I accidentally wiped all of the data instead of just the recommended wipe on TWRP. Now, I can only get to TWRP and this Moto E keeps bootlooping. Does anyone have a link to LPIS23.29-18.9-2?
Thanks,
************
I just flashed a new looking custom OS on it and it works.
Related
I've been trying some various ROMs to figure out what I do and don't like.
Latest one I tried was Hyperdrive 8.1. Downloaded, checked md5, moved to an SD card and flashed just like normal.
When it boots up after installation and selection of features, the phone states that the encryption process failed and I have to reset data etc.
I'm able to restore to a backup of another ROM through TWRP just fine, but I'm still curious as to why this might be happening.
I'm running TWRP 2.6 now, I was running the latest 2.5 build when I first tried this ROM.
I did a factory reset, cleared dalvik, system, data, and cache before every installation attempt as well.
The phone is up and running fine, didn't brick at all, but I really like the features of Hyperdrive and would like to check it out.
Any help would be greatly appreciated!
Thanks in advance.
Hello all. I have a Boost Moto E 2nd generation XT1526. I have a couple ?? and hopefully someone will be able to answer them for me. My ex put a spyware program on my phone. My first ? is there a way to completely erase the OS and put a new one on. What I mean by this is like on PCs you can write zeros to the hard drive put in a disk and install the new OS. I want to ensure that the program is not still there. I know you can flash a custom rom on (and I have done that, CM12) but it doesnt truly erase everything. My second ? is I have been using CM12 and I cannot update the PRL or Profile. When my internet starts to lag or stop period I have to revert back to reinstalling the stock rom, updating the profile and prl, then restart in recovery wipe data,cache, and delvack cache and reinstalling CM12. I have researched a lot prior to posting and I hope I have left enough info to get this answered. Thanks in advance for any help in this.
You need to download the stock firmware to your desktop. And flash the files through fastboot.
Check the thread to restore Moto e 2015 to stock. Just google it and you'll find it.
I don't think you understand what I am asking. I know how to flash the stock and custom Roms onto my moto E. Say when you are installing custom ROM you go into recovery mode and wipe system data, cache, and dalvik cache. Then you flash either the custom or stock ROM you want. When you do this you technically aren't erasing any data you are just erasing the directory structure. What I want to do but am unsure how to do without completely bricking my phone is wipe ALL the data on my phone and SD card and put a Fresh install of either a stock or CM12 ROM onto my Moto E.
Your question is answered http://forum.xda-developers.com/showpost.php?p=65927626&postcount=121
Today i wanted to upgrade from Nitrogen OS android 9 to PixelExperience android 10 and it didn't work at all...
At first i wiped:
Dalivik / ART Cache
cache
system
Data
And now I just don't know what to do, because after flashing PixelExperience, I got the message: "No OS installed! Are you sure you wish to reboot?".
After that I flashed disable force encryption and rebooted anyway just to see the fastboot screen.
Then i wiped everything again and tried flashing my old ROM without any success (error 7) after that message,
I wiped everything once more and flashed vendor-firmware (it was an old version the name of the file is: "fw_beryllium_miui_POCOF1Global_V10.3.7.0.PEJMIX")
and it still didn't work...
Now I searched online for any solutions and just downloaded a new firmware (filename: beryllium-9.4.1-9.0-vendor-firmware.zip) flashed it,
and after trying to install any of the above mentioned ROM's i got the same results.
I'm kind of desperate right now and don't know what to do. I though that i could maybe format my phone,
I saved all my important files on my PC so that isn't really a problem.
Please help me! (Please let me know if you need to know more info, I hope I didn't forget anything)
xueru said:
Today i wanted to upgrade from Nitrogen OS android 9 to PixelExperience android 10 and it didn't work at all...
At first i wiped:
Dalivik / ART Cache
cache
system
Data
And now I just don't know what to do, because after flashing PixelExperience, I got the message: "No OS installed! Are you sure you wish to reboot?".
After that I flashed disable force encryption and rebooted anyway just to see the fastboot screen.
Then i wiped everything again and tried flashing my old ROM without any success (error 7) after that message,
I wiped everything once more and flashed vendor-firmware (it was an old version the name of the file is: "fw_beryllium_miui_POCOF1Global_V10.3.7.0.PEJMIX")
and it still didn't work...
Now I searched online for any solutions and just downloaded a new firmware (filename: beryllium-9.4.1-9.0-vendor-firmware.zip) flashed it,
and after trying to install any of the above mentioned ROM's i got the same results.
I'm kind of desperate right now and don't know what to do. I though that i could maybe format my phone,
I saved all my important files on my PC so that isn't really a problem.
Please help me! (Please let me know if you need to know more info, I hope I didn't forget anything)
Click to expand...
