Related
i bought a phone off ebay in december. the phone was working well and then i decided to start installing different Roms on my phone. the phone was not s-off when i was installing these roms. about two weeks ago my phone just started to restart. it does not stay on for more than a minute before it restarts and i have no idea why it is happening. i would really appreciate any help in this matter because it is really frustrating. i think it is a software problem because the phone does not restart when it is in recovery mode or if it is in bootloader mode. if there is anything...anything at all you can do to help me it would be greatly appreciated.
hvagrantz said:
i bought a phone off ebay in december. the phone was working well and then i decided to start installing different Roms on my phone. the phone was not s-off when i was installing these roms. about two weeks ago my phone just started to restart. it does not stay on for more than a minute before it restarts and i have no idea why it is happening. i would really appreciate any help in this matter because it is really frustrating. i think it is a software problem because the phone does not restart when it is in recovery mode or if it is in bootloader mode. if there is anything...anything at all you can do to help me it would be greatly appreciated.
Click to expand...
Click to collapse
It would nice if you put a title to your thread instead of just [Q].
Anyway, if you suspect its a software problem, why not just flash back to stock and see if it persists? If the problem is still there, then it's most likely a hardware issue. I would replace the battery first.
Sorry about that .. it was the first time i posted something and wasn't really sure what to do. and i replaced the battery and the problem is still there .. i flashed and it still restarted. the weird thing is that if i'm doing something it doesn't restart. like if i'm using the phone as a hotspot it doesn't restart. but as soon as i stop it restarts. or if i'm using the camera it doesn't restart.
Did you wipe/format everything before flashing/flashing back to stock? Are you on CWM or EXT4? Some more details would be helpful.
yes i did that. i used superwipe. i am also 4EX and i S-off the device also. i tried installing the stock rom but it didnt work. it is confusing because once i am in recovery the phone stays on. but as soon as i turn it on it just keeps restarting. the phone boots up and then restarts.
I've been searching the forums, and google for a while and can't seem to find a solution that works at all for me. First off, a little history. I am a n00b, and I very stupidly rooted my phone last night, without a recovery.... Actually I don't think just rooting was a big deal, it was me changing the vm heap properties that was really stupid. Why did I change it when the phone was working fine you might ask? Because I quickly gleaned over a forum post about adjusting the heap size to make your phone blazing fast, so, like any other idiot would, I did what the thread suggested, and instead of blazing fast speeds I got a boot screen logo....... forever... Talk about a huge mistake on my part....
Here's the problem,
Phone is stuck on the bootscreen, I can boot into system recovery (stock).
Android System Recovery has a message on the bottom of the screen that says "E: Cannot load volume /misc!"
I have wiped the cache partition, and did factory reset according to the manufactures website.
I cannot get ADB of Fastboot to see the device, even with drivers installed.
I do have a back up of build.prop that is unscathed, but I have no idea how to flash it, or "push" it or whatever.
I do not have CWM installed, and it appears that usb debugging is disabled.
My phone is a Kyocera Hydro. I'm using Windows 7 64bit.
I know I should never have done this, it was idiotic, and easily the dumbest thing I've done in a while. I'm hoping someone out there can help me fix this. Is it possible to put the backup of build.prop on the SD card and have it overwrite the corrupted one? Is there any hope at all?
I guess it can't be done then? I had hoped that as long as the bootscreen could come on that there was hope. Hopefully someone out there knows how to push the backup build.prop back onto the phone.
Well right now you're pretty screwed. There's no way to restore it without a custom recovery. You have 2 options -
1) Wait for someone to make a custom recovery for your phone.
2) Try to claim warranty and get it restored/exchanged at the service center. Say it just randomly rebooted and got stuck at the boot screen.
Sent from my Desire HD using xda premium
Aravoth said:
I guess it can't be done then? I had hoped that as long as the bootscreen could come on that there was hope. Hopefully someone out there knows how to push the backup build.prop back onto the phone.
Click to expand...
Click to collapse
Where did you get the phone Boost, Amazon Wal-Mart?
Sent from my KFTT using xda app-developers app
Ok, so I have a serious problem... My phone is locked and when I touch the text bar to enter the password, no keyboard comes up. Important information:
- I just upgraded to jelly bean (the official one that came out today)
- as far as I can tell, everything is working fine, i just can't unlock it
- when I touch the text bar, it makes a noise, but no keyboard comes up
- was working fine immediately after the upgrade
- I got done fixing some settings and locked the screen
- this may have something to do with changing the default keyboard to Google Keyboard (it was acting a little funny immidiately after, like it was crashing)
- I have Android Lost installed, the unlock function isn't working, but others do work
- phone is encrypted
Unless someone has some ideas for me within the next couple hours, I'm going to wipe the phone. Obviously, I would prefer to not do that.
