Is it possible to replace mainboard from regular i9300 with neo mainboard? My main concern are lcd and digitizer connector. Thx
Not compatible.
Beamed in by telepathy.
Related
i have a galaxy tab 10.1 that was having screen problems i found out that it was the lcd flex cable if i wiggle it the screen comes on. So its defiantly that cable and not the hardware my problem is i cant find a replacement anywhere just everything else beside the lcd cable i need!
any help will be greatly appreciated.
there's 3 cables i see on the galaxy tab 10.1 the charging port the digitizer and the lcd
lost896 said:
i have a galaxy tab 10.1 that was having screen problems i found out that it was the lcd flex cable if i wiggle it the screen comes on. So its defiantly that cable and not the hardware my problem is i cant find a replacement anywhere just everything else beside the lcd cable i need!
any help will be greatly appreciated.
there's 3 cables i see on the galaxy tab 10.1 the charging port the digitizer and the lcd
Click to expand...
Click to collapse
Same situation here.
Any luck?
It seems like we found a defect right? three people with the same issue between ten days or so ...
two month ago i have replaced the charging port flex, really annoying....
martocapo said:
Same situation here.
Any luck?
It seems like we found a defect right? three people with the same issue between ten days or so ...
Click to expand...
Click to collapse
Could be a defect.
The cable it self instead on being straight is bent 90 degrees to go up and im assuming the crease finally snapped in the cable
Guys,
Check the follwing thread Link .
I am following up the same issue there.
Regards
martocapo said:
Guys,
Check the follwing thread Link .
I am following up the same issue there.
Regards
Click to expand...
Click to collapse
i have the same problem what should i do? replace the lcd flex cable? also mine is overheating too? does that has to be with the flex to ?
Hi everyone I broke the micro usb port on my i9100m, so i went on ebay and bought a replacement but when i replaced it my phone will not power on. When I remove the new usb flex pcb and remove and replace the battery it powers on. What I am wondering is if the markings on the pcb have to match because the original says," SI 1 129 GT=I9100 REV2.2" also a chip with 225A and the new pcb says,"R.B53 GT-I9100 REV2.2" with a chip says 106A. AS far as everything else both parts look the same.
I am wondering if the part I bought is the wrong one, or if the new part is damaged?
If anyone has experience with repairing this the Dock Connector Charging Port Flex Cable on SamSung Galaxy S2 II i9100M, I would love some advice.
BTW this is the link i bought from
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItemVersion&item=180961316856&view=all&tid=926807674008
and I have posted pics of the two parts.
Just looked on ebay and i looked for a new replacement but there are many parts that are supposed to be for i9100but they have different writiing on the pcbs which is weird because they all say they are for I9100.
THANKS IN ADVACE ANY HELP IS APRECIATED
Hi Guys,
I need a motherboard replacement for my t959. Does anyone know where I can get one, or maybe it is better to buy a for parts phone? Is there a website that sells OEM new motherboards? I can't seem to find one online. Thank you!
Also, how do if the motherboard is intact when looking for for parts/repair phones? Screen is broken,cracked? Broken LCD? if the screen doesn't turn on does that mean the motherboard is bad? I just need the motherboard to fix a broken usb port (heard resoldering a new one one is just a temporary fix).
What about if I have a defect galaxy S2 which has a good screen and a galaxy S2 Plus of a year old with a broken screen. Can I put the motherboard of the S2 Plus into the S2?
Nope.. They are completely different
Hello all,
The G850A I have right now currently suffered from water damage and it's going to need a new flex cable, but I can only source parts for the G850F. Would a flex cable for the G850F work with a G850A or is it incompatible?