Ok, so before the general populace of the forum, looks over this post thinking it's some noob who cant read through the forums to solve there own problem, i would like to say thanks in advance to anyone who can seriously provide some help.
Problem is as follows:::
1,)Phone is working fine using mini-winmo+cyan droid
2,) -PROBLEM- My android stops working, so now im stuck using a lite version of winmo
3,) Tried formatting the sdcard with the lite version winmo built in sdcard formatter, doesnt solve anything, dont exactly know what i was trying to solve with this step.
4,) I decide to get a nice fancy version of winmo, figured it would be as easy as just flashing it once n done.
5,)Decided on going with Ozrom, looked the best at the time.
6,) Run the ruucustom as admin, everything goes fine.
7,) -PROBLEM- after flashing the first boot leaves me stuck on the bootscreen.
So after all that i took the advice and tried to get back to the stock Tmous ROM, but as im typing this im still stuck on the Stick together screen, and also just for a control group i downloaded the latest HD2 cell winmo rom release, and that left me hanging on there version of the boot screen.
Same problem, different roms.. stuck on the loading/boot screen.
But, with the stock rom after playing around with removing the battery, simcard,sdcard and what have you i got the stock rom to boot!!!! I was so excited, i skipped the "How to use the on screen keyboard" tut and was typing in my email info when the phone reset on its own and all my hopes went down the drain... hopefully i will get some help on the issue, and like i said previously in the first paragraph i appreciate any and all help.
thanks.
---UPDATE---
Phone is on and working, intermittently.
When i plug the phone into the charger and wait for the amber light, it will boot up and actually enter into windows, now heres the kicker, removing the charger and using the phone will result in the phone turning off and restarting itself, hanging on the stick together screen.
Removing the battery, and replacing the battery after i push all the buttons, the same way you would power cycle a TV remote, and then connecting it to a charger is the only way ive been able to maintain the operation of the device.
Any ideas?
Try doing task29 reinstall winmo Rom of choosing.. see if that helps.. also I flash everything from bootloader. Also check battery pins make sure they aren't bent..
Sent from my Mytouch HD2
Before I start, I actually have the Huawei Ascend D1 Quad XL.... I am posting here because I simply cannot find a forum for this phone. I have read people who have this similar issue though... So I was hoping for ANY advice.
So to put things straight, the phone was running Stock 4.0 just fine, and I went ahead trying to root it. It was going well but I accidentally hit something in the recovery which I couldn't read the language of (The method I was following was this http://forum.xda-developers.com/showthread.php?t=2037582 )
Now, the phone seems bricked... It is stuck on the Huawei Ascend boot screen (no animation) it has been stuck here for a few hours. Holding the power button down turns it off, but the phone powers itself back on immediately after, and attempting to go into recovery simply does not work. I also am unable to remove the battery until I find a new screwdriver... I am currently waiting for the phone to die in hopes it can boot to recovery... but does anyone have any tips? Thanks.
Pls help me too
LGIQEXPO said:
Before I start, I actually have the Huawei Ascend D1 Quad XL.... I am posting here because I simply cannot find a forum for this phone. I have read people who have this similar issue though... So I was hoping for ANY advice.
So to put things straight, the phone was running Stock 4.0 just fine, and I went ahead trying to root it. It was going well but I accidentally hit something in the recovery which I couldn't read the language of (The method I was following was this http://forum.xda-developers.com/showthread.php?t=2037582 )
Now, the phone seems bricked... It is stuck on the Huawei Ascend boot screen (no animation) it has been stuck here for a few hours. Holding the power button down turns it off, but the phone powers itself back on immediately after, and attempting to go into recovery simply does not work. I also am unable to remove the battery until I find a new screwdriver... I am currently waiting for the phone to die in hopes it can boot to recovery... but does anyone have any tips? Thanks.
Click to expand...
Click to collapse
hi also have this problem can anyone help us, thanks guys
Well, I have a d2pad SN 201301 on the back so its somewhat new
It uses rk2829 rockchip.
Anyways Ive been trying to get recovery on it for the past couple hours to use a new rom, finally got recovery working, did everything installed my rom, and let it restart.
Well, The rom isnt compatible, there was a later version a few pages into the thread that might have been, but the one I got wasnt.
So now I'm stuck, at the intro d2 logo
I only have 1 button and it is power.