==========================
EDIT:
I've managed to use Android Lost to make some backups of some stuff, but I'm still trying to figure out how to unlock the screen. I've found that I'm able to install apps remotely from google play if that gives gives anyone some ideas.
=============================
EDIT2:
I had another idea. If this is a problem with the keyboard, is there a way for me to change it remotely? Can I install another one via the store?
Alright... I gave up on trying to get passed the lock screen and tried doing a factory reset. I was afraid of the super brick issue, so instead of doing a wipe in recovery mode, I used Kies to reflash it. However, that did nothing. The phone started back up and acted like nothing happened. It asked me for the same password, then got to the lock screen and had the same keyboard issue.
I've tried various roms, but nothing seems to wipe the encrypted information properly. At some point, I got it to forget the password, but it still thinks that one exists. I even rooted it and tried shostock3, but when it boots, it asks for a password. The old password doesn't work, so I can't get passed it. I tried entering the "wrong" password many times and it said it would wipe the phone, but it just restarted to the SAMSUNG boot screen and just sat there. I pulled the battery after half an hour...
I should note that stock gingerbread seems to work fine...
Does anyone have any ideas on how to wipe the encrypted data?
If you can push apps to it, try pushing an app like no lock or something.
Short answer: No.
It is probable that encryption information is stored in the efs (encrypted file system) folder. That's where the imei and other critical stuff is stored. I don't believe anyone who posts here in the I777 forum really has a grasp on how phone encryption works though. I've only seen one other person post here who had an issue with an encrypted phone, and he was unable to solve his problem as far as I know.
If you have a proper backup of the efs partition from before the phone was encrypted, it is possible that you could solve the problem by restoring that partition. But I'm not even sure you could write to that section of the phone memory with adb with the phone in it's current state. Edit: if you can boot into stock gingerbread normally, then you can restore an efs backup, if you have one.
I'm guessing you could send it to Samsung and they could fix it for you probably.
I finally got it working. I'm not sure what combination of things did it, but I had to restore it to stock jelly bean (via kies) to get it to wipe the encryption. I guess the stock rom knows how to properly wipe it when you keep entering the wrong password. After I got it all cleaned up, I put shostock3 back on. When the battery charges back up, I'm going to try encrypting it again (in shostock).
However, now I found another issue (may or may not be a real problem). I wanted to check if the phone was still unlocked, so I dialed *#SIMLOCK# and it says "Connection problem or invalid MMI code."
Tada!
Creepy, my good friend, would be referring to me and as you know SCIU I didn't ever get it to unlock the phone. Oddly enough a stock ICS rom (my mom now has my phone right up the road so I may try this to see if it will work and then go back to ShoStock3) works fine. I have nothing hidden from the phone storage, everything shows up, it is actually unlocked and rooted though not a custom bios err firmware/ROM because when that is put on there the encryption issues come back and the password is asked for. If the correct password is entered (and my KEYBOARD comes up but I didn't change it from the Android/Samsung one) it proceeds to enter whatever it is supposed to (my guess is the POST area like on a computer when it is entering Windows/Linux, etc.) but the screen stays black (ShoStock logo doesn't even appear if I remember correctly or it does show then goes to black loading screen with the Samsung logo and that is it, perm stuck). However I did try flashing back to Gingerbread ROMs and ICS ROMs though not through official KIES.
SCIU I may have to give this a try if my mom don't mind it and see if that helps fix the problem. Thanks for starting this thread. I am sorry I didn't respond to the PM you sent me (my LGOG, Triple OG, OG, TRIPLE OG, Optimus G AT&T Phone has screen cracked twice and is unresponsive on two different phones so I sent that in to warranty repair [rapid heating and cooling issues]) and haven't been on XDA for a week. If there is anything else you need to ask or bounce ideas off of me then I am all for it.
As far as encryption goes, the process works the same as any other encryption algorithms used (MD5/HASH/SHA-!, etc.) using a basic replica of most file systems although mobile storage tends to work a tad differently. Unfortunately, the freezer trick, brute force, nor any other cracking methods I was able to try at home worked to get it to open up. I tried getting into the EFS area of the phone but never could get to the directory or have it display.
Again thanks SCIU and as I stated I may give this a try if my mom don't care.
Eagle
i've the same problem here but i cann't use kies when my phone is locked .... so what can i do??
rawan-omer said:
i've the same problem here but i cann't use kies when my phone is locked .... so what can i do??
Click to expand...
