I would love to figure out how we can find the file prog_emmc_firehose for our device cause if we do we will be able to unbrick the qualcomm 9008 mode.
MudaTrucka said:
I would love to figure out how we can find the file prog_emmc_firehose for our device cause if we do we will be able to unbrick the qualcomm 9008 mode.
Click to expand...
Click to collapse
i have the lg h960a and i flash a kdz model h960 and my v10 is in qualcoom 9008, this problem is the too or diferent?
Related
Hello everyone,
i read this thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 and try to unbrick my hardbricked D855. I recently installed Marshmallow 30c and then it bricked. As described in the guide i need the TOT File belonging to the used firmware. Is it possible to use the 30b files? Any other suggestion?
Best regards
Hi
Did you managed to unbrick your lg g3 ?
I am having the same problem
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 mode,
kindly help me if you can
I've sended to LG under warranty. I'm excited if they repair it.
If you have no warranty then follow the following, it's very good. Google for "open-freax.fr lg g3" and follow the guide.
well i figured out myself how to get my optimus zone 2 from qhsusb_bulk to QDLoader 9008 by shorten board but computer does not see phone in download mode.. EFS professional see phone in Online Mode but QFIl see's phone in download mode as well as BoardDiag sees it in download mode. Am i missing a step can some one please help.
tgjr559 said:
well i figured out myself how to get my optimus zone 2 from qhsusb_bulk to QDLoader 9008 by shorten board but computer does not see phone in download mode.. EFS professional see phone in Online Mode but QFIl see's phone in download mode as well as BoardDiag sees it in download mode. Am i missing a step can some one please help.
Click to expand...
Click to collapse
No flash programmer. I ended up unlocked the bootloader with my custom image (its already posted you'll see it) and tinkered around but zeroed out sbl1 in hopes of qcom 9006 mode but thay wasn't the case
tgjr559 said:
well i figured out myself how to get my optimus zone 2 from qhsusb_bulk to QDLoader 9008 by shorten board but computer does not see phone in download mode.. EFS professional see phone in Online Mode but QFIl see's phone in download mode as well as BoardDiag sees it in download mode. Am i missing a step can some one please help.
Click to expand...
Click to collapse
I may have found a flash programmer that may work. I've yet to try it (I have an EDL cable) so I just need a week or so till next Saturday till I have my computer back. If it does work I'll already have the EDL firmware made
Looks like the Zone 2 has a flash programmer (MSM8610) prog_emmc_firehose_8x10.mbn (also for other chipsets of this kind) that will be able to be sent to the device. I will tune back in this weekend with results and if success a new EDL restore thread for the Zone 2 will be made
Guys, so I updated my phone from H90120c to H90120L using LG Bridge. Now its hardbricked and when connecting to Windows, Windows says the device malfunctioned. The phone is not turning on at all. I cannot return it as I don't live in a T-Mobile country. I have to try to fix it myself.
Is there any solution?
Thank you!
Unbrick ME!. Feel free to ask questions in that thread, but it is very straight forward. Unless the phone us physically damaged, you can't brick an LG phone (hell probably not ANY Qualcomm based phone -- but LG for sure).
Same here. Phone dont enter download Mode. Pc recognize it as qualcomm hsusb 9008. Healp please. My mail [email protected]
ferchu91 said:
Same here. Phone dont enter download Mode. Pc recognize it as qualcomm hsusb 9008. Healp please. My mail [email protected]
Click to expand...
Click to collapse
if your phone motherboard is f600l (must dissemble phone) see here:
https://forum.xda-developers.com/tmobile-lg-v10/general/unbrick-h901-f600l-board-2017-t3635697
No... Its a h901.
ferchu91 said:
No... Its a h901.
Click to expand...
Click to collapse
if its bricked you have no choices . try with h901 kdz files
h901 lg v10 brick after lg bridge update
samy2015 said:
if its bricked you have no choices . try with h901 kdz files
Click to expand...
