{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ACEMAX Latest KIII PRO DVB-S2 DVB-T/T2 Amlogic S912 OCTA Core 64Bit DDR3 RAM 3GB RAM 16G ROM EMMC 2.4G and 5.8G Dual WIFI 802.11 B/G/N AC Gigabit Lan 1000M Enternet Bluetooh 4.0 CCCAM NEWCAMD Biss PowerVU Android Hybrid Set Top Box PVR Timeshift 1080 HD WIFI XBMC Kodi H.265 Android 4K DVB-S2 4K and DVB-T/T2 4K
Hardware
CPU Amlogic S912 OCTA Core 64-bit Cortex A53 Up to 2.0GHz
GPU Penta-core Mali-450 Up to 750MHZ
3D Graphics OpenGL ES 1.1/2.0 and Open VG 1.1 support
Video Decoder 4Kp60 10-bit HEVC, 4Kp30 MPEG / VC-1 / AVS+ / H.264
Video Encoder H.264,[email protected]
Ram DDR3 3GB
Rom eMMC 16GB
WiFi Built in 2.4G and 5.8G Dual WIFI Supporting 802.11 b/g/n AC Bluetooth 4.0 Gigabit Lan
IR Infra Remote Control
LED Indicator Power On: Blue; Standby:Red
DVB-T2 system standard:ETSIEN 302 755
Support MPLP
Demodulation: QPSK,16QAM,64QAM or 256QAM
Forward error correction rate 1/2,2/3,3/4,3/5,5/6
DVB-T2
Guard interval :1/4,19/256,1/8,19/128,1/16,1/32,1/128
Bandwidth: 6/7/8MHz
Input Frequency range:54--860MHz Input Impedance:75 Ω
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector: IEC TYPE, female Loop Output:IEC TYPE, male,
DVB-S2 system standard: ETS 302 307
Symbol Rates: QPSK,8PSK
Forward error correction rate 1/4,1/3,2/5,3/5,2/3,3/4,4/5,5/6,8/9,9/10
Carrier frequency acquisition range: ±5MHz for symbol rates above 3 Msps and ±3MHz for the remaining symbol rates
DVB-S2
Roll-off factors for pulse shaping: 0.2, 0.25 and 0.35
Symbol Rates: 1- 55 Msps
Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector:IEC TYPE, female Loop Output:IEC TYPE, male
I/O
HDMI 2.0
4K 2K HDMI2.0,HDCP2.2
4*USB Host
4 High Speed USB 2.0,Support U DISK and USB HDD
1*TF Card Support 1-32GB
1*AV
AV Output
1*SPDIF
Audio Output
1*RJ45
10/100 BaseT
Power DC Adapter 12V/1A
Accessories
Adapter 12V 1A
Gift Box
IR Remote Control
HDMI Cable
User Manual
Software
OS Android 6.0
Decoder HD MPEG1/2/4,H.265/HEVC,HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6,RealVideo8/9/10
Video AVI/RM/RMVB/TS/VOB/MKV/MOV/ISO/WMV/ASF/FLV/DAT/MPG/MPEG
Music MP3/WMA/AAC/WAV/OGG/DDP/TrueHD/HD/FLAC/APE
Photo HD JPEG/BMP/GIF/PNG/TIFF
Support Language English,German,French, Spanish, Italian, etc. 24 languages
Mouse/Keyboard Support mouse and keyboard via USB. Support 2.4G wireless mouse and keyboard via 2.4G USB dongle
KODI Support local high-definition play, support plug-in installation and play
Others Support DLNA/AirPlay/Google TV Remote/LAN/Miracast/3D moive
Appliactions:
Online Browse all video websites,support Netflix,Hulu,Flicker,Picasa,Youtube,Twitter,Facebo ok,etc
Apps download freely form android market/amazon appstore etc
Medium Local Media playback,support HDD, U disck,SD card
Talk online Support SKYPE video call, facebook,twitter,Netflix,Youtube, etc
Others Support Email,office suit etc
KIII PRO S912 Octa Core Hybrid DVB-S2 T2 3G RAM 16G
ROM (201703)
https://drive.google.com/open?id=0B9pCO2kHOnY6ZldvZTUzdmpnV00
algdu83 said:
KIII PRO S912 Octa Core Hybrid DVB-S2 T2 3G RAM 16G
ROM (201703)
https://drive.google.com/open?id=0B9pCO2kHOnY6ZldvZTUzdmpnV00
Click to expand...
