Who knows a way to bypass for FRP lock (Google verification) on a LG G3 Verizon? All the ways online seems to have been patched, e.i.: using the bypass tool by tungkick, using the apk bypass is blocked because of of an unlockable "install from unknown sources" button, force stopping and disabling the set up wizard app. All of these methods don't seem to work at all. Is there another work around to this?
Same doubt here, with Marshmallow 6.0 - LG G3 VS985 (Verizon).
Just curious, if you're rooted and have TWRP installed, can it still factory reset successfully in this circumstance (since Factory Reset would only launch TWRP but otherwise do nothing).
I'm not knowledgeable as to whether FRP would use some other built in method to reset that doesn't rely on the stock recovery, like I said, just curious.
Apology_Sloth said:
Who knows a way to bypass for FRP lock (Google verification) on a LG G3 Verizon? All the ways online seems to have been patched, e.i.: using the bypass tool by tungkick, using the apk bypass is blocked because of of an unlockable "install from unknown sources" button, force stopping and disabling the set up wizard app. All of these methods don't seem to work at all. Is there another work around to this?
Click to expand...
Click to collapse
Only way I know of is you have to use the Google account that was set up for FRP. If you don't have that account, then you are SOL as far as I know.
Related
I got a Moto E off eBay with a google account tied to it and I can't get the bootloader unlocked b/c I can't access the settings screen.....so its currently FRP locked. Is there a way to downgrade the firmware back to 5.0.2? I think that may help b/c when i try to unlock the Bootloader on 5.1, it tells me to enable OEM unlocking but I can't get to that screen....I don't think 5.0.2 has that option so it should just let me unlock bootloader...
Dvdxploitr said:
I got a Moto E off eBay with a google account tied to it and I can't get the bootloader unlocked b/c I can't access the settings screen.....so its currently FRP locked. Is there a way to downgrade the firmware back to 5.0.2? I think that may help b/c when i try to unlock the Bootloader on 5.1, it tells me to enable OEM unlocking but I can't get to that screen....I don't think 5.0.2 has that option so it should just let me unlock bootloader...
Click to expand...
Click to collapse
Could try flashing the applicable firmware (http://forum.xda-developers.com/moto-e-2015/general/stocks-firmwares-moto-e-t3113235) via RSD Lite. Since it's officially signed by Motorola you don't need to unlock the bootloader.
However, the OEM Unlocking toggle you're talking about (in Settings > Developer Options) is in fact present in 5.0.2, at least in the XT1527/XT1528 5.0.2 firmwares.
so i guess i have a paperweight then....GRRR....
RSD Lite don't even see my phone
Sorry to bump an old thread but the problem is that the *#*#4636#*#* code does nothing from the dialer. Could we possibly downgrade to an older version with an older dialer???
can "google now" able to open settings? its showing me upgrade ply service to work "google now".
himu_joy said:
can "google now" able to open settings? its showing me upgrade ply service to work "google now".
Click to expand...
Click to collapse
Yes you can open any app with google now. Just type settings in the search bar and click the link(you dont have to be connected to internet). go to security and factory reset. FRP will be removed after reboot.
Chinyig said:
Yes you can open any app with google now. Just type settings in the search bar and click the link(you dont have to be connected to internet). go to security and factory reset. FRP will be removed after reboot.
Click to expand...
Click to collapse
thanks for reply but It doesn't work. in offline it says "found nothing" and when internet connected it says "update play service for make it work".....
Accessed Settings But Still No Joy
Used this method to access settings https://www.youtube.com/watch?v=B4sQ73IoHQc but still no joy for me.
Trying to switch to guest user just puts you back into primary user, can't access developer options and factory reset button greyed out (XT1506). Hopefully someone else may have joy with one of these methods as I see they do work on others models/firmware.
So my friends phone is stuck at the account verification screen after a factory reset. The owner isn't tech savvy so he asked someone to setup a google playstore account for him. So when there was problem with the phone and the screen blacked out I factory reset the phone. Everything came back but he doesn't know the google account that was used so now it's stuck during setup. Note the japanese keyboard trick doesn't work on this model cause it's not the same one in the tutorials there's no keyboard settings to view the privacy policy but I was able to get to the dialpad by viewing the motorola privacy policy at the user agreement screen and following the same instruction. My issue is that the test mode code *#*#4636#*#* doesn't bring up the test menu so I can't get to the settings to enable ADB debugging. Is there an alternative dialing sequence for this model? The other thing I wanted to try was to flash a different stock rom on this and maybe the dial sequence would work there. Other people had success doing that on other phones. So is it possible to flash a stock rom from say a xt1527 to the xt1528. My idea is even if the rom is buggy once I can get through the account verification to remove the google account I can re-flash the stock rom for the xt1528 back.
