Lots people feedback the volume in cm14.1 may auto-increase to max. (mostly in headphone mode).
This happened when I use my Bluetooth Device to play sound.
My solution is
open the developer opinion , scroll near to center and find disable absolute volume. ,Just disable it.
Done.Hope can help.
Related
Hello,
S3 is my first smartphone ever, so please be patient
Since I'm a student, I put my phone on mute during the classes (through the notification bar).
However, it happened to me twice now that accidental touch on volume up hard key took me out of mute. This is of course undesirable... Is there a way to disable this function of volume-up key?
I want to remain muted until I cancel it on notification bar.
Thanks!
bump... can anyone help?
Sad....it remains a big drawback of the android phones that we cant make different profiles for volume like Nokia phones......
I think you can only do this by finding a tone with no sound and setting it for all the alerts manally from sound setting before entering your class room
anyhow this is a good question and hope some devs can desable vol- button for enabling full vol. back
Thanks...
but modifying it manually at the beginning of each class, then again at the end, is not very comfortable.
Perhaps it can be fixed with a mod? something like that:
- clicking volume up if phone is not muted increases the volume, as usual.
- clicking volume up if phone is muted doesn't do anything.
Hi,
I am facing an annoying issue with Volume control at Resurrection Remix 3.1.0. (maybe at all AOKP builds). The volume slider does only take somewhere 7 steps (the half of the slider) to reach max volume. Slider will walk forward, but volume will not raise anymore. the volume reached by this half way is loud enough, the problem is, that lowest Volume ist still to loud and the granularity at all is very poor, does not find adequate volume level while listen musik, always need to play around 2 levels. Read somewhere that this could maybe fixed while changing framework to add more steps, but have no clue how to do.
I am the only one noticed this annoying issue?
Any ideas how to solve?
Thx!
I'm facing with the same problem too in CyanogenMod, but it seems to fix itself when I'm listening to music through Poweramp.
Hi,
thanks that fixed the music issue. Think poweramp will replace the for long time used mixzing player, if I am not able to find a usable player for free.
Volume issue still remains with Video player BSPlayer. any alternative for this?
I would really apreciate to find a solution to change the granularity in the settings or patch it myself to be able to choose what ever player I wnt to..
Thanks and regards
Fix low earpiece volume during calls the easy way. Been looking for a fix and there was nothing, then I started flashing all sorts of sound mods and although they did improve the speakers for sound and music and speakerphone, the sound ftom the earpiece was still too low sometimes even in quiet room (during calls with people with bad microphones).
Finally a there was an easy fix, download an app from the play store called "Volume Controll". It will present you with more elaborate volume controls than the default built in sonys controls. Here just bump your in call volume to 80% and voila, you'll get louder in call earpiece volume without flashing media profiles xml or similar hack. You can also controll the loudnes while in call with volume keys.
Posted just because I found nothing about this and this is an essential smartphone function, almost exchanged my phone for an LG G3 cause of this single issue.
Would you mind posting the Play Store link?
Jackos said:
Would you mind posting the Play Store link?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=netroken.android.persistfree
Here it is, I believe other similar apps can do this. When prompted to upgrade after trial is over just tap outside the dialog box and continur using as normal. I turned off all notifications to hide profile switcher.
I find I can't lower the notification volume and ringtone volume low enough.
Does anyone know how to change the volume steps? I have sound assistant but it only works for media volume...
I'm rooted if it helps and I've tried the AOSP based rom solution of changing the build prop but with no success.
Thanks for any help!
Have you tried "sound assistant" app. It is from Samsung and has function you are looking for.
Chaudhry69 said:
Have you tried "sound assistant" app. It is from Samsung and has function you are looking for.
Click to expand...
Click to collapse
If you check the original post you'll have your answer lol
EmRav said:
If you check the original post you'll have your answer lol
Click to expand...
Click to collapse
Ah my bad, don't know how I missed it. It is possible in two ways:
01- Get a custom kernel with volume modification support. I use a Galaxy S7edge with Surround sound, this makes the sound loud and more immersed but it has a drawback. The low threshold of volume is too high same as yours. I usually have a problem with the in-call earpiece audio which is too loud for me. I use MoroKernel and luckily a recent update brought the feature of MoroSound providing fine control over gains of 2-microphones, earpiece, and main speaker. You can also look for a kernel with such features for your device.
02- Manually modifying the sound configuration files. That is a bit difficult but good research with a bit of experimenting will eventually get you there.
Chaudhry69 said:
Ah my bad, don't know how I missed it. It is possible in two ways:
01- Get a custom kernel with volume modification support. I use a Galaxy S7edge with Surround sound, this makes the sound loud and more immersed but it has a drawback. The low threshold of volume is too high same as yours. I usually have a problem with the in-call earpiece audio which is too loud for me. I use MoroKernel and luckily a recent update brought the feature of MoroSound providing fine control over gains of 2-microphones, earpiece, and main speaker. You can also look for a kernel with such features for your device.
02- Manually modifying the sound configuration files. That is a bit difficult but good research with a bit of experimenting will eventually get you there.
Click to expand...
Click to collapse
Any chance you know how to mod the sound config files on an S21? Unfortunately there are no custom kernels yet for the Exynos version
EmRav said:
Any chance you know how to mod the sound config files on an S21? Unfortunately there are no custom kernels yet for the Exynos version
Click to expand...