Click to collapse
Thanks friend
hope you explain how to flash this firmware and the recovery image and change log
SaMo_HoSSaM said:
Thanks friend
hope you explain how to flash this firmware and the recovery image and change log
Click to expand...
Click to collapse
it's simple
You put the firmware only the zip in a usb
You put it in the kiii
And you follow the video of the kii, it is the same thing
https://youtu.be/zyx6S6f3g-Y
algdu83 said:
it's simple
You put the firmware only the zip in a usb
You put it in the kiii
And you follow the video of the kii, it is the same thing
https://youtu.be/zyx6S6f3g-Y
Click to expand...
Click to collapse
thanks
i have VideoStrong version not Acemex will it be ok ?
SaMo_HoSSaM said:
thanks
i have VideoStrong version not Acemex will it be ok ?
Click to expand...
Click to collapse
yes is same
algdu83 said:
yes is same
Click to expand...
Click to collapse
do you know whats is new in this version or change log
SaMo_HoSSaM said:
do you know whats is new in this version or change log
Click to expand...
Click to collapse
no sory، i find it in acemax website
I bought this, I'm waiting for the arrival me, someone has tried? how does it work? thank you.
I have question, I have k1plus but if I click home button on remote controller, application is killed by system, and problem is, if I have open youtube, and click home, and I want to go back to the youtube, I need find video from beginning because it looks like system kill every app if user click home button.
Is this feature built also in k3 pro?
@revolution887 please edit this post subject to "Kiii Pro S912 Octa Core Hybrid DVB-S2/T2" without commas to make it the official topic to support and exchange experience about it
thanks
lukiman1605 said:
I have question, I have k1plus but if I click home button on remote controller, application is killed by system, and problem is, if I have open youtube, and click home, and I want to go back to the youtube, I need find video from beginning because it looks like system kill every app if user click home button.
Is this feature built also in k3 pro?
Click to expand...
Click to collapse
yes is same in all box
test other launcher wetek you have "recente app"
https://prodvb.blogspot.fr/2017/02/launcher-alternative.html
you can use different launcher and feature is still enable, after home button previous app is force killed. I tried wetek rom for k1plus and this "feature" was disabled. I'm using leanbacklauncher and I can't play youtube on background, because if I pressed home button, application is killed by OS. :/ I apologize that this "feature" is also in k3 pro, because HW is great.
lukiman1605 said:
you can use different launcher and feature is still enable, after home button previous app is force killed. I tried wetek rom for k1plus and this "feature" was disabled. I'm using leanbacklauncher and I can't play youtube on background, because if I pressed home button, application is killed by OS. :/ I apologize that this "feature" is also in k3 pro, because HW is great.
Click to expand...
Click to collapse
test bouton "app" in remote for go to home with a officiel launcher of k1, kii
SaMo_HoSSaM said:
@revolution887 please edit this post subject to "Kiii Pro S912 Octa Core Hybrid DVB-S2/T2" without commas to make it the official topic to support and exchange experience about it
thanks
Click to expand...
Click to collapse
Already you have
revolution887 said:
Already you have
Click to expand...
Click to collapse
thanks
the cccam works on DTT? I have tried the satellite works but on DTT no! I'm wrong
catorcio said:
the cccam works on DTT? I have tried the satellite works but on DTT no! I'm wrong
Click to expand...
Click to collapse
what is DTT?
