Hello, my LeMax 2 randomly shut down this evening and when i tried turning it on, it got stuck on the LeEco logo screen, i waited for a couple hours and tried turning it off and on, and it goes to the same state (not sure if it matters but the sub-message it shows changes each time like "Breaking Boundaries for freedom" or "Not an Operating system but an Ecosystem" bla bla).
If i try to go into Recovery mode, it also gets stuck there, just showing the LeEco Logo and "Recovery Mode", the same with FastBoot mode.
I'm pretty oblivious with all this things, tried looking for some solutions but i can't really know if people had the exact same problem as me or not.
Is there any way to "reset" my phone? Needless to say, i didnt change any kind of thing, it has default rom, no root...
Thank you.
Try this and see if help.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
I think is the only way to fix your lemax.
Simonstruacion said:
Hello, my LeMax 2 randomly shut down this evening and when i tried turning it on, it got stuck on the LeEco logo screen
Click to expand...
Click to collapse
Hello. Do you have blue led?
Wysłane z mojego Le X820 przy użyciu Tapatalka
Not working
Beackman said:
Try this and see if help.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
I think is the only way to fix your lemax.
Click to expand...
Click to collapse
I did this method, and FlashOne completed the process just fine, showing no errors, but my phone is still the same way it was
Filozof71 said:
Hello. Do you have blue led?
Wysłane z mojego Le X820 przy użyciu Tapatalka
Click to expand...
Click to collapse
No, in fact, i don't even have a red led when entering Qualcomm Recovery mode (Up and Down buttons), Windows does detect it when i plug it in while doing so though.
After the process you dont even have access to fastboot?
How much time you wait before turn off the phone?
Because its take about 5 minutes to boot on first time.
Beackman said:
After the process you dont even have access to fastboot?
How much time you wait before turn off the phone?
Because its take about 5 minutes to boot on first time.
Click to expand...
Click to collapse
When it shut down for the first time, i had it booting for at least an hour, the same for recovery mode.
After trying the FlashOne method, both times, the phone stayed on for long periods of time, right now it's still on, but nothing happens.
Simonstruacion said:
When it shut down for the first time, i had it booting for at least an hour, the same for recovery mode.
After trying the FlashOne method, both times, the phone stayed on for long periods of time, right now it's still on, but nothing happens.
Click to expand...
Click to collapse
Did you manage to find a fix for your phone? It seems that same just happened for my x820
Related
Yesterday I downloaded a frimware for my phone, I installed it and my phone stucked on logo after insallation. I tried to enter to recovery and download mode but without success, for recovery I'ts black screen and for download mode it gives me an error "Low battery, can't download".
I left phone for whole night without battery and when I waked up I pressed "Volume -, Home, Power on" and I recieved "Low battery, can't download" then I put my phone on USB to take some charge and I've seen an animation for battery charging I left it for 5 minutes and I pressed buttons for download mode again and I entered to download mode.
I was so happy and of that I selected wrong frimware (the corrupted one) It failed on chapter "FACTORYFS" and it has disconnected automaticly from PC and ODIN, I bricked my phone again, now It's competly dead.
Now screen always black like it's dead and it wont:
-Show animation for charging
-Enter to download mode
-Enter to recovery mode
Please, what should I do, I love this phone so much, I have this phone almost 3 years and I won't to lose him?!:crying:
Oh,this one is easy...
Either waste your time trying usb jig(I wouldn't) or go the easy way and replace the motherboard.
Yep,that's all.
If your phone isnt recognized by pc and download mode or recovery doesnt works you are a dead man propably uou corrupted emmc by flashing corrupted files.
Wysłane z mojego GT-I9100 przy użyciu Tapatalka
The phone told me there was a new update I started to install it, got to reboot and now is just on the elephone logo which comes every 20 sec and goes again. I cannot turn the phone off or do anything with it. Any help please
For me just shut down the phone and then reiniciat the phone ....work for me....
Enviado do meu thor através de Tapatalk
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
stuck on elephone log after upgrade
My elephone P9000 is now cycling the elephone logo every 8 seconds or so after the latest audio upgrade... It will not switch off or do anything else. Did you solve the problem. Or anyone else help. Can you share with me? Thank you.