Can't flash a different ROM. The XT1528 has a locked bootloader.
xtermmin said:
Can't flash a different ROM. The XT1528 has a locked bootloader.
Click to expand...
Click to collapse
thanks, I was hoping that since the hardware was the same it would accept a stock rom from another carrier without the need to unlock the bootloader.
dknlght said:
thanks, I was hoping that since the hardware was the same it would accept a stock rom from another carrier without the need to unlock the bootloader.
Click to expand...
Click to collapse
have u got any luck bro?
um on same problem bro, from two weeks!! google said 72 hours but I got no luck!! what a shame google!!
have u tried to downgrade 5.0?? is there same security exists??
dknlght said:
thanks, I was hoping that since the hardware was the same it would accept a stock rom from another carrier without the need to unlock the bootloader.
Click to expand...
Click to collapse
hey man, I've able to set screen lock, set name..but then setup wizard crashed. and found shortcut *#*#426#*#* and *#*#759*#*# those working.
would u try once plz?
i try these codes and it gives some options but dont understand these
Someone has managed to remove the account to this device? how?
I have tried many methods circulating online, but nothing works. At least I could open :
Maps
Youtube
Verizon Messages
Bluetooth (only pairing devices)
Chrome
Camera + gallery & dialer (via lockscreen)
[DMP said:
;68467657]I have tried many methods circulating online, but nothing works. At least I could open :
Maps
Youtube
Verizon Messages
Bluetooth (only pairing devices)
Chrome
Camera + gallery & dialer (via lockscreen)
Click to expand...
Click to collapse
Same here. I got a FRP locked xt1528 given to me. After wrestling with all known methods I could find, I finally reached the realization that I couldn't pull it off. I parted the device out on eBay. I'll give credit where credit is due. That's the most rock-solid FRP I've ever encountered. I bypassed a new Galaxy s7 in only a few days. That was child's play in comparison to the xt1528.
Sent from my Moto E LTE (2nd gen) using XDA Labs
sounds like i got further along than you guys.
I was able to able to get into the settings on an frp locked xt1528. But I was still unable to bypass frp. Tapping on build did not enable debug. factory reset was greyed out. I was able to enable unknown sources and use chrome to download apks then launched the downloads gui to access the download folder then i tried to install the apks from the download folder but the install button was disabled so all i could do was cancel the install. Its locked up real tight.
I tried disabling setup but that didn't help.
update:
I was able to to get around the disabled next/install button and launched gsf.login to try the browser sign in but it doesn't sign in to google and keeps giving me the error : "there was a problem communicating with google servers ...". then I tried to take over with test dpc but it did not give the option to take ownership of the device but it has option for work profile. I added a work profile and i tried to add a work email and there was no message that the device was reset but the gmail account was not added because of the google servers error. I am hoping to add a tutorial once i succeed. Also factory reset needs root to be launched.
update 2
I managed to unblock the factory data reset in the menu but the phone was still frp locked after resetting through the menu.
Any suggestions?
update 3
I fully bypassed the frp and added a google account. I'll post a tutorial when I can.
monsta182003 said:
sounds like i got further along than you guys.
I was able to able to get into the settings on an frp locked xt1528. But I was still unable to bypass frp. Tapping on build did not enable debug. factory reset was greyed out. I was able to enable unknown sources and use chrome to download apks then launched the downloads gui to access the download folder then i tried to install the apks from the download folder but the install button was disabled so all i could do was cancel the install. Its locked up real tight.
I tried disabling setup but that didn't help.
update:
I was able to to get around the disabled next/install button and launched gsf.login to try the browser sign in but it doesn't sign in to google and keeps giving me the error : "there was a problem communicating with google servers ...". then I tried to take over with test dpc but it did not give the option to take ownership of the device but it has option for work profile. I added a work profile and i tried to add a work email and there was no message that the device was reset but the gmail account was not added because of the google servers error. I am hoping to add a tutorial once i succeed. Also factory reset needs root to be launched.
update 2
I managed to unblock the factory data reset in the menu but the phone was still frp locked after resetting through the menu.
Any suggestions?
update 3
I fully bypassed the frp and added a google account. I'll post a tutorial when I can.
Click to expand...