SaMo_HoSSaM said:
what is DTT?
Click to expand...
Click to collapse
digital terrestrial.
We can set TWRP to have backup !?
Related
RC Camera
~~~~~~~~~~~
version 2.1 Freeware
© 2009-10, Real Colonel
IP cameras monitoring software for Windows Mobile 6.x.
Download: rccamera21.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Application uses a jpeg-mode of a camera (to reduce the traffic).
The communication with the camera is accomplished by the use of CGI-commands.
The definite commands are set in the camera working profile. Included profiles allow
the communication with TRENDnet, AXIS, Edimax, Ipux, Panasonic, D-Link
and Linksys cameras.
The ability of setting user's profiles, let the application be set for any* IP-cameras,
supporting CGI-commands.
To set the connection to the camera up one should:
1. Fill in the parameters of your camera, choosing the ready
profile or setting a new one ("Menu/Settings" menu point).
2. Check them up ("check" button).
3. Add the new camera to sources list ("add" button).
4. Save the settings ("OK" menu point).
5. Tap on the menu point "Start" in the main window.
The basic operation can be chosen from the context menu (tap-and-hold).
A tap on the image renew it despoticly.
Double tapping on the picture switches the full-screen mode.
The folder for the saved snapshorts is set in the settings menu.
The sliding movement a finger on a screen can be use for operating a
camera's PTZ-control.
To display the program messages correctly in the localized versios of
the Windows Mobile, the resource files System_SR_ENU_wm.cab (for Compact
Framework 2.0) or NETCFv35.Messages.EN.wm.cab (for Compact Framework 3.5)
should be installed.
_
* Not all manufacturers publish information about the CGI-commands, which are used to communicate
with their IP-cameras. Probably for this reason, RC Camera could not be adapted to work with the
following cameras: SPARKLAN CAS-670W, Linksys WVC54G
_
Great App - How to use dyndns?
Thanks for creating the app, I can get it to work with an IP address, but I want to use my dyndns hostname and it wont work with that. I am not sure if is a format issue or if you only support IP addresses. Can you tell me how to use a dyndns address like "smith.dyndns.org"?
jfenton said:
... how to use a dyndns address like "smith.dyndns.org"?
Click to expand...
Click to collapse
Thanx for your interest. and a bug reporting!
As it is just a BETA1, it is not completely tested yet(access by name too).
Please, give me a week to make some corrections.
Dyndns
Thanks for your efforts. I look forward to seeing the update. I have been using it to setup my camera and once connected it seems to be pretty robust.
I downloaded your update and the IP name works great. It did crash when I tried to delete the demo cameras from the list, but came right back when restarted. I deleted them before entering mine and it worked fine. The response time seems to be a little better than the first version. I tried 10 sec, 5 sec, and 1 sec updates. This is a slick application. Congrats on the effort. I hope you have time to continue tinkering.
In testing the beta3, when I go to full screen in landscape it appears there is no way to go back to the application on the screen. I see you have plans for a snapshot function. Again, thanks for you excellent work.
jfenton said:
... go to full screen ... no way to go back...
Click to expand...
Click to collapse
For PDA witch have a touch screen is possible to use: a click on screen - update image, double click - switch full screen mode. I plan to add a hard key supports for swithing full screen. May be it would be better to use a central key of the joystick? What do you think?
I was not patient enough with tapping on the screen to allow it to change modes. (a function of the phone, not the software). Now that I know it works well. Hard buttons may not be a good idea as they are getting rarer on the newer phones. I think that tapping the screen is fine.
Final version is released.
Special thanx jfenton for active assistans.
Oh, by the way, the program functions under Windows Vista too.
I will do some tests with the axis ip cams...and reprot later
Version 1.1 is released.
The support for AXIS network cameras added.
mike2nl said:
... will do some tests with the axis ...
Click to expand...
Click to collapse
It specially for you.