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
Click to expand...
Click to collapse
so my battery was fully empty now.. i even pressed the power button 100 times after the battery was empty, to make sure all current is out of the phone.
plugged in charger... after 10 seconds phone start itself (after viewing the picture of empty battery) and elephone logo shows short and then back to showing picture of empty batterie cycle. After some minutes, and battery is loaded a little bit, elephone logo cycles again.
So rest in piece my p9000, i can nothing, i cant do anything from my pc because its only starting for like 5 seconds, i cant shut it down because of that and i cant get in factory mode
i am so pissed right now
just wanted to install the new update, everything worked fine like all the times before that and now my phone is ready for the trashcan.
Is there any way to reset the software without getting in factory mode?
Reset from sp flash tools?
Pro4TLZZ said:
Reset from sp flash tools?
Click to expand...
Click to collapse
the phone turns on and off in a cycle of 5 seconds, so that wont work
and i cant stop that cycle.
even if battery is 0% (i even press power button many times so really its drained out). If i recharge it, the cycle starts again without me doing anything. The Power button is not broken or something. it all began after i started new ota update and the phone rebooted like "mkitty" has the same problem it seems
Same for me, I have no idea how to restart my phone. And i dont want to loose all data I have on it.
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
xvicedice said:
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
Click to expand...
Click to collapse
Hello,
Yes . I have tried that.
I have a list of options that come up on the screen.
I have tried them apart from the wipe data/factory reset.
But it is still the same result.
Thank you for help.
Any more ideas?
what OTA update version did you update?
Simplytouched said:
what OTA update version did you update?
Click to expand...
Click to collapse
It said something about wifi and audio update. I followed the instructions as per a previous update (which worked OK). I never took notice of any version numbers etc.
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
juka1 said:
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
Click to expand...
Click to collapse
Its actually a great phone. Do you have twrp installed and can you get access to it? You could always boot into twrp transfer over the ROM and install it from there. If you have installed the vcom drivers then when the USB not recognized alert pops up. Go to settings and device manager. Right click the unknown device and click let me pick driver. You should be able to install it from there
The only thing I can suggest is to take the back panel of and unplug the battery. There videos on how to do this if you search YouTube or the forum. Effectively you perform a hard reset of the phone.
If and when you do get it working just twrp installed and do a backup of the whole phone working before performing any future upgrades or Rom changes. Its just better safe then sorry.
thenk you very much for that
The problem is that when I connect the phone on the off to the pc starts again the cycling through the elephone logo so the pc sees the phone for a few seconds in which does not recognises it and then is like the phone goes off until the next cycle so no time to go to device manager and install manually. but thank you for the comment.
removing the battery will void the warranty. I had the phone only since may.
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
thank you
Android-UK said:
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
Click to expand...
Click to collapse
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
juka1 said:
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
Click to expand...
Click to collapse
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Android-UK said:
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Click to expand...
Click to collapse
sorry for all of this and thank you very much for your help but when I put the phone in recovery mode by pressing the down volume and power key and connect the phone to the pc it is not recognized by the pc so I can't flash the room
Hey community,
I tried flashing TWRP yesterday, all went well, then the phone wanted to restart but it just kept quiet and was off, just showing the red LED for 'Charging'.
When I connected it today, my PC recognized it as written above. I charged it the whole day today, because I read of this being helpful.
What should I do now? It doesn't boot to anything, just keeps to connect and disconnect every 1-2 seconds or so.
Thanks for any advice,
werdck
werdck said:
Hey community,
I tried flashing TWRP yesterday, all went well, then the phone wanted to restart but it just kept quiet and was off, just showing the red LED for 'Charging'.
When I connected it today, my PC recognized it as written above. I charged it the whole day today, because I read of this being helpful.
What should I do now? It doesn't boot to anything, just keeps to connect and disconnect every 1-2 seconds or so.
Thanks for any advice,
werdck
Click to expand...
Click to collapse
What version of TWRP did you flash and are you sure that it's for x2
LameMonster82 said:
What version of TWRP did you flash and are you sure that it's for x2
Click to expand...
