:
Android 4.4.2
Processor:
1.3 GHz 8803 CORTEX A8
karnel:
3.4.67
[email protected] #13
build number:
PLT1077G 20141008
custom build version:
1412756465
I’m getting the following error msg repeatedly:
“com.android.systemui has stopped”
I followed some fixes I found online – I flushed the device’s cache and did a hard factory reset, but no luck.
I searched online but couldn’t find a custom ROM for the device (probably because it is a low budget, non-branded product), so I figured my only way out is finding some kind of a generic ROM to replace the current defective OS.
I realize that a rom that isn’t suitable for my device might cause some problems, but at the moment I’ll settle for a poorly working device rather than a not working one.
My question to you is –
Is that a feasible idea? Can anyone recommend me a rom that might work given my device’s specs?
Alternatively, does anyone know a custom rom for the device or have any other course of action I should try?
Thanks and sorry for my English.
Click to expand...
Click to collapse
I can't seem to find any custom roms for that device, and I would NOT advise you trying to install one which isn't meant for your particular device. In the past, I've faced that problem too. I ended up fixing it with a full wipe before reinstalling the stock firmware. If you haven't tried that before, I recommend you do.
I have the same Tablet and rooted mine. I could backup my rom.
i have this iphone 8+ clone and tried rooting it with kingroot, kingoroot, iroot, drphone and mtk droid tool but wont work. i cant backup stock rom until i manage to brick it. so went on searching for stock rom and tried several but nothing works. sometimes it only boot upto logo or just plain white screen usually it say 4030 or not enough space until i found one that works but the camera and flash is not working it says cant connect to the camera i checked settings-app-app running-app installed but there is no app. i tried installing camera apk but still the same is there a way to fix this or can you recommend other stock rom i could try. i dont know what to do next hope someone can help.
THANKS IN ADVANCE
iphone 8 plus clone
Model : MN4A2ZP/A
Build number : LMY47I test-keys
Build date UTC : 20180508-032544
Android v : 5.1
Kernel v : 3.10.72
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P2
Hardware : MT6580M
i flashed
MT6580__iPhone8__MN4A2ZPA__iPhone8__5.1__ALPS.L1.M P6.V2.19_BENRUI6580.WE.L_P2.rar
and now my phone is booting normally and everything seems more responsive but camera and flash not working.
i tried this and several others but doesnt work
Iphone 8 Clone Firmware [mtkfirmware.net] --error4030
S209_8P_H_EN_V0.0.5
MT6580__Symphony__V120__V120__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P89
iPhone_8_Plus_Clone_MT6580_V2.6_20180118 --not enough space
iphone i8 plus mt6580 clone firmware --soft brick (4032)
Iphone 8 Clone Firmware [mtkfirmware.net] --soft brick
MT6580__iPhone__8_Plus__iPhone__6.0__alps-mp-m0.mp1-V2.34_zechin6580.weg.m
Need Help : Correct Firmware
marad1024 said:
i have this iphone 8+ clone and tried rooting it with kingroot, kingoroot, iroot, drphone and mtk droid tool but wont work. i cant backup stock rom until i manage to brick it. so went on searching for stock rom and tried several but nothing works. sometimes it only boot upto logo or just plain white screen usually it say 4030 or not enough space until i found one that works but the camera and flash is not working it says cant connect to the camera i checked settings-app-app running-app installed but there is no app. i tried installing camera apk but still the same is there a way to fix this or can you recommend other stock rom i could try. i dont know what to do next hope someone can help.
THANKS IN ADVANCE
iphone 8 plus clone
Model : MN4A2ZP/A
Build number : LMY47I test-keys
Build date UTC : 20180508-032544
Android v : 5.1
Kernel v : 3.10.72
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P2
Hardware : MT6580M
i flashed
MT6580__iPhone8__MN4A2ZPA__iPhone8__5.1__ALPS.L1.M P6.V2.19_BENRUI6580.WE.L_P2.rar
and now my phone is booting normally and everything seems more responsive but camera and flash not working.
i tried this and several others but doesnt work
Iphone 8 Clone Firmware [mtkfirmware.net] --error4030
S209_8P_H_EN_V0.0.5
MT6580__Symphony__V120__V120__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P89
iPhone_8_Plus_Clone_MT6580_V2.6_20180118 --not enough space
iphone i8 plus mt6580 clone firmware --soft brick (4032)
Iphone 8 Clone Firmware [mtkfirmware.net] --soft brick
MT6580__iPhone__8_Plus__iPhone__6.0__alps-mp-m0.mp1-V2.34_zechin6580.weg.m
Click to expand...
Click to collapse
same here but i have blank LCD problem, have you got correct firmware bro? [email protected]
vikas7144 said:
same here but i have blank LCD problem, have you got correct firmware bro? [email protected]
Click to expand...
Click to collapse
Yeah, I have the very same model and ROM but (when I flashed this ROM) I ended up with the blank LCD issue.
I've tried several lk.bin files (someone told me that it is a resolution problem, and should install another lk.bin) but can not fix the problem.
Any suggestion?
Thanks in advance
[email protected]