Click to collapse
I found a old backup, that i made in twrp and after loading that, i was able to flash stuff again, sorry if i inconvenienced anyone
Same happened with me when i flashed PE 10 from PE 9 PIE..
So i flashed Letest Miui 11 (pie) via fastboot then
Installed PE 10 via twrp..
so this is the fix.
Kindly help me. I have just wiped everything on my Pocophone f1. Bootloader unlocked and I succeeded into installing custom ROM along with Gapps and its recovery with the help of boot to TWRP. I later realized the the Gapps I installed has few bugs. While I was trying to do clean installation again with some help, I booted to TWRP, wiped everything not knowing I have deleted everything on the phone. I tried to copy files I am planning to use for the clean installation and this was the screen I got: the device has either stopped responding or has been discontinued.
How can I fix it? Is there any way I can sideload or flash the ROM, the recovery with ext. storage?
tunnex190 said:
Kindly help me. I have just wiped everything on my Pocophone f1. Bootloader unlocked and I succeeded into installing custom ROM along with Gapps and its recovery with the help of boot to TWRP. I later realized the the Gapps I installed has few bugs. While I was trying to do clean installation again with some help, I booted to TWRP, wiped everything not knowing I have deleted everything on the phone. I tried to copy files I am planning to use for the clean installation and this was the screen I got: the device has either stopped responding or has been discontinued.
How can I fix it? Is there any way I can sideload or flash the ROM, the recovery with ext. storage?
Click to expand...
Click to collapse
I answered you here.
About "not knowing you deleted everything in the phone" in my Guides I mentioned it with red letters that all your data into internal storage will be lost while wiping or formating data. Wipe=delele
Hi there,
I've reinstalled my Lineage OS in May and have recently installed the latest upgrade. Today, I was using my phone just fine before a subway trip, then after it was stuck in a boot loop (lineage OS circles). My guess is that I accidentally restarted it.
What is the procedure to repair the phone without loosing the data?
I tried:
- Reinstalling recovery, lineage, MindTheGApps in that order
- Wiping the cache partition, wiping the dalvik cache
So far I have not seen any progress. Am I missing something?
I really want to avoid wiping my data as I just set the phone up two months ago.
Did you try dirty flashing the ROM zip by only Wiping the System partition but not Data? I use NikGApps and its not necessary to reflash it during a dirty flash but I flash the latest GApps build in any case. I pretty much use crDroid exclusively and dirty flashing works reliably. Not encrypted though.
Ok, so I did the following
Action -- What I think it does
Install TWRP recovery via fastboot -- to selectively wipe partitions
Wipe System -- to remove system files from the previous update
Wipe Cache & Dalvik cache -- to remove cache files that have previously been written on startup
Install lineage os -- to install a clean OS
Install MindTheGapps -- to install the Google subsystem
System reboot
Files used:
twrp-3.6.2_9-0-beryllium.img
lineage-19.1-20220618-nightly-beryllium-signed.zip
MindTheGapps-12.1.0-arm64-20220605_112439.zip
Again with:
lineage-19.1-20220716-recovery-beryllium.img
lineage-19.1-20220716-nightly-beryllium-signed.zip
MindTheGapps-12.1.0-arm64-20220605_112439.zip
Still caught in the boot loop.
I feel a bit lost here.
I did nothing special. Just installed the newest Lineage OS from the GUI and then apparently accidentally restarted it (or it crashed). This should be a common use case. I would expect there to be a guide or wiki that explains and solves this. But from my own Google searches I mostly see recommendations in the line of try wiping and reinstalling.
I am pretty sure, my data is encrypted. Does this mean I am screwed? (i.e., all not backup-ed data is lost?) Was flashing a new Lineage OS & GApps the step that doomed me?
Before the bootloop did you have TWRP installed instead of LOS recovery? Flashing the OTA update via TWRP can be problematic.
I had recovery installed. I reinstalled the Image from Lineage recovery. After this didn't work I tried it with TWRP.
Did you try flashing the build you were using before the bootloop occurred? No clue otherwise how to resolve this. Hopefully someone else can help you out.
Yes, first I tried installing only MindTheGapps, then lineageOS (last version I had) + MindTheGapps. And I tried a number of recent releases.
I also tried the most recent version and now I cannot install earlier versions anymore: "Current SPL: 2022-07-05 Target SPL: 2022-06-05 this is considered a downgrade".
I gave up. Reinstalled everything. Lost a ton of messages for which I did not have the right backup.
Depressing. Nothing I did was special. So I can expect this to happen anytime. I will improve my backup. But still, in the long term I need to find something that is reliable.
Thanks @amn1987 for the suggestions.
Use Swift Backup for backing up apps and their data, SMS, call logs etc. on a regular basis. Works very reliably. You can backup messages to Google Drive as well. Probably can schedule the backups.