Related
Hi.
I have already download the new w2k5 to my XDAII and now I can´t wyncronize it via USB with the new ActiveSync 4.0
I have tried via infrared and it works, but when i put my XDA II in the credle, and I try to do it via USB it doesn´t works... Any idea?¿
Thanks
are u sure the File/Connection settings/allow USB connection is checked??!!! :wink:....... otherwise,u cannot synchronise via USB...
RAGO :lol:
Yes, everything it´s ok
I don´t know what could it be... Maybe reinstalling activesync 4.0...
thanks 4 all.
The problem with the USB conection of my xda II and activesync 4.0 still kickin´...
I have read something abaut the same problem in another post? Or it´s just a dream?
Thanks.
It's kinda strange what's happening with u... :?
Now am not sure,but try the following:
*u must have service pack 2 installed(it's a prerequisite)
1-on ur mobile:go to active sync/menu/connections check synchronize all PCs using this connection,and in the window tab below choose USB.
2-try changing the USB port on ur PC.
3-try restarting ur PC,and ur mobile as well...
4-make sure the File/Connection settings/allow USB connection is checked
5-make sure ur cable is functionning well(try another device if u can,or another cradle if possible)
Good luck....
RAGO :lol:
I´m trying to synchronize in a IBM T21 Laptop... Maybe USB 2.0 not soported? Does anybody knows if ActiveSync 4.0 and wm2k5 only works with USB 2.0 ?
Many Thanks
spend some time today to make it work.
first check on device manager if under network adapters exist "windows mobile-based device" and is ok (not with ! sign),
then go to control panel at network and internet connection > network connection.if you have network card there will be one local area connection (or maybe much depend how many network cards have in pc).when conected pocketpc (wm2005) will create another local area conection,connect and disconect to see what number have ex. local area connection 2.right click properties then better tick on show icon on notification area to see what is about connection.go to advanced windows firewall >settings.at general tab turn off,at advanced tab unmark this area connection only,( I want to say to unmark local area connection 2 or what number have this connection between pocketpc and pc) leave marked other local area conection (if is present) to keep protect your pc from outside.press ok in that window,now you are back in properties page check at general tab >tcp/ip protocol > properties to be selected obtain an ip address automatically press ok ok again. now in pocketpc go to start > settings > connections > network cards here select connect to "work" and adapter remote-ndis host select "use server assigned ip address" ok ok again.dissconect and connect pocketpc to pc.look at taskbar right-down corner of monitor,near clock,you should see appear network connection icon.first time at every connection between two little monitor will be a red dot going from one to another,in this time computere search for dhcp server to receive ip address,in short time (4-5-6 seconds) link will be active icon will be clear not fading like previous and the two monitors will blink.if this is not happened check on control panel > Performance and Maintenance > Administrative Tools > services if dhcp client is started,if not start it manual and change startup type to automatic.if until now everything is ok disconnect pocket pc, dezinstall old version of active sync install version 4.0 build 4343 restart pc.after pc started up connect pocketpc to pc,it should work.if still not work dezinstall active sync and from control panel uninstall windows mobile-based device disconect pocketpc restart pc install active sync and connect pocketpc,in this way windows reinstall networ driver and now must work ok.
btw I forgot to tel to check at active sync allow usb connection.
good luck.
Thank you very much for everything gabiz_ro.
Ok, I´m going to tell you what I have realized trying to follow your instructions.
Firstable I don´t have that you call:"windows mobile-based device" Or I didn´t find it... I have looked at Lan or Internet connection.
Then, I have tried to find out the conection that you talk abaut that it must be created when I connect my PPC, but I didn´t find it too. I tried to find it conecting the XDA II via USB and via Infrareds (remember that via IRDA does works)
Finally I changed at my PPC what you say abaut remote ndis host, I saved it, and disconnected and connected again, but it didn´t appear anything at taskbar right-down corner of monitor...
I don´t know what to do... And I´m sure that the problem is hosted the new activesync 5.0 or in wm2k5, cause one hour ago, when I came back to w2003se, I synchronized the ppc correctly with the credle via USB...
I´m feeling very weird with it, cause when I put the PPC in the credle (with wm2k5 and actvesync 4.0) the normal sound of the PC when you connect something reconigzed, don´t sounds... what I hear is the double "tun tun" that sounds when you connect something not recognized.
