Hello.
After updating to 23s, I'm having a annoying problem when connecting the phone (X820) to battery charger.
If I connect it in standby, display lights up to notify that charger has been connected, but after that it doesn't turn off automatically after some seconds, how it should normally do.
The display remains on forever, unless I click the power button.
Anyone has the same problem?
There should be a setting somewhere to let you change the screen on while charging. Try setting -> lock screen or battery. I am not on stock rom cannot help you more.
It's under development settings, remain on when charging or do not turn off display when charging.
For some unknown reason was enabled by the update i guess
Thanks to all for answers.
I'm sorry, but it isn't the problem, that setting was already disabled, I've tried in any case to enable/disable it, but the problem is still present.
Bygepp said:
Thanks to all for answers.
I'm sorry, but it isn't the problem, that setting was already disabled, I've tried in any case to enable/disable it, but the problem is still present.
Click to expand...
Click to collapse
I'm having the exact same problem... I don't know why it's doing that... if you resolved it please tell me how. Thanks.
lidor38 said:
I'm having the exact same problem... I don't know why it's doing that... if you resolved it please tell me how. Thanks.
Click to expand...
Click to collapse
I'm sorry, I still haven't figured out that problem.
Is there any log that I can view to understand what is the problem?
Bygepp said:
I'm sorry, I still haven't figured out that problem.
Is there any log that I can view to understand what is the problem?
Click to expand...
Click to collapse
I just tried another qc3 charger and it was charging fine! the problem was in the cable only...
ended up purchasing type c cable and its charging just fine...
lidor38 said:
I just tried another qc3 charger and it was charging fine! the problem was in the cable only...
ended up purchasing type c cable and its charging just fine...
Click to expand...
Click to collapse
Oh strange!
Unfortunately I don't have another USB-C cable to try it, with the original cable display remains "On" after plugging in the charger, but how the cable can affect that behavior?
Problem still present.
Can I see some log for trying to understand what is the problem?
Nobody can help me? Nobody has this problem?
Tried full wipe and reflash stock ROM many times, tried 26s, tried other EUI based ROMs, tried hard reset via QFIL, tried changing the charger cable, but nothing, the problem persists...
It doesn't happens in LineageOS or other LineageOS based ROMs, so it is surely a software issue, but I can't understand what is the damn problem...
Did you tried indain 19s firmware?
Bygepp said:
Nobody can help me? Nobody has this problem?
Tried full wipe and reflash stock ROM many times, tried 26s, tried other EUI based ROMs, tried hard reset via QFIL, tried changing the charger cable, but nothing, the problem persists...
It doesn't happens in LineageOS or other LineageOS based ROMs, so it is surely a software issue, but I can't understand what is the damn problem...
Click to expand...
Click to collapse
Flash 19s Firmware.
AdityaDharewa said:
Flash 19s Firmware.
Click to expand...
Click to collapse
Do you have the same problem? 19s it's an Indian ROM, I can downgrade to 20s and try, but I'm on Crisbalgreece EUI ROM, that is so good, and I wish I can solve this problem with updated ROM...
Related
Hello.
I have a problem with my S II... Out of nowhere it started crashing. It boots normally, but once it loaded, it crashes immediately. The crash is actually a system freeze, then it shuts down. The battery is fully charged, but the phone was burning while it was charging, not the battery though. So basically I start the phone, it freezes, then it shuts down.
Don't know if it's the battery or the firmware... I have stock firmware.
Thank you in advance.
UPDATE:
The phone is still burning, at the back top, camera area. The battery discharges very quickly now I see.
I remember using the flash before it happened. I used it to a point where it started buzzing and discharged the battery to 5%. I put it immediately to charge, but, now it's like in a vegetable state...
Still don't know if it's the firmware's fault or the battery. I don't want to rewrite the firmware, the battery I could change... But I'm thinking the camera or it's flash is broken, freezing the phone and draining it's power... Is that even possible? What to do?
Thank you.
UPDATE 2:
Ok, I found the problem, the mainboard was faulty and I had to replace it.
But now even though it seems to work even better, it has something else......... The USB port isn't working. The circuit board with the microphone, usb, etc. is the one I had before, didn't change that. So it should work perfectly, but it's not. When I plug the charger, it takes a few good seconds to see the status "charging", and when removed it's the same. When I connect the phone to the PC's USB port, it doesn't recognize the phone. What the hell? I enabled the USB Debugging on the phone and still nothing... The battery is charging though, but very slow. Damn, this phone is torturing me!!