Click to collapse
You can get the full stock jelly bean Odin flashable tar in the Download Repository. See link in my signature. According to sciguy125, flashing stock jb and then inputting repeatedly the wrong password will clear it. I'm not sure how many times it takes, 5 or 10 I think. I've never worked with an encrypted phone. I'm just repeating what I have read others say. I've seen the above posted by at least one other person. You should be able to flash the stock firmware using Odin. The one you want is I777UCMD8
my phone screen is locked (with word password) , Huawei, and the keyboard doesnt show up when i click the box? tried reseting it, cant go to settings whatsoever! i didnt damage my phone in any way either. need help asap!!
moselyy said:
my phone screen is locked (with word password) , Huawei, and the keyboard doesnt show up when i click the box? tried reseting it, cant go to settings whatsoever! i didnt damage my phone in any way either. need help asap!!
Click to expand...
Click to collapse
Friend, this is the forum for the S2 (Samsung), so you won't find anything about Huawei devices here - best to ask your question in the forum for your device.
That being said if you are rooted and have a custom recovery, simply power the device off and boot into recovery and perform a factory reset from there. If that doesn't work do a full wipe (this means wiping /system), then re-flash the ROM/gapps.
me too!!! do you have some tips for me?? i almost fainted when i knew that the keyboard isnt working.... i do have a lot of important files in my phone.
Easy, you fools! JUST KIDDING lol Connect an external keyboard. Restart the phone with the keyboard plugged in and you'll have one chance to input the pass every time you restart. Good luck, bosses!
my phone screen is locked (with word password) , SAMSUNG GALAXY TAB 3V, and the keyboard doesnt show up when i click the box? tried reseting it, cant go to settings whatsoever! i didnt damage my phone in any way either. need help asap!
My sumsang keyboard has stopped I cannot do nothing because is secure by password can you help please
I got the same problem but everything on my phone is fine except it doesn't let me enter the password I dnt wanna factory reset it cause I got important pictures in it any suggestions on how to get my keyboard working.
Solution that worked for me
Hello all,
I usually don't post things around, but something told me to do this, since I don't see any threads talking about this solution.
My solution was the following:
Went to google play store on my computer via chrome. Logged in to the user attached to my play store and re-installed all keyboard apps I have.
That worked beautifully and hope this helps other people!!
Alright. I need some advice one last time, I swear... after this I'm not going to try to do anything.
Phone worked quite well for 2 days. I was enjoying this rom quite a bit. I decided to change the DPI down to 560. I saw that some others in this thread had done so quite easily... so I used this app to change it. Made the change to 560, granted supersu permission and rebooted. Only problem is that... the phone has yet to turn back on. At the moment the only thing I can get it to do is give me a screen that shows a large white empty battery with a cable leading up to it and a hazard exclamation mark in the bottom right when I am trying to put it in download mode. I have tried on multiple computers to restore back to stock following these directions. The best that happens is my computer recognizes an unrecognized device. No luck.
I would love to change the buildprop back or anything, but not even adb recognizes the device.
Otherwise, nothing. I can't get into recovery. I can't get the phone to start at all. All black screen. I can't get any reaction out of it. Any advice would be helpful, I'm on hour two of this. I realize that this is most likely not a problem with the rom, but wanted to see if anyone else had an issue and has advice/let anyone else who's thinking of changing the DPI and shared my troubles reconsider.
Thanks again!
The empty the battery logo is because the phone is dead try charging it for like 30 mins. Also it seems that app you used is 3 years old so it does not support lollipop or even kitkat. After charging it try get it into recovery and restore a backup. If you don't have a backup try wiping your data and cache.
1619415 said:
The empty the battery logo is because the phone is dead try charging it for like 30 mins. Also it seems that app you used is 3 years old so it does not support lollipop or even kitkat. After charging it try get it into recovery and restore a backup. If you don't have a backup try wiping your data and cache.
Click to expand...
Click to collapse
Thanks for the reply!
That emblem only shows up when the battery is removed and I'm trying to put the phone in download mode. So it makes sense. Any other ideas? The battery that I'm using is about 80% full. I still can't find a way to recovery mode.
What other information can I provide to help you out?
Well when your in download mode it does not take any commands can you get the lg powered by android screen? Or just nothing happens? If nothing at all happenes it is most likly bricked. If it boots to the lg screen it is most likly soft bricked.
Bricked- Phone is dead and very very hard to fix if there is a fix
Soft Brick- No OS so you have to reinstall a rom could also be, because of apps.
1619415 said:
Well when your in download mode it does not take any commands can you get the lg powered by android screen? Or just nothing happens? If nothing at all happenes it is most likly bricked. If it boots to the lg screen it is most likly soft bricked.