Ive tried to get adb working, because it at least says its connected, but with no success anyone have any ideas?
wzzupp548 said:
Well, I have a d2pad SN 201301 on the back so its somewhat new
It uses rk2829 rockchip.
Anyways Ive been trying to get recovery on it for the past couple hours to use a new rom, finally got recovery working, did everything installed my rom, and let it restart.
Well, The rom isnt compatible, there was a later version a few pages into the thread that might have been, but the one I got wasnt.
So now I'm stuck, at the intro d2 logo
I only have 1 button and it is power.
Ive tried to get adb working, because it at least says its connected, but with no success anyone have any ideas?
Click to expand...
Click to collapse
Hey, I realize that it's been a couple years since you posted this question. I never saw any responses. So how did it all end?
Also, there was one critical piece of information you failed to share with the XDA community...you said you worked on getting into recovery with a device that only had a power button and no volume buttons. May I ask how on earth you managed to get into recovery using only a power button? Reason I ask is that I am now facing this situation. NTech Alexis RX3HD8 tablet, rockchip RK2928 processor, power button and no volume buttons! I need to get into recovery but I cannot turn on USB debugging (and the tablet is pattern locked but the pattern was entered too many times....so I am locked out).
At this point, if I cannot enter recovery mode, the tablet is a permanently soft-bricked which is, for all intents and purposes, the same as a hard-brick.
I think what happened for me was, wanted to install new rom, got into recovery to install it, then it bricked my tab, after that I was at the logo
in my case i fixed everything by getting a rkflasher, to reinstall it, and contacting support for the factory image, which is lucky they new something about it, some companies abandon support, or dont know enoguh about what they sell, lol
as for your situation
these are the things i'd try
1. If it has google play, and is connected wifi even if its locked you can try this page
https://www.google.com/android/devicemanager
and then pick ur device and factory reset it is an option (although ive never tried it)
2. search around on the internet for 1 button recovery methods, I've seen quite a few weird tablets, and some I can think of with 1 button recovery
A. a pin hole thats not the reset button or the mic, was an actual button, and that was used to get into recovery with a safety pin, and doing the normal holding it while powering on method
B.. holding the power button, and instead of letting go when u see a logo, keep holding it, till it shuts off again, then power it on
C. plug it in to pc via usb, and turn it on, while its booting, see if ur pc recognizes it at any point during the startup and try to run some commands, ive had a brand of tabs, that give u adb access during boot, but then remove it after finished booting
4. their website is in spanish, and they dont have firmware/manual links available for your tablet
You could contact support for recovery instructions or reflash instructions,, and hope they speak english or you speak Spanish
Most of the time with 1 button tablets, if theirs no info of similar ones online, unless you can contact support, you might be out of luck
PS, my edit:
also, I saw ur post on the youtube video while looking up stuff about this tablet, if that guy can get you a firmware, you have another option of trying to get to download mode too
my tablet, with rk2928 uses these instructions to get it to show up in the RKBatchTool.
https://www.d2pad.info/docs/OSFirmwareInstallInstruction_D2-721.pdf
maybe they can help you get into download mode on urs
all of this being said, I hope my first suggestion will work, IDK if wifi is disabled during pattern lock, or if u can factory reset any tablet, I just know I always see that option when I'm using it to find my devices ect.
CVAngelo said:
Hey, I realize that it's been a couple years since you posted this question. I never saw any responses. So how did it all end?
Also, there was one critical piece of information you failed to share with the XDA community...you said you worked on getting into recovery with a device that only had a power button and no volume buttons. May I ask how on earth you managed to get into recovery using only a power button? Reason I ask is that I am now facing this situation. NTech Alexis RX3HD8 tablet, rockchip RK2928 processor, power button and no volume buttons! I need to get into recovery but I cannot turn on USB debugging (and the tablet is pattern locked but the pattern was entered too many times....so I am locked out).
At this point, if I cannot enter recovery mode, the tablet is a permanently soft-bricked which is, for all intents and purposes, the same as a hard-brick.
Click to expand...