Please someone help me with this other issue... ((
Thank you!
UPDATE 3:
I managed to fix my phone. Changed the mainboard, changed the USB board, installed firmware and it worked.
Thank you all for all your help!
Check the voltage during charging via Battery Doctor. It is due to your battery. Try changing battery
syedbilal093 said:
Check the voltage during charging via Battery Doctor. It is due to your battery. Try changing battery
Click to expand...
Click to collapse
How do I do that? The phone freezes the moment it loads the system. I wrote an update in the original post. Thanks for trying to help.
So, anyone has any idea?
First replace your battery. Try to replace charger. It is your main board maybe thats why your S2 restarts itself. It is critical. If it does not solve your issue ... it is your kernel. Lots of peoples are complaining about kernel bad behaviour ... they are also not rooted. So try to root it if the battery doesnt solve your issue. Also try to have a hardware checkup by a technician ...! Hope it helps
syedbilal093 said:
First replace your battery. Try to replace charger. It is your main board maybe thats why your S2 restarts itself. It is critical. If it does not solve your issue ... it is your kernel. Lots of peoples are complaining about kernel bad behaviour ... they are also not rooted. So try to root it if the battery doesnt solve your issue. Also try to have a hardware checkup by a technician ...! Hope it helps
Click to expand...
Click to collapse
So I consulted a technician and the problem was the mainboard. I had to replace it... Now it works like a charm, or so it seemed at first. Now something else is ****ed up.
I wrote another update in the original post, please read it...
Thank you for all your help.
@lucian there are charging pins and computer connecting pics on the main board which lets your smartphone to communicate with pcand charge. These pins have some prints for reading. So these prints are damaged according to my info.!. Repair those prints and let us know.!
@Lucian Andries I have the same problem of heating at the part of camera .. Dont worry i dont think its because the problem of flash or your camera .. Only because your battery gets heated up and leads to heating up your device . So i had to change my modem to control the heating im using KH3 now which doesnt heat up very often .. but i do have some heating when its over charged !!
@GreenArrow_I9100: What is KH3?
@syedbilal093: Ok, I tried that to, I changed the USB/Microphone board too. That didn't work either. The problem this time was still the mainboard, it had a faulty stock Firmware installed on it. I installed CyanogenMod 11 SNAPSHOT 12, and the problem was solved.
Thanks guys for trying to help.
Lucian Andries said:
@GreenArrow_I9100: What is KH3?
@syedbilal093: Ok, I tried that to, I changed the USB/Microphone board too. That didn't work either. The problem this time was still the mainboard, it had a faulty stock Firmware installed on it. I installed CyanogenMod 11 SNAPSHOT 12, and the problem was solved.
Thanks guys for trying to help.
Click to expand...
Click to collapse
KH3 is the modem type ..
You can download it from here http://forum.xda-developers.com/attachment.php?attachmentid=1066735&d=1337266991
And then flash it from odin but upload file in PHONE/MODEM instead of PDA in odin It did help me with heating problem !!!
For now even im running cm11 m12 snapshot over dorimanx and encountered no problems so far . I get a battery life for around 4-5 hours on screen wifi on .. And no heating problems !
GreenArrow_I9100 said:
KH3 is the modem type ..
You can download it from here http://forum.xda-developers.com/attachment.php?attachmentid=1066735&d=1337266991
And then flash it from odin but upload file in PHONE/MODEM instead of PDA in odin It did help me with heating problem !!!
For now even im running cm11 m12 snapshot over dorimanx and encountered no problems so far . I get a battery life for around 4-5 hours on screen wifi on .. And no heating problems !
Click to expand...
Click to collapse
I installed that modem too. Didn't check the modem I had before. Hope will help.
On my cm11 m12 I have some problems. Applications just "stop working" out of the sudden. As there is no thread for SNAPSHOT versions, I'm asking you if you have this issue. Is this due to kernel? Should I change the kernel? I have the cm11 kernel...
Thanks!
Lucian Andries said:
I installed that modem too. Didn't check the modem I had before. Hope will help.
On my cm11 m12 I have some problems. Applications just "stop working" out of the sudden. As there is no thread for SNAPSHOT versions, I'm asking you if you have this issue. Is this due to kernel? Should I change the kernel? I have the cm11 kernel...
