Hi, i have received today my Leeco Le Max 2 x829 but i can't turn on, i have tried to turn on my phone but nothing, i don't have leeco logo or anything.. my phone just vibrates 2 short times and after 2-3 sec another long vibration coming.
I have tried to turn on my phone for the first time without nano sim, now i have put my nano sim in but it's the same, nothing but the vibration.
I have also tried to turn on my phone in recovery mode with the down volume and on off button but it's the same..
I have also tried to connect my phone to my pc but he does not recognize him.
Please help me, thank you and sorry for my bad english.
try recharging the battery first?
Yes i try and ill be back to say if it's good
Thank you
Ok i have charge my phone not at 100% but now i have tried to turn on and nothing but i have a Blue LED on the top.
YamDzz said:
Ok i have charge my phone not at 100% but now i have tried to turn on and nothing but i have a Blue LED on the top.
Click to expand...
Click to collapse
Blue led of death -
Do some research. Good luck.
cy-rock said:
Blue led of death -
Do some research. Good luck.
Click to expand...
Click to collapse
Ok thanks .... atleast i know the problem now. Thank you for your help!
take it easy,, calm down.
first go to recovery mode by [Power + volume up].
if it work then do clear data.
if not then you need to go QDLoader mode and do another steps to get your mobile work again.
here
I have tried the recovery mode but nothing. The phone stay off and vibrate 2 Times and one long Time and then the blue led appears. Ill try the qdloader and ill be back thanks
It would be better to return it then try to fix.
AhmadSant said:
take it easy,, calm down.
first go to recovery mode by [Power + volume up].
if it work then do clear data.
if not then you need to go QDLoader mode and do another steps to get your mobile work again.
here
Click to expand...
Click to collapse
on your link they said "1) To enter Qualcomm Recovery mode, first turn off the phone and go to step 2
2) Keep pressed Vol Up (+) and Vol Down (-) together and connect the phone by USB cable to the computer.
3) You will see that the computer will install drivers for "Qualcomm HS-USB QDLoader 9008"."
But on my computer nothing appear
YamDzz said:
on your link they said "1) To enter Qualcomm Recovery mode, first turn off the phone and go to step 2
2) Keep pressed Vol Up (+) and Vol Down (-) together and connect the phone by USB cable to the computer.
3) You will see that the computer will install drivers for "Qualcomm HS-USB QDLoader 9008"."
But on my computer nothing appear
Click to expand...
Click to collapse
plz make sure it is appear in device manager as shown here
if not, then press on power for one minute and give another try again from step 1.
AhmadSant said:
plz make sure it is appear in device manager as shown here
if not, then press on power for one minute and give another try again from step 1.
Click to expand...
Click to collapse
Ok it's good thanks but now when i trying to flash the phone at the end i have a failed message ...
the % bar go 1% to 100% in 2seconds and i have the error message
YamDzz said:
Ok it's good thanks but now when i trying to flash the phone at the end i have a failed message ...
the % bar go 1% to 100% in 2seconds and i have the error message
Click to expand...
Click to collapse
okay, again be sure of these steps:
4) start "main.exe". then on "Flash Type" select "Qualcomm - flash dead phone.
5) Select your phone - "COM ..." from "Select device" - here should be the same COM ... as it shown in Device Manager under Ports (COM & LPT) > "Qualcomm HS-USB QDLoader 9008 (COM ...)"
6) Select File "LeMax2QFIL.zip" from the folder where it is saved
Related
My phone is bricked and even if i want to flash a ftf at flashtool it doesn't sees my phone :crying::crying: When i connect the wall charger sony logo comes and red led lights then everything closes. And when i hold volume up+power phone vibrates first once then three times. please help
VOL UP+POWER =3 VIBRATION, mean you turn off the phone. No problem.
Step by step.
Turn off the phone. hold volume - and conect to computer. The led turn green?
The same, but with volume+ ¿the led turn blue?
Is very dificult brick totally the phone, we will unbrick, dont worry.
Flamenawer said:
VOL UP+POWER =3 VIBRATION, mean you turn off the phone. No problem.
Step by step.
Turn off the phone. hold volume - and conect to computer. The led turn green?
The same, but with volume+ ¿the led turn blue?
Is very dificult brick totally the phone, we will unbrick, dont worry.
Click to expand...
Click to collapse
Yes if i hold vol up+power blue led comes and if i vol down+power green light comes. At flashtool i selected fastboot and selected flash kernel and flashed recovery.img as kernel. and that happened. i think thats the problem but is there a way to fix it?