Click to collapse
i cant enter download mode or recovery. windows detected as qualcomm hsusb 9008 port 8
Hm, are you sure it wont enter download mode? Entering download mode on v10 might be a bit tricky sometimes. I had some bad experience myself last week. I thought my phone is hardbricked and i m done for good with it, but then i managed to get to download mode and fixed all.
ferchu91 said:
i cant enter download mode or recovery. windows detected as qualcomm hsusb 9008 port 8
Click to expand...
Click to collapse
yea try with qfil
ferchu91 said:
Same here. Phone dont enter download Mode. Pc recognize it as qualcomm hsusb 9008. Healp please. My mail [email protected]
Click to expand...
Click to collapse
Go through the debrick thread
It worked for me and many others
Sent from my LG V10 using XDA Labs
My G955U is hard bricked, because i flashed 2 files that failed both. Doesn't turn on, doesn't charge, doesn't go in download mode, but when i plug it in pc with usb i have a port called "Qualcomm HS-USB QDLoader 9008 (COM9)".
I flashed the BL with this "BL_ZERO_FORCE_EDL_G955U.tar" and the AP with this "AP_PCR_G955U_BQL1.tar".
Is there a solution to flashing with something like Qfil?
Sorry my english.
Giosvy said:
My G955U is hard bricked, because i flashed 2 files that failed both. Doesn't turn on, doesn't charge, doesn't go in download mode, but when i plug it in pc with usb i have a port called "Qualcomm HS-USB QDLoader 9008 (COM9)".
I flashed the BL with this "BL_ZERO_FORCE_EDL_G955U.tar" and the AP with this "AP_PCR_G955U_BQL1.tar".
Is there a solution to flashing with something like Qfil?
Sorry my english.
Click to expand...
Click to collapse
You need the edl files and recovery bat for what ever revision bootloader you where on. I don't know if the edl files are the same for + as reg s8. We don't use qfil on s8
TheMadScientist said:
You need the edl files and recovery bat for what ever revision bootloader you where on. I don't know if the edl files are the same for + as reg s8. We don't use qfil on s8
Click to expand...
Click to collapse
is there a step by step guide please. i am also facing the same problem.
kkins95 said:
is there a step by step guide please. i am also facing the same problem.
Click to expand...
Click to collapse
Pretty much any of the root threads that used edl as long as it's the same bootloader revision. Those root guides will also repair bootloader in the process.
Device is stuck in EDL mode - screen is black, no response to pressing keys or any combination of keys.
Linux recognizes the device as:
05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
Click to expand...
Click to collapse
Windows recognizes the device (after installing Qualcomm HS-USB QDLoader 9008) as:
Qualcomm HS-USB QDLoader 9008 (COM6)
Click to expand...
Click to collapse
After some searching, I found out I have to reflash firmware with QFIL.
I have downloaded stock firmware: RMX2202export_11_A.17_2021120715030199.ofp.
Next, I have looked around for a step-by-step guide for newbie. For sorry, I hove found nothing helpful.
May I ask some tips how to reflash stock firmware using, QFIL tool and OFP stock firmware?
Or, is there another way to unbrick Realme GT [RMX2202] whitch is stuck in EDL mode?
jacek-k said:
Device is stuck in EDL mode - screen is black, no response to pressing keys or any combination of keys.
Linux recognizes the device as:
Windows recognizes the device (after installing Qualcomm HS-USB QDLoader 9008) as:
After some searching, I found out I have to reflash firmware with QFIL.
I have downloaded stock firmware: RMX2202export_11_A.17_2021120715030199.ofp.
Next, I have looked around for a step-by-step guide for newbie. For sorry, I hove found nothing helpful.
May I ask some tips how to reflash stock firmware using, QFIL tool and OFP stock firmware?
Or, is there another way to unbrick Realme GT [RMX2202] whitch is stuck in EDL mode?
Click to expand...
Click to collapse
I believed u have hard bricked ur phone. The only solution I can think of is to find someone to flash the stock rom by using MSM download tool. But they usually charge u for a fee for doing that since u need the id and password to access the tool.