Thanks!
Click to expand...
Click to collapse
Generally applications stop working if you alter the procedure of flashing the kernel while you flash the rom
I prefer this order
1. Install dorimanx kernel
2. check for kitkat compatible recovery
3. Full wipe data factory reset, cache partition, dalvik cache, Mounts and storage --> Format/system
4. Install Rom cm11 snapshot
5. Install Gapps(Used PA gapps)
6. Reboot !!
Anyway many say that kernel can be flashed between rom and gapps.
But so far i never had any problem of application stopped working !! So try this out !! Hope this solves your problem
Great to hear that @lucian
GreenArrow_I9100 said:
Generally applications stop working if you alter the procedure of flashing the kernel while you flash the rom
I prefer this order
1. Install dorimanx kernel
2. Install kitkat compatible recovery
3. Full wipe data factory reset, cache partition, dalvik cache, Mounts and storage --> Format/system
4. Install Rom cm11 snapshot
5. Install Gapps(Used PA gapps)
6. Reboot !!
Anyway many say that kernel can be flashed between rom and gapps.
But so far i never had any problem of application stopped working !! So try this out !! Hope this solves your problem
Click to expand...
Click to collapse
But is the Dorimanx kernel better than CyanogenMod's kernel?
@Lucian Andries Doesnt really matter the kernel here if you follow the correct order of flashing them .. I hv tested rom over both kernels and it was smooth with no problems So what you choose is upto you but i personally like Dorimanx
Both kernels are good though
GreenArrow_I9100 said:
@Lucian Andries Doesnt really matter the kernel here if you follow the correct order of flashing them .. I hv tested rom over both kernels and it was smooth with no problems So what you choose is upto you but i personally like Dorimanx
Both kernels are good though
Click to expand...
Click to collapse
I don't know. CyanogenMod may be smooth and all, but the GPS isn't working even with KH3 modem, unless set it to network/wi-fi/gps. And the camera also doesn't perform right. The colours are desaturated and it doesn't focus right. I think I'll roll back to official stock 4.1.2 for this device...
Could you tell me which is the best stock 4.1.2? I'm from Romania, and here we have this version "I9100XWLSS_I9100OXFLS3_COA_4.1.2". But they didn't put any effort into it...
Thank you.
Lucian Andries said:
I don't know. CyanogenMod may be smooth and all, but the GPS isn't working even with KH3 modem, unless set it to network/wi-fi/gps. And the camera also doesn't perform right. The colours are desaturated and it doesn't focus right. I think I'll roll back to official stock 4.1.2 for this device...
Could you tell me which is the best stock 4.1.2? I'm from Romania, and here we have this version "I9100XWLSS_I9100OXFLS3_COA_4.1.2". But they didn't put any effort into it...
Thank you.
Click to expand...
Click to collapse
All stocks are the same only difference is the location and language as far as i know get your required zip from samfirmware.com as per your location and flash it through odin. It should work !!
But gps is working fine in cm11 for me .. Dont know why its not working in your device mate !!
GreenArrow_I9100 said:
All stocks are the same only difference is the location and language as far as i know get your required zip from samfirmware.com as per your location and flash it through odin. It should work !!
But gps is working fine in cm11 for me .. Dont know why its not working in your device mate !!
Click to expand...
Click to collapse
I don't know about that. I don't think it's just the location and language. For the language, all the location firmwares have all the languages included. But, not all the location firmwares are the same. I'm sure some of them have more work put into them than others. That's why some of them are buggy, having boot loops, very high battery consumption and slow response in apps and menus. Get my point? That's why I asked which country has the best official rom.
@Lucianandries, i came here after a long time. Some issues. Exams preparation, you know . I want to ask if your other problems are solved or not.? As for "application stopped" error. It is usually normal in Cyanogenmod. I also sometimes face this and that's why i don't use CM. Try to use "Official" builds. They are good.!
Since i updated my nexus 9 to 5.0.1 the battery won't charge above 2%. It says 11 minutes left and i can't use it more than 15 minutes! I tried wiping cache but it doesn't solve the issue.
Ali.G said:
Since i updated my nexus 9 to 5.0.1 the battery won't charge above 2%. It says 11 minutes left and i can't use it more than 15 minutes! I tried wiping cache but it doesn't solve the issue.