Click to collapse
Without ADB a soft-brick can become permanent state!
wzzupp548 said:
I think what happened for me was, wanted to install new rom, got into recovery to install it, then it bricked my tab, after that I was at the logo
in my case i fixed everything by getting a rkflasher, to reinstall it, and contacting support for the factory image, which is lucky they new something about it, some companies abandon support, or dont know enoguh about what they sell, lol
as for your situation
these are the things i'd try
1. If it has google play, and is connected wifi even if its locked you can try this page
https://www.google.com/android/devicemanager
and then pick ur device and factory reset it is an option (although ive never tried it)
2. search around on the internet for 1 button recovery methods, I've seen quite a few weird tablets, and some I can think of with 1 button recovery
A. a pin hole thats not the reset button or the mic, was an actual button, and that was used to get into recovery with a safety pin, and doing the normal holding it while powering on method
B.. holding the power button, and instead of letting go when u see a logo, keep holding it, till it shuts off again, then power it on
C. plug it in to pc via usb, and turn it on, while its booting, see if ur pc recognizes it at any point during the startup and try to run some commands, ive had a brand of tabs, that give u adb access during boot, but then remove it after finished booting
4. their website is in spanish, and they dont have firmware/manual links available for your tablet
You could contact support for recovery instructions or reflash instructions,, and hope they speak english or you speak Spanish
Most of the time with 1 button tablets, if theirs no info of similar ones online, unless you can contact support, you might be out of luck
PS, my edit:
also, I saw ur post on the youtube video while looking up stuff about this tablet, if that guy can get you a firmware, you have another option of trying to get to download mode too
my tablet, with rk2928 uses these instructions to get it to show up in the RKBatchTool.
https://www.d2pad.info/docs/OSFirmwareInstallInstruction_D2-721.pdf
maybe they can help you get into download mode on urs
all of this being said, I hope my first suggestion will work, IDK if wifi is disabled during pattern lock, or if u can factory reset any tablet, I just know I always see that option when I'm using it to find my devices ect.
Click to expand...
Click to collapse
Hey thanks for getting back to me. You've been extremely helpful and your response may hopefully be found in future by others who have the same problem.
Here's how it's working out for me with this device:
1. It has Google Play but unfortunately the wifi is turned off and there's no way to connect. But in any event, the little kid whose tablet it is (I'm working on the tablet at the request of her father who is my friend), she doesn't remember the Gmail account name or password.
2. I've searched the entire Internet (LOL) including Spanish and Chinese websites/videos but no luck. I can't find anything about putting this badboy into recovery. The reset button is just for show...it only turns the tablet off in case the power button is unresponsive.
3. I've been to the website of "manufacturer". It's a Portuguese company (I speak the language) but they haven't responded to any contact requests. And they appear to offer the firmware for the devices but download link is dead. So I cannot even get the firmware to flash it. The dude on YouTube has not sent me any link to firmware.
But the bigger problem and the key to the issue is that I cannot get the tablet to be recognized by the computer no matter what I've tried. I've tried all kinds of combinations of power button play but I never get that satisfying BEEP that indicates that there is a connection open. You see, I have the drivers for the tablet but there is no way to install them without the tablet giving the opening (even if it would come back as Unknown Device). So, I'm crap out of luck with this soft-brick.
Again, thanks for your help. After 3 days and probably 15 hours spent trying to reset this thing, I'm going to have to throw in the towel. Important lessons learned:
#1. NEVER PURCHASE AN ANDROID DEVICE THAT HAS NO VOLUME KEYS (or without knowing how to get into recovery). You're only asking for trouble if anything should go wrong. And believe me, this is the THIRD TIME I've seen a device that cannot go into recovery. In one case, I was able to flash new firmware directly on bootup off the external SD card (it was an Android laptop with WM8505 chip). I guess one out of three ain't bad odds...but they are not the kind of odds you want with expensive devices.
#2. ALWAYS TURN ON USB DEBUGGING WITH ANY ANDROID DEVICE YOU OWN AND TELL YOUR FRIENDS TO DO THE SAME. One day, it may end up being the savior of the life of that device because it usually means you can access the device via ADB in case of a soft-brick. LOL.
CVAngelo said:
Hey thanks for getting back to me. You've been extremely helpful and your response may hopefully be found in future by others who have the same problem.
Here's how it's working out for me with this device:
1. It has Google Play but unfortunately the wifi is turned off and there's no way to connect. But in any event, the little kid whose tablet it is (I'm working on the tablet at the request of her father who is my friend), she doesn't remember the Gmail account name or password.
2. I've searched the entire Internet (LOL) including Spanish and Chinese websites/videos but no luck. I can't find anything about putting this badboy into recovery. The reset button is just for show...it only turns the tablet off in case the power button is unresponsive.
