I had flashed LineageOS on my OnePlus X a month ago, using TWRP. Today, when I tried to charge my phone, it wouldn't charge! I tried using chargers other than the original charger also, but to no avail. Even connecting the device to a PC didn't help.
Then, I reflashed the factory image (i.e. Oxygen OS) after performing a factory reset via TWRP. Since then, I am only able to charge the device through a PC and a portable battery pack, but NOT through any wall charger.
Is this a common and known issue? If so, what are the fixes for the same?
Try another cable or charger.. make it possible to use original stock charger..
Related
I flashed a custom rom a couple of months back. That rom was android version 2.3.5.
Now when I try and connect my phone to my pc using the standard usb cable, it only charges but no connection.
I did some reading before I posted and found several methods to try out
1.Use kies, download drivers
2.Enable USB Debugging mode
3.Go to settings-wireless and network-usb utilities and connect it through there.
None of the methods mentioned above worked.
So my questions to you guys are
1. Does this problem have to do with the custom rom?
2. Can I degrade to the stock rom without the use of an USB cable?
2b Can I update to another custom rom (because the phone charges when it is connected to the pc, even though I cant see it on "my computer", it should still be considered as connected?) ?
3. Which is the best custom rom out right now (Speed and performance wise)
*Side note - I know people prefer different custom roms based on their taste, but I really want to think what you guys think about which one I should upgrade to!!! I also might want to overclock to 1.6 and root the phone in the coming week if I can solve my usb problem!
Have you tried using SwiFTP app on your phone and Filezilla on your pc, then you can transfer files wirelessly
killall said:
Have you tried using SwiFTP app on your phone and Filezilla on your pc, then you can transfer files wirelessly
Click to expand...
Click to collapse
Yes I have but it wasn't what I was looking for. My phone randomly gets usb connected and starts charging without the cable being connected???
I went to the retail store I bought it from and he said you should degrade your firmware and see if the problem goes away, if it doesnt we send it in for repair.
But how can I do that if my usb only charges when I connect to the pc?
There is a Mobile Odin apk. Perhaps you could install that then flash stock firmware with it. You would have to get the .tar onto your phone though.
Unfortunately, if I´m not wrong your trobule seems to be a hardward issue.
My cell phone began a couple of weeks ago with the same problem, and it became even rather serious. Some days ago it didn´t charged if I connected the charger when it was on. I should switch it off and then connect the charger, having done this, the cell rebooted by itsefl and then began charging.
But, just seeking and testing I bought a "charger block replacement" in ebay and replaced it by myself. It is not complex to do it on your own... today I am happyy.. cause I fixed it..
If your problem continue.. I hope you will remember my words!
Hi guys,
Its a bit confusing but I'll try to keep it as short as possible. It seems basically that I can charge fine in recovery and download but not in the ROM. Syncing doesn't work at all except download..
I have an i9100m. Ran NeatROM and RootBOX and dabbled with a few roms.
Now I'm not sure if it was the roms or wear and tear but I had ASSUMED until today that my USB port was messed. It would not even charge from a PC nevertheless mount as a mass storage on my PC. It can charge fine from an AC adapter.
Anyway, today I randomly decided to put my phone into download mode and what do you know, the phone detects, and I even see it in ODIN, so I guess my USB port is not messed afterall. Perhaps something with the ROMs and kernels that messed it up?
I think this was around the same time when my Triangle went away.... (I never removed it). In download mode now, it says:
Custom binary Download: NO
Current Binary: SAMSUNG Official
I'm rooted and not stock at all so I wonder if that's the cause?
I was thinking of downloading a stock TAR of my carrier and flashing through ODIN. Do you guys think this is sufficient to "Reset" it back to how it was all the way before? And then I'll root and go back to one of my trusted roms (and not mess around)
Thanks
Do you use the original USB cable to connect your phone? That could be an issue.
Anyways, I don't think that something is messed up software-side if you tried several ROMs.