Click to collapse
Can you please post a guide for that? I have 2 Phones usseles.
monsta182003 said:
sounds like i got further along than you guys.
I was able to able to get into the settings on an frp locked xt1528. But I was still unable to bypass frp. Tapping on build did not enable debug. factory reset was greyed out. I was able to enable unknown sources and use chrome to download apks then launched the downloads gui to access the download folder then i tried to install the apks from the download folder but the install button was disabled so all i could do was cancel the install. Its locked up real tight.
I tried disabling setup but that didn't help.
update:
I was able to to get around the disabled next/install button and launched gsf.login to try the browser sign in but it doesn't sign in to google and keeps giving me the error : "there was a problem communicating with google servers ...". then I tried to take over with test dpc but it did not give the option to take ownership of the device but it has option for work profile. I added a work profile and i tried to add a work email and there was no message that the device was reset but the gmail account was not added because of the google servers error. I am hoping to add a tutorial once i succeed. Also factory reset needs root to be launched.
update 2
I managed to unblock the factory data reset in the menu but the phone was still frp locked after resetting through the menu.
Any suggestions?
update 3
I fully bypassed the frp and added a google account. I'll post a tutorial when I can.
Click to expand...
Click to collapse
You are the man ....so glad somebody finally broke through the many barriers.
If u have solution plz share i have 2 pieces in hand which is unable to bypass FRP till now.
monsta182003 said:
sounds like i got further along than you guys.
I was able to able to get into the settings on an frp locked xt1528. But I was still unable to bypass frp. Tapping on build did not enable debug. factory reset was greyed out. I was able to enable unknown sources and use chrome to download apks then launched the downloads gui to access the download folder then i tried to install the apks from the download folder but the install button was disabled so all i could do was cancel the install. Its locked up real tight.
I tried disabling setup but that didn't help.
update:
I was able to to get around the disabled next/install button and launched gsf.login to try the browser sign in but it doesn't sign in to google and keeps giving me the error : "there was a problem communicating with google servers ...". then I tried to take over with test dpc but it did not give the option to take ownership of the device but it has option for work profile. I added a work profile and i tried to add a work email and there was no message that the device was reset but the gmail account was not added because of the google servers error. I am hoping to add a tutorial once i succeed. Also factory reset needs root to be launched.
update 2
I managed to unblock the factory data reset in the menu but the phone was still frp locked after resetting through the menu.
Any suggestions?
update 3
I fully bypassed the frp and added a google account. I'll post a tutorial when I can.
Click to expand...
Click to collapse
Can you please tell us how you did it?
would really appreciate it.
i also need this solution to unlock phones
so no solution yet?
I recently tried my hand at this with a phone of the same model, but from consumer cellular, managed it, posted it here
https://forum.xda-developers.com/moto-e-2015/general/guide-xt1528-bypass-frp-t3535247
arolust said:
I recently tried my hand at this with a phone of the same model, but from consumer cellular, managed it, posted it here
https://forum.xda-developers.com/moto-e-2015/general/guide-xt1528-bypass-frp-t3535247
Click to expand...
Click to collapse
That method doesn't work for the Verizon variant.
I have a Verizon Moto. Z force and it's Google locked it's on Android 7.0 and nothing works for me ? is there a way to clear this ?
Thanks for your time.
Sent from my XT1585 using Tapatalk
there is a build for the verizon xt1528 that has play services updated, allowing to open apps using google search. previous build to that one does not have that advantage.
Hello all,
Hopefully I can get some help here. I recently purchased a T Mobile LG V10 off of eBay. When I turned it on, I got the dreaded "This device was reset. To continue, sign in with a Google Account that was previously synced on this device." message. I researched all suggested ways to bypass the FRP lock but I keep running into snags at every turn. I've managed to download the Bypass Samsung Google account verification app apk and navigate to the file system (without split/dual screen) but I cannot enable the 'install from unknown sources' option to run the apk. (its greyed out) Am I stuck or is there another route? I've tried contacting the seller again, but he/she has gone m.i.a. Figures. Please assist.
Thanks!
Try this
I would try this:
https://forum.xda-developers.com/tm...-how-to-bypass-frp-verify-account-lg-t3776129
Or this:
https://youtu.be/LfWyeVsb7Yc
I also have a Google FRP locked T-Mobile LG V10 phone but I could not try neither of these methods because:
1. My unit is missing a USB port .
2. I don't have a T-Mobile SIM card because I live in Europe.
All the other methods I tried did not work.
Please let me know if you succeed
Hi there!