3. I've been to the website of "manufacturer". It's a Portuguese company (I speak the language) but they haven't responded to any contact requests. And they appear to offer the firmware for the devices but download link is dead. So I cannot even get the firmware to flash it. The dude on YouTube has not sent me any link to firmware.
But the bigger problem and the key to the issue is that I cannot get the tablet to be recognized by the computer no matter what I've tried. I've tried all kinds of combinations of power button play but I never get that satisfying BEEP that indicates that there is a connection open. You see, I have the drivers for the tablet but there is no way to install them without the tablet giving the opening (even if it would come back as Unknown Device). So, I'm crap out of luck with this soft-brick.
Again, thanks for your help. After 3 days and probably 15 hours spent trying to reset this thing, I'm going to have to throw in the towel. Important lessons learned:
#1. NEVER PURCHASE AN ANDROID DEVICE THAT HAS NO VOLUME KEYS (or without knowing how to get into recovery). You're only asking for trouble if anything should go wrong. And believe me, this is the THIRD TIME I've seen a device that cannot go into recovery. In one case, I was able to flash new firmware directly on bootup off the external SD card (it was an Android laptop with WM8505 chip). I guess one out of three ain't bad odds...but they are not the kind of odds you want with expensive devices.
#2. ALWAYS TURN ON USB DEBUGGING WITH ANY ANDROID DEVICE YOU OWN AND TELL YOUR FRIENDS TO DO THE SAME. One day, it may end up being the savior of the life of that device because it usually means you can access the device via ADB in case of a soft-brick. LOL.
Click to expand...
Click to collapse
At last, did we find at last how to enter in recovery mode if there is only one button (power). I am in the same situation with @CVAngelo .Is it possible not to exist recovery mode at all? My tablet is BENEVE R708G with Rockchip RK2928. I tried every combination with power button and reset button but no luck at all.I have boot loop after trying to change the bootanimation.The weird thing is that the new boot animation ''works'' but after that it goes on boot loop forever.
Hi guys, sorry if I posted this at the wrong place.
I have a Lenovo s860 and it went into a bootloop. It was stock and all so I thought that I can have my files recovered if I just bring it to a service center so they can get the files first before wiping it or maybe even fixing the bootloop without wiping the device. Well, the thing is, the guy at the service center screwed up and now, when I try to turn it on, I still see the boot screen (Lenovo, powered by Android) but the next screen is like an television with bad signal.
I'm familiar with rooting and flashing ROMs, I've tried it on my Galaxy S2 (yeah I know, it was way back), but I think things are still more or less the same: I need to be able to boot into recovery mode in order to root the device. However, when I tried the Power Button + Volume Up, or any combinations of the Power Button and the Volume Buttons, it just goes straight to the dead screen, I get no response whatsoever.
I also tried to check if adb can detect it, however, it didn't seem to be able to do so. I'm using a MacBook Pro so I know I don't have to install any drivers, I also code Android Apps so I have a background on this.
I think my only option would be to flash the ROM on this dead device but I don't know how to do that. I've also seen some posts that suggest doing some things (I forgot the specifics) while the battery is drained, so what I'm doing for the mean time is to leave the phone open and let it drain which might take ~2 days.
Does anyone know how to flash a ROM on a bricked device? Thanks for any leads.
Hello, i am new here and i came in here for help.
It all started when i blindly flashed twrp v2.6.0.0 on my tablet, and now i regret that i have done that.
The problem is that it is stuck in a bootloader boot loop and the screen does not work at all when i am at the menu. The os is gone and i can't even go into download mode because the tablet does not have physical volume buttons.
The tablet is an estar mid 7818 mini (rebranded onda v818 mini).
Is there anything i can do? This is my last resort since i am tired of trying to find a solution to this rare problem.
edit:
The os is not gone, as it seems that the thing still has the default battery charging screen while being off, but it don't know anymore. I am no stranger to rooting and flashing, but that was mainly done on Samsung phones, which have much better support than some random chinese tablets.
I still need help, though :^(
Cheers if you read my mess.
edit v2:
I actually fixed it! So this is what i did:
1. found a thread on a different forumsuggesting that i should use iroot to download the drivers (because the device was not recognised by any software);
2. rommaster was installed with me not even knowing;
3. I pressed some buttons and the tablet rebooted to android (the ui was in chinese)'
And with my blind luck - i somehow fixed it.
Hopefully i will not end up in this mess again.
Cheers.