Yes!!!!!! You're doing it totally wrong.
Recovery must be sideloaded via adb shell.
You'll need to flash your firmware and then follow the right steps to sideload a new recovery.
Enviado desde mi E2306 mediante Tapatalk
To unbrick you phone the only needed is flash your stock rom,excluding all minus the kernel. This will work and you hold your recovery with the phone working and you will can flash the root zip.
Flamenawer said:
To unbrick you phone the only needed is flash your stock rom,excluding all minus the kernel. This will work and you hold your recovery with the phone working and you will can flash the root zip.
Click to expand...
Click to collapse
But the problem is flashtool doesnt't recognize my phone now. if i can solve this i can open my phone again but how?
Please try put here the log. Uninstall flashtool 9.19,is buged, and install 9.18 and try again. Flashmode and check all except kernel
Flamenawer said:
Please try put here the log. Uninstall flashtool 9.19,is buged, and install 9.18 and try again. Flashmode and check all except kernel
Click to expand...
Click to collapse
i installed 9.18. i connected the phone to the pc when i connect phone to pc the led become green. and i opened the flashtool. in the log it says device connected in flash mode. but when i click the bolt and select the flashmode my device doesnt appears there. and after a while it says device disconnected
vurucumiller said:
i installed 9.18. i connected the phone to the pc when i connect phone to pc the led become green. and i opened the flashtool. in the log it says device connected in flash mode. but when i click the bolt and select the flashmode my device doesnt appears there. and after a while it says device disconnected
Click to expand...
Click to collapse
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Flamenawer said:
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Click to expand...
Click to collapse
Thank ill try when downloaded the ftf
Flamenawer said:
Change the order, first run flashtool,flashmode,selec the rom,check all except kernel,wait,after flastool say you connect the phone.
Turn the phone off with volume up + power until vibrate 3 times. push and hold volume- and connect the usb to the computer, the flash will start.
Click to expand...
Click to collapse
It worked so much thanks you are my lifesaver :good::good:
Im happy for help you, I will have a good day for this. Enjoy
Dont mind me
I need 10 posts to post a picture
i know i'm probably late but when I boot into flashmode and the green light comes on, after a bit it disconnects from my pc and then reconnects, interrupting the process, can anyone help?
JakeMini123 said:
i know i'm probably late but when I boot into flashmode and the green light comes on, after a bit it disconnects from my pc and then reconnects, interrupting the process, can anyone help?
Click to expand...
Click to collapse
Interupting the process? Same hapened to me. Be sure to connect your phone only when everything is ready, so when the flashtool asks you to connect your phone, and not before. Worked for me.
ekin_strops said:
Interupting the process? Same hapened to me. Be sure to connect your phone only when everything is ready, so when the flashtool asks you to connect your phone, and not before. Worked for me.
Click to expand...
Click to collapse
I do connect the phone when everything is ready and flash tool tells me to connect flash tool in flash mode, but it's like a bomb, the green light stays green for about 10 seconds, goes back to red then in 2 seconds back to green so i can never flash anything in time, please help
JakeMini123 said:
I do connect the phone when everything is ready and flash tool tells me to connect flash tool in flash mode, but it's like a bomb, the green light stays green for about 10 seconds, goes back to red then in 2 seconds back to green so i can never flash anything in time, please help
Click to expand...
Click to collapse
It could be also your drivers. Which windows do you have?
What should i do of it goes into the select language part but when i try to select anything it doesn't respond and just restarts again and again. Even if i tried rebooting through twrp it's still the same
Please help.
ekin_strops said:
It could be also your drivers. Which windows do you have?
Click to expand...
Click to collapse
Windows 7 but all the drivers are installled and working fine from the last time I plugged in my xperia.
JakeMini123 said:
Windows 7 but all the drivers are installled and working fine from the last time I plugged in my xperia.
Click to expand...
Click to collapse
Pluged in like file transfer or like flashmode and fastboot mode?
So i was using RessurectionRemix (a version from last month) and recovery twrp 3.1.0-0 and the phone was working great!
Yesterday i left my phone charging over night and in the morning i wake up to my phone bootlooping!
So i tried different things including everything it says here https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949 without luck
I can get it into recovery and fastboot but as soon as i let the key combination go the phone stops and just shows a black screen (screen is on) and i cant get into qualcomm recovery to flash!
And the only way to shut off the phone is by holding power + vol up + vol down!
Any solution or suggestions?
Use flashone method to unbrick
md07 said:
Use flashone method to unbrick
Click to expand...