Click to expand...
Click to collapse
I included some screenshots. Cable is plugged into outlet! But it says not charghing although you can see the icon in the statusbar charging!? It say battery Dead!
not charging after lollipop 5.0.1
Ali.G said:
I included some screenshots. Cable is plugged into outlet! But it says not charghing although you can see the icon in the statusbar charging!? It say battery Dead!
Click to expand...
Click to collapse
Hi, I am having the same issue, after dwnloading and installing Lollipop 5.0.1 the tablet is not charging anymore. Tried different cables and is not charging anymore. Do you know how to fix it? I am thinking to download the 5.0.1 image and install it.
dolana said:
Hi, I am having the same issue, after dwnloading and installing Lollipop 5.0.1 the tablet is not charging anymore. Tried different cables and is not charging anymore. Do you know how to fix it? I am thinking to download the 5.0.1 image and install it.
Click to expand...
Click to collapse
Sorry to hear you have the same issue. I send my tablet back for replacement!
I would flash all the images again. More than likey either boot.img or recovery is corrupted. They both control charging.
Hi all, i'm having the same problem... have you been able to fix it?
Unfortunately it's impossible to me to send it to RMA so I need a miracle :crying:
Hello guys,
I've recently bought a Redmi Note 3 Pro (3GB RAM) and the first time I booted it up it showed that it has -2% battery life. Since this seemed strange I tried to charge for several hours, but no change was noticed. I then tried with a battery calibration app, tried factory reset and restarting the phone, but nothing helped. I am also not able to go in recovery mode for hard reset as it states that there is no charge ...
The strange thing is that the phone is working for now and I am using for a second day with still the same bug. This leads me to believe that the problem is most likely caused by incorrect battery stats saved on the phone, but I am not sure. I am also not willing to root it or flash it since it is brand new and I might lost the warranty.
Can you guys suggested me a solution for this or the problem is not easily recoverable?
Thank you for the time and answers!
I have the exact same problem, tried resetting everything, I suspect it is a hardware problem.
awedxz said:
Hello guys,
I've recently bought a Redmi Note 3 Pro (3GB RAM) and the first time I booted it up it showed that it has -2% battery life. Since this seemed strange I tried to charge for several hours, but no change was noticed. I then tried with a battery calibration app, tried factory reset and restarting the phone, but nothing helped. I am also not able to go in recovery mode for hard reset as it states that there is no charge ...
The strange thing is that the phone is working for now and I am using for a second day with still the same bug. This leads me to believe that the problem is most likely caused by incorrect battery stats saved on the phone, but I am not sure. I am also not willing to root it or flash it since it is brand new and I might lost the warranty.
Can you guys suggested me a solution for this or the problem is not easily recoverable?
Thank you for the time and answers!
Click to expand...
Click to collapse
Try updating, I had this issue with custom ROM's something certain boot images have this bug.
I flashed a new boot image and bug was gone but had no wifi reverted back to latest global stock via MiFlash.
If you have TWRP try the ROM here https://xiaomi.eu/community/threads/6-7-7-11.32639/ it seems ok.
Did anyone find a fix for this issue. I have the same problem. Battery percentage shows negative 2% and I can't get into recovery because of that. When I press Power and Volume + It shows the battery icon in red and won't let me into recovery. I have the Redmi Note 3 Pro Snapdragon version.
I tried flashing a couple of ROMs via MiFlash with no positive results.
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
5t4m said:
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
Click to expand...
Click to collapse
What rom are you using?
EkiFox said:
The camera fix works only with Santosh's CM13, not with other CM/AOSP roms
the new kernel Radon V1.8 by Umang96 does not fix the battery problem
Click to expand...
Click to collapse
The Radon V1.8 Kernel actually causes this bug on MIUI based roms, so don't flash the kernel.
Radon Version 1.9 will resolve the battery bug on MIUI and other roms.
Talking about cm/aosp I tried almost all combination kernel/rom.
No success except for this particular cm with camera patch.
Same problem with battery, showing -2% but phone is working... Plz provide solution asap
If u run MIUI, just download FASTBOOT ROM, restart phone to FASTBOOT MODE and flash ROM using this tool. But if u run custom ROM just flash custom kernel (like RADON).