Many thanks
wm2003 is identified by windows as usb device.
but wm2005 like a network connection.
first
right click on "my computer" > properties > hardware > device manager.expand network adapters,and here when conected pocketpc to usb you'll see "windows mobile-based device"
second
local area conection 2 (or other number,in raport with how many network cards are installed on pc) you''l find in start > control panel > network and internet conection > network connection.but appear only when xda is connected if xda is disconected that "local area connection" dissapear too,and xda must be identified and driver installed (windows mobile-based device show without any ! symbol in control panel).infrared connection will not work here.on that local area network who represent connexion between pc and xda right click > properties and mark show icon on notification area.....
if you hear other sound like you say,maybe xda is not identified or windows didn't install corect driver.take a look to see in control panel what is wrong.expand universal serial bus to see if ther is some unknow device or something wrong.
there is control panel print-screen and taskbar area prinscreen.
Ok!
I think that finally thanks to you we have discovered the problem...
I don´t have everything you talk abaut in the device list...
But what I have is this: Generic RNDIS (PROTOTYPE- Remembber to change id Vendor)
It is with the yellow alert icon.
But what could I do to put it right?
thanks
YEEEEEEEEEEES!
Problem FIXED!
That was the problem... It was not recognized, and with alert yellow icon... Thank you very much gabiz_ro, if you´ll didn´t helped me, now I would be changing back to w2003se
Thank you very much again
ok.
glad to can help.
Problem with sync on WM 5.0
Hi, All. Anyone HELP ME pls.
When I finished upgrade my device to WM2005, my Active Sync (4.0) not working, on USB mode.
Only it's working with Bluethooth.
And I saw on PC Device Manager -> Unknown Windows Mobile Device.(Generic RNDIS (PROTOTYPE--Remember to change idVendor)
How can I fix this Problem? :?:
re-install drivers for this device
Pleun,
Hoe installeer je de drivers opnieuw. Volgens mij heb ik die niet
Groetjes
Frenske :lol:
Yes, everything what you need to do, is to click on update drivers, and everything will be fixed
Best Regards
click Update!!!
Windows cannot find this driver...
But I fixed this problem, whereas after than my device is dead. (not working radio, calendar, bluetooth etc...)
Now WM2005 is not good working on XDA II.
try deleting the device, restart pc and have windows find it again.
prototype
Ive got the same problem, where can I get the drivers to fix this???
Thanks Peter
Drivers
IIve got my MDA PRO for afew days now.
I coudnt sync with active sync 4.
I did a rom update and de beta version of active sync 4.2
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
http://t-mobile.iris-global.com/mdas.html
This PDA is like the world in my hand.
Greetings pocket pc freaks
I have an issue with my VZW Touch Pro not being recognized by MDC and have torn out what little hair I had left trying to solve it. I know there are numerous threads of this type and I've read every one I can find but my situation is a bit different (aren't they all ).
Basically, when I hook up the TP via USB to my Vista machine MDC doesn't come up. If I launch it manually it comes up, sometimes flashes the "Connecting" message very briefly then goes to "Not Connected" and sits. OK. So why am I baffled and what have I done? Well....
1. If I set the TP to connect as a "Disk Drive" (as opposed to ActiveSync) Vista recognizes it and asks me if I want to explore files and folders, I can see the storage card;
2. In PC to USB I've tried both WITH Advanced Device Configuration enabled and not enabled;
3. I've installed Activesync on another (XP) machine to see if the TP will connect to it and get the same behavior;
4. I've removed the Remote Adapter and USB Synch in Device manager (following the standard MS troubleshooting guide) so that Vista installs the USB driver, just to make sure;
5. I INITIALLY installed MDC on this machine when I was trying an HTC Fuze. At that time MDC worked fine, recognizing the Fuze and asking me what I want to sync, etc.;
6. Since that time I've uninstalled and reinstalled MDC (several times) JUST IN CASE, although it shows NO existing partnerships;
7. I've turned off and actually removed the firewall even though, as I said, MDC worked fine before.
8. On the TP I've set ActiveSync (I'm hooking to an Exchange Server) to sync "Manually" and Windows Live to sync "Manually", JUST IN CASE that was the problem.
The only reason I really even NEED MDC is that I want to use eWallet and need to sync between the PC and Touch Pro.
I've used the TP as a modem for my laptop via Modem Link successfully, but while ML is set to USB the service is Stopped. Would THAT have any affect on this: one thing I've noticed is that when I plug the TP in the PC (sometimes) displays a message to the effect that it's trying to connect to a wireless LAN?????
Sorry for the length of this message but I figure the more info the better and this really has me stumped.