Worst case is that the USB port of your phone is damaged =/
Gesendet von meinem GT-I9100 mit Tapatalk 4 Beta
Yes I am using the original cable. (all same result but obviously wanted to use the original just in case)
I was thinking the USB port was damaged too because after reading, I guess apparently I accidentally created a usb jig? (triangle went away + stats wiped...)
But that aside, if my USB port is damaged, how come when I'm in download mode, PC and ODIN detect a device is connected and it charges, whereas within the ROM, I get neither ???
Just an update guys,
I used ODIN to flash completely back to stock... and I still cannot charge from PC. Basically computer doesn't see the phone at all. So it has to be a damaged port.. unless theres something else other than the internal SD that I can wipe????? I wanted to wipe everything..
Still really puzzles me though... that ODIN can see it in Download Mode.
One of the mysteries I guess.
Did you try to clean your mini usb port on the mobile? It could help.
Sent from my GT-I9100 using Tapatalk 2
So....your phone only charges on DL Mode?????
Sent from the little guy
I have tried to blow some air in there.. any other suggestions?
Well, the computer only recognizes the device in download mode, Windows sees the device, otherwise it doesn't.Just strange that I was able to flash an entire stock image through ODIN but in the ROM can't even get the computer to recognize that ANYTHING is plugged in (or the phone to charge so the phone doesn't see anything either)
And again, whats even more strange is that i had that one cheap extendable USB cable that probably messed everything up (it removed my triangle..so I accidentally somehow created a jig?) is able to CHARGE the phone even in ROM but still the computer can't see it as a device. LOL
This is so messed. I guess my main thing is even if I go ahead to replace the USB port (get it repaired), do you guys still think this problem would occur... =\
stx8 said:
I have tried to blow some air in there.. any other suggestions?
Well, the computer only recognizes the device in download mode, Windows sees the device, otherwise it doesn't.. =\
Click to expand...
Click to collapse
I currently have the exact same problem, except for the flaky usb cable removing your triangle. Mine is still there.
I brought my S2 to a repair shop because i was sure it was my USB port, but the guy there told me it connected in download mode just fine so the USB port should be fine.
Here is what I tried so far
- cleaned USB port
- Used diferent cables
- Used different PC's
- Used different kernals
- Used different roms
- Re-formated/cleared/wiped everything I could find.
Did anyone find a solution? Should I still have my USB port replaced?
Wired99 said:
I currently have the exact same problem, except for the flaky usb cable removing your triangle. Mine is still there.
I brought my S2 to a repair shop because i was sure it was my USB port, but the guy there told me it connected in download mode just fine so the USB port should be fine.
Here is what I tried so far
- cleaned USB port
- Used diferent cables
- Used different PC's
- Used different kernals
- Used different roms
- Re-formated/cleared/wiped everything I could find.
Did anyone find a solution? Should I still have my USB port replaced?
Click to expand...
Click to collapse
did u tried to change the usb port ,because download mode doesn't require a battery ,u can try to go to download mode then remove the battery and u will still in it
hardware problem
Hi everybody, my phone has a weird issue:
* Phone is recognized in fastboot mode by the PC, doesn't matter the Android version installed in the device.
* Battery lasts as if the phone was new. 10 hours of SOT, 2 full days of using the device.
* If I Install MIUI 9 (based on Android 7.x) or a custom ROM based on Nougat, the phone works and charges normally
* BUT If I install MIUI10 (based on Android 8.x) or any custom ROM based on Oreo, the phone works and charges normally; after 2 or 3 days the phone doesn't charge anymore while powered on, and the phone is not recognized by any PC. If the phone is powered off and connected to a charger or computer, it shows the battery animation but the percentage never goes up. Some times if you connect the USB cable and reboot the device, it detects the cable but doesnt charge. (Ampere shows the device as "connected" but "not charging").
Every time that this has happened, I solved it returning to the latest MIUI 9 stable ROM using MiFlash, the problem dissapear and it works and charges flawlessly. But every time I install a 8.1 rom, including the MIUI10 Global Developer ROM, the problem returns after 2 or 3 days.
Tried replacing wall chargers, tried changing USB cables, tried with different computers. Hardware doesn't seem to be the problem here (at least the chargers, cables and the usb por "per se").