I found an LG G6 with cracked screen in the trash. There was no SIM-Card and no SD-Card in there, but it still seems to work. It has encrypted userdata so I couldn't boot it to see if there's any contact info displayed.
I found I could factory reset the phone by getting into the stock recovery and switching to yes two times.
Now it boots but it will not allow me to enter the phone without giving it an internet connection and logging in with a previously used google account. Since I found this phone and was not able to find out who the previous owner was I of course do not have a google account that was used on the phone previously.
I also booted into fastboot but can't do anything because the bootloader is locked, and it of course was not left by the previous owner with the developer option to allow for unlocking set.
Is there some way to get this phone operational again so it can be used for something more than spare parts (minus the main-board)?
Thank you!
Why dont you flash kdz file? From lg-firware. Com . Oh wait if you cant see imei if you cant get inside phone...
Ah, that's an idea, I will try that. Thank you for the tip. Unsure if a stock ROM flash will reset that google account lock, but I guess it doesn't hurt to try.
hagekic548 said:
Ah, that's an idea, I will try that. Thank you for the tip. Unsure if a stock ROM flash will reset that google account lock, but I guess it doesn't hurt to try.
Click to expand...
Click to collapse
Does it work?
Sadly, no. I tried a few of the LG Tools.
"LG Mobile Support Tool" could connect and told me there is an update available and I should use "LG Bridge" to install that.
"LG Bridge" won't connect because it tells me it requires an MTP connection and I need to allow acccess to "telefon data" if Android 6 or later is installed (which quite certainly is).
Since the phone doesn't let me in (only shows me the first setup wizard which I can't pass without the google account of the previous owner) I can't enable file sharing or accept any requested permissions.
UPDATE: Ah, now I found an "correct update problems" button in "LG Bridge", with this he started downloading 3.28GB worth of firmware, let's see whether he will manage to flash that after downloading it and if so if that does remove the google account lock.
UPDATE2: So I've researched a bit more and found that what my problem is (phone locked to previous google account) is called "FRP Lock" = Factory Reset Protection.
There are a few guides that show how you can use the accesibility feature talkback to get to youtube which allows you to open chrome which allows you to open the phone app. This allowed me to get my IMEI using the *#06# code.
But so far I could not find a phone app code that opens a service menu on this LG G6 H870 which would be required to follow the FRP guides further.
UPDATE3: haha yes the "correct update problems" procedure from "LG Bridge" updated to a newer firmware while leaving my wifi config I've entered during the UPDATE2 step but removing the "FRP Lock".
deleted accidental post
hagekic548 said:
Sadly, no. I tried a few of the LG Tools.
"LG Mobile Support Tool" could connect and told me there is an update available and I should use "LG Bridge" to install that.
"LG Bridge" won't connect because it tells me it requires an MTP connection and I need to allow acccess to "telefon data" if Android 6 or later is installed (which quite certainly is).
Since the phone doesn't let me in (only shows me the first setup wizard which I can't pass without the google account of the previous owner) I can't enable file sharing or accept any requested permissions.
UPDATE: Ah, now I found an "correct update problems" button in "LG Bridge", with this he started downloading 3.28GB worth of firmware, let's see whether he will manage to flash that after downloading it and if so if that does remove the google account lock.
UPDATE2: So I've researched a bit more and found that what my problem is (phone locked to previous google account) is called "FRP Lock" = Factory Reset Protection.
There are a few guides that show how you can use the accesibility feature talkback to get to youtube which allows you to open chrome which allows you to open the phone app. This allowed me to get my IMEI using the *#06# code.
But so far I could not find a phone app code that opens a service menu on this LG G6 H870 which would be required to follow the FRP guides further.
UPDATE3: haha yes the "correct update problems" procedure from "LG Bridge" updated to a newer firmware while leaving my wifi config I've entered during the UPDATE2 step but removing the "FRP Lock".
Click to expand...
Click to collapse
So , you can use it now? If frp lock is removed....
Service menu i know is *#546368#*870# for you. Mine is h873 , but sadky i shouldnt factory reset at first , now i am stuck with no data or call . cannot get sim card configuration settings.
surfshark said:
So , you can use it now? If frp lock is removed....
Click to expand...
Click to collapse
yes, it can be used now, thank you for your help!
The "correct update problems" button in "LG Bridge" did the trick.
The stuff I've described in the "UPDATE2" block was just what I was trying while waiting for the huge download to finish, but it didn't lead to anything. Though it did allow me to get the IMEI by giving me access to youtube, chrome & the phone app.
hagekic548 said:
The "correct update problems" button in "LG Bridge" did the trick.