Edimax IC 7000 PTN
There is no program to WM6.5 for the camera Edimax IC 7000 PTN. Maybe something you do. I will be grateful. Regards.
wal24 said:
... for the camera Edimax ...
Click to expand...
Click to collapse
It is easy. But I don't know a public URL for testing Edimax cam.
Can you help me?
Edimax IV 7000 PTN
Edimax IC 7000 PTN
URL: wal24.no-ip.org
port: 80
username: admin
password: 1234
Regards
Version 1.2 is released.
The support for Edimax network cameras added.
that's great, hope you can made it support ipux ics1310 or other ipux ip cam.
herewith demo link, pls try your best to support this cam
Demo Link: http://ipux1310.shooting.com.hk
LogIn ID : demo password : demo
Edimax
At me is not working.
HTC Touch HD
Windows Mobile 6.5
rcolonel said:
Version 1.1 is released.
The support for AXIS network cameras added.
It specially for you.
Click to expand...
Click to collapse
That's great news. So i have now work on my vakation
wal24 said:
At me is not working...
Click to expand...
Click to collapse
What the cam brand, model?
Have an error message?
chanmama said:
...made it support ipux ics1310 or other ipux ip cam.
Click to expand...
Click to collapse
Thanx for your interest.
In order to satisfy all reguirments, i've started working at a new version. In which a user can set the commands of his model of camera himself.
Full Review
Full Unboxing
Black vs. White Design // 10 different 3D games tested!
Camera Test Samples: https://www.mediafire.com/folder/ss1k2xbx994c7/Xiaomi_Mi5_Camera_Samples
Stagefright Vulnerability: No (Tested 04/04 2016 / Build MRA58K / MIUI 7.2.8.0)
AnTuTu Score: 114100
Geekbench 3 battery test: http://browser.primatelabs.com/battery3/250935
Specifications:
- 5.15 Inch 16 LED light screen, 1920*1080 pixels
- 3D-Glass housing
- Qualcomm Snapdragon 820 1.8GHz Quad Core
- GPU Adreno 530 510MHz
- Front fingerprint scanner
- 3000mAh battery, fastcharge 3.0
- Built-in NFC
- 600Mbps 4G+ Download-Speed, VoLTE
- 3GB RAM + 32GB UFS 2.0 ROM
- 16 MP 4-axis OIS maincamera + 2µm-pixel 4 MP frontcamera
- USB Typ C, Bluetooth 4.2, IR Blaster
- MIUI 7 (Based on Android 6.0 OS)
- Supports 2G & 3G & 4G LTE Network
- Network: GSM 850/900/1800/1900MHz, WCDMA 850/900/1900/2100MHz, FDD-LTE B1/B3/B7
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Really nice review.
I got some questions :
1) Is it possible to switch the capacitive buttons? What I mean is reversing the Back and Multitasking Buttons
2) Do you got issue with sync Google stuff (Agenda, Contacts, etc....)
3) Does the camera as good as 2015 Flagship? (Galaxy S6, LG G4)
I will try to get one 128G tomorrow :fingercrossed:
Orochimaru94 said:
Really nice review.
I got some questions :
1) Is it possible to switch the capacitive buttons? What I mean is reversing the Back and Multitasking Buttons
2) Do you got issue with sync Google stuff (Agenda, Contacts, etc....)
3) Does the camera as good as 2015 Flagship? (Galaxy S6, LG G4)
I will try to get one 128G tomorrow :fingercrossed:
Click to expand...
Click to collapse
1) No unfortunately not
2) Yeah I couldn't sync my Google contacts, but I synced them then with my Xiaomi account instead and that works.
3) The camera IS pretty good and fast, I would say on the level with a S6. But people may have different opinions about it.
s7yler said:
1) No unfortunately not
Click to expand...
Click to collapse
Are you sure? There is such option in Redmi Note 3.
