Hai my dear frnds,
Iam sathish ,iam using nexus 6p in past 1years ,2months (so no warranty), 1 week before i update official nougat after that i face bootloop issue.
Bootloop : google logo appears after 10-15sec mobile restart and shows the same logo its the way iam facing the bootloop.
Note :
1) i can enter bootmenu but i cant enter into recovery mode.
2) my bootloader is locked(still iam not unlock it)
3) not rooted
4) usb debugging off
5)pure stock rom
Before this update my mobile working fine but after nougat update only i face such a prblms.google says its a hardware problem but iam sure its a software problem.
But my biggest dout is :its fixable or not?
There is any fix for this problem??
I search in lots of websites but there is no clear method and all are ask usb debugging ???
Anyone developer please help me iam begging u...advance thanks for all
Related
i two months back bought micromax canvas HD in the bigining it works properly after that i am getting launcher error suddenly i dont knw y it s coming than i upgraded it 4.2.1 successfully but the same problem i got i.e launcher error suddenly signal goes and everything happens when i removes battery and put it back it will be ok for some time tan the problems repeats again ok.suddenly y'dy what happend is same prob repeated i removed battery as usually and put it back but now phone is not turning on it showing CANVAS HD screen and remains for hours.i started recovery mode and wiped everythig data,cache repeatedly 4 to 5 times,but the result is same...what should i do is my phones hardware got any problem..anyone can help me my no.09640623143 because i am afraid of service centers listening that they wil not respond immediately.otherwise tell me good service center n hyderabad which will respond immediately.plz help me urgent frns..
nagarjuna.iu said:
i two months back bought micromax canvas HD in the bigining it works properly after that i am getting launcher error suddenly i dont knw y it s coming than i upgraded it 4.2.1 successfully but the same problem i got i.e launcher error suddenly signal goes and everything happens when i removes battery and put it back it will be ok for some time tan the problems repeats again ok.suddenly y'dy what happend is same prob repeated i removed battery as usually and put it back but now phone is not turning on it showing CANVAS HD screen and remains for hours.i started recovery mode and wiped everythig data,cache repeatedly 4 to 5 times,but the result is same...what should i do is my phones hardware got any problem..anyone can help me my no.09640623143 because i am afraid of service centers listening that they wil not respond immediately.otherwise tell me good service center n hyderabad which will respond immediately.plz help me urgent frns..
Click to expand...
Click to collapse
1. Is your phone rooted?
2. Have you tried to flash it again?
3. Remove any recovery and try to flash original firmware without root and check if problem still persists?
4. Was any antivirus installed?
reply to rajneeshk
rajneeshk said:
1. Is your phone rooted?
2. Have you tried to flash it again?
3. Remove any recovery and try to flash original firmware without root and check if problem still persists?
4. Was any antivirus installed?
Click to expand...
Click to collapse
1.no my phone was not rooted
2.s i have tried to upgrade by using sp tools and 4.2.1 but it is not detected its keeps on searching
3.i hav removed all the recoveries
4.yes i installed AVG pro from uc browser
now it is not showing charging info also
nagarjuna.iu said:
1.no my phone was not rooted
2.s i have tried to upgrade by using sp tools and 4.2.1 but it is not detected its keeps on searching
3.i hav removed all the recoveries
4.yes i installed AVG pro from uc browser
now it is not showing charging info also
Click to expand...
Click to collapse
try to create a new windows user with admin rights. install a116 drivers and try to reflash.
reply to rajneeshk
rajneeshk said:
try to create a new windows user with admin rights. install a116 drivers and try to reflash.
Click to expand...
Click to collapse
i have tried but still it is nt working
First u need to install the vcom drivers and then run sp tools as administrator privilege then it will work refer to how to flash stoxk rom in sp tools thread in general section.
Sent from my Micromax A116 using xda app-developers app
Hello everyone ,
it is nice for me to join your forum . i am posting this thread after weeks of searching and many tries but none worked
I have Huwaei Y520-U22V100R001C328B111 phone
the problem is that i lose the network signal because invalid imei problem
and many of error messages " Unfortunately app has stopped " for many apps
and when trying to restart the phone it stucks at the android system recovery e3 screen
i downloaded the official rom from huawei site Y520-U22V100R001C328B111
and installed it from the SD card from android system recovery e3 screen
bu selecting update from sd card or by using SP_Flash_Tool_v3.1320.0.174 which is included in the official rom downloaded through usb cable
and it worked but with invalid imei in both methods
i tied formating the phone with the bootloader file too as Huawei site explain and downloaded the rom again
it worked too but with invalid imei problem too
i tried to solve the invalid imei by rooting the phone or without rooting it and both methods worked and the phone works for couple of days then it fails again with "Unfortunately app has stopped" messages and invalid imei again then stuck again at android system recovery e3 screen
what else to do please ??!! :crying: i am hopeless now
Can anyone help me ??
