I need help when i update my gs7101b the power got turned off then i restart the device its black totally black no led indicator.
I could shock the pins but i lost my usbcable is there anyway to recover the device???????
It could also accept charge but no light or display.
Related
My phone hung this morningso I poked the hole at the back and asumed the soft reset would work OK.
After lunch I looked and found it on the splash screen.
I have tried leaving the battery out and removing the memory card
but still no joy. It starts up, I get the HTC splash screen with red writing with ROM details (PK3.0) the red writing goes leaving just the splash screen and thats it.
The power light (round the joystick) does NOT come on at all - even with the power lead plugged in, unless I remove the battery - in which case it comes on solid red.
Holding the power button does not turn the device off.
Taking the battery out to turn off then putting battery in and connecting charger has resulted in an orange charge light but if I turn on the device the charge light goes off.
Any ideas?
My only idea is the same old story... try hard resetting the device. Volume slider DOWN and soft reset hole
Phone Model - Motorola Cliq (MB200)
My battery got totally drained yesterday afternoon, when i was charging it, i tried to turn it on, apparently i was able to get to the bootscreen (with the M logo in the middle) when all of a sudden it shut down after a few seconds. When I tried turning it back on again, the screen won't display anything at all, just black screen. I kept on pressing the power button continuously and it would vibrate and the LED notification light at the upper right corner is lighting up, which indicate that it's trying to boot however it still wouldn't display anything. I tried removing the battery, sim and sdcard and plugged it into the computer, the keyboard together with the LED light, will both light up but still black screen. I also tried charging the battery using a wall charger, but still no luck. I'm currently running CM7. RSD lite wouldn't recognize my phone anymore. I'm just wondering if you guys could help me out? and was it hard bricked? Is there any solution to this matter aside from the SIG method? Or might it be the battery that i should change?
Would really appreciate your replies....
ok so was riding on a kayak, flipped but i held the phone above the water the whole time...guess got some water because of the splash, but the 2 water indicators i see, on battery and under are fine. left the phone in rice for 12 hours. tried turning on and screen flickers some green multi color. i can tell it works, plug in charge led changes, volume buttons work, i can swipe up on screen.
anything i could do?
im rooted, should i have any concerns returning for warranty? if so, anyway to return to stock with screen not working? like i said phone looks like it behaves normal, blue led when starting, charging led when plugged in, volume keys work, can swipe up on screen etc.
thanks
i bought one more atrix for parts because i droped mine and destroy back cover
this atrix for parts is bricked, the man who sold me told me that
how to be sure is it hard of soft brick?
the phone want turn on, black screen only, no led, but it keeps heating if i press power button
wheb i plug usb led is on but nothnig more, my pc does not see new hardware
is there some kind of software which can flash this phone dead as is?
Hi guys,
So after a year of a broken screen, I fixed my Z2, after like 5 months of using it, she decide to broke again... It fall on the floor from like a meter height.
I do have a glass protection screen which is a bit cracked (thank god the screen itself is fine..) after it fall and also phone does have a rubber cover on it.
So it fall, at first I thought that my phone died cause it wasn't reacting to power button at all. So I thought why not try turning off the Z2 to see if its still alive by pressing the red button where the sim card is.
And here we are now, can't turn on my Z2 at all. Even if the power button was broken but I knew that phone is still alive I would unlock it by pressing the camera button (ups.. too late..).
So any idea if its the button itself broken like a plastic thing under the button that touches the connector on the flex or is it the entire flex that is broken ? I've no idea if the rest of the buttons are working as turn off my Z2 and can't test it.
Any idea what might be broken and is there an option to turn on the Z2 without the power button ? It does react to charging for sure as the LED lights up red for a sec and then its orange as the battery is 75% charged and screen is working too cause it does show the Xperia logo with an Android one and it does show battery charging level etc.
I don't know how to fix it but if you have recovery, you can boot to system normally.
Sent from my D6503 using XDA-Developers mobile app