The stuff I've described in the "UPDATE2" block was just what I was trying while waiting for the huge download to finish, but it didn't lead to anything. Though it did allow me to get the IMEI by giving me access to youtube, chrome & the phone app.
Click to expand...
Click to collapse
Ahh ok! Not many ppl response here. I am new too here but couldnt get any answers i am looking for but. Good that it works for you.
yes, it seems XDA's best days lie behind it sadly. They seem to make it deliberately hard to actually reach the device specific forums instead of their curated blog stuff nowadays.
hagekic548 said:
yes, it seems XDA's best days lie behind it sadly. They seem to make it deliberately hard to actually reach the device specific forums instead of their curated blog stuff nowadays.
Click to expand...
Click to collapse
If you know or came across on this site about how to fix data signal blocked or in other words message and call blocked or how to flash any modem of the g6 without rooting do let me know.
surfshark said:
So , you can use it now? If frp lock is removed....
Service menu i know is *#546368#*870# for you. Mine is h873 , but sadky i shouldnt factory reset at first , now i am stuck with no data or call . cannot get sim card configuration settings.
Click to expand...
Click to collapse
Has anyone had difficulty bypassing from due to being unable to update YouTube? That's the issue I've been having
Hello! So I am on a journey to attempt to root a Samsung tab a7 lite sm-t227u. So I want to be extremely transparent as to my reason for rooting:
I was given this tablet by my father whom got it from a previous job. When he left the job they never asked for it back, a long with a good bit of supplies he had that he got to keep.
So, I have this tablet, I can get into it as it doesn't have a passcode. I have wiped it by factory reset as well. However, it has IBM's MAAS360 installed and after factory reset AND a firmware flash using odin I still cannot get rid of this maas360 mdm. It is not Knox locked. I can activate developer mode and change all those settings, but I cannot download any apps through the app store at all or enable unknown source app install as those are under an IT block. I also do not have the OEM unlock option in dev options. I've tried the whole changing the date and connecting to wifi, with and without sim card but I cannot get this option to show, nor can I unlock the bootload through fastboot.
I have read that most of the new samsung phones do not have a bootloader unlock option, but from what I can tell that is specific to the snapdragon phones, and this tablet is running a mediatek chip.
Now, if I can remove mdm restrictions without rooting that's great, but I have a feeling that is the only way to properly flash this thing to completely remove the mdm.
I have tried the recovery tar that is posted in this forum but I cannot get it to flash, likely because I still don't have an unlocked bootloader
Have any of you all faced something similar or know of a solution? I may call the company the mdm is managed by and just see if they will remove it from their system, but I find it highly unlikely.
SM-T227U is an American model wich doesn't have the OEM unlocking option, you could unlock using unofficial ways but those are not pretty "stable".
coocooguy246 said:
Hello! So I am on a journey to attempt to root a Samsung tab a7 lite sm-t227u. So I want to be extremely transparent as to my reason for rooting:
I was given this tablet by my father whom got it from a previous job. When he left the job they never asked for it back, a long with a good bit of supplies he had that he got to keep.
So, I have this tablet, I can get into it as it doesn't have a passcode. I have wiped it by factory reset as well. However, it has IBM's MAAS360 installed and after factory reset AND a firmware flash using odin I still cannot get rid of this maas360 mdm. It is not Knox locked. I can activate developer mode and change all those settings, but I cannot download any apps through the app store at all or enable unknown source app install as those are under an IT block. I also do not have the OEM unlock option in dev options. I've tried the whole changing the date and connecting to wifi, with and without sim card but I cannot get this option to show, nor can I unlock the bootload through fastboot.
I have read that most of the new samsung phones do not have a bootloader unlock option, but from what I can tell that is specific to the snapdragon phones, and this tablet is running a mediatek chip.
Now, if I can remove mdm restrictions without rooting that's great, but I have a feeling that is the only way to properly flash this thing to completely remove the mdm.
I have tried the recovery tar that is posted in this forum but I cannot get it to flash, likely because I still don't have an unlocked bootloader
Have any of you all faced something similar or know of a solution? I may call the company the mdm is managed by and just see if they will remove it from their system, but I find it highly unlikely.
Click to expand...
Click to collapse
Hey man! Still got your tab 7? I also have a SM-T227U and have oem unlocked! After doing the usual stuff, you will want to turn off automatically update in developer settings. After that, go to settings>General management>Date and time and select manual time and date, and set it for exactly 10 days before the day you attempt this. OEM unlock will appear in dev settings!!!