Click to collapse
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
try to flash fastboot rom from cucoco's.
Tsoler said:
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
Click to expand...
Click to collapse
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
md07 said:
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Click to expand...
Click to collapse
Did what you said but nothing happens
kayyappan said:
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when the you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
Click to expand...
Click to collapse
Phone gets recognized but not long enough to do anything (windows makes sound but doesn't install anything and doesn't show up in device manager)
try this guide
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
After a lot of trying i found out that when i keep pressed power + vol down or vol up while connected to pc and device is off it gets recognized as
qualcomm hs-usb qdloader 9008 long as i keep the keys pressed so i tried the flashone method but it just says could not connect
Are Qualcomm drivers loaded on your computer? I have not used flashone. I used QPST to see if phone is connected. I am not sure if they are same.
kayyappan said:
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
Click to expand...
Click to collapse
It doesn't stay long enough in recovery or fastboot to do anything it shuts off after a few seconds even with the buttons pressed after that it just shows a black screen
Phone vibrates when i press power and shows leeco logo (not os logo) and after 1-2 seconds screen goes black and phone vibrates again and shows leeco logo again and just continues looping
if i try to press power + vol up normally it goes into recovery but as soon as recovery is loaded screen goes black (screen on just doesn't show anything) the same goes for fastboot if i press power + vol down it loads fastboot but after 1-2 seconds screen goes black
if i keep pressing keys the phone just stays longer in recovery/fastboot but only 4-5 seconds
I assume you have adb and fastboot. Since you say the screen remains on when booting to recovery open a command prompt at the directory where adb is and issue a command "adb devices" without quotes. Does it just exit without showing any device or throws up some error? Try this irrespective of the black screen.
Have you looked at and tried what is given by @HTC-TYTN2 at post #8? It is for Le Max 2 and you will find a link to Quallcomm drivers too. Do not bother that the link mentions X820 even your Max 2 is 821, 829, etc.
since it happened after charging, you might want to check your cable and battery. best is to get a cheap usb multimeter.
Gesendet von meinem LEX820 mit Tapatalk
I too thought it could be the battery based on that's the screen goes off. But he also mentioned that the screen remains on but nothing to be seen after a short while. Wanted to suggest slow speed charging probably via a laptop usb as I'm not sure if he used high speed charging resulting in battery issue.
Did you solve the problem?
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Tsoler said:
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Click to expand...
Click to collapse
Try this:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp ?, only by fastboot
RaphaBraga23 said:
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp , only by fastboot
Click to expand...
Click to collapse
Try this via fastboot mode.:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
medja77 said:
hi everyone happy new year. pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/lg-g5
With that stated...
Your best bet is probably to take a look at the following thread and, if needed, post your question within that thread.
https://forum.xda-developers.com/showthread.php?t=3350648
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
medja77 said:
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
Click to expand...
Click to collapse
Sorry to hear this...
Have you the Fastboot access? How to Check:
1) Remove Battery and put it back
2) Press and hold Volume - (Volume down) and connect via USB to your PC
3) The Phone Screen should change now and you can read something about Fastboot Mode
OR
Can you set your Phone into Firmware Download Mode?
1) Remove Battery and put it back.
2) Press and hold Volume + (Volume up) and connect via USB to your PC
3) The Phone goes normaly into Download-Mode now, see it on Phone Screen
4) Open LG Bridge and go to Update and then in the Bottom right Hand side onto >Correct Update Errors< this will flash your Phone with the Stock Rom
Working for you?
Hi everyone i have a xiaomi redmi 3 pro i think because it has 4 gb of ram, and it doesnt on anymore. I was flashing the stock rom with twrp but it block the process, I turned off my phone and now it doesn't on. No fastboot, No recovery, nothing. The screen doesn't on.
I've tried to connect it with the computer, and it shows a "Qualcomm HS-USB QDLoader 9008 (COM 20)" so I've read some guides that made me use the xiaomi flash tool but when I tried to install the global rom but il fails with "cannot receive hello packet"
PLEASE HELP ME I DON'T KNOW HOW TO DO!
leocap33 said:
Hi everyone i have a xiaomi redmi 3 pro i think because it has 4 gb of ram, and it doesnt on anymore. I was flashing the stock rom with twrp but it block the process, I turned off my phone and now it doesn't on. No fastboot, No recovery, nothing. The screen doesn't on.