Edit
From Arstechnica: "The buttons aren't labeled because you can swap the "back" and "recent" functionality in the software, a compromise between Samsung's "Recent, home, back" order and Google's "back, home, recent" order."
nor-ric said:
Are you sure? There is such option in Redmi Note 3.
Edit
From Arstechnica: "The buttons aren't labeled because you can swap the "back" and "recent" functionality in the software, a compromise between Samsung's "Recent, home, back" order and Google's "back, home, recent" order."
Click to expand...
Click to collapse
I have just checked it again. You can configure the buttons. But in the settings you can not set a "back" function for the left touch button.
From stock it is the recent button, and the settings for that one only allows "show recent apps tray" or "show menu". No back function is possible. So you can not put back on the left side.
The right button (which is stock back) you can not change at all, only for the long press on the back, you can choose "none", "show recent apps tray", "Launch assistant" or "Close current app".
Do you know how to install Google Play?
PetaX8 said:
Do you know how to install Google Play?
Click to expand...
Click to collapse
Try this http://weigu.org/install-google-play-store-on-xiaomi-mi5-miui-7-1/
Btw. I have also now added a video in #1 of the Mi5 in BLACK and 10 games that I test on the device!
Hey, thanks a lot for the review.
I was wondering about how much free space you had when you got the phone.
Is there a lot of bloatware that can be easily removed?
I'm really considering buying this phone but in my country, India, they only sell the 32 gb model.
I'm not sure it'll be enough for me :/
can u show me yours mi5 temperature at cpuz? my emmc temp always at 57'C ,never went down..
can it play HEVC x265 1080p 10bit videos in HW/HW+ Mode with mxplayer?
and does it have artifacts or sttutters?
And.... we're back! After a week-long public holiday here in China, we have a new OTA update 3.0.206 available for you.
If you can't OTA, please download it here: http://bit.ly/2dgIe8L
Please also continue to give us feedback here: http://bit.ly/2asqK8p
_________________________________________________________________
Remix OS for PC release: 3.0.206
Release date: October 11, 2016
Release notes:
- Houdini update resolved issues with apps like Snapchat and Candy Crush
- Fixed most dual GPU issues
- Fixed keyboard input issues when key-mapping is activated
- Fixed conflicts between mouse and keyboard input when key-mapping is activated
- Added Wi-Fi drivers for Realtek wireless cards - rtl8723bs, rtl8723bu, rtl8812au
- Updated Gaming Toolkit to v.1.2.1
- Improved boot menu
- Added touchscreen drivers from Next Window (touchscreen manufacturer)
- Ads have been removed from the 'My apps' section of your app drawer
_________________________________________________________________
Thanks!
Would the touchscreen driver support the surface pro 4 as well?
Hope the touchscreen support for surface pro 4 would be implemented soon!
Nothing related to video playback???? This affects MANY users yet you people of Jide ignore it? I will post logs in your new forum post soon and I hope it gets fixed in the next release....!
Why is it that the OTA is not available to some of us?
@modaifallah
This can actually affect many video playback issues:
- Fixed most dual GPU issues
Click to expand...
Click to collapse
Guys I am using Len think pad t400 it has the Intel wifi link 5100(please tell me if this wifi card is outdated) but runs remix of perfectly fine but I can't access internet it shows connected to wifi but there is no internet please help the help would be really appreciated
Usb tethering working?
Vioner said:
@modaifallah
This can actually affect many video playback issues:
Click to expand...
Click to collapse
I have only one GPU, but yes you're right I will give it a try and report logs if it still fails. Thanks Vioner for ur help
Is there anyway to use SuperSU as a root replacement? Some tools doesn't work with the root that Remix OS have. For example SD Maid + Pro.
Hangs at remix screen on Surface 3. Previous versions boot fine. Tried on Hard drive and USB and both do the same thing.
RemixOS_Jason said:
Remix OS for PC release: 3.0.206 Release date: October 11, 2016
Release notes:
- Fixed conflicts between mouse and keyboard input when key-mapping is activated
- Added Wi-Fi drivers for Realtek wireless cards - rtl8723bs, rtl8723bu, rtl8812au
Thanks!
