each you see I'm trying to install the recovery not installed and black screen cyanogenmod 12 T.T
Have you tried using TWRP instead of CWM ?
StoneyJSG said:
Have you tried using TWRP instead of CWM ?
Click to expand...
Click to collapse
if but fails
Is it the right version of TWRP? You need to correct one for your phone in order for it to work.
Related
Hi
I'm running whitealiens rooted nandroid stock rom but I've been trying since yesterday to get into recovery to flash a custom rom, Rom Manager it tells me it's flashed the latest recovery but when I try to boot into recovery it sits on the hero splash screen, so I thought I've just flash an stock rom from HTC using RUU and it says that there is less then 30% battery even though it's at 70%, or it says there's no USB connection.
I've tried reinstalling Rom Manager, reflashing a new recovery but still the same problem, anyone on got any ideas ?
90 views and not even a single comment ?
FlanFlinger said:
90 views and not even a single comment ?
Click to expand...
Click to collapse
what´s the version of your recovery? are you tested with AMON´S RA recovery?
SERGI.3210 said:
what´s the version of your recovery? are you tested with AMON´S RA recovery?
Click to expand...
Click to collapse
Managed to fix it this morning by using "recovery-RA-hero-v1.7.0." through rom manager.
FlanFlinger said:
Managed to fix it this morning by using "recovery-RA-hero-v1.7.0." through rom manager.
Click to expand...
Click to collapse
solved it?
Yes, flashed alternative recovery through CW then downloaded the latest CW from website, renamed it update.zip then booted into recovery and installed it
FlanFlinger said:
Yes, flashed alternative recovery through CW then downloaded the latest CW from website, renamed it update.zip then booted into recovery and installed it
Click to expand...
Click to collapse
OK, ra´s recovery is better than CWM
Hi,
I am rooted and using jellybam 10.1 rom for i9100g
then i tried super su and it prompted me to update su binary
I tried normal install but it failed, so i used recovery mode(cwm) installation
Now it is stuck at the flashing logo and i tried pulling out the battery but when i power on the phone, it will still be stuck in the android flashing logo and it wont go away!
HELP!!!!
btw , i am a newbie
Zhyeo said:
Hi,
I am rooted and using jellybam 10.1 rom for i9100g
then i tried super su and it prompted me to update su binary
I tried normal install but it failed, so i used recovery mode(cwm) installation
Now it is stuck at the flashing logo and i tried pulling out the battery but when i power on the phone, it will still be stuck in the android flashing logo and it wont go away!
HELP!!!!
btw , i am a newbie
Click to expand...
Click to collapse
Hello, welcome to XDA.
You need to flash some compatible firmware using Odin or flash the JellyBam ROM again using the CWM. Did you try any of this methods?
You can find firmwares here: sammobile.com.
eduds said:
Hello, welcome to XDA.
You need to flash some compatible firmware using Odin or flash the JellyBam ROM again using the CWM. Did you try any of this methods?
You can find firmwares here: sammobile.com.
Click to expand...
Click to collapse
Well, my phone is stuck in the flashing stage and when I boot into recovery , it will also be stuck there.
Btw, can I use the the thing I first flash using Odin when flashing cwm on android 4.0.3?
Zhyeo said:
Hi,
I am rooted and using jellybam 10.1 rom for i9100g
then i tried super su and it prompted me to update su binary
I tried normal install but it failed, so i used recovery mode(cwm) installation
Now it is stuck at the flashing logo and i tried pulling out the battery but when i power on the phone, it will still be stuck in the android flashing logo and it wont go away!
HELP!!!!
btw , i am a newbie
Click to expand...
Click to collapse
You shoud recovery again stock rom....
flash room in CWM
devteam.vn said:
You shoud recovery again stock rom....
Click to expand...
Click to collapse
How should I recover if my recovery is stuck in flash loop?
Odin-flash a stock, boot it, get twrp on it through fastboot, flash a ROM. Should work.
Sent from carbon note 2 on XDA premium app
shbaldw said:
Odin-flash a stock, boot it, get twrp on it through fastboot, flash a ROM. Should work.
Sent from carbon note 2 on XDA premium app
Click to expand...
Click to collapse
Do you mean stock rom? Could I just flash CWM recovery through Odin like I did before when rooting my phone?
Hello,
Could anyone reply?
I really need my phone fixed.
I managed to get into recovery but I didn't have any spare ROMs.
CWM can't mount my external SD too.