I've tried to connect it with the computer, and it shows a "Qualcomm HS-USB QDLoader 9008 (COM 20)" so I've read some guides that made me use the xiaomi flash tool but when I tried to install the global rom but il fails with "cannot receive hello packet"
PLEASE HELP ME I DON'T KNOW HOW TO DO!
Click to expand...
Click to collapse
I have very similiar problem with you, i hope someone has a solution
Wikusaurus said:
I have very similiar problem with you, i hope someone has a solution
Click to expand...
Click to collapse
Edit: I've found the solution.
1. go into EDL mode by pressing Power vol+ vol-
2. use miphone 20151028, don't use recent mi flash
3. Flash TWRP
4. Proceed to flash ROM (in my case i use RR Os) via TWRP
Hello, is it possible that I have my phone bricked after a battery replacement?
Heres what happened: I had obviously a battery problem. So I ordered one from ebay and I replaced it. The new battery seem to work, however the phone will not respond to the buttons. Not any buttons. Only if I plug in a cable, mi logo appears for a few seconds and then a big battery bar shows for a few more seconds. Then nothing. (If I put in the old battery and I plug in a cable, the reaction is the same BUT no battery bar appears). The phone does not respond to any buttons like vol +/- holding together with power on, etc. Any help? Thanks, Filip.
Dexaderon said:
Hello, is it possible that I have my phone bricked after a battery replacement?
Heres what happened: I had obviously a battery problem. So I ordered one from ebay and I replaced it. The new battery seem to work, however the phone will not respond to the buttons. Not any buttons. Only if I plug in a cable, mi logo appears for a few seconds and then a big battery bar shows for a few more seconds. Then nothing. (If I put in the old battery and I plug in a cable, the reaction is the same BUT no battery bar appears). The phone does not respond to any buttons like vol +/- holding together with power on, etc. Any help? Thanks, Filip.
Click to expand...
Click to collapse
your battery/connector/header(on mainboard side) seems broken. battery usually does not impact any software. It's better if you open new thread specifically about your problem, so anyone can join to discuss further.
Hello everyone,
I'm here because I tried so much guides to unbrick my Xiaomi Redmi Note 3 pro SE without any sort of good result...
Mine is stuck on EDL mode (Qualcomm HS-USB QDLoader 9008 thanks to a homemade deep cable).
I can't boot with the power button and I don't know why, it looks like the button doesn't work anymore .
Sometimes, I can boot on fastboot mode by plugging the cable and pressing VOL- and sometimes it doesn't work
Can someone help me to ger rid of this problem please?
Thanks in advance guys
Do not hesitate to ask me more informations, I'll try to give you an answer.
Edit : I just tried this guide en.miui(dot)com/thread-235865-1-1.html and the flash was succesful.
I have now fully access to fastboot mode.
But now my phone keep showing Mi logo and rebooting. Any idea ?
Edit2 : i've done this one now xiaomitips(dot)com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution
But now my phone is showing Mi logo and vibrating then rebooting...
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide and working great
Try it
Leftrand said:
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide
Try it
Click to expand...
Click to collapse
Thanks for the response, i'll try your guide
I did your guide, flashed TWRP but same result. I can't press POWER button and when i try to boot on recovery with VOL+ and plugging the usb cable, mi logo and rebooting...
Rtxx said:
I did your guide, flashed TWRP but same result. I can't press POWER button and when i try to boot on recovery with VOL+ and plugging the usb cable, mi logo and rebooting...
Click to expand...
Click to collapse
Why u r plugging the usb cable and pressing vol+ ?
To do wat?
Black_Stark said:
Why u r plugging the usb cable and pressing vol+ ?
To do wat?
Click to expand...
Click to collapse
Leftrand said:
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide and working great
Try it
Click to expand...
Click to collapse
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Rtxx said:
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Click to expand...
Click to collapse
U can unplug cable. No harm.
Press and hold together vol up + power. And release both immediately with vibration. U will boot into twrp.
Rtxx said:
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Click to expand...
Click to collapse
Press power and volume up while still plugging after
flashing done about 10 second ?
I did everything you guys said but my phone is still blocked in bootloop
Look at my video -> youtu(dot)be/pi2-fnSNGGA
Rtxx said:
I did everything you guys said but my phone is still blocked in bootloop
Look at my video -> youtu(dot)be/pi2-fnSNGGA
Click to expand...
Click to collapse
Sad ?
Did you check hardware yet or emmc ?
Leftrand said:
Sad
Did you check hardware yet or emmc ?
Click to expand...
Click to collapse
I don't know what you mean by checking hardware, eveything was working well until I failed my flash and then my phone was bricked.