Click to expand...
Click to collapse
Hi there did you fix issues with ath10k Qualcomm cards.? I have a Asus MB Z170i and remis cannot pick up the wifi on it.
Thanks
We do know there are still outstanding wireless card issues. Can you send us a log report per this post? Thanks!
http://forum.xda-developers.com/remix/remix-os/error-log-reporting-remix-os-pc-log-t3478115
shegeloaf said:
Hi there did you fix issues with ath10k Qualcomm cards.? I have a Asus MB Z170i and remis cannot pick up the wifi on it.
Thanks
Click to expand...
Click to collapse
Can you reinclude the button to sort start menu by usage, that was my default setting.
did they added any new feature to gaming toolkit??
@princehpk you see the changelog, there's nothing more nothing less...
Vioner said:
@princehpk you see the changelog, there's nothing more nothing less...
Click to expand...
Click to collapse
yea ...i really wish they improve the gaming toolkit ......add touch mouse funtion
WiFi has always worked for me. On the new version a found out that Bluetooth (Atheros) is not working. I have an Asus K55VM laptop.
Question:
Is it normal for me to have to click on the WiFi icon on the Taskbar for my laptop to connect to WiFi? When I boot up and open an app or browser i have no Internet. I then click on the WiFi icon and only at that point is when it says "connecting" and then it connects. In other words, it does not connect until I click the icon to see what networks are available; I don't click on any of the networks, as soon as I click on the icon it automatically connects to the one I had saved.
@cubandanger05 No, it's not normal. It should connect automatically right after the boot procedure is complete. This is a known issue and Remix team has it on it's list. Wait for a fix
Which are the improvements?
Still without seeing ''Never'' in Screen Suspension options. Battery taskbar icon still dissapearing after reboot.
BTW i'm understanding a bit better about mmo games issues. Until 3.0.202 when open a game it closes automatically. Now, when open an mmo (e.g. MU Origin) it works only the first 30 seconds after booting, then stops, as you can see here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Something of the system actives after booting that can't let apps to work properly. Maybe some OS new features, maybe a new driver not present in version 2.x.x (i remember could play this game in the past).
You should improve the File Manager. Enable move to first/last folder when pressing home/end keys. Enable move to specific folder when pressing a letter key (you know, press ''R'' to move to the first folder of directory with initial letter ''R''). Enable backspace for back to previous folder.
Gaming Toolkit still not worthy. The only change i seen is that ''CANCEL'' & ''SAVE'' now marks ''Cancel'' & ''Save'' and thats all. D-Pad box can't resize to littler, just bigger. In fact when i try to resize down, the wasd letters gets littler instead the box... is that a joke? cause is not funny. Still without recognizing Generic Gamepads (when pressing a button just marks a blank space, if pressing d-pad buttons, it marks ''reserved''). And what about integrating an Xbox Controller Emulator in the toolkit? I mean, a feature that can register all the existing gamepad buttons and convert them to xbox layout (and maybe other gamepads like Dualshock, MOGA, Dancing Pad, etc.) so, if there's a gamepad-optimized app like Implosion, i can play it with any gamepad, not just an xbox one (i haven't, i won't buy it either since i have a generic and i want to use it). XboxCE is an existing app in windows, try to port to Remix.
As gsmarena stated, this device support native 24 bit/192 khz playback. But when I tried to enable it with poweramp v3 build 704 alpha with AOSPExtended ROM, it keeps failing and reverted to default playback, which is OpenSL.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone confirm 24 bit/192 khz Hi-res audio is supported? If it's not enabled out of the box, how can I enabled it so it's working?
Thanks in advace.
robby_tan said:
As gsmarena stated, this device support native 24 bit/192 khz playback. But when I tried to enable it with poweramp v3 build 704 alpha with AOSPExtended ROM, it keeps failing and reverted to default playback, which is OpenSL.
