Has anyone used the above tool to customise any Amlogic firmware?
I used it to unpack the latest NexBox S905X 2/16Gb september firmware and all i did was add SuperSU to system/app and removed/added some apks from pre_app folder and re-packed. But the firmware refuses to boot.
I can sucessfully flash the image but the box will always boot to recovery the image of an android lying down with a exclamation mark. However I can flash back to stock firmware no problem.
Can anyone advise what i am doing wrong??
Ive not changed anything major and cant see why it would refuse to boot.
Related
Hello,
i got today a Chinese XT1605-05. I flashed the firmware and gapps with twrp from this thread.
The firmware and gapps were installed successfully. But after reboot only the boot animation stucked for around 5 minutes than the smartphone restarts into twrp. Gladly i can copy firmware files to system folder and flash again. So the smartphone isn’t bricked.
Than i tried an older lineage 16.0 firmware => same problem.
And a firmware [URL="https://forum.xda-developers.com/moto-z/development/rom-omnirom-t3881462“] from here[/URL] => same problem.
Now i have nothing running. I have no idea where i could get the right firmware file for this Chinese Version.
And the original (stock image from lenovo) firmware is only available from sources which could be infected. Not a good idea to flash this garbage.
Best regards
TUKF98
Edit:
Ok, here ist the default firmware:
https://forum.xda-developers.com/moto-z/development/moto-z-official-firmware-downloads-t3449837
But it would be better to get android 9.0 working.
Sorry, for double post. It was created by a mistake.
Edit 2:
This stock firmware does not work. Wrong zip file.
Edit 3:
It works now, the lineage version .
I watched this video. And did all steps.
Edit 4:
Now its not working anymore. Its a joke. I installed a new version of lineageOS with the same procedure it worked first.
And now it wont work. The old firmware doesnt work also. WTF. I dont know what is wrong with this thing. Its now again stucking in boot sequence with the "ball moving on the line".
Edit:
Have flashed stock firmware back via fastboot commands. What a crap phone . 100 Euros are cheap, but not as cheap that i would take this ..... .
Now i have installed the original China firmware with trojans.
You cant block this **** from recording every input. But the european firmware does not run on my phone. After flash its hanging in bootloop.
Hello,
I found that it is possibility to Install new system on a phone. I did research about this but I don't really know how I don't understand everything.
When I was searching for my phone model there were some inaccuracies.
For example: I couldn't find the proper version. I have found "firmwares" that differs by one letter and I don't know I can download it or better no :/
My Phone Specifications are:
HUAWEI Y7 Prime 2018
Model: LDN-L21
LDN-L21 8.0.0.147(C432)
EMUI Version: 8.0.0
Android System Version: 8.0.0
Custom Version: CUSTC432D1
I found a site where I can download Firmwares.
My question is: Can I download for example this version and install it?
LDN-L21 London-L21A 8.0.0.150(C432CUSTC432D1)
or I must find version that exactly match my phone specifications? And what the word "London" means here?
Could somebody tell me step by step what should I do to Install new system on my phone?
Hello.
There are 1 letter difference in model - L21A and L21B. I guess there are no really HW or SW differences, but I stayed at L21B stock rom.
London is commercial codename for that type/serie of phone. LDN-L01 to L29 are similar Huawei and Honor phones with various names (Y7 2018/ Nova 2 lite / Honor 7A/7C etc). Other line/serie has other city name.
Latest stock rom for LDN-L21B is 8.0.0.151, for now.
If your phone is not rooted, still bootloader locked, with stock recovery: use System update from Settings or boot to eRecovery, connect to WiFi and let phone download latest rom and install it automatically.
adeii said:
Hello.
There are 1 letter difference in model - L21A and L21B. I guess there are no really HW or SW differences, but I stayed at L21B stock rom.
London is commercial codename for that type/serie of phone. LDN-L01 to L29 are similar Huawei and Honor phones with various names (Y7 2018/ Nova 2 lite / Honor 7A/7C etc). Other line/serie has other city name.
Latest stock rom for LDN-L21B is 8.0.0.151, for now.
If your phone is not rooted, still bootloader locked, with stock recovery: use System update from Settings or boot to eRecovery, connect to WiFi and let phone download latest rom and install it automatically.
Click to expand...
Click to collapse
Hi can u give a firmware my ldn-l21b 8.0.0.151 thank you
Malakagay said:
Hi can u give a firmware my ldn-l21b 8.0.0.151 thank you
Click to expand...
Click to collapse
I got even newer firmware 8.0.0.159.