Can you try this? Good luck!
Thanks RAZERZDAHACKER
But this is not my main problem , i can solve the invalid IMEI problem by 2 successful methods.
My main problem after flashing it , it stay couple of days works properly then some apps stop working and messages like " Unfortunately app has stopped " appear and when restart it it stucks at the android system recovery e3 screen
i am using the official rom from huawei site to flash it .
What to do else ??
Abdelrahman Elsobky said:
Thanks RAZERZDAHACKER
But this is not my main problem , i can solve the invalid IMEI problem by 2 successful methods.
My main problem after flashing it , it stay couple of days works properly then some apps stop working and messages like " Unfortunately app has stopped " appear and when restart it it stucks at the android system recovery e3 screen
i am using the official rom from huawei site to flash it .
What to do else ??
Click to expand...
Click to collapse
I assume you've redownloaded the ROM to remove possible corruption. Hmm, get a log for when that happens (maybe you did a pattern?) And do some research on it
RAZERZDAHACKER said:
I assume you've redownloaded the ROM to remove possible corruption. Hmm, get a log for when that happens (maybe you did a pattern?) And do some research on it
Click to expand...
Click to collapse
Sorry , i did not get you . what do you want me to do exactly ?
the phone situation now is stuck at android system recovery screen , and there is a file cllaed update.zip i moved it to SD card to apply update from sdcard , i got it from Huawei site was in Y520-U22V100R001C328B111 .rar
what to do now ?
hi.. my huawei y520-U22 goes to android recovery sytem recovery.. i've tried every steps to reset yet still it keeps going back to the recovery system screen..
what could be the possible reasons??
Hi , try to flash with this rom
1. Install Y520-U22 Usb Drivers
Link: http://www.mediafire.com/file/ez0wm6g70sen3m6/MTK+usb+drivers.rar
2. Download Huawei y520-u22 b112 scater + flash file password is huawei4
http://download1722.mediafire.com/e...Y520-U22+MTK6572+100%+tested+scatter+file.rar
3.Power Off your Mobile and remove Battery.
4.Download and extract spflash tool.
Link: http://www.mediafire.com/file/77rcxw2iew026i5/SP_Flash_Tool_v5.1408.00.rar
REST YOU HAVE IN THIS VIDEO
https://www.youtube.com/watch?v=O_slK9pMkoA
Good Luck
I recently bought a MiPad 4 from AliExpress and it keeps stopping me from flashing my rom with TWRP. The Bootloader seems to be enabled out of the box, but I cant get it to recognize after the fastboot screen. Anyone have a solution to this? I've seen a few people post that they had the issue and they solved it when some other users posted the link to the same MIUI forum thread but the link to that seems to be dead. So I currently have no leads to how to clear the fake ROM.
The developer setting for "Mi Unlock status" is missing and I also tapping the MIUI Version doesnt bring up settings like the stock rom should.
Seems to be sandboxed for some reason, when i get into fast boot it just goes to a black screen that says "press any key to shut down". And when i flash it with MiFlash, it errors, and I just end up rebooting the MiPad 4.
did you find any fix? I'm facing the same problem
ovexi said:
did you find any fix? I'm facing the same problem
Click to expand...
Click to collapse
It's not sandbox, it just doesn't work with Win 10 or usb 3.0. In my case I have to use my old win 7 laptop to unlock.
Hello Devs am Yashra22 , Oppo A37f user currently I was facing some IMEI and sim not getting detected issues with this device but Its fixed by restoring EFS backup from my friend phone who also have OPPO A37f and then restoring qcn using qfil. I had been excessively flashing/changing custom roms in devices as I was trying to port custom roms. So now am facing a very strange bootloop problem with this device , the problem is that when I flash any MIUI roms in this device it passes the boot logo , shows boot animation for 1 min and then reboot then again passes boot logo and show boot animation... this continues. but if I flash any other rom like Ressurection Remix it boots and works fine. This problem arised now, 1 month back I was able to boot MIUI roms
What I tried but no result - I tried Clean flashing MIUI rom , I tried flashing Stock Firmware with PC, i tried flashing Stock OTA.
Waiting for Anyone to reply , Thanks.
sorry for bad english
Hi guy
this is my first Question on xda so far
And i have this problem error massage
Device storage corrupt in ported touchwiz 6.1 Rom for
my galaxy core prime sm-g360h
this rom from j1 mini prime there hardware very similar
and i got this boots with huge success one problem tho
after it boots its shows this massage and iam unable
to enter to the ui and when i click on RESET DEVICE
it takes me to the Recovery (TWRP) and format data and boot back
with the same issue i still have hope this can work but i just totally
don't know what to do so if you have the same problem or faced it before
till me how to resolve this
and thank you in advance