Thanks for any ideas.
if this helps yo in any way here it is.
i tryed to hook up my TP via WMDC on a Toshiba Tecra Laptop, with USB or Bluetooth and in the best case i managed to send files via bluetooth ... and the WMDC does not recognize the device, it installs some drivers for the cable (i think) and does not find any for the device, so ... it does the same thing as for you, tryes to connect for a second and after that it goes on a endless brake ... never connecting
on the other hand, i had no problems with a dell inspiron, with wista, it installed the drivers instantly and got connected immediately. the same with a Win XP dektop PC using activesync ...
i`m beggining to believe that the software is sort of defective on the toshiba. now i just send file from it and us the dell to sync my TP. i gave up on connecting the toshiba.
Pretty sure you have already tried this...but different USB cord maybe?
uncheck the box for advanced network functionality in the USB - PC connection settings
MogulUser13 said:
uncheck the box for advanced network functionality in the USB - PC connection settings
Click to expand...
Click to collapse
Thank you!! Solved my problem.
This seems to happen a lot... I just replied to another post in regards to this (though they replaced their Touch Pro). Instead of disabled advanced network functionality (which does let you sync), you should try this to repair the error as it has worked on a friend's Pro, as well as mine (I just had to do it 40 minutes ago). And make sure you re-enable advanced network functionality BEFORE doing this:
1 - Hook up phone to computer
2 - On phone, start ICS (Internet Sharing in Start -> Programs)
3 - Select PC Connection "USB" and Network Connection of any type (if Sprint stock ROM, I recommend using "Sprint")
4 - Hit the "Connect" soft-key (bottom left)
If you've never used Internet Sharing on the phone, your computer should install some drivers... Once that is completed, click the Disconnect left soft-key on the phone. Now disconnect the cable from the computer.
Close out ICS or soft-reset the phone.
Once the phone is back up, plug it in - it should work.
I don't know what is getting reset in the phone, but unless I connect with ICS, then ActiveSync will not connect whether I soft-reset or not.
Is anyone else having trouble with the bluetooth on this phone? Unfortunately I don't have any other devices I can use to troubleshoot with. Windows 7 can't find my Vibrant when searching that direction.
When searching for my PC from the vibrant it shows up on my phone but I am never prompted on my PC even though I have the Alert me box checked. I get one of two results:
1. I'm prompted to confirm a random pin number, but a few seconds after clicking accept I am provided a message saying "Unable to pair with PC. Incorrect PIN or password"
2. Directly to "Unable to pair with PC. Incorrect PIN or password" prompt
I'm using Windows 7 Home upgrade 64bit and this dongle:
ASUS USB-BT21 USB 2.0 Mini Bluetooth Dongle
Any thoughts?
Windows 7 Pairing Issue
I am encountering a situation where my GSII is "seen" by the Win7 laptop on a "new connection", and then lists the device in its device window, but the GSII does not show the pairing on its end, and when I attempt to "connect" from the Win7 PC to the GSII, I get a message "PAN Server"...will not permit connection, and "incorrect PIN" ...or other. Trying to use the new bluetooth sync mechanism for DejaOffice.
Bendezium said:
Is anyone else having trouble with the bluetooth on this phone? Unfortunately I don't have any other devices I can use to troubleshoot with. Windows 7 can't find my Vibrant when searching that direction.
When searching for my PC from the vibrant it shows up on my phone but I am never prompted on my PC even though I have the Alert me box checked. I get one of two results:
1. I'm prompted to confirm a random pin number, but a few seconds after clicking accept I am provided a message saying "Unable to pair with PC. Incorrect PIN or password"
2. Directly to "Unable to pair with PC. Incorrect PIN or password" prompt
I'm using Windows 7 Home upgrade 64bit and this dongle:
ASUS USB-BT21 USB 2.0 Mini Bluetooth Dongle
Any thoughts?
Click to expand...
Click to collapse
Have had some problem when connecting to the pc using USB or Bluetooth. On the phone itself the connection goes fine all the way (i even manage to download 200mb or 400mb files with opera)
On the computer i also have one USB 3g modem witch works fine and that was confirmed by my ISP.
Have tried Toshiba support to see what was their point, and, although they reply very fast (under one day) the messages are not very conclusive. i leave then have to see what you guys think
"thank you for contacting us again.
You need Windows Mobile Device Centre in order to have the drivers installed and make sure Windows Mobile Device Centre displays ‘Connected’ status. As soon as you have checked this, disconnect the device from the PC, select ‘disk drive mode’ as connection type, re-connect the device to the PC and select ‘Internet Sharing’ within Menu. Then tap on ‘Connect’ at the very bottom of the screen.
We trust that this resolves your query, please do not hesitate to contact us again if required.
Best Regards, "
so when i want to have internet on my computer i am slave to MobileDEvice Center is seems.... anyway this method doesnt work for me so the problem remains the same.