Can anyone confirm 24 bit/192 khz Hi-res audio is supported? If it's not enabled out of the box, how can I enabled it so it's working?
Thanks in advace.
Click to expand...
Click to collapse
Bro our device does support hi/res audio and we can natively play FLAC files but
A. The audio source should be in encoded in 24 bit/192khz
B. The player should also be powerful enough to play native FLAC files
I'll soon post some samples of audio and some screenshots to prove it. Cheers!!
Eduardo379 said:
Bro our device does support hi/res audio and we can natively play FLAC files but
A. The audio source should be in encoded in 24 bit/192khz
B. The player should also be powerful enough to play native FLAC files
I'll soon post some samples of audio and some screenshots to prove it. Cheers!!
Click to expand...
Click to collapse
Thank you for clearing out and going to prove this thing. I just have no clue when tinkering around. Trying multiple cofigs, tweaking system files like build.prop and audio_policy.conf, amd trying any flac file from 48 ,96 to 192 khz. No result for me.
robby_tan said:
Thank you for clearing out and going to prove this thing. I just have no clue when tinkering around. Trying multiple cofigs, tweaking system files like build.prop and audio_policy.conf, amd trying any flac file from 48 ,96 to 192 khz. No result for me.
Click to expand...
Click to collapse
Alright bro I found some files I'm gonna test em out in Poweramp for everybody in our community and I'll post those files soon for everybody to download, test and feel the power of our device and what it can do
Here ya go
Eduardo379 said:
Here ya go
Click to expand...
Click to collapse
Can you post your screenshots of audio info and audio output settings like I posted above? Thanks.
And you're using LineageOS ROM. How's that ROM? Is it good as daily driver?
works for me
rxlord said:
works for me
Click to expand...
Click to collapse
What ROM are you using? How you manage to get it worked?
robby_tan said:
What ROM are you using? How you manage to get it worked?
Click to expand...
Click to collapse
im using stock miui 8.2.4.0
It's strange that some people get it work but not for me, even when using stock miui global ROM, mine still doesn't work. I don't know why this happens to my phone.
Miui rom mtk with extended USB dac works perfectly
Working with some touches
Incase you're still looking for answers. Yes, I've got mine working. I just tweaked some build.prop settings and there we go.
*Changing line 32 to Samsung and adding persist.audio.uhqa
cerberus2596 said:
Incase you're still looking for answers. Yes, I've got mine working. I just tweaked some build.prop settings and there we go.
*Changing line 32 to Samsung and adding persist.audio.uhqa
Click to expand...
Click to collapse
I'm using LineageOS 14.1, i believe it will work on other roms except android oreo
robby_tan said:
As gsmarena stated, this device support native 24 bit/192 khz playback. But when I tried to enable it with poweramp v3 build 704 alpha with AOSPExtended ROM, it keeps failing and reverted to default playback, which is OpenSL.
Can anyone confirm 24 bit/192 khz Hi-res audio is supported? If it's not enabled out of the box, how can I enabled it so it's working?
Thanks in advace.
Click to expand...
Click to collapse
Yep,it's Perfectly working for me . Try Latest 790+ Preview Beta (New UI) and Hi-Res only works with Audio Jack output.
I can't find hi res audio output in new version,but old version is showing.
cerberus2596 said:
Incase you're still looking for answers. Yes, I've got mine working. I just tweaked some build.prop settings and there we go.
*Changing line 32 to Samsung and adding persist.audio.uhqa
Click to expand...
Click to collapse
Bro your build prop contains some additional tweak lines.
Can you share that( if any thread is there)
Yes bro our Redmi note 4 supports hi res audio
It's all due to Snapdragon 625 SoC has 24bit 192kHz audio support but i think you are facing problem due to linage os because I'm using MIUI 9 and in my phone Poweramp is working perfectly fine with hi res audio output....