5t4m said:
Maybe a bit late, but the "camera fix" in this Thread fixed my "-2%"-Battery
http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Just flash with TWRP.
Click to expand...
Click to collapse
Fixed the -2% Bug on latest CM13-Snapshot for me!
You Sir are awesome
flashed the latest global firmwareware(not developer one) solved my issue, also now my phone updates OTA.
Use only the official rom. custom that sellers flash usually is a junk just with additional options for menu's language!
Same problem with battery, showing -2% but phone is working... Plz provide solution asap what to do. .. mobile automatically switch off too
Geeta_ghai said:
Same problem with battery, showing -2% but phone is working... Plz provide solution asap what to do. .. mobile automatically switch off too
Click to expand...
Click to collapse
Flash the latest miui ROM in edl mode using miflash. That is the answer.
No
No that is not the answer it's a hardware issue short circuit in motherboard
induna said:
Flash the latest miui ROM in edl mode using miflash. That is the answer.
Click to expand...
Click to collapse
androidnandroid said:
No that is not the answer it's a hardware issue short circuit in motherboard
Click to expand...
Click to collapse
Hmm, well flashing an official ROM in edl mode has fixed this problem for many people, including myself. So it would seem that in most cases at least it IS a software issue that can be fixed by flashing.
My phone came from Banggood and a vendor ROM that wouldn't even support my FP reader, Goodix, and which booted up with the -2% battery bug out of the box. Flashing the official global stable ROM, 8.0.2.0 at that time, fixed all of the issues.
Hmmm may be sir but that doesn't seem to fix mine although mine is from xiaomi only and the problem came after using 6 month suddenly without any reason one morning
Ok guys there are 2 solutions to this problem one is drain your battery and don't charge it for 2 3 days drain it like he'll coz after switch off still some juice is left you have to drain completely and other rapid method is open your redmi note 3 and disconnect battery cable and reconnect it... The problem is not software its hardware where battery reading stuck at minimal which is - 2 ... Thinking minus two hours coz at zero still some battery left for edl and fastboot mode time and alarm... Fixed my redmi note 3 hope it will help you.. Coz tried all method format... 10 times flash all roms through fastboot mode Coz updater mode won't work coz of low battery reading... Enjoy guys
I am having a same issue with redmi note 3 SD version. Tried everything Global BETA ROM, STABLE ROMs but didnt solved my issue. Showing -2% bettery in every ROM which i have flashed.
I am facing a similar problem where my phone showed -2 as battery level but my phone is not booting at all without any charger attached. and even when the chargr is connected it boots upt the Mi Logo and then displays an empty battery which wont charge even when tried for hours. Please help
razy111 said:
I am facing a similar problem where my phone showed -2 as battery level but my phone is not booting at all without any charger attached. and even when the chargr is connected it boots upt the Mi Logo and then displays an empty battery which wont charge even when tried for hours. Please help
Click to expand...
Click to collapse
I had the exact same problem like this one on xiaomi redmi note 3 pro sd. I tried flashing fastboot miui 10 official but the problem still there. I also tried changing the usb charging port but still the same. I tried plug in the charger and hold power and + volume and it stuck at mi logo.
I want to know if anyone fix this?? Please help.
Hello everyone,
at first - best ROM I ever tried!
Just one big problem for me:
When the screen is off (sleep mode), I CAN NOT unlock the phone with fingerprint - during first 5 seconds - when display is off, it works. I have to turn on display with power button and AFTER that I CAN unlock with fingerprint with no problems. I want to unlock my phone with fingerprint when the display is off even more than 5 seconds.
Is there a solution?
In stock ROM (16s International) everything works perfect, there were no time limitation. Fingerprint worked everytime even when screen was off for 10 minutes for example.
Where is the problem? It is no hardware problem for sure.
Someone said to use the same finger 3 times instead of 3 different fingers. Try it. It may solve your problem.
I am using the same ROM without the problem which you experienced although sometimes it took more than a second or required a couple of taps on the sensor to unlock the screen.
Go to settings, battery, power saving managements and see if the Ultra Long Standby During Sleep is turned ON. I have that disabled.
Edit. Sorry, I thought that you had the manufacturers' ROM. I had the factory ROM.
I have the same 3 fingerprints for better recognition for sure, but this tip did not help me.
Also I tried to turn off the Long sleep too, did not help to solve this.
Any other ideas @madsurfer1? With screen ON works flawlessly.