Kalas_22 said:
Have had some problem when connecting to the pc using USB or Bluetooth. On the phone itself the connection goes fine all the way (i even manage to download 200mb or 400mb files with opera)
On the computer i also have one USB 3g modem witch works fine and that was confirmed by my ISP.
Have tried Toshiba support to see what was their point, and, although they reply very fast (under one day) the messages are not very conclusive. i leave then have to see what you guys think
"thank you for contacting us again.
You need Windows Mobile Device Centre in order to have the drivers installed and make sure Windows Mobile Device Centre displays ‘Connected’ status. As soon as you have checked this, disconnect the device from the PC, select ‘disk drive mode’ as connection type, re-connect the device to the PC and select ‘Internet Sharing’ within Menu. Then tap on ‘Connect’ at the very bottom of the screen.
We trust that this resolves your query, please do not hesitate to contact us again if required.
Best Regards, "
so when i want to have internet on my computer i am slave to MobileDEvice Center is seems.... anyway this method doesnt work for me so the problem remains the same.
Click to expand...
Click to collapse
No it doesn't mean you are the slave of Mobile Device center.
They want you to connect to Mob Device Center once, and then download the correct drivers needed for your phone. All you have to do is wait till it says 'Connected' which means that your phone has all the necessary drivers.
I am presuming the rest of the steps are straightforward on your device - so next time you connect device, follow the steps above and it should work according to their reply!
OK, i have seen one Unidentified Device when i connect the phone with usb mode . The windows fails to install it but the connection goes ok the same way (until it fails a bit later).
Anyway, another thing i noticed is, the USB 3g Modem i have Hits the 3.2 Mbit whitch is its maximun speed , but the phone fails to even reach its 7.2.... will it be because of the missing driver? (whitch i have no clue how o install) Is this the same procedure for any phone that uses USB (Android , IOS) needs drivers to work properly?
Thank you
Kalas_22 said:
OK, i have seen one Unidentified Device when i connect the phone with usb mode . The windows fails to install it but the connection goes ok the same way (until it fails a bit later).
Anyway, another thing i noticed is, the USB 3g Modem i have Hits the 3.2 Mbit whitch is its maximun speed , but the phone fails to even reach its 7.2.... will it be because of the missing driver? (whitch i have no clue how o install) Is this the same procedure for any phone that uses USB (Android , IOS) needs drivers to work properly?
Thank you
Click to expand...
Click to collapse
Can I ask if you have installed Windows Device Center or Active Sync using a CD that comes with TG01 or not?
I have installed from the Microsoft website, Windows mobile device center.
Have now tried the same on another computer with Windows XP (Active Sync), and the problem is the same as with windows7 (and Ubuntu) where i have already tried.
I am using one Toshiba OFFICIAL Rom, with USB the connections takes a bit more to set up but normally lasts more time connected, with bluetooth, it connects very fast but when it breaks, the PHone crashed completely and the only way to continue is reset..
Want to know if anyone has similar issue
thanks
Have had the following reply after trying to contact toshiba Aggain
"It is normal for the connection to be slower trough the Internet sharing than your normal computer Internet connection. Please note that the phone has different technical specification than your PC has. Also, the Internet connection that you share has different technical specification than the one you get from your home broadband.
We trust that this resolves your query, please do not hesitate to contact us again if required. #
Can someone explain what does this actually mean? The TG01 Cant be used as a 3G Usb Modem ?
thanks
Anybody used or is using the TG01 as a Data modem for the pc?
I want to connect my Android phone to my PC.
They are both on the same network and frequency band. 2.8GHz
I have Shareit on both devices.
On the phone I start Shareit, then tap the tiny icon top right hand side of screen.
I choose Connect to PC, It waits, then says no target found
On the PC I start Shareit. It tells me to do as above.
I then select Search Hotspot of Mobile
When I again ask to Connect to PC, I am told that the current network is AndroidShare_8832 and I am provided with a long random password. So far the phone and PC just sit there saying they are trying to link: the phone has an increasing series of circles (TX?): the PC has a ":radar screen" (searching
If I go to the PC's network app, I can actually see the Andriod_8832 network, and I have logged in using the long random password. That does not seem to do me any good. I disconnect again.
The PC and the phone are still jmust sitting there, expandng and searching.
And there I stand.
Anny help greatly appreciated.
Nick
Which android version is it and is it the original ROM or custom?
Thanks for coming back.
It's Android 11 and the ROM is original.
However, this afternoon I tried again and everything went perfectly! I dunno.......
Nick