Click to collapse
I basically used this: https://androidfilehost.com/?fid=24591020540824348
Edit:
Ok, seems one can be too stupid to even read... The package is distributed for the Le 2 Max, not Le Max 2.. Thought it was a typo...
Good day!
for some reasons my phone is restarting and restarting everything second.
by the way im on pixel experience 10 which i am using since last year, so i am counting out that the rom is or the problem.
i was using my phone till it slipped of my hands but suddenly catched it. then it starts to restart.
i tried going to recovery mode but a second or two after the TWRP logo shows up it just restarts itself. sometimes it goes up to the Google logo then it again restarts itself.
dont know what to do. please help. thanks!
lestervai said:
Good day!
for some reasons my phone is restarting and restarting everything second.
by the way im on pixel experience 10 which i am using since last year, so i am counting out that the rom is or the problem.
i was using my phone till it slipped of my hands but suddenly catched it. then it starts to restart.
i tried going to recovery mode but a second or two after the TWRP logo shows up it just restarts itself. sometimes it goes up to the Google logo then it again restarts itself.
dont know what to do. please help. thanks!
Click to expand...
Click to collapse
try entering fastboot mode and using the computer try formatting the data or reinstalling the ROM may work.
Sorry for my bad English I'm using Google translator
Nick120 said:
try entering fastboot mode and using the computer try formatting the data or reinstalling the ROM may work.
Sorry for my bad English I'm using Google translator
Click to expand...
Click to collapse
still cannot. 2-3sec after fastboot logo shows up the phone will restart.
Maybe the power button is the power... Check of it is in pressed condition... Or take to service center...
hello everyone,
my redmi note 3 pro special (kate) with locked bootloader and always original roms (never modified) has been stopped for about 2 years due to inactivity, but before it had always worked great!
wednesday I tried to turn on my kate.
the device went into continuous bootloop. whereupon I tried to enter fastboot, activate edl and flash with miflash a whole series of roms, from the last, to 9.6, 9.5, 6.7 and all those that can still be found, but always with the same disappointing result: the device makes the first start (sometimes forcing it with a restart because it remained enchanted for hours in the initial animation after the "mi" logo), but immediately during the initial configuration of the so returns to restart without allowing use.
whereupon, I decide to open the back of the redmi and disconnect the battery overnight, in the hope that this could solve any problems.
but unfortunately nothing...
after yet another flash and I start, I can't even start this morning: when I press the power button the fixed initial logo "mi" starts, goes off and starts again ... I'm practically in infinite bootloop ...
I only need the kate as a forklift, but I would be sorry to have to throw it away completely.
does anyone have a suggestion to get out of this troubles?
kletius said:
hello everyone,
my redmi note 3 pro special (kate) with locked bootloader and always original roms (never modified) has been stopped for about 2 years due to inactivity, but before it had always worked great!
wednesday I tried to turn on my kate.
the device went into continuous bootloop. whereupon I tried to enter fastboot, activate edl and flash with miflash a whole series of roms, from the last, to 9.6, 9.5, 6.7 and all those that can still be found, but always with the same disappointing result: the device makes the first start (sometimes forcing it with a restart because it remained enchanted for hours in the initial animation after the "mi" logo), but immediately during the initial configuration of the so returns to restart without allowing use.
whereupon, I decide to open the back of the redmi and disconnect the battery overnight, in the hope that this could solve any problems.
but unfortunately nothing...
after yet another flash and I start, I can't even start this morning: when I press the power button the fixed initial logo "mi" starts, goes off and starts again ... I'm practically in infinite bootloop ...
I only need the kate as a forklift, but I would be sorry to have to throw it away completely.
does anyone have a suggestion to get out of this troubles?
Click to expand...
Click to collapse
Factory reset
Black_Stark said:
Factory reset
Click to expand...
Click to collapse
I've tried several times... but... nothing
kletius said:
I've tried several times... but... nothing
Click to expand...
Click to collapse
Did u replace any component at repair shop?
Black_Stark said:
Did u replace any component at repair shop?
Click to expand...
Click to collapse
I've tried factory reset, flashing several roms, unmount the battery... now the phone Is witouth battery, i want to try keep witouth Energy a few days ...