Then turn off device and while holding power up + power down, plug into PC. It will show the pre-download mode screen where it asks if you want to continue. Just follow the on screen instructions to unlock bootloader!
*note that the bootloader unlocking results in an unavoidable factory reset**
evan5935 said:
Hey man! Still got your tab 7? I also have a SM-T227U and have oem unlocked! After doing the usual stuff, you will want to turn off automatically update in developer settings. After that, go to settings>General management>Date and time and select manual time and date, and set it for exactly 10 days before the day you attempt this. OEM unlock will appear in dev settings!!!
Then turn off device and while holding power up + power down, plug into PC. It will show the pre-download mode screen where it asks if you want to continue. Just follow the on screen instructions to unlock bootloader!
*note that the bootloader unlocking results in an unavoidable factory reset**
Click to expand...
Click to collapse
Sweet! I will absolutely try this when I get home this afternoon, will report back with results!
But just for clarity. Let's say I start with a freshly wiped tablet. Go through set up and connect to wifi, do I need to add a Google and Samsung account? Then in dev settings, enable USB debugging, also enable wifi debugging? Then change the date. Is there any step I am missing?
coocooguy246 said:
Hello! So I am on a journey to attempt to root a Samsung tab a7 lite sm-t227u. So I want to be extremely transparent as to my reason for rooting:
I was given this tablet by my father whom got it from a previous job. When he left the job they never asked for it back, a long with a good bit of supplies he had that he got to keep.
So, I have this tablet, I can get into it as it doesn't have a passcode. I have wiped it by factory reset as well. However, it has IBM's MAAS360 installed and after factory reset AND a firmware flash using odin I still cannot get rid of this maas360 mdm. It is not Knox locked. I can activate developer mode and change all those settings, but I cannot download any apps through the app store at all or enable unknown source app install as those are under an IT block. I also do not have the OEM unlock option in dev options. I've tried the whole changing the date and connecting to wifi, with and without sim card but I cannot get this option to show, nor can I unlock the bootload through fastboot.
I have read that most of the new samsung phones do not have a bootloader unlock option, but from what I can tell that is specific to the snapdragon phones, and this tablet is running a mediatek chip.
Now, if I can remove mdm restrictions without rooting that's great, but I have a feeling that is the only way to properly flash this thing to completely remove the mdm.
I have tried the recovery tar that is posted in this forum but I cannot get it to flash, likely because I still don't have an unlocked bootloader
Have any of you all faced something similar or know of a solution? I may call the company the mdm is managed by and just see if they will remove it from their system, but I find it highly unlikely.
Click to expand...
Click to collapse
If it has Mediatek chipset then you can use SP flash tool to format the tablet firmware and reflash it.
I would strongly recommend you to backup the NV DATA and NVRAM files before you format the tablet.
coocooguy246 said:
Sweet! I will absolutely try this when I get home this afternoon, will report back with results!
But just for clarity. Let's say I start with a freshly wiped tablet. Go through set up and connect to wifi, do I need to add a Google and Samsung account? Then in dev settings, enable USB debugging, also enable wifi debugging? Then change the date. Is there any step I am missing?
Click to expand...
Click to collapse
You can follow this guide actually! ( https://forum.xda-developers.com/t/...220-t225-install-lsposed-magisk-mods.4406933/) it recommends just skipping the setup junk
I have found that many times, rooting methods work across different models of the same device unless there are some sort of major differences in chipsets or some sort of random change lol
The only thing that doesn't seem to work for our model is section V of the guide which is for the removal of the "bootloader is unlocked" screen at startup. so you will still need to press the power button on that screen to boot up. It's a tiny hassle, but otherwise no big deal in my personal opinion
Make sure to read all the way to the end of the root section (section 4) and especially remember step 7. I retried probably 4 times and even patched the entire AP file of the firmware for use in odin (doing this gives a second warning on Knox screen that it isn't samsung official fw then boots normally into the bootlogo screen) before realizing everything was going fine.. I recommend just using the patched Magisk boot.img first just because I find it unsightly
Just flash the boot.tar in the AP slot. Don't download any of the boot imgs from the guide because they are for the t220's and t225's. I'll link the one I made according to the guide below. It'll save you some time and you won't need to install zarchiver and Magick just to have it factory reset again lol. Just download the latest Magisk apk (26.1) from the official github (https://github.com/topjohnwu/Magisk/releases) and install it when you have completed the 2nd factory reset/the patched boot img install.