My Mini M8s II just stooped working this morning after two moths of use. I have not done any change on softer side was using is as it was. I found out this morning just a black screen with blue led at front, restarted it and the box was suck at goole TV logo even after second reboot. I have tied to rested device by holding pin at the bottom while inserting power plug. That resulted in black screen again and no more blue led in front. Therefore i decided to attempt flashing factory firmware with USB Burning tool.
Got device to connect with PC but had two failed attempt flashing device at 7%
Any suggestion?
Related
good afternoon,
My xperia mini pro sk17a has a black screen.
Prior to this occurrence, I had a bad flex ribbon cable to the sliding keyboard. Screen would go black and come back with sliding keyboard motion. Opened the phone and found that the cable was torn. Decided to buy a replacement flex cable and installed it. Everything looked okay but...
Once I put the phone back together, no screen at all. If I turn the phone on, there is a very very faint amount of light present (you can only see this in the dark). The phone does boot, and the notification light will flash indicating new messages. I can call the phone and it will ring.
Hoping that this might be some sort of software reset, I tried flashing with the SUS software. No help, phone still behaves as described above. I'm guessing I need a new screen (maybe damaged it somehow taking the phone apart?), but has anyone gone through this and know of a solution other than more new hardware?
Thank you in advance for any help or feedback.
I think new flex cable is also damaged. You should check flex cable in another SK17.
Hello,
Recently my phone dropped and half of my touch screen stopped working. I have disassembled my phone just to try if the old lcd will work when I plug the connector out and in again. I discovered that no so I have ordered the new LCD. During the reparation I accidentally broke coaxial cable between the antenna and motherboard so I ordered the new one. Now phone worked, but there was no phone signal but display and everything else worked just fine. I have disassembled the phone again when the new coaxial cable arrived but I have discovered, that I have bought bad one because it did not work. So I left the phone disassembled and wait for another one.
After I assembled the phone with the second coaxial cable my phone does not show nothing on the screen, even on the old LCD. When I connect phone to the pc I got instantly to the fastboot and I can get out of it. After fastboot reboot I get again to the fastboot.
Sometimes the LCD powers up but does not show nothing, and when the phone is in the charger the diode is red.
Does anybody have any idea how can I fix this problem?
I have tried to boot the phone without camera, speaker, antena, but nothing worked.
First off I have a "IRULU X1047" and a "RCA Voyager" I rooted then with KingORoot after a few days they died. The IRULU was my replacement for the RCA and but this is the odd thing both of them when i connect them to the computer i can her the windows USB plugin sound and thin in about 30 sec I hear the USB disconnect sound and then in about 2 sec it makes the USB plugin sound and it keeps doing this. BUT the RCA If I hold the reset button with a paper clip will show the Charging pic for about 2-5 min then it will go black and not come back on.
I have the ADB driver installed and No they do not show up on ADB.
and used Tether but it was a no go.
I also used about 5 different USB cables
And on the RCA I tried opening the tablet and unplugging the battery for the mainbord and it did not help.
No they will not go in to recovery mode.
No screen ever pops up but for the with the batter when I do the rest button for the RCA thats it.
also fore the IRULU if open Device Manager and watch it when its pluged up the the USB and it makes the windows USB plugin sound This item shows up.
---https://i.gyazo.com/2946ac41b3d5cdb42f6235e24cd8ca15.png---
Note the RCA died when i was re-rooting it with KingORoot and when it rebooted it was bricked. The IRULU I was setting up the app LINK2SD
and just had moved some apps and was rebooting it and then i never came back on.
Thanks for all the help. I can fix almost any computer you place in my ands but im just lost with tablets and phones. My hopes are to get the IRULU back and running.
i had my rbox pro 3+32 for 2 weeks which immediately showed power issues randomly cutting out i contacted the seller who gave me a 25% refund if i agreed to keep the box so i thought a sd burning update of the new firmware may fix it but it cut out just as update was starting now it is hard bricked with no tv output and only a light blue light with a reset button not seeming to work (i have since found the power adapter was causing the orig power cutout issues and replaced it), i have tried to do sd burn but nothing happens, i have tried usb burn but does not connect i tried shorting pins next to the bga emmc where an older style nand chip could have been optioned , i cant even get it to connect via uart ttl
i have tried to find another solution but im all out of luck any help would be appreciated
my only other idea is to remove emmc chip and install a sd card socket in its place but i cant find any info on this and im not sure if its even possible
Ok finally all sorted by soldering 2 wires on the old tsop pads (even though it uses a bga emmc) and holding the wires together for 8 seconds from the time i plugged in the power, also it had to be powered via a usb port instead of main plug as the sd didnt seem to get power to it while it was bricked using the main plug ??. anyways after the 8 seconds the screen lit up and i opened the shorted wires and the sd update started, after 10- 12 minutes it completed and all is well
I used the h96pro plus android 7.1 firmware and it seems to be very compatible with no issues that i have noticed so far
Any way you could document your process a little more? Like which pads you used? My r-box died watching youtube, and stops at 7% using usb burning tool, and also stops right away using sdcard method. Would love to revive this device.
smashdotcom said:
Any way you could document your process a little more? Like which pads you used? My r-box died watching youtube, and stops at 7% using usb burning tool, and also stops right away using sdcard method. Would love to revive this device.
Click to expand...
Click to collapse
the same problem 7% dead
Hi, like i said the phone doesnt charge. The problem can not be the cable or the adapter cause i tried different ones and the original provided with the phone.
Ive tried charging through usb cable from my pc but also no success
Here is exactly whats happening:
I plug the usb cable into the phone and I get the red light blinking then the sign with the battery shows up with a bolt over it (sign it charges).. then after a few seconds the screen goes black and then the sign saying "Sony" and Xperia pops up. This loops without pressing any buttons. Im getting really desperate here.
thanks in advance.