Bricked- Phone is dead and very very hard to fix if there is a fix
Soft Brick- No OS so you have to reinstall a rom could also be, because of apps.
Click to expand...
Click to collapse
No screen. For anything (other than described).
This is exactly what I was afraid of, but my phone has always been odd. This dead battery screen has always shown up in download mode... even when my phone worked, I've never had the firmware update screen. Which has always been weird to me.
However, the only time my phone shows anything is with the dead battery screen. During such it will show up as an unrecognized device when attached to a computer, again... it's always done this. I was just curious if there was something else or a suggestion that someone more experienced then myself might have.
No that I read it, it sounds like there maybe a very slim chance of getting your device to work. If you mange to get some drivers for the unreconized device driver you maybe able to send adb and fastboot commands. I found this one tool (will limk below) that is call cydia impactor I found in one of rootjunky's toolkit files. I used this one function that was able to make drivers for my sony smartwatch 3 and phone. I will link for the direct download make sure to extract the zip. Inside of the zip you will find another zip called "Impactor_0.9.14.zip" make sure to extract it to it's own folder. If you want you can delete the first folder juat save the impactor folder. Then run the program called "Impactor" can connect your phone to the computer and click on the tab called "USB" then click the button called "Driver Scan". Follow any on screen instructions. It should now generate a driver for your phone if all went well and it will be reconized. Then you should be able to run adb reboot recovery or fastboot reboot-bootloader. The fact that your computer is even seeing the phone tells me that it has so hope of being fixed because your computer see's it. Your device might be in a bootloop of some sort. You may just have no os installed and it may have just glitched.
Download: http://rootjunkysdl.com/getdownload.php?file=Tegra Note 7/ADB root.zip (will immeditly download it)
Worst case scenario, you may try this, or at least read it for general info. I don't think you'll have to go this far though
http://forum.xda-developers.com/showthread.php?t=2582142
[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2
i changed my dpi once and it bootlooped on me. i was lucky enough to get into recovery and then i restored the data partition from an older nandroid.
i agree with 16. it does sound like the drivers may not be loaded up properly if your computer recognizes a device. have you tried the official lg drivers?
What system are you guys running?
Well, I've found out that for whatever reason... on my phone I have to take out the battery for a period of ~5-10 mins on any change DPI, system rom update, anything. Otherwise, my phone will not turn on. So if someone else find this, give it a try.
I recently rooted my Lg G stylo (Metro). I was messing around with the Clockwork Mod Recovery. Long story short, I had to reboot into recovery but I keep getting a "Secure Booting Error" "Error code 1003". It keeps restarting over and over again and the same message keeps popping up. The screen doesn't pass the logo, it just shuts down after the error message shows up. repeat
There is no way to access the homescreen or anything. I trying to factory reset by holding the VOLUME DOWN + POWER KEY. It works. I get a menu that says Perform a factory reset , [Yes/NO]. When i click yes, the reset begins but after a while it shuts down and continues to repeat the same message. "Secure booting Error". "Error Code 1003". I have also been able to acces download mode where the screen would say firmware update/Usb. But idk what to do after that. Im pretty sure its not bricked since it still turns on.
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
I have the same problem
mnunez12 said:
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
Click to expand...
Click to collapse
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Did figure how to recover phone?
ProblemMaker said:
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Click to expand...
Click to collapse
i have the same problem
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
FIXED
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
Thanks. I finally fixed it thanks to this!!!!!
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
T mobile kdz file ?
soccereclipse087 said:
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
Click to expand...
Click to collapse
Did you get a answer? Also where can I find the kdz file?
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
botbro86 said:
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
Click to expand...
Click to collapse
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
I actually did GT steps right after this post. Im now back on Katana and learned from my mistakes lol
I accidentally used king root without developer mode enabled
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery. How do I fix this?!?!?!
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
Micgizel said:
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
Click to expand...
Click to collapse
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery.
What if you cant get the phone to do anything outside of the boot loop?
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
sherryf said:
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
Click to expand...
Click to collapse
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
br0adband said:
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
Click to expand...
Click to collapse
Thank you so much for responding to me even though you couldnt help. . i appreciate that..
is there a way to fix it
arbyn said:
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
Click to expand...
Click to collapse
Sorry for the bump on this thread. I followed the unbrick guide mentioned here, and all seems like a GO... except a lost service. Screen Lock says "No Service", but I am receiving text messages from contacts.
lg ls770 (boost)
Lg stylo ls770 boost
My stylo is showing the same error 1003 and on bootloop. Can someone help me figure out where to go to get the fIles to restore it back to stock.
PM or email me if you can help TIA
help
the issue im running into using the tutorial to flash the metro kdz is it says it got disconnected from the server. any ideas?