What now?
hey guys, so iv browsed and browsed and i still cant find an answer...every time i try to flash a new rom to my verizon note 2 using twrp i get an error and then it just goes back to the rom im currently on which is jedix..is there ANY way that i can flash a rom to my phone from my computer i want to get something like cm11 please help!!!
zaksween said:
hey guys, so iv browsed and browsed and i still cant find an answer...every time i try to flash a new rom to my verizon note 2 using twrp i get an error and then it just goes back to the rom im currently on which is jedix..is there ANY way that i can flash a rom to my phone from my computer i want to get something like cm11 please help!!!
Click to expand...
Click to collapse
What version of TWRP are you on? Sounds like you need to update to the latest version.
jcollier said:
What version of TWRP are you on? Sounds like you need to update to the latest version.
Click to expand...
Click to collapse
well i tried updating it a while back and it was no help...do you know of a way i can just flash a new rom to my phone without going through twrp?
zaksween said:
well i tried updating it a while back and it was no help...do you know of a way i can just flash a new rom to my phone without going through twrp?
Click to expand...
Click to collapse
You could switch to CWM or Philz touch recovery.
jcollier said:
You could switch to CWM or Philz touch recovery.
Click to expand...
Click to collapse
and how might one go about doing that? thanks so much for the help your giveing
zaksween said:
and how might one go about doing that? thanks so much for the help your giveing
Click to expand...
Click to collapse
You can download the zip file here -> http://forum.xda-developers.com/showthread.php?t=2552655
Then reboot into recovery. Then flash the zip like you would any other. When you reboot to recovery, you will have a new recovery.
jcollier said:
You can download the zip file here -> http://forum.xda-developers.com/showthread.php?t=2552655
Then reboot into recovery. Then flash the zip like you would any other. When you reboot to recovery, you will have a new recovery.
Click to expand...
Click to collapse
alright thank you and ill let you know how that turns out!
jcollier said:
You can download the zip file here -> http://forum.xda-developers.com/showthread.php?t=2552655
Then reboot into recovery. Then flash the zip like you would any other. When you reboot to recovery, you will have a new recovery.
Click to expand...
Click to collapse
wait do i flash it through odin....the .tar.md5? or how?
zaksween said:
wait do i flash it through odin....the .tar.md5? or how?
Click to expand...
Click to collapse
See my above instructions. It is a zip file that you flash in recovery so there is no Odin involved.
jcollier said:
See my above instructions. It is a zip file that you flash in recovery so there is no Odin involved.
Click to expand...
Click to collapse
ya when i flash it just says it couldn't complete...
I have an AT&T S3 I have clockworkmod 6.0.4.7. I am trying to install cm-11-20140210-SNAPSHOT-M3-d2att.zip but every time I do the install is aborted and I get a status 7 error. I tried installing TWP but though goo manager but my recovery mode is still in clockworkmod. Please help me figure out how to install this latest version of Kit Kat rom.
Try to flash TWRP using Odin or download a recovery flashing compatible file for TWRP and flash it using your current CWM. Or just try PhilZ
Do you have an i9300 or another model number? Try asking in that model's forum.
Sent from my GT-I9300 using Tapatalk
Saad_ said:
Try to flash TWRP using Odin or download a recovery flashing compatible file for TWRP and flash it using your current CWM. Or just try PhilZ
Click to expand...
Click to collapse
It worked thank you soooo much!! Lol but with all that done Im still getting the same error and CM11 isn't installing lol
dougy.boi said:
It worked thank you soooo much!! Lol but with all that done Im still getting the same error and CM11 isn't installing lol
Click to expand...
Click to collapse
Download CM again or simply from another source and before you transfer the .zip file to your phone, compare the MD5 of both files to check if the download was successful.
dougy.boi said:
I have an AT&T S3 I have clockworkmod 6.0.4.7. I am trying to install cm-11-20140210-SNAPSHOT-M3-d2att.zip but every time I do the install is aborted and I get a status 7 error. I tried installing TWP but though goo manager but my recovery mode is still in clockworkmod. Please help me figure out how to install this latest version of Kit Kat rom.
Click to expand...
Click to collapse
This forum is for i9300 intl version of the S3.
Your device is i747. Please refer to this forum for your device.
~ RazorMC
Hi, im rooted the Z3 compact tablet successfully and tryed to install the CWM and after not worked the TWRP recovery image without success...
In the CWM app i see that both should be installed (CWM and TWRP) on my phone, but in no one i can boot it.
i67.tinypic.com/15fhe9c.png
anyone a idea to get a working recovery image/menu so that i can install CM?
Thank you for any help :good:
MoPhat
No one a idea
MoPhat said:
No one a idea
Click to expand...
Click to collapse
Are you trying to flash CM?
Yes