Original links, read by eRecovery > Flash new rom, are:
/data/update/package_cache/update.zip
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/d1/v3/beb9cc4fb2a94ad1bedd5e32386ff99b/full/update.zip
/data/update/package_cache/update_data_full_public.zip
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/d1/v3/beb9cc4fb2a94ad1bedd5e32386ff99b/full/public/update_data_full_public.zip
/data/update/package_cache/update_full_LDN-L21B_hw_eu.zip
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/d1/v3/beb9cc4fb2a94ad1bedd5e32386ff99b/full/LDN-L21B_hw_eu/update_full_LDN-L21B_hw_eu.zip
I guess that you can use some of recovery modes: stock recovery, TWRP recovery or fastboot flash. Inside every ZIP is UPDATE.app. Every *.app can be unpacked with Huawei_Update_Extractor_v0.9.9.5. Eccential partitions for flash are ramdisk, kernel, product, system, vendor, version, cust. Extracted IMGs are still packed as SPARE img, so you have to unpack them with SIMG2IMG (simg2img system.img sys.img).
Now images can be flashed with custom *TWRP* recovery or fastboot (fastboot flash system system.img).
adeii said:
I got even newer firmware 8.0.0.159.
Original links, read by eRecovery > Flash new rom, are:
/data/update/package_cache/update.zip
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/d1/v3/beb9cc4fb2a94ad1bedd5e32386ff99b/full/update.zip
/data/update/package_cache/update_data_full_public.zip
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/d1/v3/beb9cc4fb2a94ad1bedd5e32386ff99b/full/public/update_data_full_public.zip
/data/update/package_cache/update_full_LDN-L21B_hw_eu.zip
http://update.dbankcdn.com/download/data/pub_13/HWHOTA_hotaMigrate_900_9/d1/v3/beb9cc4fb2a94ad1bedd5e32386ff99b/full/LDN-L21B_hw_eu/update_full_LDN-L21B_hw_eu.zip
I guess that you can use some of recovery modes: stock recovery, TWRP recovery or fastboot flash. Inside every ZIP is UPDATE.app. Every *.app can be unpacked with Huawei_Update_Extractor_v0.9.9.5. Eccential partitions for flash are ramdisk, kernel, product, system, vendor, version, cust. Extracted IMGs are still packed as SPARE img, so you have to unpack them with SIMG2IMG (simg2img system.img sys.img).
Now images can be flashed with custom *TWRP* recovery or fastboot (fastboot flash system system.img).
Click to expand...
Click to collapse
HI thank you for your reply,can u give me ldn-l21b 8.0.0.151 because I have c432
bottom line is what is the easiest way to roll back to stock firmware and get ota becuase i tried some guides and failed?
in detail: i installed twrp and flashed lineage os 8 but it somehow dont work proberly and cant detect the sims and keep crashing so i want to rollback to stock rom i downloaded the firmware but it was .ozip extention and flashed stock recovery but when i go to select the file from internal storage it reads folders in random letters like "ydc45shabshdbha" and i cant find the ozip file so im stuck now can any one help me
You could flash the ota with twrp .. and you can rename your file. If you need any help about it ..you can knock me on telegram
Hello everyone
I have a amlogic s805 device. I flashed firmware of mxq so now I have a black screen. Now just plug in the usb port then the usb buring tool will receive it (no need to hold the reset button).
I can't find the suitable img firmware, I only have the stock zip that includes: folder data, meta-inf, recovery, system and boot.img, file_contexts, logo.img .
Please help me
Please help me!!
Re-flash Stock ROM to get rid off f all modifications you applied so far.
jwoegerbauer said:
Re-flash Stock ROM to get rid off f all modifications you applied so far.
Click to expand...
Click to collapse
I have only stock ROM zip that i just mentioned as post #1
Hi, I have a allview viva h1001 LTE, I accidentally bricked my device while trying to install twrp(custom one) and now it's bootlooping, I can't boot into recovery or fastboot mode, I tried using SP Flash Tool, but I need the original stock firmware, can someone help me?
Hi. I am also looking for the firmware for this device. There is one firmware that I tried to fill, but it does not have a native scatter and I put it together as best I could. The tablet is boot to recovery but the system does not boot. If you have the opportunity to load the scatter from your original device, then there is a chance that we will defeat this device.
If it's still relevant, then I attach a recovery from a tablet that goes into recovery. I considered the entire dump if someone can see its integrity. Here is full flash read with EFT from other tablet who too restart.
Hi. I wrote down the firmware merged with the EFT, then I downloaded the image from allview p6 pro and using CM2MTK I filled in only the system. The tablet started up but without navigation buttons, with kingorut I made a root, and installed a buildpropeditor. At the end of the build.prop added the line qemu.hw.mainkeys=0 . After the reboot, the buttons appeared. I went into the update and saw the opportunity to install the update over the air but for p6 pro. Can someone tell me where to edit so that the device thinks that it is not p6 about but Viva H1001 LTE ? Thus, download the original update and make the original firmware. Thank you.
I atach build.prop for H1001 and P6_PRO