Click to collapse
Yes, go to /etc/mixer-gains.xml and edit it. Drawback is your device entire volume range will be affected like for media and stuff. One more way and probably the more practical one just hit me.
Find your ringtone and notification tone from /system/media/audio/ or download them from google and use a software like Audacity or Adobe Audition to reduce their volume.
You reduce your phone's volume to the lowest and match pc's volume with it. Then reduce the audio gain in the software until you feel comfortable with it. Export it and use it.
For anyone interested. My solution ended up being the following, with my end goal being too optimize my audio with Dolby and have the volume still be lower (but optimized) on the phone speaker.
I tried a ton of different apps, a few magisk volume steps modules, ViperFX with Dolby and finally I found a good solution.
Turn off the default Dolby stuff on the phone.
Install Dolby Atmos ZTE A2019 PRO for magisk (google it and find it on GitHub).
Reboot.
Install JamesDSP from ZackPTG5's website.
Reboot.
Install Audio Modification library to use Dolby and JamesDSP at the same time.
Reboot.
Create a custom equalizer in Dolby and try max things out as much as possible with it still sounding great.
Open JamesDSP, go to Speaker, set limiter threshold to -5, go to post gain and set it to -10. Turn on the master switch. Leave everything else unless you want to change any Bluetooth or headphone settings. Hide the persistent JamesDSP notification.
Reboot.
Install Audio Compatibility module with all the recommended settings.
Reboot.
Result, Dolby Atmos handles all the audio, increases the volume, applies optimizations system wide. However because volume steps are tricky to change on this phone we are stuck with the phone speaker volume being too loud even on the lowest setting. JamesDSP lowers the volume to the built-in speakers but we still get the Atmos experience we want. Everything else I assume you want to be louder anyway, like Bluetooth and headphones.
Audio Modification Library makes James and Dolby work together.
Audio Compatibility Patch fixes some issues with certain apps not using the sound mods.
Success! You get Dolby Atmos everywhere, but it doesn't max out the phone speaker volume, but it will still max out everything else. Oh and you can also change whatever other settings you want in JamesDSP.
The Samsung Galaxy S21 got rid of the phone jack from previous models and now has only a USB-C connection. I bought a USB-C-to-phonejack converter so I could use the headphones I had from my S7 phone. It works when I am using the headphones to listen to music or watch videos. By "works" I mean not only do I hear sound through them, but I can control the volume either using the phones controls or the built-in controls on the headphones. EXCEPT! Except when on a phone call. When I use the headphones when using the phone, the volume control does nothing. Neither the controls on the phone itself, or the controls on the headphones. I end up deafened because the volume is at max and can't be turned down. Again, this is only while speaking on the phone; other apps let me use the volume controls.
Any ideas on ways to fix this?
Thank you,
S.
the_phantom095 said:
The Samsung Galaxy S21 got rid of the phone jack from previous models and now has only a USB-C connection. I bought a USB-C-to-phonejack converter so I could use the headphones I had from my S7 phone. It works when I am using the headphones to listen to music or watch videos. By "works" I mean not only do I hear sound through them, but I can control the volume either using the phones controls or the built-in controls on the headphones. EXCEPT! Except when on a phone call. When I use the headphones when using the phone, the volume control does nothing. Neither the controls on the phone itself, or the controls on the headphones. I end up deafened because the volume is at max and can't be turned down. Again, this is only while speaking on the phone; other apps let me use the volume controls.
Any ideas on ways to fix this?
Thank you,
S.
Click to expand...
Click to collapse
I can't guarantee that this will work. But often what seems obvious to me is something other people miss completely. (And the other way around too.)
When you press the volume down or up rocker on the phone, have you noticed the three horizontal dots at the top of the onscreen volume indicator? If you tap on that 3-dot menu, multiple vertical volume indicators appear. I haven't tested with a USB-C audio jack dongle but I am betting that if you have the dongle plugged in (regardless of whether the earphones are plugged into the dongle), one of those vertical volume sliders will be specifically for the dongle/USB-C output.
Give this a try and let us know if this works. If it does, I realize this might be annoying to do every time. But maybe then you can find a utility in the Play store that allows you to set individual volume levels.
Good luck.
P.S. I fully understand if you prefer the wired earphones. But I can tell you that when I use bluetooth earphones of various kinds, simply pressing the volume rocker does reduce/increase phone call volume.
goattee said:
I can't guarantee that this will work. But often what seems obvious to me is something other people miss completely. (And the other way around too.)
When you press the volume down or up rocker on the phone, have you noticed the three horizontal dots at the top of the onscreen volume indicator? If you tap on that 3-dot menu, multiple vertical volume indicators appear. I haven't tested with a USB-C audio jack dongle but I am betting that if you have the dongle plugged in (regardless of whether the earphones are plugged into the dongle), one of those vertical volume sliders will be specifically for the dongle/USB-C output.
Give this a try and let us know if this works. If it does, I realize this might be annoying to do every time. But maybe then you can find a utility in the Play store that allows you to set individual volume levels.
Good luck.
P.S. I fully understand if you prefer the wired earphones. But I can tell you that when I use bluetooth earphones of various kinds, simply pressing the volume rocker does reduce/increase phone call volume.
Click to expand...
Click to collapse
Thank you. I never really noticed those dots in the volume control; just ignored them all this time! I pressed them and see the extra options. I haven't tried the USB-C dongle yet... I just packed it away for a trip this week. I'll keep it in mind though and try it as soon as I unpack.
Learning something new every day,
S.