Here we come with a pretty interesting TV Box based on relatively new Amlogic S905x2 SoC. '
There are a lot of reviews about this SoC already so we not going to stop on this part.
This device also has 2 GB RAM and 16 GB ROM, which is kind of a standard for middle range devices.
As far as I get, these devices come to market in different variations and not only different amount of ROM and RAM but different type of RAM.
According to resellers devices come with LDDR3 and LDDR4 chipsets, so here is the list:
X2 Cube comes with LDDR4 2GB memory and 16 GB NAND
X2 Play comes with LDDR3 4 GB memory and 32 GB NAND
X2 Pro comes with LDDR4 4 GB memory and 32 GB NAND
For a review, I got the X2 cube model with 2/16 GB pack on board.
Small series of unpacking photos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Form factor of the device is not as standard as I felt at first site. It is neither TV BOX size nor dongle; it is something in the middle.
Device dimensions 110*62*22mm. X2 Cube looks like a bigger version of dongle size device but with a standard combination of interfaces.
Device has standard for dongles size interfaces: USB 3.0 and USB 2.0, HDMI 2.0, AV port and TF card port.
As a normal TV Box X2 Cube has SPDIF optical interface, IR port for remote control detector, and LAN 1 GBit interface port.
Device gets its power from micro USB port (5V 2.5A)
Performing a first start, I saw a standard Amlogic icon and brand start screen with logo.
Start screen after loading shows “Launcher 3” standard launcher with several apps including Google Chrome, Play Market, File manager and Settings.
Bottom side of packing box told us it is Android 9 based system and we see this as soon as we run settings.
After establishing Wi-Fi or wired connection device need to spend some time to update google apps and then you can start, login and install your apps.
Checking the settings, I found special settings tab called X2 settings. Tab looks similar to Ugoos Settings in Ugoos AM6 I have checked and reviewed before.
Looking through the ugoos.com I found out this device was created with the help of Ugoos Company:
they have placed information about X2 Cube in a “projects” section.
X2 Settings sections contains following abilities:
- One click Root feature to provide additional rights for selected apks
- File server or file client server: to share info from storage to internal network
- Playback settings: provides additional settings to make sure different video format playback correctly
- Hardware monitor provides main information about TV Box in upper bar
- Wireless assistant gives ability to use smartphone to control this device
- Gamepad settings can help to customize controls for better game experience
- Debug settings is a tool for developers
- User scripts gives ability to activate prepared scenarios also useful for tests
- System bars function control activities for both upper and down bar
- Input device settings offers several profiles for different remote controllers to use
Updater application also looks like Ugoos updater, which provides OTA services and manual update if you have downloaded OTA Package file.
At first site TV Box have all promising abilities of good TV Box.
If you would like more details about this device let me know I will share more details
That's a really good review, thanks
Is there any possibility you could test the max temperature it reaches under high cpu load?
With the apps cpu load generator and Cpufloat (for checking the temperature in real-time)
Thanks in advance
Enviado do meu POCOPHONE F1 através do Tapatalk
TheBlackening said:
That's a really good review, thanks
Is there any possibility you could test the max temperature it reaches under high cpu load?
With the apps cpu load generator and Cpufloat (for checking the temperature in real-time)
Thanks in advance
Click to expand...
Click to collapse
Hi, I can do this in several days. Will post the info about these tests here.
Such_A_Victor said:
Hi, I can do this in several days. Will post the info about these tests here.
Click to expand...
Click to collapse
Ok, thanks.
Enviado do meu POCOPHONE F1 através do Tapatalk
TheBlackening said:
Ok, thanks.
Enviado do meu POCOPHONE F1 através do Tapatalk
Click to expand...
Click to collapse
I have also checked device with a throttling test, you can see the screenshots below
The device shows pretty good performance and seems overload do not let the system get too hot and cut CPU frequency.
The box has a good cpu temperature even under high load.
Thanks for the help
Enviado do meu POCOPHONE F1 através do Tapatalk