What is happening? Anyone else is having this problem?
Flash Latest Firmware
Flash the latest firmware 8.7.19/8.7.12 or at least 8.4.19.
Flash any of this firmware before flashing custom roms and u'll be good to go.no problems will occur..i' ll also suggest to make a miui stable fastboot flash (of course with 'clean all' option) before flashing any custom rom.just give a fresh try.there will be no problem.
Hello
I made a thread on reddit in the subreddit of my ROM (/r/LineageOS/comments/cccbtu/pc_does_not_detect_xiaomi_redmi_note_4/) regarding my issue and they recommended that I come here (I hope that's the right place.)
In summary, the notification that usually shows when I plug in my phone, to change the USB configuration from charging to MTP, does not show.
I've tried everything I can think of (different ports, PCs, cables, etc.) and nothing seems to help.
"adb devices" shows no devices both on normal boot and TWRP. The only thing the cable does is charge.
I'd be very happy to fix it.
Thank you!
First it's a software issue so the hardware is fine
Second i suggest getting an sd card with the official stock rom on it (version 10.1.1.0) to fix the reading error since it can't be readed even on twrp
If the problem still presists
I suggest to change the cable or the phone socket
Try another cable then see
I have a H96 Pro Plus 3G32G ZH01-S912TVBOX-V3.0 with a green board and 7.1 firmware.
I suddenly stopped turning on, so after some research I found a solution of replacing the capacitor to 1000mf at the DC jack. Now it turns on but, wont boot. TWRP recovery was loading to splash screen but blacked out after that. I tried using the USB burning tool to flash the firmware, but it gets stuck on 7%. The SD card method also stopped at the same place and the device just powers off.
After trying a number of times with a few different firmwares, the SD card no longer boots at all and the USB burning tool still stops at 7% formatting.
I have a full TWRP backup of my stock firmware, but no way to restore it. This is the TWRP filename in case this helps.
2019-05-19--07-24-49_q201_9377-userdebug_7.1.2_NHG47L_20171020_t
Is there any way to make something flash to the device? Even if I can just get the recovery or bootloader working so that I can flash the backup.
Thanks for your help.
Here are some photos of the board.
From the log file, it's look like unstable usb connection, have you tried other usb male to male cable? the shorter the better
keatoncray said:
From the log file, it's look like unstable usb connection, have you tried other usb male to male cable? the shorter the better
Click to expand...
Click to collapse
It's one I've used on numerous occasions with other World Cup devices in the past. It has always worked with other devices, it seems more like a problem with the device.
beachbouy said:
I have a H96 Pro Plus 3G32G ZH01-S912TVBOX-V3.0 with a green board and 7.1 firmware.
I suddenly stopped turning on, so after some research I found a solution of replacing the capacitor to 1000mf at the DC jack. Now it turns on but, wont boot. TWRP recovery was loading to splash screen but blacked out after that. I tried using the USB burning tool to flash the firmware, but it gets stuck on 7%. The SD card method also stopped at the same place and the device just powers off.
After trying a number of times with a few different firmwares, the SD card no longer boots at all and the USB burning tool still stops at 7% formatting.
I have a full TWRP backup of my stock firmware, but no way to restore it. This is the TWRP filename in case this helps.
2019-05-19--07-24-49_q201_9377-userdebug_7.1.2_NHG47L_20171020_t
Is there any way to make something flash to the device? Even if I can just get the recovery or bootloader working so that I can flash the backup.
Thanks for your help.
Click to expand...
Click to collapse
From where you found solution to change its capacitor. Was it necessary. Being an Engineer, i dont think that it could be a capacitor rather faulty usb ports or power adaptor
awaisiqbal said:
From where you found solution to change its capacitor. Was it necessary. Being an Engineer, i dont think that it could be a capacitor rather faulty usb ports or power adaptor
Click to expand...
Click to collapse
It was on freaktab. The original problem was the box not turning on and the new capacitor worked for that. But unfortunately I found that solution after I had already tried to install the firmware unsuccessfully so the box is bricked. It would probably be fine if I had not tried to flash the firmware.