Hi guys
I'm experiencing exactly the same issue with my fresh received x829. Haven't tried much on stock ROM but apparently everything was working. Then I flashed AOKP and lignage os v13, and with both the fingerprint only works in the 5 seconds after screen off. And when I mean works, I mean detect a finger, if it's the good one unlocks and if not shows an error. After 5 seconds, the phone shows nothing at all, no unlock and no error.
Have you had any success since these posts ?
Regards
AOKP on my x829 has fingerprint "working" from sleep. It sometimes takes a while or multiple attempts though.
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
same problem
bolof2 said:
Thanks bwalter
@Razor99 any news on your side ? Looks like only you have the exact same issue I encounter.
Click to expand...
Click to collapse
hi
i have the same problem with most of the roms,
is there any solution?
My solution was full wipe, including internal storage. After than clean install ROM. With these steps fingerprint begin works even in deep sleep mode.
Keep in mind that Max 2 has very bad fingerprint at all on every model compared to premium brands. It is slow and sometimes react after few attemps. But works.
If theese steps wont help you - proove claim to the seller of your mobile.
If fingerprint is your priority, I strongly recommend another model, except Le Max 2. Maybe Le Pro is now better with fingerprint.
Try it and let us know.
https://forum.xda-developers.com/showthread.php?t=3408395
Flash latest CN 23S modem, fp problem bye bye!
hackerpower said:
Flash latest CN 23S modem, fp problem bye bye!
Click to expand...
Click to collapse
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
bolof2 said:
Indeed hackerpower, I saw your post on the other topic https://forum.xda-developers.com/le-max-2/how-to/le-max-2-finger-print-t3408395/page16#post71613937 and for me, that did the trick, without flashing another rom or wiping anything.
Thanks a lot!
Click to expand...
Click to collapse
glad I could help!
how do we flash modem only? i want to try the 23s china modem
updiliman said:
how do we flash modem only? i want to try the 23s china modem
Click to expand...
Click to collapse
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Moon75 said:
Download under China folder (23S v0033 I think), link for download in this post: https://forum.xda-developers.com/showpost.php?p=71613937&postcount=151
Flash the modem zip file by Twrp recovery.
Click to expand...
Click to collapse
Flashed the 023S modem and BAM! it works!!! Thanks a lot!
For me, I found flashing the dev 66 modem fixed this wake problem.
the phone when switched on works and charges regularly but now when I insert the cable the phone vibrates then the oneplus and Android logos appear then the screen turns black and starts again with the vibration and so on . I bought the phone shortly after the exit and at the beginning it recharged regularly from off. I tried to change the cable and the power supply, I did the hard reset and tried to reinstall the current version of the OS but the problem persists. I ask myself is a bug of the software or a hardware defect, does anyone know how to solve the problem or do I have to resign myself and send it to assistance
Frenkc said:
the phone when switched on works and charges regularly but now when I insert the cable the phone vibrates then the oneplus and Android logos appear then the screen turns black and starts again with the vibration and so on . I bought the phone shortly after the exit and at the beginning it recharged regularly from off. I tried to change the cable and the power supply, I did the hard reset and tried to reinstall the current version of the OS but the problem persists. I ask myself is a bug of the software or a hardware defect, does anyone know how to solve the problem or do I have to resign myself and send it to assistance
Click to expand...
Click to collapse
Did you try to do a local upgrade to the same OOS version? Maybe that will help.
If you're in lastest stable 10.0.8 try to flash open beta and see if problem persist
Macusercom said:
Did you try to do a local upgrade to the same OOS version? Maybe that will help.
Click to expand...
Click to collapse
yes I tried, now the latest version of os is 10.0.8 and finding it here on xda I have already done it but nothing
FSadino said:
If you're in lastest stable 10.0.8 try to flash open beta and see if problem persist
Click to expand...
Click to collapse
I can try, but can you tell me if I lose my personal data by switching to the Open Beta? Then can you tell me how stable Open beta is?
Frenkc said:
I can try, but can you tell me if I lose my personal data by switching to the Open Beta? Then can you tell me how stable Open beta is?
Click to expand...
Click to collapse
You loose your internal data if you switch between stable and beta releases.
FSadino said:
You loose your internal data if you switch between stable and beta releases.
Click to expand...
Click to collapse
ok then I'll wait to try